From: Aleksandar Gerasimovski Date: Mon, 11 Aug 2025 13:09:04 +0000 (+0000) Subject: iio/adc/pac1934: fix channel disable configuration X-Git-Tag: v6.18-rc1~74^2~14^2~6 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=3c63ba1c430af1c0dcd68dd36f2246980621dcba;p=thirdparty%2Fkernel%2Flinux.git iio/adc/pac1934: fix channel disable configuration There are two problems with the chip configuration in this driver: - First, is that writing 12 bytes (ARRAY_SIZE(regs)) would anyhow lead to a config overflow due to HW auto increment implementation in the chip. - Second, the i2c_smbus_write_block_data write ends up in writing unexpected value to the channel_dis register, this is because the smbus size that is 0x03 in this case gets written to the register. The PAC1931/2/3/4 data sheet does not really specify that block write is indeed supported. This problem is probably not visible on PAC1934 version where all channels are used as the chip is properly configured by luck, but in our case whenusing PAC1931 this leads to nonfunctional device. Fixes: 0fb528c8255b (iio: adc: adding support for PAC193x) Suggested-by: Rene Straub Signed-off-by: Aleksandar Gerasimovski Reviewed-by: Marius Cristea Link: https://patch.msgid.link/20250811130904.2481790-1-aleksandar.gerasimovski@belden.com Cc: Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/adc/pac1934.c b/drivers/iio/adc/pac1934.c index 09fe88eb3fb04..2e442e46f6797 100644 --- a/drivers/iio/adc/pac1934.c +++ b/drivers/iio/adc/pac1934.c @@ -88,6 +88,7 @@ #define PAC1934_VPOWER_3_ADDR 0x19 #define PAC1934_VPOWER_4_ADDR 0x1A #define PAC1934_REFRESH_V_REG_ADDR 0x1F +#define PAC1934_SLOW_REG_ADDR 0x20 #define PAC1934_CTRL_STAT_REGS_ADDR 0x1C #define PAC1934_PID_REG_ADDR 0xFD #define PAC1934_MID_REG_ADDR 0xFE @@ -1265,8 +1266,23 @@ static int pac1934_chip_configure(struct pac1934_chip_info *info) /* no SLOW triggered REFRESH, clear POR */ regs[PAC1934_SLOW_REG_OFF] = 0; - ret = i2c_smbus_write_block_data(client, PAC1934_CTRL_STAT_REGS_ADDR, - ARRAY_SIZE(regs), (u8 *)regs); + /* + * Write the three bytes sequentially, as the device does not support + * block write. + */ + ret = i2c_smbus_write_byte_data(client, PAC1934_CTRL_STAT_REGS_ADDR, + regs[PAC1934_CHANNEL_DIS_REG_OFF]); + if (ret) + return ret; + + ret = i2c_smbus_write_byte_data(client, + PAC1934_CTRL_STAT_REGS_ADDR + PAC1934_NEG_PWR_REG_OFF, + regs[PAC1934_NEG_PWR_REG_OFF]); + if (ret) + return ret; + + ret = i2c_smbus_write_byte_data(client, PAC1934_SLOW_REG_ADDR, + regs[PAC1934_SLOW_REG_OFF]); if (ret) return ret;