From: Niklas Söderlund Date: Thu, 16 Oct 2025 18:20:22 +0000 (+0200) Subject: clocksource/drivers/sh_cmt: Always leave device running after probe X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=62524f285c11d6e6168ad31b586143755b27b2e5;p=thirdparty%2Flinux.git clocksource/drivers/sh_cmt: Always leave device running after probe The CMT device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the CMT is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the CMT registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the CMT driver. However in the context of holding a raw spinlock the CMT driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.17.0-rc3-arm64-renesas-03071-gb3c4f4122b28-dirty #21 Not tainted ----------------------------- swapper/1/0 is trying to lock: ffff00000898d180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 other info that might help us debug this: ccree e6601000.crypto: ARM ccree device initialized context-{5:5} 2 locks held by swapper/1/0: #0: ffff80008173c298 (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 #1: ffff0000089a5858 (&ch->lock){....}-{2:2} usbcore: registered new interface driver usbhid , at: sh_cmt_start+0x30/0x364 stack backtrace: CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.17.0-rc3-arm64-renesas-03071-gb3c4f4122b28-dirty #21 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_cmt_start+0x54/0x364 sh_cmt_clock_event_set_oneshot+0x64/0xb8 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x26c cpu_startup_entry+0x34/0x40 secondary_start_kernel+0x11c/0x13c __secondary_switched+0x74/0x78 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe. Signed-off-by: Niklas Söderlund Signed-off-by: Daniel Lezcano Tested-by: Geert Uytterhoeven Link: https://patch.msgid.link/20251016182022.1837417-1-niklas.soderlund+renesas@ragnatech.se --- diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 385eb94bbe7ce..791b298c995bd 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -355,14 +355,6 @@ static int sh_cmt_enable(struct sh_cmt_channel *ch) dev_pm_syscore_device(&ch->cmt->pdev->dev, true); - /* enable clock */ - ret = clk_enable(ch->cmt->clk); - if (ret) { - dev_err(&ch->cmt->pdev->dev, "ch%u: cannot enable clock\n", - ch->index); - goto err0; - } - /* make sure channel is disabled */ sh_cmt_start_stop_ch(ch, 0); @@ -384,19 +376,12 @@ static int sh_cmt_enable(struct sh_cmt_channel *ch) if (ret || sh_cmt_read_cmcnt(ch)) { dev_err(&ch->cmt->pdev->dev, "ch%u: cannot clear CMCNT\n", ch->index); - ret = -ETIMEDOUT; - goto err1; + return -ETIMEDOUT; } /* enable channel */ sh_cmt_start_stop_ch(ch, 1); return 0; - err1: - /* stop clock */ - clk_disable(ch->cmt->clk); - - err0: - return ret; } static void sh_cmt_disable(struct sh_cmt_channel *ch) @@ -407,9 +392,6 @@ static void sh_cmt_disable(struct sh_cmt_channel *ch) /* disable interrupts in CMT block */ sh_cmt_write_cmcsr(ch, 0); - /* stop clock */ - clk_disable(ch->cmt->clk); - dev_pm_syscore_device(&ch->cmt->pdev->dev, false); } @@ -583,8 +565,6 @@ static int sh_cmt_start_clocksource(struct sh_cmt_channel *ch) int ret = 0; unsigned long flags; - pm_runtime_get_sync(&ch->cmt->pdev->dev); - raw_spin_lock_irqsave(&ch->lock, flags); if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) @@ -619,8 +599,6 @@ static void sh_cmt_stop_clocksource(struct sh_cmt_channel *ch) sh_cmt_disable(ch); raw_spin_unlock_irqrestore(&ch->lock, flags); - - pm_runtime_put(&ch->cmt->pdev->dev); } static int sh_cmt_start_clockevent(struct sh_cmt_channel *ch) @@ -630,10 +608,8 @@ static int sh_cmt_start_clockevent(struct sh_cmt_channel *ch) raw_spin_lock_irqsave(&ch->lock, flags); - if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) { - pm_runtime_get_sync(&ch->cmt->pdev->dev); + if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) ret = sh_cmt_enable(ch); - } if (ret) goto out; @@ -656,10 +632,8 @@ static void sh_cmt_stop_clockevent(struct sh_cmt_channel *ch) ch->flags &= ~FLAG_CLOCKEVENT; - if (f && !(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) { + if (f && !(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) sh_cmt_disable(ch); - pm_runtime_put(&ch->cmt->pdev->dev); - } /* adjust the timeout to maximum if only clocksource left */ if (ch->flags & FLAG_CLOCKSOURCE) @@ -1134,8 +1108,6 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev) mask &= ~(1 << hwidx); } - clk_disable(cmt->clk); - platform_set_drvdata(pdev, cmt); return 0; @@ -1183,8 +1155,6 @@ static int sh_cmt_probe(struct platform_device *pdev) out: if (cmt->has_clockevent || cmt->has_clocksource) pm_runtime_irq_safe(&pdev->dev); - else - pm_runtime_idle(&pdev->dev); return 0; }