From: Alexander Stein <alexander.stein@ew.tq-group.com>
Date: Thu, 5 Mar 2026 11:10:36 +0000 (+0100)
Subject: arm64: dts: tqma9352-mba93xx*: Change Ethernet PHY IRQ to IRQ_TYPE_LEVEL_LOW
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=5bc539bb19b7bfc1273018dde63215bf5f2c2810;p=thirdparty%2Fkernel%2Fstable.git

arm64: dts: tqma9352-mba93xx*: Change Ethernet PHY IRQ to IRQ_TYPE_LEVEL_LOW

Ethernet PHY interrupt mode is level triggered. Adjust the mode
accordingly.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 4760d07ea24b..9108181e6592 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -242,7 +242,7 @@
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			enet-phy-lane-no-swap;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
@@ -275,7 +275,7 @@
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 			enet-phy-lane-no-swap;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 8a88c98ac05a..a78bbc46c59b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -172,7 +172,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_eqos_phy>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;
@@ -205,7 +205,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fec_phy>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;