From: Marcin Siodelski <marcin@isc.org>
Date: Tue, 9 Dec 2014 09:38:48 +0000 (+0100)
Subject: [3467] Added example configurations for options.
X-Git-Tag: kea-eng-20141219~12^2
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=5c1d43875b19cfc2b924800106b2173bf03e344b;p=thirdparty%2Fkea.git

[3467] Added example configurations for options.
---

diff --git a/doc/Makefile.am b/doc/Makefile.am
index 27d87ca616..dbaabbb35a 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -4,8 +4,10 @@ EXTRA_DIST = version.ent.in differences.txt Doxyfile Doxyfile-xml
 
 nobase_dist_doc_DATA  = examples/kea4/single-subnet.json
 nobase_dist_doc_DATA += examples/kea4/several-subnets.json
+nobase_dist_doc_DATA += examples/kea4/multiple-options.json
 nobase_dist_doc_DATA += examples/kea6/simple.json
 nobase_dist_doc_DATA += examples/kea6/several-subnets.json
+nobase_dist_doc_DATA += examples/kea6/multiple-options.json
 nobase_dist_doc_DATA += examples/ddns/sample1.json
 nobase_dist_doc_DATA += examples/ddns/template.json
 
diff --git a/doc/examples/kea4/multiple-options.json b/doc/examples/kea4/multiple-options.json
new file mode 100644
index 0000000000..9b125dc1b9
--- /dev/null
+++ b/doc/examples/kea4/multiple-options.json
@@ -0,0 +1,74 @@
+# This is an example configuration file for the DHCPv4 server in Kea.
+# It demonstrates simple configuration of the options for a subnet.
+
+{ "Dhcp4":
+
+{
+# Kea is told to listen on eth0 interface only.
+  "interfaces": [ "eth0" ],
+
+# We need to specify lease type. As of May 2014, three backends are supported:
+# memfile, mysql and pgsql. We'll just use memfile, because it doesn't require
+# any prior set up.
+  "lease-database": {
+    "type": "memfile"
+  },
+
+# Addresses will be assigned with valid lifetimes being 4000. Client
+# is told to start renewing after 1000 seconds. If the server does not respond
+# after 2000 seconds since the lease was granted, client is supposed
+# to start REBIND procedure (emergency renewal that allows switching
+# to a different server).
+  "valid-lifetime": 4000,
+
+# Renew and rebind timers are commented out. This implies that options
+# 58 and 59 will not be sent to the client. In this case it is up to
+# the client to pick the timer values according to RFC2131. Uncomment the
+# timers to send these options to the client.
+#  "renew-timer": 1000,
+#  "rebind-timer": 2000,
+
+# Defining a subnet. There are 3 DHCP options returned to the
+# clients connected to this subnet. The first two options are
+# identified by the name. The third option is identified by the
+# option code.
+  "subnet4": [
+    {
+       "pools": [ { "pool":  "192.0.2.10 - 192.0.2.200" } ],
+       "subnet": "192.0.2.0/24",
+       "interface": "eth0",
+       "option-data": [
+         {
+             "name": "domain-name-servers",
+             "data": "192.0.2.1, 192.0.2.2"
+         },
+         {
+             "name": "routers",
+             "data": "192.0.2.1"
+         },
+         {
+             "code": 15,
+             "data": "example.org"
+         }
+       ]
+    } 
+  ]
+},
+
+# The following configures logging. It assumes that messages with at least
+# informational level (info, warn, error) will will be logged to stdout.
+"Logging": {
+    "loggers": [
+        {
+            "name": "kea-dhcp4",
+            "output_options": [
+                {
+                    "output": "stdout"
+                }
+            ],
+            "severity": "INFO"
+        }
+    ]
+}
+
+}
diff --git a/doc/examples/kea6/multiple-options.json b/doc/examples/kea6/multiple-options.json
new file mode 100644
index 0000000000..682b3b5102
--- /dev/null
+++ b/doc/examples/kea6/multiple-options.json
@@ -0,0 +1,68 @@
+# This is an example configuration file for DHCPv6 server in Kea.
+# It demonstrates simple configuration of the options for a subnet.
+
+{ "Dhcp6":
+
+{
+# Kea is told to listen on eth0 interface only.
+  "interfaces": [ "eth0" ],
+
+# We need to specify lease type. As of May 2014, three backends are supported:
+# memfile, mysql and pgsql. We'll just use memfile, because it doesn't require
+# any prior set up.
+  "lease-database": {
+    "type": "memfile"
+  },
+
+# Addresses will be assigned with preferred and valid lifetimes
+# being 3000 and 4000, respectively. Client is told to start
+# renewing after 1000 seconds. If the server does not repond
+# after 2000 seconds since the lease was granted, client is supposed
+# to start REBIND procedure (emergency renewal that allows switching
+# to a different server).
+  "preferred-lifetime": 3000,
+  "valid-lifetime": 4000,
+  "renew-timer": 1000,
+  "rebind-timer": 2000,
+
+# Defining a subnet. There are 2 DHCP options returned to the
+# clients connected to this subnet. The first option is identified
+# by the name. The second option is identified by the code.
+  "subnet6": [
+    {
+      "pools": [ { "pool": "2001:db8:1::/80" } ],
+      "subnet": "2001:db8:1::/64",
+      "interface": "eth0",
+      "option-data": [
+        {
+            "name": "dns-servers",
+            "data": "2001:db8:2::45, 2001:db8:2::100"
+        },
+        {
+            "code": 12,
+            "data": "2001:db8:1:0:ff00::1"
+        },
+      ]
+    }
+  ]
+},
+
+# The following configures logging. Kea will log all debug messages
+# to /var/log/kea-debug.log file.
+"Logging": {
+    "loggers": [
+        {
+            "name": "kea-dhcp6",
+            "output_options": [
+                {
+                    "output": "/var/log/kea-debug.log"
+                }
+            ],
+            "debuglevel": 99,
+            "severity": "DEBUG"
+        }
+    ]
+}
+
+}
+