From: Igor Pylypiv Date: Thu, 14 Aug 2025 02:22:56 +0000 (-0700) Subject: ata: libata-scsi: Fix CDL control X-Git-Tag: v6.12.44~270 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=12e65070d23c79d2610e892a1ce377fe4e72b878;p=thirdparty%2Fkernel%2Fstable.git ata: libata-scsi: Fix CDL control commit 58768b0563916ddcb73d8ed26ede664915f8df31 upstream. Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent SET FEATURES command from being issued to a drive when NCQ commands are active. ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES gets deferred due to outstanding NCQ commands, the original MODE SELECT command will be re-queued. When the re-queued MODE SELECT goes through the ata_mselect_control_ata_feature() translation again, SET FEATURES will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or cleared by the initial translation of MODE SELECT. The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature() are safe to remove because scsi_cdl_enable() implements a similar logic that avoids enabling CDL if it has been enabled already. Fixes: 17e897a45675 ("ata: libata-scsi: Improve CDL control") Cc: stable@vger.kernel.org Signed-off-by: Igor Pylypiv Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index cf7ca3c9eca28..72819da71930d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3752,21 +3752,16 @@ static int ata_mselect_control_ata_feature(struct ata_queued_cmd *qc, /* Check cdl_ctrl */ switch (buf[0] & 0x03) { case 0: - /* Disable CDL if it is enabled */ - if (!(dev->flags & ATA_DFLAG_CDL_ENABLED)) - return 0; + /* Disable CDL */ ata_dev_dbg(dev, "Disabling CDL\n"); cdl_action = 0; dev->flags &= ~ATA_DFLAG_CDL_ENABLED; break; case 0x02: /* - * Enable CDL if not already enabled. Since this is mutually - * exclusive with NCQ priority, allow this only if NCQ priority - * is disabled. + * Enable CDL. Since CDL is mutually exclusive with NCQ + * priority, allow this only if NCQ priority is disabled. */ - if (dev->flags & ATA_DFLAG_CDL_ENABLED) - return 0; if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) { ata_dev_err(dev, "NCQ priority must be disabled to enable CDL\n");