From: Jayesh Choudhary <j-choudhary@ti.com>
Date: Wed, 16 Jul 2025 06:01:13 +0000 (+0530)
Subject: arm64: dts: ti: k3-j721s2-common-proc-board: Enable DisplayPort-1
X-Git-Tag: v6.18-rc1~147^2~17^2~72
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=2bca9f69225e8c6e3c270f20c69a1460761f9bd2;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: ti: k3-j721s2-common-proc-board: Enable DisplayPort-1

Enable DSI display for J721S2 EVM.

Add the endpoint nodes to describe connection from:
DSS => DSI Bridge => DSI to eDP bridge => DisplayPort-1

Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250716060114.52122-7-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
---

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 793d50344fade..9e43dcff8ef22 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -93,6 +93,28 @@
 			 <3300000 0x1>;
 	};
 
+	dp1_pwr_3v3: regulator-dp1-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp1-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 1 GPIO_ACTIVE_HIGH>; /* P1 - DP1_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp1: connector-dp1 {
+		compatible = "dp-connector";
+		label = "DP1";
+		type = "full-size";
+		dp-pwr-supply = <&dp1_pwr_3v3>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&dp1_out>;
+			};
+		};
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1043";
 		#phy-cells = <0>;
@@ -563,3 +585,74 @@
 	pinctrl-0 = <&main_mcan5_pins_default>;
 	phys = <&transceiver4>;
 };
+
+&dss {
+	/*
+	 * DSS on J721S2-EVM supports DP on VP0 and DSI on VP2.
+	 * These clock assignments are chosen to enable the following outputs:
+	 * VP0 - DisplayPort SST
+	 * VP2 - DSI
+	 */
+	status = "okay";
+	assigned-clocks = <&k3_clks 158 2>,
+			  <&k3_clks 158 14>;
+	assigned-clock-parents = <&k3_clks 158 3>,
+				 <&k3_clks 158 16>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@2 {
+		reg = <2>;
+
+		dpi2_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
+};
+
+&dsi0_ports {
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp1_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi2_out>;
+		};
+	};
+};
+
+&dsi_edp_bridge_ports {
+	port@0 {
+		reg = <0>;
+
+		dp1_in: endpoint {
+			remote-endpoint = <&dsi0_out>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dp1_out: endpoint {
+			remote-endpoint = <&dp1_connector_in>;
+		};
+	};
+};
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+};