From: Rosen Penev <rosenp@gmail.com>
Date: Thu, 19 Mar 2026 03:53:21 +0000 (-0700)
Subject: ARM: dts: BCM5301X: EA9200: add LEDs
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=6b0cb7b34ba68425abb6b3174cca4a7ee031da6d;p=thirdparty%2Fkernel%2Flinux.git

ARM: dts: BCM5301X: EA9200: add LEDs

Allows control and configuration of device LEDs.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260319035324.269905-4-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---

diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
index a579c372d404..617fb55bc52f 100644
--- a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -5,6 +5,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
+
 #include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
@@ -52,6 +54,43 @@
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "rfkill-none";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <3>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
 };
 
 &usb3_phy {