From: Andy Shevchenko Date: Fri, 8 May 2026 06:08:35 +0000 (+0200) Subject: iio: magnetometer: yamaha-yas530: replace usleep_range() with fsleep() X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=49d7edc9bd8a2e9a50c918008338273a7c2fc071;p=thirdparty%2Flinux.git iio: magnetometer: yamaha-yas530: replace usleep_range() with fsleep() Replace usleep_range() with fsleep() to allow the kernel to select the most appropriate delay mechanism based on duration. Using USEC_PER_MSEC makes the unit conversion explicit. Signed-off-by: Andy Shevchenko Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c index b3ee4351a0bf1..6bd0535e5eb12 100644 --- a/drivers/iio/magnetometer/yamaha-yas530.c +++ b/drivers/iio/magnetometer/yamaha-yas530.c @@ -1317,7 +1317,7 @@ static int yas537_power_on(struct yas5xx *yas5xx) return ret; /* Wait until the coil has ramped up */ - usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100); + fsleep(YAS537_MAG_RCOIL_TIME_US); return 0; } @@ -1426,7 +1426,7 @@ static int yas5xx_probe(struct i2c_client *i2c) return dev_err_probe(dev, ret, "cannot enable regulators\n"); /* See comment in runtime resume callback */ - usleep_range(31000, 40000); + fsleep(31 * USEC_PER_MSEC); /* This will take the device out of reset if need be */ yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); @@ -1565,7 +1565,7 @@ static int yas5xx_runtime_resume(struct device *dev) * for all voltages to settle. The YAS532 is 10ms then 4ms for the * I2C to come online. Let's keep it safe and put this at 31ms. */ - usleep_range(31000, 40000); + fsleep(31 * USEC_PER_MSEC); gpiod_set_value_cansleep(yas5xx->reset, 0); ret = ci->power_on(yas5xx);