From: Sayali Lokhande <quic_sayalil@quicinc.com>
Date: Wed, 16 Jul 2025 08:51:24 +0000 (+0530)
Subject: arm64: dts: qcom: qcs8300: Add eMMC support
X-Git-Tag: v6.18-rc1~147^2~32^2~143
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=43b8556e82f38cc2e7a66c9dd44d1104be4fe73c;p=thirdparty%2Fkernel%2Flinux.git

arm64: dts: qcom: qcs8300: Add eMMC support

Add eMMC support for qcs8300 board.

Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250716085125.27169-2-quic_sayalil@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
---

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 7d38ddd2cc9e4..3cf1d4bc7e4af 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -4120,6 +4120,69 @@
 			clock-names = "apb_pclk";
 		};
 
+		sdhc_1: mmc@87c4000 {
+			compatible = "qcom,qcs8300-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>,
+			      <0x0 0x087c5000 0x0 0x1000>;
+			reg-names = "hc",
+				    "cqhci";
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x0 0x0>;
+			interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x000f64ee>;
+			qcom,ddr-config = <0x80040868>;
+			supports-cqe;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		usb_1_hsphy: phy@8904000 {
 			compatible = "qcom,qcs8300-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -5325,6 +5388,56 @@
 				pins = "gpio13";
 				function = "qup2_se0";
 			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-bus-hold;
+				};
+			};
 		};
 
 		sram: sram@146d8000 {