From: Ilpo Järvinen Date: Tue, 3 Feb 2026 17:10:43 +0000 (+0200) Subject: serial: 8250: Protect LCR write in shutdown X-Git-Tag: v7.0-rc5~16^2~7 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=59a33d83bbe6d73d2071d7ae21590b29faed0503;p=thirdparty%2Fkernel%2Flinux.git serial: 8250: Protect LCR write in shutdown The 8250_dw driver needs to potentially perform very complex operations during LCR writes because its BUSY handling prevents updates to LCR while UART is BUSY (which is not fully under our control without those complex operations). Thus, LCR writes should occur under port's lock. Move LCR write under port's lock in serial8250_do_shutdown(). Also split the LCR RMW so that the logic is on a separate line for clarity. Reported-by: Bandal, Shankar Tested-by: Bandal, Shankar Tested-by: Murthy, Shanth Cc: stable Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://patch.msgid.link/20260203171049.4353-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index a743964c9d22..20cf123a0540 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2348,6 +2348,7 @@ static int serial8250_startup(struct uart_port *port) void serial8250_do_shutdown(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); + u32 lcr; serial8250_rpm_get(up); /* @@ -2374,13 +2375,13 @@ void serial8250_do_shutdown(struct uart_port *port) port->mctrl &= ~TIOCM_OUT2; serial8250_set_mctrl(port, port->mctrl); + + /* Disable break condition */ + lcr = serial_port_in(port, UART_LCR); + lcr &= ~UART_LCR_SBC; + serial_port_out(port, UART_LCR, lcr); } - /* - * Disable break condition and FIFOs - */ - serial_port_out(port, UART_LCR, - serial_port_in(port, UART_LCR) & ~UART_LCR_SBC); serial8250_clear_fifos(up); rsa_disable(up);