From: Antony Kurniawan Soemardi Date: Sun, 22 Jun 2025 18:26:44 +0000 (+0000) Subject: ARM: dts: qcom: msm8960: disable gsbi1 and gsbi5 nodes in msm8960 dtsi X-Git-Tag: v6.18-rc1~147^2~33^2~11 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=45f5d1dc6ff3b2b80e92071b507bee77c86f6ad6;p=thirdparty%2Flinux.git ARM: dts: qcom: msm8960: disable gsbi1 and gsbi5 nodes in msm8960 dtsi Not all devices use gsbi1 and gsbi5, so these nodes should be disabled in the SoC dtsi, following the existing pattern used for gsbi3. The upstream samsung-expressatt and msm8960-cdp devices already have status "okay" for these nodes, so this change should not break existing functionality. This eliminates the following error messages when gsbi nodes are not configured in the board's device tree: [ 1.109723] gsbi 16000000.gsbi: missing mode configuration [ 1.109797] gsbi 16000000.gsbi: probe with driver gsbi failed with error -22 (Note: Xperia SP doesn't use gsbi5) Signed-off-by: Antony Kurniawan Soemardi Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-3-340a5e8f7df0@smankusors.com Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index cf0b1da230f13..6e272d5345a85 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -322,6 +322,8 @@ syscon-tcsr = <&tcsr>; + status = "disabled"; + gsbi5_serial: serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, @@ -445,6 +447,8 @@ #size-cells = <1>; ranges; + status = "disabled"; + gsbi1_spi: spi@16080000 { compatible = "qcom,spi-qup-v1.1.1"; #address-cells = <1>;