From: Jayesh Choudhary <j-choudhary@ti.com>
Date: Wed, 16 Jul 2025 06:01:14 +0000 (+0530)
Subject: arm64: dts: ti: k3-am68-sk: Enable DSI on DisplayPort-0
X-Git-Tag: v6.18-rc1~147^2~17^2~71
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=11b9e4517bfa8edecbef0acfcad1bdca4f4a4192;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: ti: k3-am68-sk: Enable DSI on DisplayPort-0

Enable DSI support for AM68-SK platform.

Add DT node for DSI2eDP bridge. The DSI to eDP bridge is sn65dsi86
on the board.

Add the endpoint nodes to describe connection from:
DSS => DSI => SN65DSI86 bridge => DisplayPort-0

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250716060114.52122-8-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index e84c504c87d26..75a107456ce1d 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -135,6 +135,34 @@
 		max-bitrate = <5000000>;
 	};
 
+	edp0_refclk: clock-edp0-refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+		#clock-cells = <0>;
+	};
+
+	dp0_pwr_3v3: regulator-dp0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "dp0-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;     /*P0 - DP0_3V3 _EN */
+		enable-active-high;
+	};
+
+	dp0: dp0-connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp0_pwr_3v3>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
 	connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -615,6 +643,39 @@
 		gpio-line-names = "HDMI_PDn","HDMI_LS_OE",
 				  "DP0_3V3_EN","eDP_ENABLE";
 	};
+
+	bridge_dsi_edp: bridge-dsi-edp@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clock-names = "refclk";
+		clocks = <&edp0_refclk>;
+		enable-gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+		vpll-supply = <&vsys_io_1v8>;
+		vccio-supply = <&vsys_io_1v8>;
+		vcca-supply = <&vsys_io_1v2>;
+		vcc-supply = <&vsys_io_1v2>;
+
+		dsi_edp_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp0_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				dp0_out: endpoint {
+					remote-endpoint = <&dp0_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &main_sdhci1 {
@@ -711,6 +772,15 @@
 			remote-endpoint = <&tfp410_in>;
 		};
 	};
+
+	/* DSI */
+	port@2 {
+		reg = <2>;
+
+		dpi0_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
 };
 
 &serdes_ln_ctrl {
@@ -768,3 +838,30 @@
 	phys = <&serdes0_usb_link>;
 	phy-names = "cdns3,usb3-phy";
 };
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&dsi0_ports {
+
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+};