From: Jaroslav Kysela <perex@perex.cz>
Date: Thu, 15 Jan 2015 13:12:56 +0000 (+0100)
Subject: doc: add more text to Skip initial Scan - networks
X-Git-Tag: v4.1~474
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=2820a7cf41d8c1f9279cdcf95fdc0e375d0eeab0;p=thirdparty%2Ftvheadend.git

doc: add more text to Skip initial Scan - networks
---

diff --git a/docs/html/config_networks.html b/docs/html/config_networks.html
index 0db10096d..bf5bd26b5 100644
--- a/docs/html/config_networks.html
+++ b/docs/html/config_networks.html
@@ -55,7 +55,11 @@ Buttons have the following functions:
 		<dd>Whether automatic discovery is enabled for this network, i.e. whether Tvheadend looks for muxes or simply stays with the list of muxes as defined initially.
 <p>
 		<dt><b>Skip initial Scan</b>
-		<dd>Don't scan this network for muxes at Tvheadend start.
+		<dd>Don't scan all muxes in this network at Tvheadend start.
+		The initial scan procedure is not a blind scan. Only known muxes
+		registered to this network are scanned. If Network Discovery
+		is enabled and new muxes are discovered using DVB
+		descriptors, these muxes will be scanned too.
 <p>
 		<dt><b>Idle Scan Muxes</b>
 		<dd>When nothing else happens Tvheadend will continuously rotate among all muxes and tune to them to verify that they are still working
diff --git a/docs/html/config_tvadapters.html b/docs/html/config_tvadapters.html
index c1a4e3a60..b0ae60816 100644
--- a/docs/html/config_tvadapters.html
+++ b/docs/html/config_tvadapters.html
@@ -32,7 +32,8 @@ The rows have the following functions
   <dd>Associate this device with one or more networks.</dd>
 <p>
   <dt><b>Init Scan</b></dt>
-  <dd>Allow the initial scan tuning on this device.</dd>
+  <dd>Allow the initial scan tuning on this device. See to
+  Skip initial Scan in the network settings for the further description.</dd>
 <p>
   <dt><b>Idle Scan</b></dt>
   <dd>Allow the idle scan tuning on this device.</dd>