From: Alexey Charkov <alchark@gmail.com>
Date: Tue, 12 Aug 2025 20:30:25 +0000 (+0400)
Subject: arm64: dts: rockchip: Add Bluetooth on rk3576-evb1-v10
X-Git-Tag: v6.18-rc1~147^2~47^2~18
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=34f7620912bb0f881a23dfea529e69fd2e8fdcf2;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: rockchip: Add Bluetooth on rk3576-evb1-v10

Add device tree nodes to enable Bluetooth in the Ampak AP6275P module
found on Rockchip RK3576 EVB1 and connected over a UART link.

Note that this doesn't enable the out-of-band PCM connection. It's
routed to SAI2 M0 pins in case anyone wishes to add it.

Tested-by: Pavel Zhovner <pavel@flipperdevices.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250813-evb1-rtcwifibt-v1-3-d13c83422971@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---

diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
index 1adbbcc1c569a..439831715cbb5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
@@ -766,6 +766,20 @@
 };
 
 &pinctrl {
+	bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	hym8563 {
 		rtc_int: rtc-int {
 			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -855,6 +869,27 @@
 	status = "okay";
 };
 
+&uart4 {
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
 &ufshc {
 	status = "okay";
 };