From: B, Ravi <ravibabu@ti.com>
Date: Thu, 28 Jul 2016 12:09:14 +0000 (+0530)
Subject: spl: dfu: add dfu support in SPL
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=3cd4d7fcdcfcdc41e445d32445d489a41d198210;p=thirdparty%2Fu-boot.git

spl: dfu: add dfu support in SPL

Traditionally the DFU support is available only
as part 2nd stage boot loader(u-boot) and DFU
is not supported in SPL.

The SPL-DFU feature is useful for boards which
does not have MMC/SD, ethernet boot mechanism
to boot the board and only has USB inteface.

This patch add DFU support in SPL with RAM
memory device support to load and execute u-boot.
And then leverage full functionality DFU in
u-boot to flash boot inital binary images to
factory or bare-metal boards to memory devices
like SPI, eMMC, MMC/SD card using USB interface.

This SPL-DFU support can be enabled through
Menuconfig->Boot Images->Enable SPL-DFU support

Signed-off-by: Ravi Babu <ravibabu@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/Kconfig b/Kconfig
index 114b3a21d34..2ae065ca813 100644
--- a/Kconfig
+++ b/Kconfig
@@ -313,6 +313,33 @@ config SPL_LOAD_FIT
 	  particular it can handle selecting from multiple device tree
 	  and passing the correct one to U-Boot.
 
+config SPL_DFU_SUPPORT
+	bool "Enable SPL with DFU to load binaries to memory device"
+	depends on USB
+	help
+	  Currently the SPL does not have capability to load the
+	  binaries or boot images to boot devices like ram,eMMC,SPI,etc.
+	  This feature enables the DFU (Device Firmware Upgarde) in SPL with
+	  RAM memory device support. The ROM code will load and execute
+	  the SPL built with dfu. The user can load binaries (u-boot/kernel) to
+	  selected device partition from host-pc using dfu-utils.
+		This feature will be useful to flash the binaries to factory
+	  or bare-metal boards using USB interface.
+
+choice
+	bool "DFU device selection"
+	depends on SPL_DFU_SUPPORT
+
+config SPL_DFU_RAM
+	bool "RAM device"
+	depends on SPL_DFU_SUPPORT
+	help
+	 select RAM/DDR memory device for loading binary images
+	 (u-boot/kernel) to the selected device partition using
+	 DFU and execute the u-boot/kernel from RAM.
+
+endchoice
+
 config SYS_CLK_FREQ
 	depends on ARC || ARCH_SUNXI
 	int "CPU clock frequency"
diff --git a/common/Makefile b/common/Makefile
index e08cd3e74d7..7a7a1b4b251 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
 endif # !CONFIG_SPL_BUILD
 
 ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
 obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
 obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index d392e45c86c..1f26f6e73ba 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -56,6 +56,10 @@ libs-y += common/init/
 libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
 libs-y += drivers/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/dfu/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/gadget/udc/
+libs-$(CONFIG_SPL_DFU_SUPPORT) += drivers/usb/dwc3/
 libs-y += dts/
 libs-y += fs/
 libs-$(CONFIG_SPL_FPGA_SUPPORT) += drivers/fpga/