From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 6 Nov 2015 09:58:55 +0000 (+0100)
Subject: ARM64: zynqmp: Set factory-fout of si570_1 to 300MHz on ZCU102
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=4716944b35a9cf67cc4bc5706f2f95b0216a6ba1;p=thirdparty%2Fu-boot.git

ARM64: zynqmp: Set factory-fout of si570_1 to 300MHz on ZCU102

Change freq to reflect default setting.

Reported-by: Chris Kohn <ckohn@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
index dca034681d9..917ec174e61 100644
--- a/arch/arm/dts/zynqmp-zcu102.dts
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -375,9 +375,9 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
 				#clock-cells = <0>;
 				compatible = "silabs,si570";
 				reg = <0x5d>;
-				temperature-stability = <50>; /* copy from zc702 */
+				temperature-stability = <50>;
 				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
+				clock-frequency = <300000000>;
 			};
 		};
 		i2c@3 { /* i2c mw 74 0 8 */