From: Yu Watanabe Date: Sun, 4 Aug 2024 01:38:21 +0000 (+0900) Subject: basic/linux: update kernel headers from v6.11-rc1 X-Git-Tag: v257-rc1~741^2 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=2e308032f41581a479565291dbb9317a87fa93bd;p=thirdparty%2Fsystemd.git basic/linux: update kernel headers from v6.11-rc1 --- diff --git a/src/basic/linux/bpf.h b/src/basic/linux/bpf.h index 858a89984ec..f4d7e495dd0 100644 --- a/src/basic/linux/bpf.h +++ b/src/basic/linux/bpf.h @@ -1425,6 +1425,8 @@ enum { #define BPF_F_TEST_RUN_ON_CPU (1U << 0) /* If set, XDP frames will be transmitted after processing */ #define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1) +/* If set, apply CHECKSUM_COMPLETE to skb and validate the checksum */ +#define BPF_F_TEST_SKB_CHECKSUM_COMPLETE (1U << 2) /* type for BPF_ENABLE_STATS */ enum bpf_stats_type { @@ -6207,12 +6209,17 @@ union { \ __u64 :64; \ } __attribute__((aligned(8))) +/* The enum used in skb->tstamp_type. It specifies the clock type + * of the time stored in the skb->tstamp. + */ enum { - BPF_SKB_TSTAMP_UNSPEC, - BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */ - /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle, - * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC - * and try to deduce it by ingress, egress or skb->sk->sk_clockid. + BPF_SKB_TSTAMP_UNSPEC = 0, /* DEPRECATED */ + BPF_SKB_TSTAMP_DELIVERY_MONO = 1, /* DEPRECATED */ + BPF_SKB_CLOCK_REALTIME = 0, + BPF_SKB_CLOCK_MONOTONIC = 1, + BPF_SKB_CLOCK_TAI = 2, + /* For any future BPF_SKB_CLOCK_* that the bpf prog cannot handle, + * the bpf prog can try to deduce it by ingress/egress/skb->sk->sk_clockid. */ }; diff --git a/src/basic/linux/btrfs_tree.h b/src/basic/linux/btrfs_tree.h index ae5e4be8879..86242120a71 100644 --- a/src/basic/linux/btrfs_tree.h +++ b/src/basic/linux/btrfs_tree.h @@ -743,21 +743,9 @@ struct btrfs_raid_stride { __le64 physical; } __attribute__ ((__packed__)); -/* The stripe_extent::encoding, 1:1 mapping of enum btrfs_raid_types. */ -#define BTRFS_STRIPE_RAID0 1 -#define BTRFS_STRIPE_RAID1 2 -#define BTRFS_STRIPE_DUP 3 -#define BTRFS_STRIPE_RAID10 4 -#define BTRFS_STRIPE_RAID5 5 -#define BTRFS_STRIPE_RAID6 6 -#define BTRFS_STRIPE_RAID1C3 7 -#define BTRFS_STRIPE_RAID1C4 8 - struct btrfs_stripe_extent { - __u8 encoding; - __u8 reserved[7]; /* An array of raid strides this stripe is composed of. */ - struct btrfs_raid_stride strides[]; + __DECLARE_FLEX_ARRAY(struct btrfs_raid_stride, strides); } __attribute__ ((__packed__)); #define BTRFS_HEADER_FLAG_WRITTEN (1ULL << 0) @@ -773,6 +761,14 @@ struct btrfs_stripe_extent { #define BTRFS_SUPER_FLAG_CHANGING_FSID (1ULL << 35) #define BTRFS_SUPER_FLAG_CHANGING_FSID_V2 (1ULL << 36) +/* + * Those are temporaray flags utilized by btrfs-progs to do offline conversion. + * They are rejected by kernel. + * But still keep them all here to avoid conflicts. + */ +#define BTRFS_SUPER_FLAG_CHANGING_BG_TREE (1ULL << 38) +#define BTRFS_SUPER_FLAG_CHANGING_DATA_CSUM (1ULL << 39) +#define BTRFS_SUPER_FLAG_CHANGING_META_CSUM (1ULL << 40) /* * items in the extent btree are used to record the objectid of the diff --git a/src/basic/linux/ethtool.h b/src/basic/linux/ethtool.h index 1a7169b59df..5aa2ae0a4bb 100644 --- a/src/basic/linux/ethtool.h +++ b/src/basic/linux/ethtool.h @@ -750,6 +750,197 @@ enum ethtool_module_power_mode { ETHTOOL_MODULE_POWER_MODE_HIGH, }; +/** + * enum ethtool_c33_pse_ext_state - groups of PSE extended states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted + * states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states + * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states + * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type + * states + * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available + * states + * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states + */ +enum ethtool_c33_pse_ext_state { + ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1, + ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID, + ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM, + ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED, + ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE, + ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE, + ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload + * state + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not + * connected + * + * The PSE monitors either the DC or AC Maintain Power Signature + * (MPS, see 33.2.9.1). This variable indicates the presence or absence of + * a valid MPS. + */ +enum ethtool_c33_pse_ext_substate_mr_mps_valid { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN, +}; + +/** + * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing + * port number + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal + * hardware fault + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON: + * Communication error after force on + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown + * port status + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host + * crash turn off + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN: + * Host crash force shutdown + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration + * change + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over + * temperature detected + * + * error_condition is a variable indicating the status of + * implementation-specific fault conditions or optionally other system faults + * that prevent the PSE from meeting the specifications in Table 33–11 and that + * require the PSE not to source power. These error conditions are different + * from those monitored by the state diagrams in Figure 33–10. + */ +enum ethtool_c33_pse_ext_substate_error_condition { + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable + * pin active + * + * mr_pse_enable is control variable that selects PSE operation and test + * functions. + */ +enum ethtool_c33_pse_ext_substate_mr_pse_enable { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection + * in process + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR: + * Connection check error + * + * option_detect_ted is a variable indicating if detection can be performed + * by the PSE during the ted_timer interval. + */ +enum ethtool_c33_pse_ext_substate_option_detect_ted { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply + * voltage is high + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply + * voltage is low + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage + * injection into the port + * + * option_vport_lim is an optional variable indicates if VPSE is out of the + * operating range during normal operating state. + */ +enum ethtool_c33_pse_ext_substate_option_vport_lim { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION, +}; + +/** + * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state + * + * ovld_detected is a variable indicating if the PSE output current has been + * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second + * sliding time. + */ +enum ethtool_c33_pse_ext_substate_ovld_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power + * budget exceeded for the controller + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET: + * Configured port power limit exceeded controller power budget + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT: + * Power request from PD exceeds port limit + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power + * denied due to Hardware power limit + * + * power_not_available is a variable that is asserted in an + * implementation-dependent manner when the PSE is no longer capable of + * sourcing sufficient power to support the attached PD. Sufficient power + * is defined by classification; see 33.2.6. + */ +enum ethtool_c33_pse_ext_substate_power_not_available { + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT, +}; + +/** + * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short + * condition was detected + * + * short_detected is a variable indicating if the PSE output current has been + * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7). + */ +enum ethtool_c33_pse_ext_substate_short_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1, +}; + /** * enum ethtool_pse_types - Types of PSE controller. * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown @@ -875,6 +1066,24 @@ enum ethtool_mm_verify_status { ETHTOOL_MM_VERIFY_STATUS_DISABLED, }; +/** + * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status + * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has + * started. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process + * is in progress. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was + * completed successfully. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was + * stopped due to an error. + */ +enum ethtool_module_fw_flash_status { + ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1, + ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS, + ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED, + ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR, +}; + /** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS @@ -1843,6 +2052,7 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99, ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100, ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101, + ETHTOOL_LINK_MODE_10baseT1BRR_Full_BIT = 102, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS diff --git a/src/basic/linux/in.h b/src/basic/linux/in.h index 7bdd6843c01..43cfcb010cc 100644 --- a/src/basic/linux/in.h +++ b/src/basic/linux/in.h @@ -81,6 +81,8 @@ enum { #define IPPROTO_ETHERNET IPPROTO_ETHERNET IPPROTO_RAW = 255, /* Raw IP packets */ #define IPPROTO_RAW IPPROTO_RAW + IPPROTO_SMC = 256, /* Shared Memory Communications */ +#define IPPROTO_SMC IPPROTO_SMC IPPROTO_MPTCP = 262, /* Multipath TCP connection */ #define IPPROTO_MPTCP IPPROTO_MPTCP IPPROTO_MAX diff --git a/src/basic/linux/netfilter/nf_tables.h b/src/basic/linux/netfilter/nf_tables.h index aa4094ca244..639894ed1b9 100644 --- a/src/basic/linux/netfilter/nf_tables.h +++ b/src/basic/linux/netfilter/nf_tables.h @@ -1376,7 +1376,7 @@ enum nft_secmark_attributes { #define NFTA_SECMARK_MAX (__NFTA_SECMARK_MAX - 1) /* Max security context length */ -#define NFT_SECMARK_CTX_MAXLEN 256 +#define NFT_SECMARK_CTX_MAXLEN 4096 /** * enum nft_reject_types - nf_tables reject expression reject types diff --git a/src/basic/linux/nl80211.h b/src/basic/linux/nl80211.h index f917bc6c9b6..f97f5adc8d5 100644 --- a/src/basic/linux/nl80211.h +++ b/src/basic/linux/nl80211.h @@ -2052,6 +2052,10 @@ enum nl80211_commands { * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes * defined in &enum nl80211_if_combination_attrs. + * If the wiphy uses multiple radios (@NL80211_ATTR_WIPHY_RADIOS is set), + * this attribute contains the interface combinations of the first radio. + * See @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS for the global wiphy + * combinations for the sum of all radios. * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that * are managed in software: interfaces of these types aren't subject to @@ -2856,6 +2860,14 @@ enum nl80211_commands { * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs * are used on this connection * + * @NL80211_ATTR_WIPHY_RADIOS: Nested attribute describing physical radios + * belonging to this wiphy. See &enum nl80211_wiphy_radio_attrs. + * + * @NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS: Nested attribute listing the + * supported interface combinations for all radios combined. In each + * nested item, it contains attributes defined in + * &enum nl80211_if_combination_attrs. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3401,6 +3413,9 @@ enum nl80211_attrs { NL80211_ATTR_ASSOC_SPP_AMSDU, + NL80211_ATTR_WIPHY_RADIOS, + NL80211_ATTR_WIPHY_INTERFACE_COMBINATIONS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -4277,6 +4292,8 @@ enum nl80211_wmm_rule { * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor * mode despite other (regulatory) restrictions, even if the channel is * otherwise completely disabled. + * @NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP: This channel can be used for a + * very low power (VLP) AP, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4320,6 +4337,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT, NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, NL80211_FREQUENCY_ATTR_CAN_MONITOR, + NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4529,6 +4547,8 @@ enum nl80211_sched_scan_match_attr { * Should be used together with %NL80211_RRF_DFS only. * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed + * @NL80211_RRF_ALLOW_6GHZ_VLP_AP: Very low power (VLP) AP can be permitted + * despite NO_IR configuration. */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4553,6 +4573,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_DFS_CONCURRENT = 1<<21, NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, + NL80211_RRF_ALLOW_6GHZ_VLP_AP = 1<<24, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -7999,4 +8020,54 @@ enum nl80211_ap_settings_flags { NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, }; +/** + * enum nl80211_wiphy_radio_attrs - wiphy radio attributes + * + * @__NL80211_WIPHY_RADIO_ATTR_INVALID: Invalid + * + * @NL80211_WIPHY_RADIO_ATTR_INDEX: Index of this radio (u32) + * @NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE: Frequency range supported by this + * radio. Attribute may be present multiple times. + * @NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION: Supported interface + * combination for this radio. Attribute may be present multiple times + * and contains attributes defined in &enum nl80211_if_combination_attrs. + * + * @__NL80211_WIPHY_RADIO_ATTR_LAST: Internal + * @NL80211_WIPHY_RADIO_ATTR_MAX: Highest attribute + */ +enum nl80211_wiphy_radio_attrs { + __NL80211_WIPHY_RADIO_ATTR_INVALID, + + NL80211_WIPHY_RADIO_ATTR_INDEX, + NL80211_WIPHY_RADIO_ATTR_FREQ_RANGE, + NL80211_WIPHY_RADIO_ATTR_INTERFACE_COMBINATION, + + /* keep last */ + __NL80211_WIPHY_RADIO_ATTR_LAST, + NL80211_WIPHY_RADIO_ATTR_MAX = __NL80211_WIPHY_RADIO_ATTR_LAST - 1, +}; + +/** + * enum nl80211_wiphy_radio_freq_range - wiphy radio frequency range + * + * @__NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID: Invalid + * + * @NL80211_WIPHY_RADIO_FREQ_ATTR_START: Frequency range start (u32). + * The unit is kHz. + * @NL80211_WIPHY_RADIO_FREQ_ATTR_END: Frequency range end (u32). + * The unit is kHz. + * + * @__NL80211_WIPHY_RADIO_FREQ_ATTR_LAST: Internal + * @NL80211_WIPHY_RADIO_FREQ_ATTR_MAX: Highest attribute + */ +enum nl80211_wiphy_radio_freq_range { + __NL80211_WIPHY_RADIO_FREQ_ATTR_INVALID, + + NL80211_WIPHY_RADIO_FREQ_ATTR_START, + NL80211_WIPHY_RADIO_FREQ_ATTR_END, + + __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST, + NL80211_WIPHY_RADIO_FREQ_ATTR_MAX = __NL80211_WIPHY_RADIO_FREQ_ATTR_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */