From: Chet Ramey Date: Tue, 30 Dec 2025 20:55:55 +0000 (-0500) Subject: New -D option for fc to force it to delete history entries selected for editing and... X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=722a855459de33ab22749b12333e825b5a5ec539;p=thirdparty%2Fbash.git New -D option for fc to force it to delete history entries selected for editing and re-execution; change readline edit-and-execute-command bindable command so it acts more like an accept-line followed by a command execution than an editing command that returns to readline() --- diff --git a/CWRU/CWRU.chlog b/CWRU/CWRU.chlog index 509288ad..18463f6a 100644 --- a/CWRU/CWRU.chlog +++ b/CWRU/CWRU.chlog @@ -12373,3 +12373,36 @@ lib/readline/bind.c - show-mode-in-prompt: add V_SPECIAL flag so hack_special_boolean_var() gets called and _rl_reset_prompt will be called when it's changed Report and fix from Martin D Kealey + + 12/18 + ----- +bashjmp.h + - REINIT: new value for jump_to_top_level() + +eval.c,shell.c,builtins/evalstring.c + - handle REINIT as a longjmp to top_level value, same as DISCARD + except it doesn't reset last_command_exit_value + +builtins/fc.def + - fc_builtin: new option -D. This removes the selected commands + from the history list before calling fc_execute_file to execute + the edited lines. + Currently used by edit_and_execute_command to remove the partial + history entry so it doesn't trip a HISTCONTROL entry of `ignoredups' + if the partial history entry and the first line of the edited file + happen to be the same. It could be used if you made a typo in a + command and wanted to fix it in an editor without the old line + cluttering up the history + +bashline.c + - edit_and_execute_command: change implementation so it acts more + like an accept-line followed by command execution instead of a + readline command that returns to editing the same line. The old + behavior is present if the shell isn't running interactively or + readline is getting input from a macro. The new behavior is to + not save or restore any parser state, but reset the parser after + parse_and_execute returns and jump_to_top_level (REINIT) + Inspired by a report from William Pursell + +doc/bash.1,doc/bashref.texi + - fc: documented new -D option diff --git a/bashjmp.h b/bashjmp.h index 1a4721bc..065f0708 100644 --- a/bashjmp.h +++ b/bashjmp.h @@ -43,5 +43,6 @@ extern int no_longjmp_on_fatal_error; #define ERREXIT 4 /* Exit due to error condition */ #define SIGEXIT 5 /* Exit due to fatal terminating signal */ #define EXITBLTIN 6 /* Exit due to the exit builtin. */ +#define REINIT 7 /* Abandon current command and reinitialize */ #endif /* _BASHJMP_H_ */ diff --git a/bashline.c b/bashline.c index bd5a2542..0f624604 100644 --- a/bashline.c +++ b/bashline.c @@ -943,17 +943,20 @@ edit_and_execute_command (int count, int c, int editing_mode, const char *edit_c { char *command, *metaval; int r, rrs, metaflag; + int reading_from_tty; + size_t clen; sh_parser_state_t ps; rrs = rl_readline_state; saved_command_line_count = current_command_line_count; + reading_from_tty = interactive && (bash_input.type != st_string) && (RL_ISSTATE (RL_STATE_MACROINPUT) == 0); + /* Accept the current line. */ rl_newline (1, c); if (rl_explicit_arg) { - size_t clen; /* 32 exceeds strlen (itos (INTMAX_MAX)) (19) */ clen = strlen (edit_command) + 32; command = (char *)xmalloc (clen); @@ -965,8 +968,6 @@ edit_and_execute_command (int count, int c, int editing_mode, const char *edit_c then call fc to operate on it. We have to add a dummy command to the end of the history because fc ignores the last command (assumes it's supposed to deal with the command before the `fc'). */ - /* This breaks down when using command-oriented history and are not - finished with the command, so we should not ignore the last command */ using_history (); current_command_line_count++; /* for rl_newline above */ bash_add_history (rl_line_buffer); @@ -974,45 +975,73 @@ edit_and_execute_command (int count, int c, int editing_mode, const char *edit_c bash_add_history (""); history_lines_this_session++; using_history (); - command = savestring (edit_command); + /* XXX - hist_last_line_added = 1; ? */ + /* +4 for -D */ + clen = strlen (edit_command) + 4; + command = (char *)xmalloc (clen); + snprintf (command, clen, "%s -D", edit_command); } - metaval = rl_variable_value ("input-meta"); - metaflag = RL_BOOLEAN_VARIABLE_VALUE (metaval); - - if (rl_deprep_term_function) - (*rl_deprep_term_function) (); - rl_clear_signals (); - save_parser_state (&ps); - parser_unset_string_list (); - r = parse_and_execute (command, (editing_mode == VI_EDITING_MODE) ? "v" : "C-xC-e", SEVAL_NOHIST); - restore_parser_state (&ps); + /* save needed readline state */ + if (reading_from_tty == 0) + { + metaval = rl_variable_value ("input-meta"); + metaflag = RL_BOOLEAN_VARIABLE_VALUE (metaval); + } - /* if some kind of reset_parser was called, undo it. */ - reset_readahead_token (); + rl_cleanup_after_signal (); - if (rl_prep_term_function) - (*rl_prep_term_function) (metaflag); - rl_set_signals (); + /* save needed bash state */ + if (reading_from_tty == 0) + { + save_parser_state (&ps); + parser_unset_string_list (); /* XXX */ + } + + r = parse_and_execute (command, (editing_mode == VI_EDITING_MODE) ? "v" : "C-xC-e", SEVAL_NOHIST); - current_command_line_count = saved_command_line_count; + /* restore needed bash state */ + if (reading_from_tty == 0) + { + restore_parser_state (&ps); - /* Now erase the contents of the current line and undo the effects of the - rl_accept_line() above. We don't even want to make the text we just - executed available for undoing. */ - rl_line_buffer[0] = '\0'; /* XXX */ - rl_point = rl_end = 0; - rl_done = 0; - rl_readline_state = rrs; + /* if some kind of reset_parser was called, undo it. */ + reset_readahead_token (); + current_command_line_count = saved_command_line_count; + } + + /* restore needed readline state */ + if (reading_from_tty == 0) + { + if (rl_prep_term_function) + (*rl_prep_term_function) (metaflag); + rl_set_signals (); + + /* Now erase the contents of the current line and undo the effects of the + rl_accept_line() above. We don't even want to make the text we just + executed available for undoing. */ + rl_line_buffer[0] = '\0'; /* XXX */ + rl_point = rl_end = 0; + rl_done = 0; + rl_readline_state = rrs; #if defined (VI_MODE) - if (editing_mode == VI_EDITING_MODE) - rl_vi_insertion_mode (1, c); + if (editing_mode == VI_EDITING_MODE) + rl_vi_insertion_mode (1, c); #endif - rl_forced_update_display (); + rl_forced_update_display (); + return r; + } - return r; + /* We are running interactively and reading from the keyboard. We need + to jump back to the top level after resetting enough state to read the + next command with readline. We call reset_parser() just in case. */ + reset_parser (); + clear_shell_input_line (); /* XXX - probably not necessary */ + /* The prompt strings will be reset by prompt_again() */ + + jump_to_top_level (REINIT); } #if defined (VI_MODE) diff --git a/builtins/evalstring.c b/builtins/evalstring.c index a408bbde..31ece9ff 100644 --- a/builtins/evalstring.c +++ b/builtins/evalstring.c @@ -421,6 +421,7 @@ parse_and_execute (char *string, const char *from_file, int flags) goto out; case DISCARD: + case REINIT: if (command) run_unwind_frame ("pe_dispose"); last_result = last_command_exit_value = EXECUTION_FAILURE; /* XXX */ @@ -683,6 +684,7 @@ parse_string (char *string, const char *from_file, int flags, COMMAND **cmdp, ch case EXITPROG: case EXITBLTIN: case DISCARD: /* XXX */ + case REINIT: if (command) dispose_command (command); /* Remember to call longjmp (top_level) after the old diff --git a/builtins/fc.def b/builtins/fc.def index 1d88a49a..0187d43b 100644 --- a/builtins/fc.def +++ b/builtins/fc.def @@ -1,7 +1,7 @@ This file is fc.def, from which is created fc.c. It implements the builtin "fc" in Bash. -Copyright (C) 1987-2024 Free Software Foundation, Inc. +Copyright (C) 1987-2025 Free Software Foundation, Inc. This file is part of GNU Bash, the Bourne Again SHell. @@ -23,7 +23,7 @@ $PRODUCES fc.c $BUILTIN fc $FUNCTION fc_builtin $DEPENDS_ON HISTORY -$SHORT_DOC fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command] +$SHORT_DOC fc [-e ename] [-D] [-lnr] [first] [last] or fc -s [pat=rep] [command] Display or execute commands from the history list. fc is used to list or edit and re-execute commands from the history list. @@ -33,8 +33,11 @@ string. Options: -e ENAME select which editor to use. Default is FCEDIT, then EDITOR, - then vi - -l list lines instead of editing + then vi. + -D when editing and re-executing commands, fc removes the selected + commands from the history list before executing the edited + commands + -l list lines instead of editing -n omit line numbers when listing -r reverse the order of the lines (newest listed first) @@ -113,15 +116,16 @@ extern int suppress_debug_trap_verbose; /* fc builtin command (fix command) for Bash for those who like K*rn-style history better than csh-style. - fc [-e ename] [-nlr] [first] [last] + fc [-e ename [-D]] [-nlr] [first] [last] FIRST and LAST can be numbers specifying the range, or FIRST can be a string, which means the most recent command beginning with that string. -e ENAME selects which editor to use. Default is FCEDIT, then EDITOR, - then the editor which corresponds to the current readline editing - mode, then vi. + then vi. + -D means to remove the selected commands from the history before + adding the edited ones. -l means list lines instead of editing. -n means no line numbers listed. @@ -193,7 +197,7 @@ fc_builtin (WORD_LIST *list) { register int i; register char *sep; - int numbering, reverse, listing, execute; + int numbering, reverse, listing, execute, delete_last; int histbeg, histend, last_hist, retval, opt, rh, real_last; FILE *stream; REPL *rlist, *rl; @@ -202,14 +206,14 @@ fc_builtin (WORD_LIST *list) char *fn; numbering = 1; - reverse = listing = execute = 0; + reverse = listing = execute = delete_last = 0; ename = (char *)NULL; /* Parse out the options and set which of the two forms we're in. */ reset_internal_getopt (); lcurrent = list; /* XXX */ while (fc_number (loptend = lcurrent) == 0 && - (opt = internal_getopt (list, ":e:lnrs")) != -1) + (opt = internal_getopt (list, ":e:Dlnrs")) != -1) { switch (opt) { @@ -233,6 +237,10 @@ fc_builtin (WORD_LIST *list) ename = list_optarg; break; + case 'D': + delete_last = 1; + break; + CASE_HELPOPT; default: builtin_usage (); @@ -518,10 +526,20 @@ fc_builtin (WORD_LIST *list) #if defined (READLINE) /* If we're executing as part of a dispatched readline command like - {emacs,vi}_edit_and_execute_command, the readline state will indicate it. - We could remove the partial command from the history, but ksh93 doesn't - so we stay compatible. */ + {emacs,vi}_edit_and_execute_command, the readline state will indicate it. */ #endif + /* If -D is supplied, we remove the selected commands from the history. + If we are being run by edit_and_execute_command, we want to remove the + partial command from the history so a HISTCONTROL value of `ignoredups' + doesn't cause the edited command to be skipped if the first lines are + identical. */ + if (delete_last) + { + if (histbeg == histend) + bash_delete_histent (histbeg); + else + bash_delete_history_range (histbeg, histend); + } /* Make sure parse_and_execute doesn't turn this off, even though a call to parse_and_execute farther up the function call stack (e.g., diff --git a/doc/bash.0 b/doc/bash.0 index 1549badb..259d5bd2 100644 --- a/doc/bash.0 +++ b/doc/bash.0 @@ -5813,7 +5813,7 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS ffaallssee Does nothing; returns a non-zero status. - ffcc [--ee _e_n_a_m_e] [--llnnrr] [_f_i_r_s_t] [_l_a_s_t] + ffcc [--ee _e_n_a_m_e] [--DD] [--llnnrr] [_f_i_r_s_t] [_l_a_s_t] ffcc --ss [_p_a_t=_r_e_p] [_c_m_d] The first form selects a range of commands from _f_i_r_s_t to _l_a_s_t from the history list and displays or edits and re-executes @@ -5839,117 +5839,120 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS value of the FFCCEEDDIITT variable, and the value of EEDDIITTOORR if FFCCEEDDIITT is not set. If neither variable is set, ffcc uses _v_i_. When edit- ing is complete, ffcc reads the file containing the edited com- - mands and echoes and executes them. + mands and echoes and executes them. The --DD option, if supplied, + causes ffcc to remove the selected commands from the history list + before executing the file of edited commands. --DD is only active + when ffcc is invoked in this way. - In the second form, ffcc re-executes _c_o_m_m_a_n_d after replacing each - instance of _p_a_t with _r_e_p. _C_o_m_m_a_n_d is interpreted the same as + In the second form, ffcc re-executes _c_o_m_m_a_n_d after replacing each + instance of _p_a_t with _r_e_p. _C_o_m_m_a_n_d is interpreted the same as _f_i_r_s_t above. - A useful alias to use with ffcc is "r="fc -s"", so that typing "r + A useful alias to use with ffcc is "r="fc -s"", so that typing "r cc" runs the last command beginning with "cc" and typing "r" re- executes the last command. - If the first form is used, the return value is zero unless an - invalid option is encountered or _f_i_r_s_t or _l_a_s_t specify history - lines out of range. When editing and re-executing a file of + If the first form is used, the return value is zero unless an + invalid option is encountered or _f_i_r_s_t or _l_a_s_t specify history + lines out of range. When editing and re-executing a file of commands, the return value is the value of the last command exe- cuted or failure if an error occurs with the temporary file. If the second form is used, the return status is that of the re-ex- - ecuted command, unless _c_m_d does not specify a valid history en- + ecuted command, unless _c_m_d does not specify a valid history en- try, in which case ffcc returns a non-zero status. ffgg [_j_o_b_s_p_e_c] - Resume _j_o_b_s_p_e_c in the foreground, and make it the current job. - If _j_o_b_s_p_e_c is not present, ffgg uses the shell's notion of the - _c_u_r_r_e_n_t _j_o_b. The return value is that of the command placed - into the foreground, or failure if run when job control is dis- + Resume _j_o_b_s_p_e_c in the foreground, and make it the current job. + If _j_o_b_s_p_e_c is not present, ffgg uses the shell's notion of the + _c_u_r_r_e_n_t _j_o_b. The return value is that of the command placed + into the foreground, or failure if run when job control is dis- abled or, when run with job control enabled, if _j_o_b_s_p_e_c does not - specify a valid job or _j_o_b_s_p_e_c specifies a job that was started + specify a valid job or _j_o_b_s_p_e_c specifies a job that was started without job control. ggeettooppttss _o_p_t_s_t_r_i_n_g _n_a_m_e [_a_r_g ...] - ggeettooppttss is used by shell scripts and functions to parse posi- - tional parameters and obtain options and their arguments. _o_p_t_- - _s_t_r_i_n_g contains the option characters to be recognized; if a + ggeettooppttss is used by shell scripts and functions to parse posi- + tional parameters and obtain options and their arguments. _o_p_t_- + _s_t_r_i_n_g contains the option characters to be recognized; if a character is followed by a colon, the option is expected to have - an argument, which should be separated from it by white space. + an argument, which should be separated from it by white space. The colon and question mark characters may not be used as option characters. - Each time it is invoked, ggeettooppttss places the next option in the + Each time it is invoked, ggeettooppttss places the next option in the shell variable _n_a_m_e, initializing _n_a_m_e if it does not exist, and the index of the next argument to be processed into the variable - OOPPTTIINNDD. OOPPTTIINNDD is initialized to 1 each time the shell or a - shell script is invoked. When an option requires an argument, + OOPPTTIINNDD. OOPPTTIINNDD is initialized to 1 each time the shell or a + shell script is invoked. When an option requires an argument, ggeettooppttss places that argument into the variable OOPPTTAARRGG. - The shell does not reset OOPPTTIINNDD automatically; it must be manu- - ally reset between multiple calls to ggeettooppttss within the same + The shell does not reset OOPPTTIINNDD automatically; it must be manu- + ally reset between multiple calls to ggeettooppttss within the same shell invocation to use a new set of parameters. - When it reaches the end of options, ggeettooppttss exits with a return - value greater than zero. OOPPTTIINNDD is set to the index of the + When it reaches the end of options, ggeettooppttss exits with a return + value greater than zero. OOPPTTIINNDD is set to the index of the first non-option argument, and _n_a_m_e is set to ?. - ggeettooppttss normally parses the positional parameters, but if more - arguments are supplied as _a_r_g values, ggeettooppttss parses those in- + ggeettooppttss normally parses the positional parameters, but if more + arguments are supplied as _a_r_g values, ggeettooppttss parses those in- stead. - ggeettooppttss can report errors in two ways. If the first character - of _o_p_t_s_t_r_i_n_g is a colon, ggeettooppttss uses _s_i_l_e_n_t error reporting. - In normal operation, ggeettooppttss prints diagnostic messages when it - encounters invalid options or missing option arguments. If the - variable OOPPTTEERRRR is set to 0, ggeettooppttss does not display any error - messages, even if the first character of _o_p_t_s_t_r_i_n_g is not a + ggeettooppttss can report errors in two ways. If the first character + of _o_p_t_s_t_r_i_n_g is a colon, ggeettooppttss uses _s_i_l_e_n_t error reporting. + In normal operation, ggeettooppttss prints diagnostic messages when it + encounters invalid options or missing option arguments. If the + variable OOPPTTEERRRR is set to 0, ggeettooppttss does not display any error + messages, even if the first character of _o_p_t_s_t_r_i_n_g is not a colon. If ggeettooppttss detects an invalid option, it places ? into _n_a_m_e and, - if not silent, prints an error message and unsets OOPPTTAARRGG. If - ggeettooppttss is silent, it assigns the option character found to OOPP-- + if not silent, prints an error message and unsets OOPPTTAARRGG. If + ggeettooppttss is silent, it assigns the option character found to OOPP-- TTAARRGG and does not print a diagnostic message. - If a required argument is not found, and ggeettooppttss is not silent, + If a required argument is not found, and ggeettooppttss is not silent, it sets the value of _n_a_m_e to a question mark (??), unsets OOPPTTAARRGG, - and prints a diagnostic message. If ggeettooppttss is silent, it sets - the value of _n_a_m_e to a colon (::) and sets OOPPTTAARRGG to the option + and prints a diagnostic message. If ggeettooppttss is silent, it sets + the value of _n_a_m_e to a colon (::) and sets OOPPTTAARRGG to the option character found. - ggeettooppttss returns true if an option, specified or unspecified, is + ggeettooppttss returns true if an option, specified or unspecified, is found. It returns false if the end of options is encountered or an error occurs. hhaasshh [--llrr] [--pp _f_i_l_e_n_a_m_e] [--ddtt] [_n_a_m_e] Each time hhaasshh is invoked, it remembers the full pathname of the - command _n_a_m_e as determined by searching the directories in - $$PPAATTHH. Any previously-remembered pathname associated with _n_a_m_e - is discarded. If the --pp option is supplied, hhaasshh uses _f_i_l_e_n_a_m_e + command _n_a_m_e as determined by searching the directories in + $$PPAATTHH. Any previously-remembered pathname associated with _n_a_m_e + is discarded. If the --pp option is supplied, hhaasshh uses _f_i_l_e_n_a_m_e as the full pathname of the command. - The --rr option causes the shell to forget all remembered loca- - tions. Assigning to the PPAATTHH variable also clears all hashed - filenames. The --dd option causes the shell to forget the remem- + The --rr option causes the shell to forget all remembered loca- + tions. Assigning to the PPAATTHH variable also clears all hashed + filenames. The --dd option causes the shell to forget the remem- bered location of each _n_a_m_e. If the --tt option is supplied, hhaasshh prints the full pathname cor- - responding to each _n_a_m_e. If multiple _n_a_m_e arguments are sup- - plied with --tt, hhaasshh prints the _n_a_m_e before the corresponding + responding to each _n_a_m_e. If multiple _n_a_m_e arguments are sup- + plied with --tt, hhaasshh prints the _n_a_m_e before the corresponding hashed full pathname. The --ll option displays output in a format that may be reused as input. - If no arguments are given, or if only --ll is supplied, hhaasshh - prints information about remembered commands. The --tt, --dd, and - --pp options (the options that act on the _n_a_m_e arguments) are mu- + If no arguments are given, or if only --ll is supplied, hhaasshh + prints information about remembered commands. The --tt, --dd, and + --pp options (the options that act on the _n_a_m_e arguments) are mu- tually exclusive. Only one will be active. If more than one is - supplied, --tt has higher priority than --pp, and both have higher + supplied, --tt has higher priority than --pp, and both have higher priority than --dd. - The return status is zero unless a _n_a_m_e is not found or an in- + The return status is zero unless a _n_a_m_e is not found or an in- valid option is supplied. hheellpp [--ddmmss] [_p_a_t_t_e_r_n] - Display helpful information about builtin commands. If _p_a_t_t_e_r_n - is specified, hheellpp gives detailed help on all commands matching - _p_a_t_t_e_r_n as described below; otherwise it displays a list of all + Display helpful information about builtin commands. If _p_a_t_t_e_r_n + is specified, hheellpp gives detailed help on all commands matching + _p_a_t_t_e_r_n as described below; otherwise it displays a list of all the builtins and shell compound commands. Options, if supplied, have the follow meanings: @@ -5959,13 +5962,13 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS format --ss Display only a short usage synopsis for each _p_a_t_t_e_r_n - If _p_a_t_t_e_r_n contains pattern matching characters (see PPaatttteerrnn - MMaattcchhiinngg above) it's treated as a shell pattern and hheellpp prints + If _p_a_t_t_e_r_n contains pattern matching characters (see PPaatttteerrnn + MMaattcchhiinngg above) it's treated as a shell pattern and hheellpp prints the description of each help topic matching _p_a_t_t_e_r_n. - If not, and _p_a_t_t_e_r_n exactly matches the name of a help topic, - hheellpp prints the description associated with that topic. Other- - wise, hheellpp performs prefix matching and prints the descriptions + If not, and _p_a_t_t_e_r_n exactly matches the name of a help topic, + hheellpp prints the description associated with that topic. Other- + wise, hheellpp performs prefix matching and prints the descriptions of all matching help topics. The return status is 0 unless no command matches _p_a_t_t_e_r_n. @@ -5977,18 +5980,18 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS hhiissttoorryy --aannrrww [_f_i_l_e_n_a_m_e] hhiissttoorryy --pp _a_r_g [_a_r_g ...] hhiissttoorryy --ss _a_r_g [_a_r_g ...] - With no options, display the command history list with numbers. - Entries prefixed with a ** have been modified. An argument of _n - lists only the last _n entries. If the shell variable HHIISSTTTTIIMMEE-- - FFOORRMMAATT is set and not null, it is used as a format string for - _s_t_r_f_t_i_m_e(3) to display the time stamp associated with each dis- - played history entry. If hhiissttoorryy uses HHIISSTTTTIIMMEEFFOORRMMAATT, it does - not print an intervening space between the formatted time stamp + With no options, display the command history list with numbers. + Entries prefixed with a ** have been modified. An argument of _n + lists only the last _n entries. If the shell variable HHIISSTTTTIIMMEE-- + FFOORRMMAATT is set and not null, it is used as a format string for + _s_t_r_f_t_i_m_e(3) to display the time stamp associated with each dis- + played history entry. If hhiissttoorryy uses HHIISSTTTTIIMMEEFFOORRMMAATT, it does + not print an intervening space between the formatted time stamp and the history entry. If _f_i_l_e_n_a_m_e is supplied, hhiissttoorryy uses it as the name of the his- - tory file; if not, it uses the value of HHIISSTTFFIILLEE. If _f_i_l_e_n_a_m_e - is not supplied and HHIISSTTFFIILLEE is unset or null, the --aa,, --nn,, --rr,, + tory file; if not, it uses the value of HHIISSTTFFIILLEE. If _f_i_l_e_n_a_m_e + is not supplied and HHIISSTTFFIILLEE is unset or null, the --aa,, --nn,, --rr,, and --ww options have no effect. Options, if supplied, have the following meanings: @@ -5996,20 +5999,20 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS can be used with the other options to replace the history list. --dd _o_f_f_s_e_t - Delete the history entry at position _o_f_f_s_e_t. If _o_f_f_s_e_t + Delete the history entry at position _o_f_f_s_e_t. If _o_f_f_s_e_t is negative, it is interpreted as relative to one greater than the last history position, so negative indices count - back from the end of the history, and an index of -1 + back from the end of the history, and an index of -1 refers to the current hhiissttoorryy --dd command. --dd _s_t_a_r_t-_e_n_d - Delete the range of history entries between positions - _s_t_a_r_t and _e_n_d, inclusive. Positive and negative values + Delete the range of history entries between positions + _s_t_a_r_t and _e_n_d, inclusive. Positive and negative values for _s_t_a_r_t and _e_n_d are interpreted as described above. - --aa Append the "new" history lines to the history file. - These are history lines entered since the beginning of + --aa Append the "new" history lines to the history file. + These are history lines entered since the beginning of the current bbaasshh session, but not already appended to the history file. - --nn Read the history lines not already read from the history + --nn Read the history lines not already read from the history file and add them to the current history list. These are lines appended to the history file since the beginning of the current bbaasshh session. @@ -6017,24 +6020,24 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS rent history list. --ww Write the current history list to the history file, over- writing the history file. - --pp Perform history substitution on the following _a_r_g_s and - display the result on the standard output, without stor- - ing the results in the history list. Each _a_r_g must be + --pp Perform history substitution on the following _a_r_g_s and + display the result on the standard output, without stor- + ing the results in the history list. Each _a_r_g must be quoted to disable normal history expansion. - --ss Store the _a_r_g_s in the history list as a single entry. - The last command in the history list is removed before + --ss Store the _a_r_g_s in the history list as a single entry. + The last command in the history list is removed before adding the _a_r_g_s. - If the HHIISSTTTTIIMMEEFFOORRMMAATT variable is set, hhiissttoorryy writes the time + If the HHIISSTTTTIIMMEEFFOORRMMAATT variable is set, hhiissttoorryy writes the time stamp information associated with each history entry to the his- - tory file, marked with the history comment character as de- - scribed above. When the history file is read, lines beginning - with the history comment character followed immediately by a - digit are interpreted as timestamps for the following history + tory file, marked with the history comment character as de- + scribed above. When the history file is read, lines beginning + with the history comment character followed immediately by a + digit are interpreted as timestamps for the following history entry. - The return value is 0 unless an invalid option is encountered, - an error occurs while reading or writing the history file, an + The return value is 0 unless an invalid option is encountered, + an error occurs while reading or writing the history file, an invalid _o_f_f_s_e_t or range is supplied as an argument to --dd, or the history expansion supplied as an argument to --pp fails. @@ -6043,14 +6046,14 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS The first form lists the active jobs. The options have the fol- lowing meanings: --ll List process IDs in addition to the normal information. - --nn Display information only about jobs that have changed + --nn Display information only about jobs that have changed status since the user was last notified of their status. - --pp List only the process ID of the job's process group + --pp List only the process ID of the job's process group leader. --rr Display only running jobs. --ss Display only stopped jobs. - If _j_o_b_s_p_e_c is supplied, jjoobbss restricts output to information + If _j_o_b_s_p_e_c is supplied, jjoobbss restricts output to information about that job. The return status is 0 unless an invalid option is encountered or an invalid _j_o_b_s_p_e_c is supplied. @@ -6060,448 +6063,448 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS kkiillll [--ss _s_i_g_s_p_e_c | --nn _s_i_g_n_u_m | --_s_i_g_s_p_e_c] _i_d [ ... ] kkiillll --ll|--LL [_s_i_g_s_p_e_c | _e_x_i_t___s_t_a_t_u_s] - Send the signal specified by _s_i_g_s_p_e_c or _s_i_g_n_u_m to the processes + Send the signal specified by _s_i_g_s_p_e_c or _s_i_g_n_u_m to the processes named by each _i_d. Each _i_d may be a job specification _j_o_b_s_p_e_c or - a process ID _p_i_d. _s_i_g_s_p_e_c is either a case-insensitive signal - name such as SSIIGGKKIILLLL (with or without the SSIIGG prefix) or a sig- - nal number; _s_i_g_n_u_m is a signal number. If _s_i_g_s_p_e_c is not sup- + a process ID _p_i_d. _s_i_g_s_p_e_c is either a case-insensitive signal + name such as SSIIGGKKIILLLL (with or without the SSIIGG prefix) or a sig- + nal number; _s_i_g_n_u_m is a signal number. If _s_i_g_s_p_e_c is not sup- plied, then kkiillll sends SSIIGGTTEERRMM. The --ll option lists the signal names. If any arguments are sup- plied when --ll is given, kkiillll lists the names of the signals cor- - responding to the arguments, and the return status is 0. The - _e_x_i_t___s_t_a_t_u_s argument to --ll is a number specifying either a sig- - nal number or the exit status of a process terminated by a sig- - nal; if it is supplied, kkiillll prints the name of the signal that + responding to the arguments, and the return status is 0. The + _e_x_i_t___s_t_a_t_u_s argument to --ll is a number specifying either a sig- + nal number or the exit status of a process terminated by a sig- + nal; if it is supplied, kkiillll prints the name of the signal that caused the process to terminate. kkiillll assumes that process exit statuses are greater than 128; anything less than that is a sig- nal number. The --LL option is equivalent to --ll. - kkiillll returns true if at least one signal was successfully sent, + kkiillll returns true if at least one signal was successfully sent, or false if an error occurs or an invalid option is encountered. lleett _a_r_g [_a_r_g ...] - Each _a_r_g is evaluated as an arithmetic expression (see AARRIITTHH-- - MMEETTIICC EEVVAALLUUAATTIIOONN above). If the last _a_r_g evaluates to 0, lleett + Each _a_r_g is evaluated as an arithmetic expression (see AARRIITTHH-- + MMEETTIICC EEVVAALLUUAATTIIOONN above). If the last _a_r_g evaluates to 0, lleett returns 1; otherwise lleett returns 0. llooccaall [_o_p_t_i_o_n] [_n_a_m_e[=_v_a_l_u_e] ... | - ] For each argument, create a local variable named _n_a_m_e and assign - it _v_a_l_u_e. The _o_p_t_i_o_n can be any of the options accepted by ddee-- - ccllaarree. When llooccaall is used within a function, it causes the - variable _n_a_m_e to have a visible scope restricted to that func- - tion and its children. It is an error to use llooccaall when not + it _v_a_l_u_e. The _o_p_t_i_o_n can be any of the options accepted by ddee-- + ccllaarree. When llooccaall is used within a function, it causes the + variable _n_a_m_e to have a visible scope restricted to that func- + tion and its children. It is an error to use llooccaall when not within a function. - If _n_a_m_e is -, it makes the set of shell options local to the - function in which llooccaall is invoked: any shell options changed - using the sseett builtin inside the function after the call to lloo-- - ccaall are restored to their original values when the function re- - turns. The restore is performed as if a series of sseett commands - were executed to restore the values that were in place before + If _n_a_m_e is -, it makes the set of shell options local to the + function in which llooccaall is invoked: any shell options changed + using the sseett builtin inside the function after the call to lloo-- + ccaall are restored to their original values when the function re- + turns. The restore is performed as if a series of sseett commands + were executed to restore the values that were in place before the function. - With no operands, llooccaall writes a list of local variables to the + With no operands, llooccaall writes a list of local variables to the standard output. - The return status is 0 unless llooccaall is used outside a function, + The return status is 0 unless llooccaall is used outside a function, an invalid _n_a_m_e is supplied, or _n_a_m_e is a readonly variable. llooggoouutt [[_n]] - Exit a login shell, returning a status of _n to the shell's par- + Exit a login shell, returning a status of _n to the shell's par- ent. mmaappffiillee [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y] rreeaaddaarrrraayy [--dd _d_e_l_i_m] [--nn _c_o_u_n_t] [--OO _o_r_i_g_i_n] [--ss _c_o_u_n_t] [--tt] [--uu _f_d] [--CC _c_a_l_l_b_a_c_k] [--cc _q_u_a_n_t_u_m] [_a_r_r_a_y] - Read lines from the standard input, or from file descriptor _f_d - if the --uu option is supplied, into the indexed array variable - _a_r_r_a_y. The variable MMAAPPFFIILLEE is the default _a_r_r_a_y. Options, if + Read lines from the standard input, or from file descriptor _f_d + if the --uu option is supplied, into the indexed array variable + _a_r_r_a_y. The variable MMAAPPFFIILLEE is the default _a_r_r_a_y. Options, if supplied, have the following meanings: - --dd Use the first character of _d_e_l_i_m to terminate each input + --dd Use the first character of _d_e_l_i_m to terminate each input line, rather than newline. If _d_e_l_i_m is the empty string, mmaappffiillee will terminate a line when it reads a NUL charac- ter. --nn Copy at most _c_o_u_n_t lines. If _c_o_u_n_t is 0, copy all lines. - --OO Begin assigning to _a_r_r_a_y at index _o_r_i_g_i_n. The default + --OO Begin assigning to _a_r_r_a_y at index _o_r_i_g_i_n. The default index is 0. --ss Discard the first _c_o_u_n_t lines read. - --tt Remove a trailing _d_e_l_i_m (default newline) from each line + --tt Remove a trailing _d_e_l_i_m (default newline) from each line read. - --uu Read lines from file descriptor _f_d instead of the stan- + --uu Read lines from file descriptor _f_d instead of the stan- dard input. - --CC Evaluate _c_a_l_l_b_a_c_k each time _q_u_a_n_t_u_m lines are read. The + --CC Evaluate _c_a_l_l_b_a_c_k each time _q_u_a_n_t_u_m lines are read. The --cc option specifies _q_u_a_n_t_u_m. - --cc Specify the number of lines read between each call to + --cc Specify the number of lines read between each call to _c_a_l_l_b_a_c_k. - If --CC is specified without --cc, the default quantum is 5000. + If --CC is specified without --cc, the default quantum is 5000. When _c_a_l_l_b_a_c_k is evaluated, it is supplied the index of the next array element to be assigned and the line to be assigned to that - element as additional arguments. _c_a_l_l_b_a_c_k is evaluated after + element as additional arguments. _c_a_l_l_b_a_c_k is evaluated after the line is read but before the array element is assigned. - If not supplied with an explicit origin, mmaappffiillee will clear _a_r_- + If not supplied with an explicit origin, mmaappffiillee will clear _a_r_- _r_a_y before assigning to it. mmaappffiillee returns zero unless an invalid option or option argument - is supplied, _a_r_r_a_y is invalid or unassignable, or if _a_r_r_a_y is + is supplied, _a_r_r_a_y is invalid or unassignable, or if _a_r_r_a_y is not an indexed array. ppooppdd [-nn] [+_n] [-_n] - Remove entries from the directory stack. The elements are num- - bered from 0 starting at the first directory listed by ddiirrss, so - ppooppdd is equivalent to "popd +0." With no arguments, ppooppdd re- - moves the top directory from the stack, and changes to the new + Remove entries from the directory stack. The elements are num- + bered from 0 starting at the first directory listed by ddiirrss, so + ppooppdd is equivalent to "popd +0." With no arguments, ppooppdd re- + moves the top directory from the stack, and changes to the new top directory. Arguments, if supplied, have the following mean- ings: --nn Suppress the normal change of directory when removing di- rectories from the stack, only manipulate the stack. - ++_n Remove the _nth entry counting from the left of the list - shown by ddiirrss, starting with zero, from the stack. For + ++_n Remove the _nth entry counting from the left of the list + shown by ddiirrss, starting with zero, from the stack. For example: "popd +0" removes the first directory, "popd +1" the second. - --_n Remove the _nth entry counting from the right of the list - shown by ddiirrss, starting with zero. For example: "popd - -0" removes the last directory, "popd -1" the next to + --_n Remove the _nth entry counting from the right of the list + shown by ddiirrss, starting with zero. For example: "popd + -0" removes the last directory, "popd -1" the next to last. - If the top element of the directory stack is modified, and the - --nn option was not supplied, ppooppdd uses the ccdd builtin to change + If the top element of the directory stack is modified, and the + --nn option was not supplied, ppooppdd uses the ccdd builtin to change to the directory at the top of the stack. If the ccdd fails, ppooppdd returns a non-zero value. - Otherwise, ppooppdd returns false if an invalid option is supplied, - the directory stack is empty, or _n specifies a non-existent di- + Otherwise, ppooppdd returns false if an invalid option is supplied, + the directory stack is empty, or _n specifies a non-existent di- rectory stack entry. - If the ppooppdd command is successful, bbaasshh runs ddiirrss to show the - final contents of the directory stack, and the return status is + If the ppooppdd command is successful, bbaasshh runs ddiirrss to show the + final contents of the directory stack, and the return status is 0. pprriinnttff [--vv _v_a_r] _f_o_r_m_a_t [_a_r_g_u_m_e_n_t_s] - Write the formatted _a_r_g_u_m_e_n_t_s to the standard output under the - control of the _f_o_r_m_a_t. The --vv option assigns the output to the + Write the formatted _a_r_g_u_m_e_n_t_s to the standard output under the + control of the _f_o_r_m_a_t. The --vv option assigns the output to the variable _v_a_r rather than printing it to the standard output. - The _f_o_r_m_a_t is a character string which contains three types of - objects: plain characters, which are simply copied to standard - output, character escape sequences, which are converted and - copied to the standard output, and format specifications, each - of which causes printing of the next successive _a_r_g_u_m_e_n_t. In - addition to the standard _p_r_i_n_t_f(3) format characters ccCCssSS-- + The _f_o_r_m_a_t is a character string which contains three types of + objects: plain characters, which are simply copied to standard + output, character escape sequences, which are converted and + copied to the standard output, and format specifications, each + of which causes printing of the next successive _a_r_g_u_m_e_n_t. In + addition to the standard _p_r_i_n_t_f(3) format characters ccCCssSS-- nnddiioouuxxXXeeEEffFFggGGaaAA, pprriinnttff interprets the following additional for- mat specifiers: %%bb causes pprriinnttff to expand backslash escape sequences in the corresponding _a_r_g_u_m_e_n_t in the same way as eecchhoo --ee. - %%qq causes pprriinnttff to output the corresponding _a_r_g_u_m_e_n_t in a - format that can be reused as shell input. %%qq and %%QQ use - the $$'''' quoting style if any characters in the argument - string require it, and backslash quoting otherwise. If - the format string uses the _p_r_i_n_t_f alternate form, these + %%qq causes pprriinnttff to output the corresponding _a_r_g_u_m_e_n_t in a + format that can be reused as shell input. %%qq and %%QQ use + the $$'''' quoting style if any characters in the argument + string require it, and backslash quoting otherwise. If + the format string uses the _p_r_i_n_t_f alternate form, these two formats quote the argument string using single quotes. - %%QQ like %%qq, but applies any supplied precision to the _a_r_g_u_- + %%QQ like %%qq, but applies any supplied precision to the _a_r_g_u_- _m_e_n_t before quoting it. %%((_d_a_t_e_f_m_t))TT - causes pprriinnttff to output the date-time string resulting - from using _d_a_t_e_f_m_t as a format string for _s_t_r_f_t_i_m_e(3). + causes pprriinnttff to output the date-time string resulting + from using _d_a_t_e_f_m_t as a format string for _s_t_r_f_t_i_m_e(3). The corresponding _a_r_g_u_m_e_n_t is an integer representing the number of seconds since the epoch. This format specifier recognizes two special argument values: -1 represents the - current time, and -2 represents the time the shell was + current time, and -2 represents the time the shell was invoked. If no argument is specified, conversion behaves - as if -1 had been supplied. This is an exception to the + as if -1 had been supplied. This is an exception to the usual pprriinnttff behavior. The %b, %q, and %T format specifiers all use the field width and precision arguments from the format specification and write that - many bytes from (or use that wide a field for) the expanded ar- - gument, which usually contains more characters than the origi- + many bytes from (or use that wide a field for) the expanded ar- + gument, which usually contains more characters than the origi- nal. The %n format specifier accepts a corresponding argument that is treated as a shell variable name. - The %s and %c format specifiers accept an l (long) modifier, + The %s and %c format specifiers accept an l (long) modifier, which forces them to convert the argument string to a wide-char- acter string and apply any supplied field width and precision in terms of characters, not bytes. The %S and %C format specifiers are equivalent to %ls and %lc, respectively. - Arguments to non-string format specifiers are treated as C con- + Arguments to non-string format specifiers are treated as C con- stants, except that a leading plus or minus sign is allowed, and - if the leading character is a single or double quote, the value - is the numeric value of the following character, using the cur- + if the leading character is a single or double quote, the value + is the numeric value of the following character, using the cur- rent locale. - Format specifiers may apply to the _nth argument rather than the - next sequential argument. In this case, the '%' in the format - specifier is replaced by the sequence "%_n$", where _n is a deci- + Format specifiers may apply to the _nth argument rather than the + next sequential argument. In this case, the '%' in the format + specifier is replaced by the sequence "%_n$", where _n is a deci- mal integer greater than 0, giving the argument number to use as - the operand. The format string should not mix numbered and un- - numbered argument specifiers, though this is allowed. Unnum- + the operand. The format string should not mix numbered and un- + numbered argument specifiers, though this is allowed. Unnum- bered argument specifiers always refer to the next argument fol- - lowing the last argument consumed by an unnumbered specifier; - numbered argument specifiers refer to absolute positions in the + lowing the last argument consumed by an unnumbered specifier; + numbered argument specifiers refer to absolute positions in the argument list. - The _f_o_r_m_a_t is reused as necessary to consume all of the _a_r_g_u_- + The _f_o_r_m_a_t is reused as necessary to consume all of the _a_r_g_u_- _m_e_n_t_s. If the _f_o_r_m_a_t requires more _a_r_g_u_m_e_n_t_s than are supplied, - the extra format specifications behave as if a zero value or - null string, as appropriate, had been supplied. If _f_o_r_m_a_t is - reused, a numbered argument specifier "%_n$" refers to the _nth + the extra format specifications behave as if a zero value or + null string, as appropriate, had been supplied. If _f_o_r_m_a_t is + reused, a numbered argument specifier "%_n$" refers to the _nth argument following the highest numbered argument consumed by the previous use of _f_o_r_m_a_t. - The return value is zero on success, non-zero if an invalid op- + The return value is zero on success, non-zero if an invalid op- tion is supplied or a write or assignment error occurs. ppuusshhdd [--nn] [+_n] [-_n] ppuusshhdd [--nn] [_d_i_r] Add a directory to the top of the directory stack, or rotate the - stack, making the new top of the stack the current working di- - rectory. With no arguments, ppuusshhdd exchanges the top two ele- - ments of the directory stack. Arguments, if supplied, have the + stack, making the new top of the stack the current working di- + rectory. With no arguments, ppuusshhdd exchanges the top two ele- + ments of the directory stack. Arguments, if supplied, have the following meanings: - --nn Suppress the normal change of directory when rotating or - adding directories to the stack, only manipulate the + --nn Suppress the normal change of directory when rotating or + adding directories to the stack, only manipulate the stack. ++_n Rotate the stack so that the _nth directory (counting from - the left of the list shown by ddiirrss, starting with zero) + the left of the list shown by ddiirrss, starting with zero) is at the top. - --_n Rotates the stack so that the _nth directory (counting - from the right of the list shown by ddiirrss, starting with + --_n Rotates the stack so that the _nth directory (counting + from the right of the list shown by ddiirrss, starting with zero) is at the top. _d_i_r Adds _d_i_r to the directory stack at the top. After the stack has been modified, if the --nn option was not sup- - plied, ppuusshhdd uses the ccdd builtin to change to the directory at + plied, ppuusshhdd uses the ccdd builtin to change to the directory at the top of the stack. If the ccdd fails, ppuusshhdd returns a non-zero value. - Otherwise, if no arguments are supplied, ppuusshhdd returns zero un- - less the directory stack is empty. When rotating the directory + Otherwise, if no arguments are supplied, ppuusshhdd returns zero un- + less the directory stack is empty. When rotating the directory stack, ppuusshhdd returns zero unless the directory stack is empty or _n specifies a non-existent directory stack element. - If the ppuusshhdd command is successful, bbaasshh runs ddiirrss to show the + If the ppuusshhdd command is successful, bbaasshh runs ddiirrss to show the final contents of the directory stack. ppwwdd [--LLPP] - Print the absolute pathname of the current working directory. + Print the absolute pathname of the current working directory. The pathname printed contains no symbolic links if the --PP option is supplied or the --oo pphhyyssiiccaall option to the sseett builtin command - is enabled. If the --LL option is used, the pathname printed may - contain symbolic links. The return status is 0 unless an error + is enabled. If the --LL option is used, the pathname printed may + contain symbolic links. The return status is 0 unless an error occurs while reading the name of the current directory or an in- valid option is supplied. rreeaadd [--EEeerrss] [--aa _a_n_a_m_e] [--dd _d_e_l_i_m] [--ii _t_e_x_t] [--nn _n_c_h_a_r_s] [--NN _n_c_h_a_r_s] [--pp _p_r_o_m_p_t] [--tt _t_i_m_e_o_u_t] [--uu _f_d] [_n_a_m_e ...] Read one line from the standard input, or from the file descrip- - tor _f_d supplied as an argument to the --uu option, split it into - words as described above under WWoorrdd SSpplliittttiinngg, and assign the - first word to the first _n_a_m_e, the second word to the second - _n_a_m_e, and so on. If there are more words than names, the re- - maining words and their intervening delimiters are assigned to - the last _n_a_m_e. If there are fewer words read from the input - stream than names, the remaining names are assigned empty val- - ues. The characters in the value of the IIFFSS variable are used + tor _f_d supplied as an argument to the --uu option, split it into + words as described above under WWoorrdd SSpplliittttiinngg, and assign the + first word to the first _n_a_m_e, the second word to the second + _n_a_m_e, and so on. If there are more words than names, the re- + maining words and their intervening delimiters are assigned to + the last _n_a_m_e. If there are fewer words read from the input + stream than names, the remaining names are assigned empty val- + ues. The characters in the value of the IIFFSS variable are used to split the line into words using the same rules the shell uses for expansion (described above under WWoorrdd SSpplliittttiinngg). The back- - slash character (\\) removes any special meaning for the next + slash character (\\) removes any special meaning for the next character read and is used for line continuation. Options, if supplied, have the following meanings: --aa _a_n_a_m_e The words are assigned to sequential indices of the array variable _a_n_a_m_e, starting at 0. _a_n_a_m_e is unset before any - new values are assigned. Other _n_a_m_e arguments are ig- + new values are assigned. Other _n_a_m_e arguments are ig- nored. --dd _d_e_l_i_m - The first character of _d_e_l_i_m terminates the input line, - rather than newline. If _d_e_l_i_m is the empty string, rreeaadd + The first character of _d_e_l_i_m terminates the input line, + rather than newline. If _d_e_l_i_m is the empty string, rreeaadd will terminate a line when it reads a NUL character. - --ee If the standard input is coming from a terminal, rreeaadd - uses rreeaaddlliinnee (see RREEAADDLLIINNEE above) to obtain the line. - RReeaaddlliinnee uses the current (or default, if line editing - was not previously active) editing settings, but uses + --ee If the standard input is coming from a terminal, rreeaadd + uses rreeaaddlliinnee (see RREEAADDLLIINNEE above) to obtain the line. + RReeaaddlliinnee uses the current (or default, if line editing + was not previously active) editing settings, but uses rreeaaddlliinnee's default filename completion. - --EE If the standard input is coming from a terminal, rreeaadd - uses rreeaaddlliinnee (see RREEAADDLLIINNEE above) to obtain the line. - RReeaaddlliinnee uses the current (or default, if line editing - was not previously active) editing settings, but uses + --EE If the standard input is coming from a terminal, rreeaadd + uses rreeaaddlliinnee (see RREEAADDLLIINNEE above) to obtain the line. + RReeaaddlliinnee uses the current (or default, if line editing + was not previously active) editing settings, but uses bash's default completion, including programmable comple- tion. --ii _t_e_x_t - If rreeaaddlliinnee is being used to read the line, rreeaadd places + If rreeaaddlliinnee is being used to read the line, rreeaadd places _t_e_x_t into the editing buffer before editing begins. --nn _n_c_h_a_r_s - rreeaadd returns after reading _n_c_h_a_r_s characters rather than - waiting for a complete line of input, unless it encoun- - ters EOF or rreeaadd times out, but honors a delimiter if it + rreeaadd returns after reading _n_c_h_a_r_s characters rather than + waiting for a complete line of input, unless it encoun- + ters EOF or rreeaadd times out, but honors a delimiter if it reads fewer than _n_c_h_a_r_s characters before the delimiter. --NN _n_c_h_a_r_s - rreeaadd returns after reading exactly _n_c_h_a_r_s characters - rather than waiting for a complete line of input, unless + rreeaadd returns after reading exactly _n_c_h_a_r_s characters + rather than waiting for a complete line of input, unless it encounters EOF or rreeaadd times out. Any delimiter char- - acters in the input are not treated specially and do not + acters in the input are not treated specially and do not cause rreeaadd to return until it has read _n_c_h_a_r_s characters. The result is not split on the characters in IIFFSS; the in- tent is that the variable is assigned exactly the charac- - ters read (with the exception of backslash; see the --rr + ters read (with the exception of backslash; see the --rr option below). --pp _p_r_o_m_p_t Display _p_r_o_m_p_t on standard error, without a trailing new- - line, before attempting to read any input, but only if + line, before attempting to read any input, but only if input is coming from a terminal. --rr Backslash does not act as an escape character. The back- - slash is considered to be part of the line. In particu- - lar, a backslash-newline pair may not then be used as a + slash is considered to be part of the line. In particu- + lar, a backslash-newline pair may not then be used as a line continuation. --ss Silent mode. If input is coming from a terminal, charac- ters are not echoed. --tt _t_i_m_e_o_u_t - Cause rreeaadd to time out and return failure if it does not - read a complete line of input (or a specified number of - characters) within _t_i_m_e_o_u_t seconds. _t_i_m_e_o_u_t may be a - decimal number with a fractional portion following the - decimal point. This option is only effective if rreeaadd is - reading input from a terminal, pipe, or other special - file; it has no effect when reading from regular files. - If rreeaadd times out, it saves any partial input read into - the specified variable _n_a_m_e, and the exit status is - greater than 128. If _t_i_m_e_o_u_t is 0, rreeaadd returns immedi- - ately, without trying to read any data. In this case, - the exit status is 0 if input is available on the speci- - fied file descriptor, or the read will return EOF, non- + Cause rreeaadd to time out and return failure if it does not + read a complete line of input (or a specified number of + characters) within _t_i_m_e_o_u_t seconds. _t_i_m_e_o_u_t may be a + decimal number with a fractional portion following the + decimal point. This option is only effective if rreeaadd is + reading input from a terminal, pipe, or other special + file; it has no effect when reading from regular files. + If rreeaadd times out, it saves any partial input read into + the specified variable _n_a_m_e, and the exit status is + greater than 128. If _t_i_m_e_o_u_t is 0, rreeaadd returns immedi- + ately, without trying to read any data. In this case, + the exit status is 0 if input is available on the speci- + fied file descriptor, or the read will return EOF, non- zero otherwise. - --uu _f_d Read input from file descriptor _f_d instead of the stan- + --uu _f_d Read input from file descriptor _f_d instead of the stan- dard input. - Other than the case where _d_e_l_i_m is the empty string, rreeaadd ig- + Other than the case where _d_e_l_i_m is the empty string, rreeaadd ig- nores any NUL characters in the input. - If no _n_a_m_e_s are supplied, rreeaadd assigns the line read, without - the ending delimiter but otherwise unmodified, to the variable + If no _n_a_m_e_s are supplied, rreeaadd assigns the line read, without + the ending delimiter but otherwise unmodified, to the variable RREEPPLLYY. The exit status is zero, unless end-of-file is encountered, rreeaadd - times out (in which case the status is greater than 128), a + times out (in which case the status is greater than 128), a variable assignment error (such as assigning to a readonly vari- - able) occurs, or an invalid file descriptor is supplied as the + able) occurs, or an invalid file descriptor is supplied as the argument to --uu. rreeaaddoonnllyy [--aaAAff] [--pp] [_n_a_m_e[=_w_o_r_d] ...] - The given _n_a_m_e_s are marked readonly; the values of these _n_a_m_e_s + The given _n_a_m_e_s are marked readonly; the values of these _n_a_m_e_s may not be changed by subsequent assignment or unset. If the --ff - option is supplied, each _n_a_m_e refers to a shell function. The - --aa option restricts the variables to indexed arrays; the --AA op- + option is supplied, each _n_a_m_e refers to a shell function. The + --aa option restricts the variables to indexed arrays; the --AA op- tion restricts the variables to associative arrays. If both op- - tions are supplied, --AA takes precedence. If no _n_a_m_e arguments - are supplied, or if the --pp option is supplied, print a list of - all readonly names. The other options may be used to restrict + tions are supplied, --AA takes precedence. If no _n_a_m_e arguments + are supplied, or if the --pp option is supplied, print a list of + all readonly names. The other options may be used to restrict the output to a subset of the set of readonly names. The --pp op- tion displays output in a format that may be reused as input. - rreeaaddoonnllyy allows the value of a variable to be set at the same + rreeaaddoonnllyy allows the value of a variable to be set at the same time the readonly attribute is changed by following the variable - name with =_v_a_l_u_e. This sets the value of the variable is to + name with =_v_a_l_u_e. This sets the value of the variable is to _v_a_l_u_e while modifying the readonly attribute. - The return status is 0 unless an invalid option is encountered, - one of the _n_a_m_e_s is not a valid shell variable name, or --ff is + The return status is 0 unless an invalid option is encountered, + one of the _n_a_m_e_s is not a valid shell variable name, or --ff is supplied with a _n_a_m_e that is not a function. rreettuurrnn [_n] - Stop executing a shell function or sourced file and return the + Stop executing a shell function or sourced file and return the value specified by _n to its caller. If _n is omitted, the return - status is that of the last command executed. If rreettuurrnn is exe- - cuted by a trap handler, the last command used to determine the + status is that of the last command executed. If rreettuurrnn is exe- + cuted by a trap handler, the last command used to determine the status is the last command executed before the trap handler. If rreettuurrnn is executed during a DDEEBBUUGG trap, the last command used to - determine the status is the last command executed by the trap + determine the status is the last command executed by the trap handler before rreettuurrnn was invoked. When rreettuurrnn is used to terminate execution of a script being ex- - ecuted by the .. (ssoouurrccee) command, it causes the shell to stop - executing that script and return either _n or the exit status of - the last command executed within the script as the exit status - of the script. If _n is supplied, the return value is its least + ecuted by the .. (ssoouurrccee) command, it causes the shell to stop + executing that script and return either _n or the exit status of + the last command executed within the script as the exit status + of the script. If _n is supplied, the return value is its least significant 8 bits. - Any command associated with the RREETTUURRNN trap is executed before + Any command associated with the RREETTUURRNN trap is executed before execution resumes after the function or script. - The return status is non-zero if rreettuurrnn is supplied a non-nu- + The return status is non-zero if rreettuurrnn is supplied a non-nu- meric argument, or is used outside a function and not during ex- ecution of a script by .. or ssoouurrccee. sseett [--aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [--oo _o_p_t_i_o_n_-_n_a_m_e] [----] [--] [_a_r_g ...] sseett [++aabbeeffhhkkmmnnppttuuvvxxBBCCEEHHPPTT] [++oo _o_p_t_i_o_n_-_n_a_m_e] [----] [--] [_a_r_g ...] sseett --oo - sseett ++oo Without options, display the name and value of each shell vari- - able in a format that can be reused as input for setting or re- + sseett ++oo Without options, display the name and value of each shell vari- + able in a format that can be reused as input for setting or re- setting the currently-set variables. Read-only variables cannot - be reset. In posix mode, only shell variables are listed. The - output is sorted according to the current locale. When options - are specified, they set or unset shell attributes. Any argu- - ments remaining after option processing are treated as values + be reset. In posix mode, only shell variables are listed. The + output is sorted according to the current locale. When options + are specified, they set or unset shell attributes. Any argu- + ments remaining after option processing are treated as values for the positional parameters and are assigned, in order, to $$11, - $$22, ..., $$_n. Options, if specified, have the following mean- + $$22, ..., $$_n. Options, if specified, have the following mean- ings: --aa Each variable or function that is created or modified is - given the export attribute and marked for export to the + given the export attribute and marked for export to the environment of subsequent commands. - --bb Report the status of terminated background jobs immedi- + --bb Report the status of terminated background jobs immedi- ately, rather than before the next primary prompt or af- - ter a foreground command terminates. This is effective + ter a foreground command terminates. This is effective only when job control is enabled. - --ee Exit immediately if a _p_i_p_e_l_i_n_e (which may consist of a - single _s_i_m_p_l_e _c_o_m_m_a_n_d), a _l_i_s_t, or a _c_o_m_p_o_u_n_d _c_o_m_m_a_n_d + --ee Exit immediately if a _p_i_p_e_l_i_n_e (which may consist of a + single _s_i_m_p_l_e _c_o_m_m_a_n_d), a _l_i_s_t, or a _c_o_m_p_o_u_n_d _c_o_m_m_a_n_d (see SSHHEELLLL GGRRAAMMMMAARR above), exits with a non-zero status. - The shell does not exit if the command that fails is - part of the command list immediately following a wwhhiillee - or uunnttiill reserved word, part of the test following the - iiff or eelliiff reserved words, part of any command executed - in a &&&& or |||| list except the command following the fi- - nal &&&& or ||||, any command in a pipeline but the last - (subject to the state of the ppiippeeffaaiill shell option), or - if the command's return value is being inverted with !!. - If a compound command other than a subshell returns a - non-zero status because a command failed while --ee was - being ignored, the shell does not exit. A trap on EERRRR, + The shell does not exit if the command that fails is + part of the command list immediately following a wwhhiillee + or uunnttiill reserved word, part of the test following the + iiff or eelliiff reserved words, part of any command executed + in a &&&& or |||| list except the command following the fi- + nal &&&& or ||||, any command in a pipeline but the last + (subject to the state of the ppiippeeffaaiill shell option), or + if the command's return value is being inverted with !!. + If a compound command other than a subshell returns a + non-zero status because a command failed while --ee was + being ignored, the shell does not exit. A trap on EERRRR, if set, is executed before the shell exits. This option applies to the shell environment and each subshell envi- - ronment separately (see CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENNTT + ronment separately (see CCOOMMMMAANNDD EEXXEECCUUTTIIOONN EENNVVIIRROONNMMEENNTT above), and may cause subshells to exit before executing all the commands in the subshell. - If a compound command or shell function executes in a - context where --ee is being ignored, none of the commands - executed within the compound command or function body - will be affected by the --ee setting, even if --ee is set - and a command returns a failure status. If a compound - command or shell function sets --ee while executing in a - context where --ee is ignored, that setting will not have - any effect until the compound command or the command + If a compound command or shell function executes in a + context where --ee is being ignored, none of the commands + executed within the compound command or function body + will be affected by the --ee setting, even if --ee is set + and a command returns a failure status. If a compound + command or shell function sets --ee while executing in a + context where --ee is ignored, that setting will not have + any effect until the compound command or the command containing the function call completes. --ff Disable pathname expansion. - --hh Remember the location of commands as they are looked up + --hh Remember the location of commands as they are looked up for execution. This is enabled by default. - --kk All arguments in the form of assignment statements are - placed in the environment for a command, not just those + --kk All arguments in the form of assignment statements are + placed in the environment for a command, not just those that precede the command name. - --mm Monitor mode. Job control is enabled. This option is - on by default for interactive shells on systems that - support it (see JJOOBB CCOONNTTRROOLL above). All processes run + --mm Monitor mode. Job control is enabled. This option is + on by default for interactive shells on systems that + support it (see JJOOBB CCOONNTTRROOLL above). All processes run in a separate process group. When a background job com- pletes, the shell prints a line containing its exit sta- tus. --nn Read commands but do not execute them. This may be used - to check a shell script for syntax errors. This is ig- + to check a shell script for syntax errors. This is ig- nored by interactive shells. --oo _o_p_t_i_o_n_-_n_a_m_e The _o_p_t_i_o_n_-_n_a_m_e can be one of the following: @@ -6509,10 +6512,10 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS Same as --aa. bbrraacceeeexxppaanndd Same as --BB. - eemmaaccss Use an emacs-style command line editing inter- + eemmaaccss Use an emacs-style command line editing inter- face. This is enabled by default when the shell is interactive, unless the shell is started with - the ----nnooeeddiittiinngg option. This also affects the + the ----nnooeeddiittiinngg option. This also affects the editing interface used for rreeaadd --ee. eerrrreexxiitt Same as --ee. eerrrrttrraaccee @@ -6526,7 +6529,7 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS HHIISSTTOORRYY. This option is on by default in inter- active shells. iiggnnoorreeeeooff - The effect is as if the shell command + The effect is as if the shell command "IGNOREEOF=10" had been executed (see SShheellll VVaarriiaabblleess above). kkeeyywwoorrdd Same as --kk. @@ -6542,184 +6545,184 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS pphhyyssiiccaall Same as --PP. ppiippeeffaaiill - If set, the return value of a pipeline is the - value of the last (rightmost) command to exit - with a non-zero status, or zero if all commands - in the pipeline exit successfully. This option + If set, the return value of a pipeline is the + value of the last (rightmost) command to exit + with a non-zero status, or zero if all commands + in the pipeline exit successfully. This option is disabled by default. - ppoossiixx Enable posix mode; change the behavior of bbaasshh - where the default operation differs from the - POSIX standard to match the standard. See SSEEEE - AALLSSOO below for a reference to a document that + ppoossiixx Enable posix mode; change the behavior of bbaasshh + where the default operation differs from the + POSIX standard to match the standard. See SSEEEE + AALLSSOO below for a reference to a document that details how posix mode affects bash's behavior. pprriivviilleeggeedd Same as --pp. vveerrbboossee Same as --vv. - vvii Use a vi-style command line editing interface. + vvii Use a vi-style command line editing interface. This also affects the editing interface used for rreeaadd --ee. xxttrraaccee Same as --xx. - If --oo is supplied with no _o_p_t_i_o_n_-_n_a_m_e, sseett prints the - current shell option settings. If ++oo is supplied with - no _o_p_t_i_o_n_-_n_a_m_e, sseett prints a series of sseett commands to - recreate the current option settings on the standard + If --oo is supplied with no _o_p_t_i_o_n_-_n_a_m_e, sseett prints the + current shell option settings. If ++oo is supplied with + no _o_p_t_i_o_n_-_n_a_m_e, sseett prints a series of sseett commands to + recreate the current option settings on the standard output. - --pp Turn on _p_r_i_v_i_l_e_g_e_d mode. In this mode, the shell does - not read the $$EENNVV and $$BBAASSHH__EENNVV files, shell functions - are not inherited from the environment, and the SSHHEELL-- - LLOOPPTTSS, BBAASSHHOOPPTTSS, CCDDPPAATTHH, and GGLLOOBBIIGGNNOORREE variables, if - they appear in the environment, are ignored. If the - shell is started with the effective user (group) id not - equal to the real user (group) id, and the --pp option is - not supplied, these actions are taken and the effective + --pp Turn on _p_r_i_v_i_l_e_g_e_d mode. In this mode, the shell does + not read the $$EENNVV and $$BBAASSHH__EENNVV files, shell functions + are not inherited from the environment, and the SSHHEELL-- + LLOOPPTTSS, BBAASSHHOOPPTTSS, CCDDPPAATTHH, and GGLLOOBBIIGGNNOORREE variables, if + they appear in the environment, are ignored. If the + shell is started with the effective user (group) id not + equal to the real user (group) id, and the --pp option is + not supplied, these actions are taken and the effective user id is set to the real user id. If the --pp option is supplied at startup, the effective user id is not reset. - Turning this option off causes the effective user and + Turning this option off causes the effective user and group ids to be set to the real user and group ids. --rr Enable restricted shell mode. This option cannot be un- set once it has been set. --tt Exit after reading and executing one command. --uu Treat unset variables and parameters other than the spe- - cial parameters "@" and "*", or array variables sub- - scripted with "@" or "*", as an error when performing - parameter expansion. If expansion is attempted on an - unset variable or parameter, the shell prints an error - message, and, if not interactive, exits with a non-zero + cial parameters "@" and "*", or array variables sub- + scripted with "@" or "*", as an error when performing + parameter expansion. If expansion is attempted on an + unset variable or parameter, the shell prints an error + message, and, if not interactive, exits with a non-zero status. --vv Print shell input lines as they are read. - --xx After expanding each _s_i_m_p_l_e _c_o_m_m_a_n_d, ffoorr command, ccaassee + --xx After expanding each _s_i_m_p_l_e _c_o_m_m_a_n_d, ffoorr command, ccaassee command, sseelleecctt command, or arithmetic ffoorr command, dis- - play the expanded value of PPSS44, followed by the command - and its expanded arguments or associated word list, to + play the expanded value of PPSS44, followed by the command + and its expanded arguments or associated word list, to the standard error. - --BB The shell performs brace expansion (see BBrraaccee EExxppaannssiioonn + --BB The shell performs brace expansion (see BBrraaccee EExxppaannssiioonn above). This is on by default. - --CC If set, bbaasshh does not overwrite an existing file with - the >>, >>&&, and <<>> redirection operators. Using the - redirection operator >>|| instead of >> will override this + --CC If set, bbaasshh does not overwrite an existing file with + the >>, >>&&, and <<>> redirection operators. Using the + redirection operator >>|| instead of >> will override this and force the creation of an output file. --EE If set, any trap on EERRRR is inherited by shell functions, - command substitutions, and commands executed in a sub- - shell environment. The EERRRR trap is normally not inher- + command substitutions, and commands executed in a sub- + shell environment. The EERRRR trap is normally not inher- ited in such cases. --HH Enable !! style history substitution. This option is on by default when the shell is interactive. - --PP If set, the shell does not resolve symbolic links when - executing commands such as ccdd that change the current + --PP If set, the shell does not resolve symbolic links when + executing commands such as ccdd that change the current working directory. It uses the physical directory structure instead. By default, bbaasshh follows the logical - chain of directories when performing commands which + chain of directories when performing commands which change the current directory. - --TT If set, any traps on DDEEBBUUGG and RREETTUURRNN are inherited by + --TT If set, any traps on DDEEBBUUGG and RREETTUURRNN are inherited by shell functions, command substitutions, and commands ex- - ecuted in a subshell environment. The DDEEBBUUGG and RREETTUURRNN + ecuted in a subshell environment. The DDEEBBUUGG and RREETTUURRNN traps are normally not inherited in such cases. ---- If no arguments follow this option, unset the positional parameters. Otherwise, set the positional parameters to the _a_r_gs, even if some of them begin with a --. -- Signal the end of options, and assign all remaining _a_r_gs to the positional parameters. The --xx and --vv options are - turned off. If there are no _a_r_gs, the positional para- + turned off. If there are no _a_r_gs, the positional para- meters remain unchanged. - The options are off by default unless otherwise noted. Using + - rather than - causes these options to be turned off. The op- + The options are off by default unless otherwise noted. Using + + rather than - causes these options to be turned off. The op- tions can also be specified as arguments to an invocation of the - shell. The current set of options may be found in $$--. The re- - turn status is always zero unless an invalid option is encoun- + shell. The current set of options may be found in $$--. The re- + turn status is always zero unless an invalid option is encoun- tered. sshhiifftt [_n] Rename positional parameters from _n+1 ... to $$11 ........ Parameters - represented by the numbers $$## down to $$##-_n+1 are unset. _n must - be a non-negative number less than or equal to $$##. If _n is 0, - no parameters are changed. If _n is not given, it is assumed to - be 1. If _n is greater than $$##, the positional parameters are - not changed. The return status is greater than zero if _n is + represented by the numbers $$## down to $$##-_n+1 are unset. _n must + be a non-negative number less than or equal to $$##. If _n is 0, + no parameters are changed. If _n is not given, it is assumed to + be 1. If _n is greater than $$##, the positional parameters are + not changed. The return status is greater than zero if _n is greater than $$## or less than zero; otherwise 0. sshhoopptt [--ppqqssuu] [--oo] [_o_p_t_n_a_m_e ...] - Toggle the values of settings controlling optional shell behav- - ior. The settings can be either those listed below, or, if the + Toggle the values of settings controlling optional shell behav- + ior. The settings can be either those listed below, or, if the --oo option is used, those available with the --oo option to the sseett builtin command. - With no options, or with the --pp option, display a list of all - settable options, with an indication of whether or not each is - set; if any _o_p_t_n_a_m_e_s are supplied, the output is restricted to + With no options, or with the --pp option, display a list of all + settable options, with an indication of whether or not each is + set; if any _o_p_t_n_a_m_e_s are supplied, the output is restricted to those options. The --pp option displays output in a form that may be reused as input. Other options have the following meanings: --ss Enable (set) each _o_p_t_n_a_m_e. --uu Disable (unset) each _o_p_t_n_a_m_e. - --qq Suppresses normal output (quiet mode); the return status + --qq Suppresses normal output (quiet mode); the return status indicates whether the _o_p_t_n_a_m_e is set or unset. If multi- - ple _o_p_t_n_a_m_e arguments are supplied with --qq, the return + ple _o_p_t_n_a_m_e arguments are supplied with --qq, the return status is zero if all _o_p_t_n_a_m_e_s are enabled; non-zero oth- erwise. - --oo Restricts the values of _o_p_t_n_a_m_e to be those defined for + --oo Restricts the values of _o_p_t_n_a_m_e to be those defined for the --oo option to the sseett builtin. - If either --ss or --uu is used with no _o_p_t_n_a_m_e arguments, sshhoopptt - shows only those options which are set or unset, respectively. - Unless otherwise noted, the sshhoopptt options are disabled (unset) + If either --ss or --uu is used with no _o_p_t_n_a_m_e arguments, sshhoopptt + shows only those options which are set or unset, respectively. + Unless otherwise noted, the sshhoopptt options are disabled (unset) by default. - The return status when listing options is zero if all _o_p_t_n_a_m_e_s - are enabled, non-zero otherwise. When setting or unsetting op- - tions, the return status is zero unless an _o_p_t_n_a_m_e is not a + The return status when listing options is zero if all _o_p_t_n_a_m_e_s + are enabled, non-zero otherwise. When setting or unsetting op- + tions, the return status is zero unless an _o_p_t_n_a_m_e is not a valid shell option. The list of sshhoopptt options is: aarrrraayy__eexxppaanndd__oonnccee - If set, the shell suppresses multiple evaluation of as- + If set, the shell suppresses multiple evaluation of as- sociative and indexed array subscripts during arithmetic expression evaluation, while executing builtins that can - perform variable assignments, and while executing + perform variable assignments, and while executing builtins that perform array dereferencing. aassssoocc__eexxppaanndd__oonnccee Deprecated; a synonym for aarrrraayy__eexxppaanndd__oonnccee. - aauuttooccdd If set, a command name that is the name of a directory - is executed as if it were the argument to the ccdd com- + aauuttooccdd If set, a command name that is the name of a directory + is executed as if it were the argument to the ccdd com- mand. This option is only used by interactive shells. bbaasshh__ssoouurrccee__ffuullllppaatthh - If set, filenames added to the BBAASSHH__SSOOUURRCCEE array vari- - able are converted to full pathnames (see SShheellll VVaarrii-- + If set, filenames added to the BBAASSHH__SSOOUURRCCEE array vari- + able are converted to full pathnames (see SShheellll VVaarrii-- aabblleess above). ccddaabbllee__vvaarrss - If set, an argument to the ccdd builtin command that is - not a directory is assumed to be the name of a variable + If set, an argument to the ccdd builtin command that is + not a directory is assumed to be the name of a variable whose value is the directory to change to. - ccddssppeellll If set, the ccdd command attempts to correct minor errors - in the spelling of a directory component. Minor errors - include transposed characters, a missing character, and + ccddssppeellll If set, the ccdd command attempts to correct minor errors + in the spelling of a directory component. Minor errors + include transposed characters, a missing character, and one extra character. If ccdd corrects the directory name, - it prints the corrected filename, and the command pro- + it prints the corrected filename, and the command pro- ceeds. This option is only used by interactive shells. cchheecckkhhaasshh If set, bbaasshh checks that a command found in the hash ta- - ble exists before trying to execute it. If a hashed - command no longer exists, bbaasshh performs a normal path + ble exists before trying to execute it. If a hashed + command no longer exists, bbaasshh performs a normal path search. cchheecckkjjoobbss If set, bbaasshh lists the status of any stopped and running - jobs before exiting an interactive shell. If any jobs + jobs before exiting an interactive shell. If any jobs are running, bbaasshh defers the exit until a second exit is - attempted without an intervening command (see JJOOBB CCOONN-- - TTRROOLL above). The shell always postpones exiting if any + attempted without an intervening command (see JJOOBB CCOONN-- + TTRROOLL above). The shell always postpones exiting if any jobs are stopped. cchheecckkwwiinnssiizzee - If set, bbaasshh checks the window size after each external - (non-builtin) command and, if necessary, updates the - values of LLIINNEESS and CCOOLLUUMMNNSS, using the file descriptor - associated with the standard error if it is a terminal. + If set, bbaasshh checks the window size after each external + (non-builtin) command and, if necessary, updates the + values of LLIINNEESS and CCOOLLUUMMNNSS, using the file descriptor + associated with the standard error if it is a terminal. This option is enabled by default. - ccmmddhhiisstt If set, bbaasshh attempts to save all lines of a multiple- - line command in the same history entry. This allows - easy re-editing of multi-line commands. This option is - enabled by default, but only has an effect if command + ccmmddhhiisstt If set, bbaasshh attempts to save all lines of a multiple- + line command in the same history entry. This allows + easy re-editing of multi-line commands. This option is + enabled by default, but only has an effect if command history is enabled, as described above under HHIISSTTOORRYY. ccoommppaatt3311 ccoommppaatt3322 @@ -6728,143 +6731,143 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS ccoommppaatt4422 ccoommppaatt4433 ccoommppaatt4444 - These control aspects of the shell's compatibility mode + These control aspects of the shell's compatibility mode (see SSHHEELLLL CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE below). ccoommpplleettee__ffuullllqquuoottee - If set, bbaasshh quotes all shell metacharacters in file- - names and directory names when performing completion. + If set, bbaasshh quotes all shell metacharacters in file- + names and directory names when performing completion. If not set, bbaasshh removes metacharacters such as the dol- - lar sign from the set of characters that will be quoted - in completed filenames when these metacharacters appear - in shell variable references in words to be completed. - This means that dollar signs in variable names that ex- - pand to directories will not be quoted; however, any - dollar signs appearing in filenames will not be quoted, - either. This is active only when bash is using back- - slashes to quote completed filenames. This variable is - set by default, which is the default bash behavior in + lar sign from the set of characters that will be quoted + in completed filenames when these metacharacters appear + in shell variable references in words to be completed. + This means that dollar signs in variable names that ex- + pand to directories will not be quoted; however, any + dollar signs appearing in filenames will not be quoted, + either. This is active only when bash is using back- + slashes to quote completed filenames. This variable is + set by default, which is the default bash behavior in versions through 4.2. ddiirreexxppaanndd - If set, bbaasshh replaces directory names with the results - of word expansion when performing filename completion. + If set, bbaasshh replaces directory names with the results + of word expansion when performing filename completion. This changes the contents of the rreeaaddlliinnee editing - buffer. If not set, bbaasshh attempts to preserve what the + buffer. If not set, bbaasshh attempts to preserve what the user typed. ddiirrssppeellll - If set, bbaasshh attempts spelling correction on directory - names during word completion if the directory name ini- + If set, bbaasshh attempts spelling correction on directory + names during word completion if the directory name ini- tially supplied does not exist. - ddoottgglloobb If set, bbaasshh includes filenames beginning with a "." in - the results of pathname expansion. The filenames _. and + ddoottgglloobb If set, bbaasshh includes filenames beginning with a "." in + the results of pathname expansion. The filenames _. and _._. must always be matched explicitly, even if ddoottgglloobb is set. eexxeeccffaaiill If set, a non-interactive shell will not exit if it can- - not execute the file specified as an argument to the - eexxeecc builtin. An interactive shell does not exit if + not execute the file specified as an argument to the + eexxeecc builtin. An interactive shell does not exit if eexxeecc fails. eexxppaanndd__aalliiaasseess - If set, aliases are expanded as described above under + If set, aliases are expanded as described above under AALLIIAASSEESS. This option is enabled by default for interac- tive shells. eexxttddeebbuugg - If set at shell invocation, or in a shell startup file, + If set at shell invocation, or in a shell startup file, arrange to execute the debugger profile before the shell - starts, identical to the ----ddeebbuuggggeerr option. If set af- - ter invocation, behavior intended for use by debuggers + starts, identical to the ----ddeebbuuggggeerr option. If set af- + ter invocation, behavior intended for use by debuggers is enabled: 11.. The --FF option to the ddeeccllaarree builtin displays the source file name and line number corresponding to each function name supplied as an argument. - 22.. If the command run by the DDEEBBUUGG trap returns a - non-zero value, the next command is skipped and + 22.. If the command run by the DDEEBBUUGG trap returns a + non-zero value, the next command is skipped and not executed. - 33.. If the command run by the DDEEBBUUGG trap returns a - value of 2, and the shell is executing in a sub- - routine (a shell function or a shell script exe- - cuted by the .. or ssoouurrccee builtins), the shell + 33.. If the command run by the DDEEBBUUGG trap returns a + value of 2, and the shell is executing in a sub- + routine (a shell function or a shell script exe- + cuted by the .. or ssoouurrccee builtins), the shell simulates a call to rreettuurrnn. - 44.. BBAASSHH__AARRGGCC and BBAASSHH__AARRGGVV are updated as described + 44.. BBAASSHH__AARRGGCC and BBAASSHH__AARRGGVV are updated as described in their descriptions above). - 55.. Function tracing is enabled: command substitu- + 55.. Function tracing is enabled: command substitu- tion, shell functions, and subshells invoked with (( _c_o_m_m_a_n_d )) inherit the DDEEBBUUGG and RREETTUURRNN traps. - 66.. Error tracing is enabled: command substitution, - shell functions, and subshells invoked with (( + 66.. Error tracing is enabled: command substitution, + shell functions, and subshells invoked with (( _c_o_m_m_a_n_d )) inherit the EERRRR trap. - eexxttgglloobb If set, enable the extended pattern matching features + eexxttgglloobb If set, enable the extended pattern matching features described above under PPaatthhnnaammee EExxppaannssiioonn. eexxttqquuoottee - If set, $$'_s_t_r_i_n_g' and $$"_s_t_r_i_n_g" quoting is performed - within $${{_p_a_r_a_m_e_t_e_r}} expansions enclosed in double + If set, $$'_s_t_r_i_n_g' and $$"_s_t_r_i_n_g" quoting is performed + within $${{_p_a_r_a_m_e_t_e_r}} expansions enclosed in double quotes. This option is enabled by default. ffaaiillgglloobb - If set, patterns which fail to match filenames during + If set, patterns which fail to match filenames during pathname expansion result in an expansion error. ffoorrccee__ffiiggnnoorree - If set, the suffixes specified by the FFIIGGNNOORREE shell - variable cause words to be ignored when performing word + If set, the suffixes specified by the FFIIGGNNOORREE shell + variable cause words to be ignored when performing word completion even if the ignored words are the only possi- - ble completions. See SShheellll VVaarriiaabblleess above for a de- - scription of FFIIGGNNOORREE. This option is enabled by de- + ble completions. See SShheellll VVaarriiaabblleess above for a de- + scription of FFIIGGNNOORREE. This option is enabled by de- fault. gglloobbaasscciiiirraannggeess - If set, range expressions used in pattern matching - bracket expressions (see PPaatttteerrnn MMaattcchhiinngg above) behave - as if in the traditional C locale when performing com- - parisons. That is, pattern matching does not take the - current locale's collating sequence into account, so bb - will not collate between AA and BB, and upper-case and + If set, range expressions used in pattern matching + bracket expressions (see PPaatttteerrnn MMaattcchhiinngg above) behave + as if in the traditional C locale when performing com- + parisons. That is, pattern matching does not take the + current locale's collating sequence into account, so bb + will not collate between AA and BB, and upper-case and lower-case ASCII characters will collate together. gglloobbsskkiippddoottss - If set, pathname expansion will never match the file- - names _. and _._., even if the pattern begins with a ".". + If set, pathname expansion will never match the file- + names _. and _._., even if the pattern begins with a ".". This option is enabled by default. gglloobbssttaarr If set, the pattern **** used in a pathname expansion con- - text will match all files and zero or more directories - and subdirectories. If the pattern is followed by a //, + text will match all files and zero or more directories + and subdirectories. If the pattern is followed by a //, only directories and subdirectories match. ggnnuu__eerrrrffmmtt If set, shell error messages are written in the standard GNU error message format. hhiissttaappppeenndd - If set, the history list is appended to the file named + If set, the history list is appended to the file named by the value of the HHIISSTTFFIILLEE variable when the shell ex- its, rather than overwriting the file. hhiissttrreeeeddiitt - If set, and rreeaaddlliinnee is being used, the user is given - the opportunity to re-edit a failed history substitu- + If set, and rreeaaddlliinnee is being used, the user is given + the opportunity to re-edit a failed history substitu- tion. hhiissttvveerriiffyy - If set, and rreeaaddlliinnee is being used, the results of his- - tory substitution are not immediately passed to the - shell parser. Instead, the resulting line is loaded + If set, and rreeaaddlliinnee is being used, the results of his- + tory substitution are not immediately passed to the + shell parser. Instead, the resulting line is loaded into the rreeaaddlliinnee editing buffer, allowing further modi- fication. hhoossttccoommpplleettee If set, and rreeaaddlliinnee is being used, bbaasshh will attempt to - perform hostname completion when a word containing a @@ - is being completed (see CCoommpplleettiinngg under RREEAADDLLIINNEE + perform hostname completion when a word containing a @@ + is being completed (see CCoommpplleettiinngg under RREEAADDLLIINNEE above). This is enabled by default. hhuuppoonneexxiitt If set, bbaasshh will send SSIIGGHHUUPP to all jobs when an inter- active login shell exits. iinnhheerriitt__eerrrreexxiitt - If set, command substitution inherits the value of the - eerrrreexxiitt option, instead of unsetting it in the subshell - environment. This option is enabled when posix mode is + If set, command substitution inherits the value of the + eerrrreexxiitt option, instead of unsetting it in the subshell + environment. This option is enabled when posix mode is enabled. iinntteerraaccttiivvee__ccoommmmeennttss - In an interactive shell, a word beginning with ## causes - that word and all remaining characters on that line to - be ignored, as in a non-interactive shell (see CCOOMMMMEENNTTSS + In an interactive shell, a word beginning with ## causes + that word and all remaining characters on that line to + be ignored, as in a non-interactive shell (see CCOOMMMMEENNTTSS above). This option is enabled by default. llaassttppiippee - If set, and job control is not active, the shell runs + If set, and job control is not active, the shell runs the last command of a pipeline not executed in the back- ground in the current shell environment. - lliitthhiisstt If set, and the ccmmddhhiisstt option is enabled, multi-line + lliitthhiisstt If set, and the ccmmddhhiisstt option is enabled, multi-line commands are saved to the history with embedded newlines rather than using semicolon separators where possible. llooccaallvvaarr__iinnhheerriitt @@ -6873,37 +6876,37 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS scope before any new value is assigned. The nameref at- tribute is not inherited. llooccaallvvaarr__uunnsseett - If set, calling uunnsseett on local variables in previous - function scopes marks them so subsequent lookups find + If set, calling uunnsseett on local variables in previous + function scopes marks them so subsequent lookups find them unset until that function returns. This is identi- - cal to the behavior of unsetting local variables at the + cal to the behavior of unsetting local variables at the current function scope. llooggiinn__sshheellll - The shell sets this option if it is started as a login - shell (see IINNVVOOCCAATTIIOONN above). The value may not be + The shell sets this option if it is started as a login + shell (see IINNVVOOCCAATTIIOONN above). The value may not be changed. mmaaiillwwaarrnn - If set, and a file that bbaasshh is checking for mail has - been accessed since the last time it was checked, bbaasshh - displays the message "The mail in _m_a_i_l_f_i_l_e has been + If set, and a file that bbaasshh is checking for mail has + been accessed since the last time it was checked, bbaasshh + displays the message "The mail in _m_a_i_l_f_i_l_e has been read". nnoo__eemmppttyy__ccmmdd__ccoommpplleettiioonn If set, and rreeaaddlliinnee is being used, bbaasshh does not search - PPAATTHH for possible completions when completion is at- + PPAATTHH for possible completions when completion is at- tempted on an empty line. nnooccaasseegglloobb - If set, bbaasshh matches filenames in a case-insensitive + If set, bbaasshh matches filenames in a case-insensitive fashion when performing pathname expansion (see PPaatthhnnaammee EExxppaannssiioonn above). nnooccaasseemmaattcchh - If set, bbaasshh matches patterns in a case-insensitive + If set, bbaasshh matches patterns in a case-insensitive fashion when performing matching while executing ccaassee or [[[[ conditional commands, when performing pattern substi- - tution word expansions, or when filtering possible com- + tution word expansions, or when filtering possible com- pletions as part of programmable completion. nnooeexxppaanndd__ttrraannssllaattiioonn - If set, bbaasshh encloses the translated results of $$""..."" - quoting in single quotes instead of double quotes. If + If set, bbaasshh encloses the translated results of $$""..."" + quoting in single quotes instead of double quotes. If the string is not translated, this has no effect. nnuullllgglloobb If set, pathname expansion patterns which match no files @@ -6911,73 +6914,73 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS removed, rather than expanding to themselves. ppaattssuubb__rreeppllaacceemmeenntt If set, bbaasshh expands occurrences of && in the replacement - string of pattern substitution to the text matched by - the pattern, as described under PPaarraammeetteerr EExxppaannssiioonn + string of pattern substitution to the text matched by + the pattern, as described under PPaarraammeetteerr EExxppaannssiioonn above. This option is enabled by default. pprrooggccoommpp - If set, enable the programmable completion facilities + If set, enable the programmable completion facilities (see PPrrooggrraammmmaabbllee CCoommpplleettiioonn above). This option is en- abled by default. pprrooggccoommpp__aalliiaass - If set, and programmable completion is enabled, bbaasshh - treats a command name that doesn't have any completions + If set, and programmable completion is enabled, bbaasshh + treats a command name that doesn't have any completions as a possible alias and attempts alias expansion. If it - has an alias, bbaasshh attempts programmable completion us- + has an alias, bbaasshh attempts programmable completion us- ing the command word resulting from the expanded alias. pprroommppttvvaarrss If set, prompt strings undergo parameter expansion, com- - mand substitution, arithmetic expansion, and quote re- - moval after being expanded as described in PPRROOMMPPTTIINNGG + mand substitution, arithmetic expansion, and quote re- + moval after being expanded as described in PPRROOMMPPTTIINNGG above. This option is enabled by default. rreessttrriicctteedd__sshheellll - The shell sets this option if it is started in re- - stricted mode (see RREESSTTRRIICCTTEEDD SSHHEELLLL below). The value - may not be changed. This is not reset when the startup - files are executed, allowing the startup files to dis- + The shell sets this option if it is started in re- + stricted mode (see RREESSTTRRIICCTTEEDD SSHHEELLLL below). The value + may not be changed. This is not reset when the startup + files are executed, allowing the startup files to dis- cover whether or not a shell is restricted. sshhiifftt__vveerrbboossee - If set, the sshhiifftt builtin prints an error message when + If set, the sshhiifftt builtin prints an error message when the shift count exceeds the number of positional parame- ters. ssoouurrcceeppaatthh If set, the .. (ssoouurrccee) builtin uses the value of PPAATTHH to - find the directory containing the file supplied as an - argument when the --pp option is not supplied. This op- + find the directory containing the file supplied as an + argument when the --pp option is not supplied. This op- tion is enabled by default. vvaarrrreeddiirr__cclloossee - If set, the shell automatically closes file descriptors - assigned using the _{_v_a_r_n_a_m_e_} redirection syntax (see + If set, the shell automatically closes file descriptors + assigned using the _{_v_a_r_n_a_m_e_} redirection syntax (see RREEDDIIRREECCTTIIOONN above) instead of leaving them open when the command completes. xxppgg__eecchhoo - If set, the eecchhoo builtin expands backslash-escape se- - quences by default. If the ppoossiixx shell option is also + If set, the eecchhoo builtin expands backslash-escape se- + quences by default. If the ppoossiixx shell option is also enabled, eecchhoo does not interpret any options. ssuussppeenndd [--ff] - Suspend the execution of this shell until it receives a SSIIGGCCOONNTT - signal. A login shell, or a shell without job control enabled, - cannot be suspended; the --ff option will override this and force - the suspension. The return status is 0 unless the shell is a - login shell or job control is not enabled and --ff is not sup- + Suspend the execution of this shell until it receives a SSIIGGCCOONNTT + signal. A login shell, or a shell without job control enabled, + cannot be suspended; the --ff option will override this and force + the suspension. The return status is 0 unless the shell is a + login shell or job control is not enabled and --ff is not sup- plied. tteesstt _e_x_p_r [[ _e_x_p_r ]] Return a status of 0 (true) or 1 (false) depending on the evalu- - ation of the conditional expression _e_x_p_r. Each operator and - operand must be a separate argument. Expressions are composed - of the primaries described above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS. - tteesstt does not accept any options, nor does it accept and ignore + ation of the conditional expression _e_x_p_r. Each operator and + operand must be a separate argument. Expressions are composed + of the primaries described above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS. + tteesstt does not accept any options, nor does it accept and ignore an argument of ---- as signifying the end of options. - Expressions may be combined using the following operators, - listed in decreasing order of precedence. The evaluation de- + Expressions may be combined using the following operators, + listed in decreasing order of precedence. The evaluation de- pends on the number of arguments; see below. tteesstt uses operator precedence when there are five or more arguments. !! _e_x_p_r True if _e_x_p_r is false. (( _e_x_p_r )) - Returns the value of _e_x_p_r. This may be used to override + Returns the value of _e_x_p_r. This may be used to override normal operator precedence. _e_x_p_r_1 -aa _e_x_p_r_2 True if both _e_x_p_r_1 and _e_x_p_r_2 are true. @@ -6994,111 +6997,111 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS null. 2 arguments If the first argument is !!, the expression is true if and - only if the second argument is null. If the first argu- - ment is one of the unary conditional operators listed - above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the expression is + only if the second argument is null. If the first argu- + ment is one of the unary conditional operators listed + above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the expression is true if the unary test is true. If the first argument is not a valid unary conditional operator, the expression is false. 3 arguments The following conditions are applied in the order listed. - If the second argument is one of the binary conditional + If the second argument is one of the binary conditional operators listed above under CCOONNDDIITTIIOONNAALL EEXXPPRREESSSSIIOONNSS, the result of the expression is the result of the binary test - using the first and third arguments as operands. The --aa - and --oo operators are considered binary operators when - there are three arguments. If the first argument is !!, - the value is the negation of the two-argument test using + using the first and third arguments as operands. The --aa + and --oo operators are considered binary operators when + there are three arguments. If the first argument is !!, + the value is the negation of the two-argument test using the second and third arguments. If the first argument is exactly (( and the third argument is exactly )), the result - is the one-argument test of the second argument. Other- + is the one-argument test of the second argument. Other- wise, the expression is false. 4 arguments The following conditions are applied in the order listed. If the first argument is !!, the result is the negation of - the three-argument expression composed of the remaining - arguments. If the first argument is exactly (( and the + the three-argument expression composed of the remaining + arguments. If the first argument is exactly (( and the fourth argument is exactly )), the result is the two-argu- - ment test of the second and third arguments. Otherwise, - the expression is parsed and evaluated according to + ment test of the second and third arguments. Otherwise, + the expression is parsed and evaluated according to precedence using the rules listed above. 5 or more arguments - The expression is parsed and evaluated according to + The expression is parsed and evaluated according to precedence using the rules listed above. When the shell is in posix mode, or if the expression is part of the [[[[ command, the << and >> operators sort using the current lo- - cale. If the shell is not in posix mode, the tteesstt and [[ com- + cale. If the shell is not in posix mode, the tteesstt and [[ com- mands sort lexicographically using ASCII ordering. - The historical operator-precedence parsing with 4 or more argu- - ments can lead to ambiguities when it encounters strings that - look like primaries. The POSIX standard has deprecated the --aa - and --oo primaries and enclosing expressions within parentheses. - Scripts should no longer use them. It's much more reliable to - restrict test invocations to a single primary, and to replace + The historical operator-precedence parsing with 4 or more argu- + ments can lead to ambiguities when it encounters strings that + look like primaries. The POSIX standard has deprecated the --aa + and --oo primaries and enclosing expressions within parentheses. + Scripts should no longer use them. It's much more reliable to + restrict test invocations to a single primary, and to replace uses of --aa and --oo with the shell's &&&& and |||| list operators. - ttiimmeess Print the accumulated user and system times for the shell and + ttiimmeess Print the accumulated user and system times for the shell and for processes run from the shell. The return status is 0. ttrraapp [--llppPP] [[_a_c_t_i_o_n] _s_i_g_s_p_e_c ...] The _a_c_t_i_o_n is a command that is read and executed when the shell - receives any of the signals _s_i_g_s_p_e_c. If _a_c_t_i_o_n is absent (and + receives any of the signals _s_i_g_s_p_e_c. If _a_c_t_i_o_n is absent (and there is a single _s_i_g_s_p_e_c) or --, each specified _s_i_g_s_p_e_c is reset - to the value it had when the shell was started. If _a_c_t_i_o_n is - the null string the signal specified by each _s_i_g_s_p_e_c is ignored + to the value it had when the shell was started. If _a_c_t_i_o_n is + the null string the signal specified by each _s_i_g_s_p_e_c is ignored by the shell and by the commands it invokes. - If no arguments are supplied, ttrraapp displays the actions associ- + If no arguments are supplied, ttrraapp displays the actions associ- ated with each trapped signal as a set of ttrraapp commands that can - be reused as shell input to restore the current signal disposi- - tions. If --pp is given, and _a_c_t_i_o_n is not present, then ttrraapp - displays the actions associated with each _s_i_g_s_p_e_c or, if none + be reused as shell input to restore the current signal disposi- + tions. If --pp is given, and _a_c_t_i_o_n is not present, then ttrraapp + displays the actions associated with each _s_i_g_s_p_e_c or, if none are supplied, for all trapped signals, as a set of ttrraapp commands - that can be reused as shell input to restore the current signal - dispositions. The --PP option behaves similarly, but displays - only the actions associated with each _s_i_g_s_p_e_c argument. --PP re- - quires at least one _s_i_g_s_p_e_c argument. The --PP or --pp options may - be used in a subshell environment (e.g., command substitution) - and, as long as they are used before ttrraapp is used to change a + that can be reused as shell input to restore the current signal + dispositions. The --PP option behaves similarly, but displays + only the actions associated with each _s_i_g_s_p_e_c argument. --PP re- + quires at least one _s_i_g_s_p_e_c argument. The --PP or --pp options may + be used in a subshell environment (e.g., command substitution) + and, as long as they are used before ttrraapp is used to change a signal's handling, will display the state of its parent's traps. - The --ll option prints a list of signal names and their corre- - sponding numbers. Each _s_i_g_s_p_e_c is either a signal name defined + The --ll option prints a list of signal names and their corre- + sponding numbers. Each _s_i_g_s_p_e_c is either a signal name defined in <_s_i_g_n_a_l_._h>, or a signal number. Signal names are case insen- - sitive and the SSIIGG prefix is optional. If --ll is supplied with + sitive and the SSIIGG prefix is optional. If --ll is supplied with no _s_i_g_s_p_e_c arguments, it prints a list of valid signal names. - If a _s_i_g_s_p_e_c is EEXXIITT (0), _a_c_t_i_o_n is executed on exit from the - shell. If a _s_i_g_s_p_e_c is DDEEBBUUGG, _a_c_t_i_o_n is executed before every - _s_i_m_p_l_e _c_o_m_m_a_n_d, _f_o_r command, _c_a_s_e command, _s_e_l_e_c_t command, (( - arithmetic command, [[ conditional command, arithmetic _f_o_r com- - mand, and before the first command executes in a shell function - (see SSHHEELLLL GGRRAAMMMMAARR above). Refer to the description of the - eexxttddeebbuugg shell option (see sshhoopptt above) for details of its ef- - fect on the DDEEBBUUGG trap. If a _s_i_g_s_p_e_c is RREETTUURRNN, _a_c_t_i_o_n is exe- + If a _s_i_g_s_p_e_c is EEXXIITT (0), _a_c_t_i_o_n is executed on exit from the + shell. If a _s_i_g_s_p_e_c is DDEEBBUUGG, _a_c_t_i_o_n is executed before every + _s_i_m_p_l_e _c_o_m_m_a_n_d, _f_o_r command, _c_a_s_e command, _s_e_l_e_c_t command, (( + arithmetic command, [[ conditional command, arithmetic _f_o_r com- + mand, and before the first command executes in a shell function + (see SSHHEELLLL GGRRAAMMMMAARR above). Refer to the description of the + eexxttddeebbuugg shell option (see sshhoopptt above) for details of its ef- + fect on the DDEEBBUUGG trap. If a _s_i_g_s_p_e_c is RREETTUURRNN, _a_c_t_i_o_n is exe- cuted each time a shell function or a script executed with the .. or ssoouurrccee builtins finishes executing. - If a _s_i_g_s_p_e_c is EERRRR, _a_c_t_i_o_n is executed whenever a pipeline - (which may consist of a single simple command), a list, or a - compound command returns a non-zero exit status, subject to the - following conditions. The EERRRR trap is not executed if the + If a _s_i_g_s_p_e_c is EERRRR, _a_c_t_i_o_n is executed whenever a pipeline + (which may consist of a single simple command), a list, or a + compound command returns a non-zero exit status, subject to the + following conditions. The EERRRR trap is not executed if the failed command is part of the command list immediately following a wwhhiillee or uunnttiill reserved word, part of the test in an _i_f state- - ment, part of a command executed in a &&&& or |||| list except the - command following the final &&&& or ||||, any command in a pipeline - but the last (subject to the state of the ppiippeeffaaiill shell op- - tion), or if the command's return value is being inverted using + ment, part of a command executed in a &&&& or |||| list except the + command following the final &&&& or ||||, any command in a pipeline + but the last (subject to the state of the ppiippeeffaaiill shell op- + tion), or if the command's return value is being inverted using !!. These are the same conditions obeyed by the eerrrreexxiitt (--ee) op- tion. When the shell is not interactive, signals ignored upon entry to the shell cannot be trapped or reset. Interactive shells permit trapping signals ignored on entry. Trapped signals that are not - being ignored are reset to their original values in a subshell - or subshell environment when one is created. The return status + being ignored are reset to their original values in a subshell + or subshell environment when one is created. The return status is false if any _s_i_g_s_p_e_c is invalid; otherwise ttrraapp returns true. ttrruuee Does nothing, returns a 0 status. @@ -7107,61 +7110,61 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS Indicate how each _n_a_m_e would be interpreted if used as a command name. - If the --tt option is used, ttyyppee prints a string which is one of - _a_l_i_a_s, _k_e_y_w_o_r_d, _f_u_n_c_t_i_o_n, _b_u_i_l_t_i_n, or _f_i_l_e if _n_a_m_e is an alias, - shell reserved word, function, builtin, or executable file, re- - spectively. If the _n_a_m_e is not found, ttyyppee prints nothing and + If the --tt option is used, ttyyppee prints a string which is one of + _a_l_i_a_s, _k_e_y_w_o_r_d, _f_u_n_c_t_i_o_n, _b_u_i_l_t_i_n, or _f_i_l_e if _n_a_m_e is an alias, + shell reserved word, function, builtin, or executable file, re- + spectively. If the _n_a_m_e is not found, ttyyppee prints nothing and returns a non-zero exit status. - If the --pp option is used, ttyyppee either returns the pathname of - the executable file that would be found by searching $$PPAATTHH for + If the --pp option is used, ttyyppee either returns the pathname of + the executable file that would be found by searching $$PPAATTHH for _n_a_m_e or nothing if "type -t name" would not return _f_i_l_e. The --PP - option forces a PPAATTHH search for each _n_a_m_e, even if "type -t + option forces a PPAATTHH search for each _n_a_m_e, even if "type -t name" would not return _f_i_l_e. If _n_a_m_e is present in the table of - hashed commands, --pp and --PP print the hashed value, which is not + hashed commands, --pp and --PP print the hashed value, which is not necessarily the file that appears first in PPAATTHH. - If the --aa option is used, ttyyppee prints all of the places that - contain a command named _n_a_m_e. This includes aliases, reserved - words, functions, and builtins, but the path search options (--pp - and --PP) can be supplied to restrict the output to executable - files. ttyyppee does not consult the table of hashed commands when + If the --aa option is used, ttyyppee prints all of the places that + contain a command named _n_a_m_e. This includes aliases, reserved + words, functions, and builtins, but the path search options (--pp + and --PP) can be supplied to restrict the output to executable + files. ttyyppee does not consult the table of hashed commands when using --aa with --pp, and only performs a PPAATTHH search for _n_a_m_e. The --ff option suppresses shell function lookup, as with the ccoomm-- - mmaanndd builtin. ttyyppee returns true if all of the arguments are + mmaanndd builtin. ttyyppee returns true if all of the arguments are found, false if any are not found. uulliimmiitt [--HHSS] --aa uulliimmiitt [--HHSS] [--bbccddeeffiikkllmmnnppqqrrssttuuvvxxPPRRTT [_l_i_m_i_t]] - Provides control over the resources available to the shell and + Provides control over the resources available to the shell and to processes it starts, on systems that allow such control. - The --HH and --SS options specify whether the hard or soft limit is + The --HH and --SS options specify whether the hard or soft limit is set for the given resource. A hard limit cannot be increased by a non-root user once it is set; a soft limit may be increased up - to the value of the hard limit. If neither --HH nor --SS is speci- + to the value of the hard limit. If neither --HH nor --SS is speci- fied, uulliimmiitt sets both the soft and hard limits. The value of _l_i_m_i_t can be a number in the unit specified for the - resource or one of the special values hhaarrdd, ssoofftt, or uunnlliimmiitteedd, - which stand for the current hard limit, the current soft limit, - and no limit, respectively. If _l_i_m_i_t is omitted, uulliimmiitt prints - the current value of the soft limit of the resource, unless the - --HH option is given. When more than one resource is specified, - the limit name and unit, if appropriate, are printed before the + resource or one of the special values hhaarrdd, ssoofftt, or uunnlliimmiitteedd, + which stand for the current hard limit, the current soft limit, + and no limit, respectively. If _l_i_m_i_t is omitted, uulliimmiitt prints + the current value of the soft limit of the resource, unless the + --HH option is given. When more than one resource is specified, + the limit name and unit, if appropriate, are printed before the value. Other options are interpreted as follows: --aa Report all current limits; no limits are set. --bb The maximum socket buffer size. --cc The maximum size of core files created. --dd The maximum size of a process's data segment. --ee The maximum scheduling priority ("nice"). - --ff The maximum size of files written by the shell and its + --ff The maximum size of files written by the shell and its children. --ii The maximum number of pending signals. --kk The maximum number of kqueues that may be allocated. --ll The maximum size that may be locked into memory. - --mm The maximum resident set size (many systems do not honor + --mm The maximum resident set size (many systems do not honor this limit). --nn The maximum number of open file descriptors (most systems do not allow this value to be set). @@ -7170,148 +7173,148 @@ SSHHEELLLL BBUUIILLTTIINN CCOOMMMMAANNDDSS --rr The maximum real-time scheduling priority. --ss The maximum stack size. --tt The maximum amount of cpu time in seconds. - --uu The maximum number of processes available to a single + --uu The maximum number of processes available to a single user. - --vv The maximum amount of virtual memory available to the + --vv The maximum amount of virtual memory available to the shell and, on some systems, to its children. --xx The maximum number of file locks. --PP The maximum number of pseudoterminals. - --RR The maximum time a real-time process can run before + --RR The maximum time a real-time process can run before blocking, in microseconds. --TT The maximum number of threads. - If _l_i_m_i_t is supplied, and the --aa option is not used, _l_i_m_i_t is - the new value of the specified resource. If no option is sup- + If _l_i_m_i_t is supplied, and the --aa option is not used, _l_i_m_i_t is + the new value of the specified resource. If no option is sup- plied, then --ff is assumed. - Values are in 1024-byte increments, except for --tt, which is in - seconds; --RR, which is in microseconds; --pp, which is in units of - 512-byte blocks; --PP, --TT, --bb, --kk, --nn, and --uu, which are unscaled - values; and, when in posix mode, --cc and --ff, which are in - 512-byte increments. The return status is 0 unless an invalid + Values are in 1024-byte increments, except for --tt, which is in + seconds; --RR, which is in microseconds; --pp, which is in units of + 512-byte blocks; --PP, --TT, --bb, --kk, --nn, and --uu, which are unscaled + values; and, when in posix mode, --cc and --ff, which are in + 512-byte increments. The return status is 0 unless an invalid option or argument is supplied, or an error occurs while setting a new limit. uummaasskk [--pp] [--SS] [_m_o_d_e] - Set the user file-creation mask to _m_o_d_e. If _m_o_d_e begins with a + Set the user file-creation mask to _m_o_d_e. If _m_o_d_e begins with a digit, it is interpreted as an octal number; otherwise it is in- - terpreted as a symbolic mode mask similar to that accepted by + terpreted as a symbolic mode mask similar to that accepted by _c_h_m_o_d(1). If _m_o_d_e is omitted, uummaasskk prints the current value of the mask. The --SS option without a _m_o_d_e argument prints the mask in a symbolic format; the default output is an octal number. If the --pp option is supplied, and _m_o_d_e is omitted, the output is in - a form that may be reused as input. The return status is zero - if the mode was successfully changed or if no _m_o_d_e argument was + a form that may be reused as input. The return status is zero + if the mode was successfully changed or if no _m_o_d_e argument was supplied, and non-zero otherwise. uunnaalliiaass [-aa] [_n_a_m_e ...] - Remove each _n_a_m_e from the list of defined aliases. If --aa is - supplied, remove all alias definitions. The return value is + Remove each _n_a_m_e from the list of defined aliases. If --aa is + supplied, remove all alias definitions. The return value is true unless a supplied _n_a_m_e is not a defined alias. uunnsseett [-ffvv] [-nn] [_n_a_m_e ...] - For each _n_a_m_e, remove the corresponding variable or function. + For each _n_a_m_e, remove the corresponding variable or function. If the --vv option is given, each _n_a_m_e refers to a shell variable, - and that variable is removed. If --ff is specified, each _n_a_m_e - refers to a shell function, and the function definition is re- - moved. If the --nn option is supplied, and _n_a_m_e is a variable - with the _n_a_m_e_r_e_f attribute, _n_a_m_e will be unset rather than the - variable it references. --nn has no effect if the --ff option is - supplied. Read-only variables and functions may not be unset. - When variables or functions are removed, they are also removed - from the environment passed to subsequent commands. If no op- - tions are supplied, each _n_a_m_e refers to a variable; if there is - no variable by that name, a function with that name, if any, is - unset. Some shell variables may not be unset. If any of + and that variable is removed. If --ff is specified, each _n_a_m_e + refers to a shell function, and the function definition is re- + moved. If the --nn option is supplied, and _n_a_m_e is a variable + with the _n_a_m_e_r_e_f attribute, _n_a_m_e will be unset rather than the + variable it references. --nn has no effect if the --ff option is + supplied. Read-only variables and functions may not be unset. + When variables or functions are removed, they are also removed + from the environment passed to subsequent commands. If no op- + tions are supplied, each _n_a_m_e refers to a variable; if there is + no variable by that name, a function with that name, if any, is + unset. Some shell variables may not be unset. If any of BBAASSHH__AALLIIAASSEESS, BBAASSHH__AARRGGVV00, BBAASSHH__CCMMDDSS, BBAASSHH__CCOOMMMMAANNDD, BBAASSHH__SSUUBB-- - SSHHEELLLL, BBAASSHHPPIIDD, CCOOMMPP__WWOORRDDBBRREEAAKKSS, DDIIRRSSTTAACCKK, EEPPOOCCHHRREEAALLTTIIMMEE, - EEPPOOCCHHSSEECCOONNDDSS, FFUUNNCCNNAAMMEE, GGRROOUUPPSS, HHIISSTTCCMMDD, LLIINNEENNOO, RRAANNDDOOMM, SSEECC-- - OONNDDSS, or SSRRAANNDDOOMM are unset, they lose their special properties, - even if they are subsequently reset. The exit status is true + SSHHEELLLL, BBAASSHHPPIIDD, CCOOMMPP__WWOORRDDBBRREEAAKKSS, DDIIRRSSTTAACCKK, EEPPOOCCHHRREEAALLTTIIMMEE, + EEPPOOCCHHSSEECCOONNDDSS, FFUUNNCCNNAAMMEE, GGRROOUUPPSS, HHIISSTTCCMMDD, LLIINNEENNOO, RRAANNDDOOMM, SSEECC-- + OONNDDSS, or SSRRAANNDDOOMM are unset, they lose their special properties, + even if they are subsequently reset. The exit status is true unless a _n_a_m_e is readonly or may not be unset. wwaaiitt [--ffnn] [--pp _v_a_r_n_a_m_e] [_i_d ...] Wait for each specified child process _i_d and return the termina- - tion status of the last _i_d. Each _i_d may be a process ID _p_i_d or - a job specification _j_o_b_s_p_e_c; if a jobspec is supplied, wwaaiitt + tion status of the last _i_d. Each _i_d may be a process ID _p_i_d or + a job specification _j_o_b_s_p_e_c; if a jobspec is supplied, wwaaiitt waits for all processes in the job. - If no options or _i_ds are supplied, wwaaiitt waits for all running - background jobs and the last-executed process substitution, if + If no options or _i_ds are supplied, wwaaiitt waits for all running + background jobs and the last-executed process substitution, if its process id is the same as $$!!, and the return status is zero. - If the --nn option is supplied, wwaaiitt waits for any one of the + If the --nn option is supplied, wwaaiitt waits for any one of the given _i_ds or, if no _i_ds are supplied, any job or process substi- tution, to complete and returns its exit status. If none of the - supplied _i_ds is a child of the shell, or if no _i_ds are supplied - and the shell has no unwaited-for children, the exit status is + supplied _i_ds is a child of the shell, or if no _i_ds are supplied + and the shell has no unwaited-for children, the exit status is 127. - If the --pp option is supplied, wwaaiitt assigns the process or job - identifier of the job for which the exit status is returned to - the variable _v_a_r_n_a_m_e named by the option argument. The vari- - able, which cannot be readonly, will be unset initially, before - any assignment. This is useful only when used with the --nn op- + If the --pp option is supplied, wwaaiitt assigns the process or job + identifier of the job for which the exit status is returned to + the variable _v_a_r_n_a_m_e named by the option argument. The vari- + able, which cannot be readonly, will be unset initially, before + any assignment. This is useful only when used with the --nn op- tion. - Supplying the --ff option, when job control is enabled, forces - wwaaiitt to wait for each _i_d to terminate before returning its sta- - tus, instead of returning when it changes status. If there are - no _i_d arguments, wwaaiitt waits until all background processes have + Supplying the --ff option, when job control is enabled, forces + wwaaiitt to wait for each _i_d to terminate before returning its sta- + tus, instead of returning when it changes status. If there are + no _i_d arguments, wwaaiitt waits until all background processes have terminated. - If none of the _i_ds specify one of the shell's active child - processes, the return status is 127. If wwaaiitt is interrupted by - a signal, any _v_a_r_n_a_m_e will remain unset, and the return status - will be greater than 128, as described under SSIIGGNNAALLSS above. + If none of the _i_ds specify one of the shell's active child + processes, the return status is 127. If wwaaiitt is interrupted by + a signal, any _v_a_r_n_a_m_e will remain unset, and the return status + will be greater than 128, as described under SSIIGGNNAALLSS above. Otherwise, the return status is the exit status of the last _i_d. SSHHEELLLL CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE - Bash-4.0 introduced the concept of a _s_h_e_l_l _c_o_m_p_a_t_i_b_i_l_i_t_y _l_e_v_e_l, speci- + Bash-4.0 introduced the concept of a _s_h_e_l_l _c_o_m_p_a_t_i_b_i_l_i_t_y _l_e_v_e_l, speci- fied as a set of options to the shopt builtin (ccoommppaatt3311, ccoommppaatt3322, ccoomm-- - ppaatt4400, ccoommppaatt4411, and so on). There is only one current compatibility + ppaatt4400, ccoommppaatt4411, and so on). There is only one current compatibility level -- each option is mutually exclusive. The compatibility level is - intended to allow users to select behavior from previous versions that - is incompatible with newer versions while they migrate scripts to use - current features and behavior. It's intended to be a temporary solu- + intended to allow users to select behavior from previous versions that + is incompatible with newer versions while they migrate scripts to use + current features and behavior. It's intended to be a temporary solu- tion. - This section does not mention behavior that is standard for a particu- - lar version (e.g., setting ccoommppaatt3322 means that quoting the right hand - side of the regexp matching operator quotes special regexp characters - in the word, which is default behavior in bash-3.2 and subsequent ver- + This section does not mention behavior that is standard for a particu- + lar version (e.g., setting ccoommppaatt3322 means that quoting the right hand + side of the regexp matching operator quotes special regexp characters + in the word, which is default behavior in bash-3.2 and subsequent ver- sions). - If a user enables, say, ccoommppaatt3322, it may affect the behavior of other - compatibility levels up to and including the current compatibility - level. The idea is that each compatibility level controls behavior - that changed in that version of bbaasshh, but that behavior may have been - present in earlier versions. For instance, the change to use locale- - based comparisons with the [[[[ command came in bash-4.1, and earlier + If a user enables, say, ccoommppaatt3322, it may affect the behavior of other + compatibility levels up to and including the current compatibility + level. The idea is that each compatibility level controls behavior + that changed in that version of bbaasshh, but that behavior may have been + present in earlier versions. For instance, the change to use locale- + based comparisons with the [[[[ command came in bash-4.1, and earlier versions used ASCII-based comparisons, so enabling ccoommppaatt3322 will enable - ASCII-based comparisons as well. That granularity may not be suffi- - cient for all uses, and as a result users should employ compatibility - levels carefully. Read the documentation for a particular feature to + ASCII-based comparisons as well. That granularity may not be suffi- + cient for all uses, and as a result users should employ compatibility + levels carefully. Read the documentation for a particular feature to find out the current behavior. - Bash-4.3 introduced a new shell variable: BBAASSHH__CCOOMMPPAATT. The value as- + Bash-4.3 introduced a new shell variable: BBAASSHH__CCOOMMPPAATT. The value as- signed to this variable (a decimal version number like 4.2, or an inte- - ger corresponding to the ccoommppaatt_N_N option, like 42) determines the com- + ger corresponding to the ccoommppaatt_N_N option, like 42) determines the com- patibility level. Starting with bash-4.4, bbaasshh began deprecating older compatibility lev- els. Eventually, the options will be removed in favor of BBAASSHH__CCOOMMPPAATT. - Bash-5.0 was the final version for which there was an individual shopt - option for the previous version. BBAASSHH__CCOOMMPPAATT is the only mechanism to + Bash-5.0 was the final version for which there was an individual shopt + option for the previous version. BBAASSHH__CCOOMMPPAATT is the only mechanism to control the compatibility level in versions newer than bash-5.0. - The following table describes the behavior changes controlled by each + The following table describes the behavior changes controlled by each compatibility level setting. The ccoommppaatt_N_N tag is used as shorthand for setting the compatibility level to _N_N using one of the following mecha- - nisms. For versions prior to bash-5.0, the compatibility level may be - set using the corresponding ccoommppaatt_N_N shopt option. For bash-4.3 and - later versions, the BBAASSHH__CCOOMMPPAATT variable is preferred, and it is re- + nisms. For versions prior to bash-5.0, the compatibility level may be + set using the corresponding ccoommppaatt_N_N shopt option. For bash-4.3 and + later versions, the BBAASSHH__CCOOMMPPAATT variable is preferred, and it is re- quired for bash-5.1 and later versions. ccoommppaatt3311 @@ -7319,173 +7322,173 @@ SSHHEELLLL CCOOMMPPAATTIIBBIILLIITTYY MMOODDEE ator (=~) has no special effect. ccoommppaatt3322 - +o The << and >> operators to the [[[[ command do not consider + +o The << and >> operators to the [[[[ command do not consider the current locale when comparing strings; they use ASCII ordering. ccoommppaatt4400 - +o The << and >> operators to the [[[[ command do not consider + +o The << and >> operators to the [[[[ command do not consider the current locale when comparing strings; they use ASCII ordering. BBaasshh versions prior to bash-4.1 use ASCII col- - lation and _s_t_r_c_m_p(3); bash-4.1 and later use the current + lation and _s_t_r_c_m_p(3); bash-4.1 and later use the current locale's collation sequence and _s_t_r_c_o_l_l(3). ccoommppaatt4411 - +o In posix mode, ttiimmee may be followed by options and still + +o In posix mode, ttiimmee may be followed by options and still be recognized as a reserved word (this is POSIX interpre- tation 267). +o In _p_o_s_i_x mode, the parser requires that an even number of - single quotes occur in the _w_o_r_d portion of a double- - quoted parameter expansion and treats them specially, so - that characters within the single quotes are considered + single quotes occur in the _w_o_r_d portion of a double- + quoted parameter expansion and treats them specially, so + that characters within the single quotes are considered quoted (this is POSIX interpretation 221). ccoommppaatt4422 +o The replacement string in double-quoted pattern substitu- - tion does not undergo quote removal, as it does in ver- + tion does not undergo quote removal, as it does in ver- sions after bash-4.2. - +o In posix mode, single quotes are considered special when - expanding the _w_o_r_d portion of a double-quoted parameter - expansion and can be used to quote a closing brace or - other special character (this is part of POSIX interpre- - tation 221); in later versions, single quotes are not + +o In posix mode, single quotes are considered special when + expanding the _w_o_r_d portion of a double-quoted parameter + expansion and can be used to quote a closing brace or + other special character (this is part of POSIX interpre- + tation 221); in later versions, single quotes are not special within double-quoted word expansions. ccoommppaatt4433 - +o Word expansion errors are considered non-fatal errors - that cause the current command to fail, even in posix - mode (the default behavior is to make them fatal errors + +o Word expansion errors are considered non-fatal errors + that cause the current command to fail, even in posix + mode (the default behavior is to make them fatal errors that cause the shell to exit). - +o When executing a shell function, the loop state + +o When executing a shell function, the loop state (while/until/etc.) is not reset, so bbrreeaakk or ccoonnttiinnuuee in that function will break or continue loops in the calling context. Bash-4.4 and later reset the loop state to pre- vent this. ccoommppaatt4444 - +o The shell sets up the values used by BBAASSHH__AARRGGVV and - BBAASSHH__AARRGGCC so they can expand to the shell's positional - parameters even if extended debugging mode is not en- + +o The shell sets up the values used by BBAASSHH__AARRGGVV and + BBAASSHH__AARRGGCC so they can expand to the shell's positional + parameters even if extended debugging mode is not en- abled. - +o A subshell inherits loops from its parent context, so - bbrreeaakk or ccoonnttiinnuuee will cause the subshell to exit. - Bash-5.0 and later reset the loop state to prevent the + +o A subshell inherits loops from its parent context, so + bbrreeaakk or ccoonnttiinnuuee will cause the subshell to exit. + Bash-5.0 and later reset the loop state to prevent the exit - +o Variable assignments preceding builtins like eexxppoorrtt and + +o Variable assignments preceding builtins like eexxppoorrtt and rreeaaddoonnllyy that set attributes continue to affect variables with the same name in the calling environment even if the shell is not in posix mode. ccoommppaatt5500 - +o Bash-5.1 changed the way $$RRAANNDDOOMM is generated to intro- - duce slightly more randomness. If the shell compatibil- + +o Bash-5.1 changed the way $$RRAANNDDOOMM is generated to intro- + duce slightly more randomness. If the shell compatibil- ity level is set to 50 or lower, it reverts to the method - from bash-5.0 and previous versions, so seeding the ran- - dom number generator by assigning a value to RRAANNDDOOMM will + from bash-5.0 and previous versions, so seeding the ran- + dom number generator by assigning a value to RRAANNDDOOMM will produce the same sequence as in bash-5.0. - +o If the command hash table is empty, bash versions prior - to bash-5.1 printed an informational message to that ef- - fect, even when producing output that can be reused as - input. Bash-5.1 suppresses that message when the --ll op- + +o If the command hash table is empty, bash versions prior + to bash-5.1 printed an informational message to that ef- + fect, even when producing output that can be reused as + input. Bash-5.1 suppresses that message when the --ll op- tion is supplied. ccoommppaatt5511 - +o The uunnsseett builtin treats attempts to unset array sub- - scripts @@ and ** differently depending on whether the ar- - ray is indexed or associative, and differently than in + +o The uunnsseett builtin treats attempts to unset array sub- + scripts @@ and ** differently depending on whether the ar- + ray is indexed or associative, and differently than in previous versions. +o Arithmetic commands ( ((((...)))) ) and the expressions in an arithmetic for statement can be expanded more than once. - +o Expressions used as arguments to arithmetic operators in - the [[[[ conditional command can be expanded more than + +o Expressions used as arguments to arithmetic operators in + the [[[[ conditional command can be expanded more than once. - +o The expressions in substring parameter brace expansion + +o The expressions in substring parameter brace expansion can be expanded more than once. +o The expressions in the $$((((...)))) word expansion can be ex- panded more than once. - +o Arithmetic expressions used as indexed array subscripts + +o Arithmetic expressions used as indexed array subscripts can be expanded more than once. - +o tteesstt --vv, when given an argument of AA[[@@]], where AA is an + +o tteesstt --vv, when given an argument of AA[[@@]], where AA is an existing associative array, will return true if the array - has any set elements. Bash-5.2 will look for and report + has any set elements. Bash-5.2 will look for and report on a key named @@. +o The ${_p_a_r_a_m_e_t_e_r[[::]]==_v_a_l_u_e} word expansion will return - _v_a_l_u_e, before any variable-specific transformations have + _v_a_l_u_e, before any variable-specific transformations have been performed (e.g., converting to lowercase). Bash-5.2 will return the final value assigned to the variable. - +o Parsing command substitutions will behave as if extended + +o Parsing command substitutions will behave as if extended globbing (see the description of the sshhoopptt builtin above) - is enabled, so that parsing a command substitution con- + is enabled, so that parsing a command substitution con- taining an extglob pattern (say, as part of a shell func- - tion) will not fail. This assumes the intent is to en- - able extglob before the command is executed and word ex- - pansions are performed. It will fail at word expansion - time if extglob hasn't been enabled by the time the com- + tion) will not fail. This assumes the intent is to en- + able extglob before the command is executed and word ex- + pansions are performed. It will fail at word expansion + time if extglob hasn't been enabled by the time the com- mand is executed. ccoommppaatt5522 - +o The tteesstt builtin uses its historical algorithm to parse - parenthesized subexpressions when given five or more ar- + +o The tteesstt builtin uses its historical algorithm to parse + parenthesized subexpressions when given five or more ar- guments. - +o If the --pp or --PP option is supplied to the bbiinndd builtin, + +o If the --pp or --PP option is supplied to the bbiinndd builtin, bbiinndd treats any arguments remaining after option process- - ing as bindable command names, and displays any key se- - quences bound to those commands, instead of treating the + ing as bindable command names, and displays any key se- + quences bound to those commands, instead of treating the arguments as key sequences to bind. RREESSTTRRIICCTTEEDD SSHHEELLLL If bbaasshh is started with the name rrbbaasshh, or the --rr option is supplied at - invocation, the shell becomes _r_e_s_t_r_i_c_t_e_d. A restricted shell is used - to set up an environment more controlled than the standard shell. It - behaves identically to bbaasshh with the exception that the following are + invocation, the shell becomes _r_e_s_t_r_i_c_t_e_d. A restricted shell is used + to set up an environment more controlled than the standard shell. It + behaves identically to bbaasshh with the exception that the following are disallowed or not performed: +o Changing directories with ccdd. - +o Setting or unsetting the values of SSHHEELLLL, PPAATTHH, HHIISSTTFFIILLEE, EENNVV, + +o Setting or unsetting the values of SSHHEELLLL, PPAATTHH, HHIISSTTFFIILLEE, EENNVV, or BBAASSHH__EENNVV. +o Specifying command names containing //. - +o Specifying a filename containing a // as an argument to the .. + +o Specifying a filename containing a // as an argument to the .. builtin command. - +o Using the --pp option to the .. builtin command to specify a + +o Using the --pp option to the .. builtin command to specify a search path. - +o Specifying a filename containing a slash as an argument to the + +o Specifying a filename containing a slash as an argument to the hhiissttoorryy builtin command. - +o Specifying a filename containing a slash as an argument to the + +o Specifying a filename containing a slash as an argument to the --pp option to the hhaasshh builtin command. - +o Importing function definitions from the shell environment at + +o Importing function definitions from the shell environment at startup. - +o Parsing the values of BBAASSHHOOPPTTSS and SSHHEELLLLOOPPTTSS from the shell en- + +o Parsing the values of BBAASSHHOOPPTTSS and SSHHEELLLLOOPPTTSS from the shell en- vironment at startup. - +o Redirecting output using the >, >|, <>, >&, &>, and >> redirec- + +o Redirecting output using the >, >|, <>, >&, &>, and >> redirec- tion operators. +o Using the eexxeecc builtin command to replace the shell with another command. - +o Adding or deleting builtin commands with the --ff and --dd options + +o Adding or deleting builtin commands with the --ff and --dd options to the eennaabbllee builtin command. - +o Using the eennaabbllee builtin command to enable disabled shell + +o Using the eennaabbllee builtin command to enable disabled shell builtins. +o Specifying the --pp option to the ccoommmmaanndd builtin command. - +o Turning off restricted mode with sseett ++rr or sshhoopptt --uu rree-- + +o Turning off restricted mode with sseett ++rr or sshhoopptt --uu rree-- ssttrriicctteedd__sshheellll. These restrictions are enforced after any startup files are read. When a command that is found to be a shell script is executed (see CCOOMM-- - MMAANNDD EEXXEECCUUTTIIOONN above), rrbbaasshh turns off any restrictions in the shell + MMAANNDD EEXXEECCUUTTIIOONN above), rrbbaasshh turns off any restrictions in the shell spawned to execute the script. SSEEEE AALLSSOO @@ -7510,10 +7513,10 @@ FFIILLEESS _~_/_._b_a_s_h_r_c The individual per-interactive-shell startup file _~_/_._b_a_s_h___l_o_g_o_u_t - The individual login shell cleanup file, executed when a login + The individual login shell cleanup file, executed when a login shell exits _~_/_._b_a_s_h___h_i_s_t_o_r_y - The default value of HHIISSTTFFIILLEE, the file in which bash saves the + The default value of HHIISSTTFFIILLEE, the file in which bash saves the command history _~_/_._i_n_p_u_t_r_c Individual _r_e_a_d_l_i_n_e initialization file @@ -7525,15 +7528,15 @@ AAUUTTHHOORRSS BBUUGG RREEPPOORRTTSS If you find a bug in bbaasshh, you should report it. But first, you should - make sure that it really is a bug, and that it appears in the latest - version of bbaasshh. The latest version is always available from + make sure that it really is a bug, and that it appears in the latest + version of bbaasshh. The latest version is always available from and . - Once you have determined that a bug actually exists, use the _b_a_s_h_b_u_g - command to submit a bug report. If you have a fix, you are encouraged + Once you have determined that a bug actually exists, use the _b_a_s_h_b_u_g + command to submit a bug report. If you have a fix, you are encouraged to mail that as well! You may send suggestions and "philosophical" bug - reports, as well as comments and bug reports concerning this manual + reports, as well as comments and bug reports concerning this manual page, to to . _A_l_l bug reports should include: @@ -7541,37 +7544,37 @@ BBUUGG RREEPPOORRTTSS +o the version number of bbaasshh ("echo $BASH_VERSION"), +o the host platform and operating system ("uname -a"), +o either - (a) if you or an administrator built and installed bbaasshh from - source, the name and version of the compiler used to build it, + (a) if you or an administrator built and installed bbaasshh from + source, the name and version of the compiler used to build it, as reported by bbaasshh's "configure" script; or - (b) if your site uses a distributor's bbaasshh package, the version of + (b) if your site uses a distributor's bbaasshh package, the version of that package (for example, "dpkg -i bash" or "rpm -qi bash"), +o a description of the behavior bbaasshh exhibited, +o a description of the behavior you expected from bbaasshh, and +o a short shell script or "recipe" exercising the unexpected behavior. - _b_a_s_h_b_u_g inserts the first three items automatically into the template + _b_a_s_h_b_u_g inserts the first three items automatically into the template it provides for filing a bug report. BBUUGGSS It's too big and too slow. - There are some subtle differences between bbaasshh and historical versions - of sshh, due mostly to bbaasshh's independent implementation and the evolu- + There are some subtle differences between bbaasshh and historical versions + of sshh, due mostly to bbaasshh's independent implementation and the evolu- tion of the POSIX specification. Aliases are confusing in some uses. Shell builtin commands and functions are not stoppable/restartable. - Compound commands and command lists of the form "a ; b ; c" are not - handled gracefully when combined with process suspension. When a - process is stopped, the shell immediately executes the next command in - the list or breaks out of any existing loops. It suffices to enclose - the command in parentheses to force it into a subshell, which may be - stopped as a unit, or to start the command in the background and imme- + Compound commands and command lists of the form "a ; b ; c" are not + handled gracefully when combined with process suspension. When a + process is stopped, the shell immediately executes the next command in + the list or breaks out of any existing loops. It suffices to enclose + the command in parentheses to force it into a subshell, which may be + stopped as a unit, or to start the command in the background and imme- diately bring it into the foreground. Array variables may not (yet) be exported. -GNU Bash 5.3 2025 December 2 _B_A_S_H(1) +GNU Bash 5.3 2025 December 18 _B_A_S_H(1) diff --git a/doc/bash.1 b/doc/bash.1 index 4554754e..145717cc 100644 --- a/doc/bash.1 +++ b/doc/bash.1 @@ -5,7 +5,7 @@ .\" Case Western Reserve University .\" chet.ramey@case.edu .\" -.\" Last Change: Tue Dec 2 16:43:36 EST 2025 +.\" Last Change: Thu Dec 18 17:18:21 EST 2025 .\" .\" For bash_builtins, strip all but "SHELL BUILTIN COMMANDS" section .\" For rbash, strip all but "RESTRICTED SHELL" section @@ -22,7 +22,7 @@ .ds zX \" empty .if \n(zZ=1 .ig zZ .if \n(zY=1 .ig zY -.TH BASH 1 "2025 December 2" "GNU Bash 5.3" +.TH BASH 1 "2025 December 18" "GNU Bash 5.3" .\" .ie \n(.g \{\ .ds ' \(aq @@ -10340,7 +10340,7 @@ that is not a function. \fBfalse\fP Does nothing; returns a non-zero status. .TP -\fBfc\fP [\fB\-e\fP \fIename\fP] [\fB\-lnr\fP] [\fIfirst\fP] [\fIlast\fP] +\fBfc\fP [\fB\-e\fP \fIename\fP] [\fB\-D\fP] [\fB\-lnr\fP] [\fIfirst\fP] [\fIlast\fP] .PD 0 .TP \fBfc\fP \fB\-s\fP [\fIpat\fP=\fIrep\fP] [\fIcmd\fP] @@ -10407,6 +10407,13 @@ If neither variable is set, \fBfc\fP uses .FN vi. When editing is complete, \fBfc\fP reads the file containing the edited commands and echoes and executes them. +The +.B \-D +option, if supplied, +causes \fBfc\fP to remove the selected commands from the history +list before executing the file of edited commands. +.B \-D +is only active when \fBfc\fP is invoked in this way. .IP In the second form, \fBfc\fP re-executes \fIcommand\fP after replacing each instance of \fIpat\fP with \fIrep\fP. diff --git a/doc/bash.info b/doc/bash.info index 3143f1c2..b7665149 100644 --- a/doc/bash.info +++ b/doc/bash.info @@ -1,9 +1,9 @@ This is bash.info, produced by makeinfo version 7.2 from bashref.texi. This text is a brief description of the features that are present in the -Bash shell (version 5.3, 2 December 2025). +Bash shell (version 5.3, 18 December 2025). - This is Edition 5.3, last updated 2 December 2025, of ‘The GNU Bash + This is Edition 5.3, last updated 18 December 2025, of ‘The GNU Bash Reference Manual’, for ‘Bash’, Version 5.3. Copyright © 1988-2025 Free Software Foundation, Inc. @@ -26,10 +26,10 @@ Bash Features ************* This text is a brief description of the features that are present in the -Bash shell (version 5.3, 2 December 2025). The Bash home page is +Bash shell (version 5.3, 18 December 2025). The Bash home page is . - This is Edition 5.3, last updated 2 December 2025, of ‘The GNU Bash + This is Edition 5.3, last updated 18 December 2025, of ‘The GNU Bash Reference Manual’, for ‘Bash’, Version 5.3. Bash contains features that appear in other popular shells, and some @@ -10962,7 +10962,7 @@ Bash provides two builtin commands which manipulate the history list and history file. ‘fc’ - fc [-e ENAME] [-lnr] [FIRST] [LAST] + fc [-e ENAME] [-D] [-lnr] [FIRST] [LAST] fc -s [PAT=REP] [COMMAND] The first form selects a range of commands from FIRST to LAST from @@ -10991,7 +10991,12 @@ history file. ‘FCEDIT’ variable if set, or the value of the ‘EDITOR’ variable if that is set, or ‘vi’ if neither is set. When editing is complete, ‘fc’ reads the file of edited commands and echoes and executes - them. + them. The ‘-D’ option, if supplied, causes ‘fc’ to remove the + selected commands from the history list before executing the file + of edited commands. ‘-D’ is only active when ‘fc’ is invoked in + this way. It could be used if you make a typo in a command and + want to fix it using an editor while removing the erroneous command + from the history to avoid clutter. In the second form, ‘fc’ re-executes COMMAND after replacing each instance of PAT in the selected command with REP. COMMAND is @@ -12950,7 +12955,7 @@ D.1 Index of Shell Builtin Commands (line 233) * help: Bash Builtins. (line 375) * history: Bash History Builtins. - (line 59) + (line 64) * jobs: Job Control Builtins. (line 28) * kill: Job Control Builtins. @@ -13676,138 +13681,138 @@ D.5 Concept Index  Tag Table: -Node: Top899 -Node: Introduction2838 -Node: What is Bash?3051 -Node: What is a shell?4184 -Node: Definitions6794 -Node: Basic Shell Features10121 -Node: Shell Syntax11345 -Node: Shell Operation12372 -Node: Quoting13663 -Node: Escape Character15001 -Node: Single Quotes15536 -Node: Double Quotes15885 -Node: ANSI-C Quoting17230 -Node: Locale Translation18624 -Node: Creating Internationalized Scripts20027 -Node: Comments24225 -Node: Shell Commands24992 -Node: Reserved Words25931 -Node: Simple Commands27074 -Node: Pipelines27736 -Node: Lists30992 -Node: Compound Commands32912 -Node: Looping Constructs33921 -Node: Conditional Constructs36470 -Node: Command Grouping51607 -Node: Coprocesses53099 -Node: GNU Parallel55785 -Node: Shell Functions56703 -Node: Shell Parameters65151 -Node: Positional Parameters70052 -Node: Special Parameters71142 -Node: Shell Expansions74603 -Node: Brace Expansion76792 -Node: Tilde Expansion80128 -Node: Shell Parameter Expansion83083 -Node: Command Substitution103730 -Node: Arithmetic Expansion107259 -Node: Process Substitution108435 -Node: Word Splitting109543 -Node: Filename Expansion111987 -Node: Pattern Matching115211 -Node: Quote Removal120977 -Node: Redirections121281 -Node: Executing Commands131537 -Node: Simple Command Expansion132204 -Node: Command Search and Execution134312 -Node: Command Execution Environment136756 -Node: Environment140204 -Node: Exit Status142107 -Node: Signals144166 -Node: Shell Scripts149114 -Node: Shell Builtin Commands152412 -Node: Bourne Shell Builtins154753 -Node: Bash Builtins181472 -Node: Modifying Shell Behavior219208 -Node: The Set Builtin219550 -Node: The Shopt Builtin231544 -Node: Special Builtins248597 -Node: Shell Variables249586 -Node: Bourne Shell Variables250020 -Node: Bash Variables252528 -Node: Bash Features291812 -Node: Invoking Bash292826 -Node: Bash Startup Files299410 -Node: Interactive Shells304652 -Node: What is an Interactive Shell?305060 -Node: Is this Shell Interactive?305722 -Node: Interactive Shell Behavior306546 -Node: Bash Conditional Expressions310307 -Node: Shell Arithmetic315724 -Node: Aliases319051 -Node: Arrays322185 -Node: The Directory Stack329888 -Node: Directory Stack Builtins330685 -Node: Controlling the Prompt335130 -Node: The Restricted Shell338014 -Node: Bash POSIX Mode340896 -Node: Shell Compatibility Mode359843 -Node: Job Control368850 -Node: Job Control Basics369307 -Node: Job Control Builtins375675 -Node: Job Control Variables382463 -Node: Command Line Editing383694 -Node: Introduction and Notation385397 -Node: Readline Interaction387749 -Node: Readline Bare Essentials388937 -Node: Readline Movement Commands390745 -Node: Readline Killing Commands391741 -Node: Readline Arguments393764 -Node: Searching394854 -Node: Readline Init File397097 -Node: Readline Init File Syntax398400 -Node: Conditional Init Constructs425351 -Node: Sample Init File429736 -Node: Bindable Readline Commands432856 -Node: Commands For Moving434394 -Node: Commands For History436858 -Node: Commands For Text442249 -Node: Commands For Killing446374 -Node: Numeric Arguments449162 -Node: Commands For Completion450314 -Node: Keyboard Macros456010 -Node: Miscellaneous Commands456711 -Node: Readline vi Mode463278 -Node: Programmable Completion464255 -Node: Programmable Completion Builtins473991 -Node: A Programmable Completion Example485728 -Node: Using History Interactively491073 -Node: Bash History Facilities491754 -Node: Bash History Builtins495489 -Node: History Interaction501960 -Node: Event Designators506910 -Node: Word Designators508488 -Node: Modifiers510880 -Node: Installing Bash512817 -Node: Basic Installation513933 -Node: Compilers and Options517809 -Node: Compiling For Multiple Architectures518559 -Node: Installation Names520312 -Node: Specifying the System Type522546 -Node: Sharing Defaults523292 -Node: Operation Controls524006 -Node: Optional Features525025 -Node: Reporting Bugs537748 -Node: Major Differences From The Bourne Shell539105 -Node: GNU Free Documentation License560532 -Node: Indexes585709 -Node: Builtin Index586160 -Node: Reserved Word Index593258 -Node: Variable Index595703 -Node: Function Index613116 -Node: Concept Index627111 +Node: Top901 +Node: Introduction2842 +Node: What is Bash?3055 +Node: What is a shell?4188 +Node: Definitions6798 +Node: Basic Shell Features10125 +Node: Shell Syntax11349 +Node: Shell Operation12376 +Node: Quoting13667 +Node: Escape Character15005 +Node: Single Quotes15540 +Node: Double Quotes15889 +Node: ANSI-C Quoting17234 +Node: Locale Translation18628 +Node: Creating Internationalized Scripts20031 +Node: Comments24229 +Node: Shell Commands24996 +Node: Reserved Words25935 +Node: Simple Commands27078 +Node: Pipelines27740 +Node: Lists30996 +Node: Compound Commands32916 +Node: Looping Constructs33925 +Node: Conditional Constructs36474 +Node: Command Grouping51611 +Node: Coprocesses53103 +Node: GNU Parallel55789 +Node: Shell Functions56707 +Node: Shell Parameters65155 +Node: Positional Parameters70056 +Node: Special Parameters71146 +Node: Shell Expansions74607 +Node: Brace Expansion76796 +Node: Tilde Expansion80132 +Node: Shell Parameter Expansion83087 +Node: Command Substitution103734 +Node: Arithmetic Expansion107263 +Node: Process Substitution108439 +Node: Word Splitting109547 +Node: Filename Expansion111991 +Node: Pattern Matching115215 +Node: Quote Removal120981 +Node: Redirections121285 +Node: Executing Commands131541 +Node: Simple Command Expansion132208 +Node: Command Search and Execution134316 +Node: Command Execution Environment136760 +Node: Environment140208 +Node: Exit Status142111 +Node: Signals144170 +Node: Shell Scripts149118 +Node: Shell Builtin Commands152416 +Node: Bourne Shell Builtins154757 +Node: Bash Builtins181476 +Node: Modifying Shell Behavior219212 +Node: The Set Builtin219554 +Node: The Shopt Builtin231548 +Node: Special Builtins248601 +Node: Shell Variables249590 +Node: Bourne Shell Variables250024 +Node: Bash Variables252532 +Node: Bash Features291816 +Node: Invoking Bash292830 +Node: Bash Startup Files299414 +Node: Interactive Shells304656 +Node: What is an Interactive Shell?305064 +Node: Is this Shell Interactive?305726 +Node: Interactive Shell Behavior306550 +Node: Bash Conditional Expressions310311 +Node: Shell Arithmetic315728 +Node: Aliases319055 +Node: Arrays322189 +Node: The Directory Stack329892 +Node: Directory Stack Builtins330689 +Node: Controlling the Prompt335134 +Node: The Restricted Shell338018 +Node: Bash POSIX Mode340900 +Node: Shell Compatibility Mode359847 +Node: Job Control368854 +Node: Job Control Basics369311 +Node: Job Control Builtins375679 +Node: Job Control Variables382467 +Node: Command Line Editing383698 +Node: Introduction and Notation385401 +Node: Readline Interaction387753 +Node: Readline Bare Essentials388941 +Node: Readline Movement Commands390749 +Node: Readline Killing Commands391745 +Node: Readline Arguments393768 +Node: Searching394858 +Node: Readline Init File397101 +Node: Readline Init File Syntax398404 +Node: Conditional Init Constructs425355 +Node: Sample Init File429740 +Node: Bindable Readline Commands432860 +Node: Commands For Moving434398 +Node: Commands For History436862 +Node: Commands For Text442253 +Node: Commands For Killing446378 +Node: Numeric Arguments449166 +Node: Commands For Completion450318 +Node: Keyboard Macros456014 +Node: Miscellaneous Commands456715 +Node: Readline vi Mode463282 +Node: Programmable Completion464259 +Node: Programmable Completion Builtins473995 +Node: A Programmable Completion Example485732 +Node: Using History Interactively491077 +Node: Bash History Facilities491758 +Node: Bash History Builtins495493 +Node: History Interaction502365 +Node: Event Designators507315 +Node: Word Designators508893 +Node: Modifiers511285 +Node: Installing Bash513222 +Node: Basic Installation514338 +Node: Compilers and Options518214 +Node: Compiling For Multiple Architectures518964 +Node: Installation Names520717 +Node: Specifying the System Type522951 +Node: Sharing Defaults523697 +Node: Operation Controls524411 +Node: Optional Features525430 +Node: Reporting Bugs538153 +Node: Major Differences From The Bourne Shell539510 +Node: GNU Free Documentation License560937 +Node: Indexes586114 +Node: Builtin Index586565 +Node: Reserved Word Index593663 +Node: Variable Index596108 +Node: Function Index613521 +Node: Concept Index627516  End Tag Table diff --git a/doc/bashref.info b/doc/bashref.info index 8fb48027..b59f6544 100644 --- a/doc/bashref.info +++ b/doc/bashref.info @@ -2,9 +2,9 @@ This is bashref.info, produced by makeinfo version 7.2 from bashref.texi. This text is a brief description of the features that are present in the -Bash shell (version 5.3, 2 December 2025). +Bash shell (version 5.3, 18 December 2025). - This is Edition 5.3, last updated 2 December 2025, of ‘The GNU Bash + This is Edition 5.3, last updated 18 December 2025, of ‘The GNU Bash Reference Manual’, for ‘Bash’, Version 5.3. Copyright © 1988-2025 Free Software Foundation, Inc. @@ -27,10 +27,10 @@ Bash Features ************* This text is a brief description of the features that are present in the -Bash shell (version 5.3, 2 December 2025). The Bash home page is +Bash shell (version 5.3, 18 December 2025). The Bash home page is . - This is Edition 5.3, last updated 2 December 2025, of ‘The GNU Bash + This is Edition 5.3, last updated 18 December 2025, of ‘The GNU Bash Reference Manual’, for ‘Bash’, Version 5.3. Bash contains features that appear in other popular shells, and some @@ -10963,7 +10963,7 @@ Bash provides two builtin commands which manipulate the history list and history file. ‘fc’ - fc [-e ENAME] [-lnr] [FIRST] [LAST] + fc [-e ENAME] [-D] [-lnr] [FIRST] [LAST] fc -s [PAT=REP] [COMMAND] The first form selects a range of commands from FIRST to LAST from @@ -10992,7 +10992,12 @@ history file. ‘FCEDIT’ variable if set, or the value of the ‘EDITOR’ variable if that is set, or ‘vi’ if neither is set. When editing is complete, ‘fc’ reads the file of edited commands and echoes and executes - them. + them. The ‘-D’ option, if supplied, causes ‘fc’ to remove the + selected commands from the history list before executing the file + of edited commands. ‘-D’ is only active when ‘fc’ is invoked in + this way. It could be used if you make a typo in a command and + want to fix it using an editor while removing the erroneous command + from the history to avoid clutter. In the second form, ‘fc’ re-executes COMMAND after replacing each instance of PAT in the selected command with REP. COMMAND is @@ -12951,7 +12956,7 @@ D.1 Index of Shell Builtin Commands (line 233) * help: Bash Builtins. (line 375) * history: Bash History Builtins. - (line 59) + (line 64) * jobs: Job Control Builtins. (line 28) * kill: Job Control Builtins. @@ -13677,138 +13682,138 @@ D.5 Concept Index  Tag Table: -Node: Top902 -Node: Introduction2844 -Node: What is Bash?3060 -Node: What is a shell?4196 -Node: Definitions6809 -Node: Basic Shell Features10139 -Node: Shell Syntax11366 -Node: Shell Operation12396 -Node: Quoting13690 -Node: Escape Character15031 -Node: Single Quotes15569 -Node: Double Quotes15921 -Node: ANSI-C Quoting17269 -Node: Locale Translation18666 -Node: Creating Internationalized Scripts20072 -Node: Comments24273 -Node: Shell Commands25043 -Node: Reserved Words25985 -Node: Simple Commands27131 -Node: Pipelines27796 -Node: Lists31055 -Node: Compound Commands32978 -Node: Looping Constructs33990 -Node: Conditional Constructs36542 -Node: Command Grouping51682 -Node: Coprocesses53177 -Node: GNU Parallel55866 -Node: Shell Functions56787 -Node: Shell Parameters65238 -Node: Positional Parameters70142 -Node: Special Parameters71235 -Node: Shell Expansions74699 -Node: Brace Expansion76891 -Node: Tilde Expansion80230 -Node: Shell Parameter Expansion83188 -Node: Command Substitution103838 -Node: Arithmetic Expansion107370 -Node: Process Substitution108549 -Node: Word Splitting109660 -Node: Filename Expansion112107 -Node: Pattern Matching115334 -Node: Quote Removal121103 -Node: Redirections121410 -Node: Executing Commands131669 -Node: Simple Command Expansion132339 -Node: Command Search and Execution134450 -Node: Command Execution Environment136897 -Node: Environment140348 -Node: Exit Status142254 -Node: Signals144316 -Node: Shell Scripts149267 -Node: Shell Builtin Commands152568 -Node: Bourne Shell Builtins154912 -Node: Bash Builtins181634 -Node: Modifying Shell Behavior219373 -Node: The Set Builtin219718 -Node: The Shopt Builtin231715 -Node: Special Builtins248771 -Node: Shell Variables249763 -Node: Bourne Shell Variables250200 -Node: Bash Variables252711 -Node: Bash Features291998 -Node: Invoking Bash293015 -Node: Bash Startup Files299602 -Node: Interactive Shells304847 -Node: What is an Interactive Shell?305258 -Node: Is this Shell Interactive?305923 -Node: Interactive Shell Behavior306750 -Node: Bash Conditional Expressions310514 -Node: Shell Arithmetic315934 -Node: Aliases319264 -Node: Arrays322401 -Node: The Directory Stack330107 -Node: Directory Stack Builtins330907 -Node: Controlling the Prompt335355 -Node: The Restricted Shell338242 -Node: Bash POSIX Mode341127 -Node: Shell Compatibility Mode360077 -Node: Job Control369087 -Node: Job Control Basics369547 -Node: Job Control Builtins375918 -Node: Job Control Variables382709 -Node: Command Line Editing383943 -Node: Introduction and Notation385649 -Node: Readline Interaction388004 -Node: Readline Bare Essentials389195 -Node: Readline Movement Commands391006 -Node: Readline Killing Commands392005 -Node: Readline Arguments394031 -Node: Searching395124 -Node: Readline Init File397370 -Node: Readline Init File Syntax398676 -Node: Conditional Init Constructs425630 -Node: Sample Init File430018 -Node: Bindable Readline Commands433141 -Node: Commands For Moving434682 -Node: Commands For History437149 -Node: Commands For Text442543 -Node: Commands For Killing446671 -Node: Numeric Arguments449462 -Node: Commands For Completion450617 -Node: Keyboard Macros456316 -Node: Miscellaneous Commands457020 -Node: Readline vi Mode463590 -Node: Programmable Completion464570 -Node: Programmable Completion Builtins474309 -Node: A Programmable Completion Example486049 -Node: Using History Interactively491397 -Node: Bash History Facilities492081 -Node: Bash History Builtins495819 -Node: History Interaction502293 -Node: Event Designators507246 -Node: Word Designators508827 -Node: Modifiers511222 -Node: Installing Bash513162 -Node: Basic Installation514281 -Node: Compilers and Options518160 -Node: Compiling For Multiple Architectures518913 -Node: Installation Names520669 -Node: Specifying the System Type522906 -Node: Sharing Defaults523655 -Node: Operation Controls524372 -Node: Optional Features525394 -Node: Reporting Bugs538120 -Node: Major Differences From The Bourne Shell539480 -Node: GNU Free Documentation License560910 -Node: Indexes586090 -Node: Builtin Index586544 -Node: Reserved Word Index593645 -Node: Variable Index596093 -Node: Function Index613509 -Node: Concept Index627507 +Node: Top904 +Node: Introduction2848 +Node: What is Bash?3064 +Node: What is a shell?4200 +Node: Definitions6813 +Node: Basic Shell Features10143 +Node: Shell Syntax11370 +Node: Shell Operation12400 +Node: Quoting13694 +Node: Escape Character15035 +Node: Single Quotes15573 +Node: Double Quotes15925 +Node: ANSI-C Quoting17273 +Node: Locale Translation18670 +Node: Creating Internationalized Scripts20076 +Node: Comments24277 +Node: Shell Commands25047 +Node: Reserved Words25989 +Node: Simple Commands27135 +Node: Pipelines27800 +Node: Lists31059 +Node: Compound Commands32982 +Node: Looping Constructs33994 +Node: Conditional Constructs36546 +Node: Command Grouping51686 +Node: Coprocesses53181 +Node: GNU Parallel55870 +Node: Shell Functions56791 +Node: Shell Parameters65242 +Node: Positional Parameters70146 +Node: Special Parameters71239 +Node: Shell Expansions74703 +Node: Brace Expansion76895 +Node: Tilde Expansion80234 +Node: Shell Parameter Expansion83192 +Node: Command Substitution103842 +Node: Arithmetic Expansion107374 +Node: Process Substitution108553 +Node: Word Splitting109664 +Node: Filename Expansion112111 +Node: Pattern Matching115338 +Node: Quote Removal121107 +Node: Redirections121414 +Node: Executing Commands131673 +Node: Simple Command Expansion132343 +Node: Command Search and Execution134454 +Node: Command Execution Environment136901 +Node: Environment140352 +Node: Exit Status142258 +Node: Signals144320 +Node: Shell Scripts149271 +Node: Shell Builtin Commands152572 +Node: Bourne Shell Builtins154916 +Node: Bash Builtins181638 +Node: Modifying Shell Behavior219377 +Node: The Set Builtin219722 +Node: The Shopt Builtin231719 +Node: Special Builtins248775 +Node: Shell Variables249767 +Node: Bourne Shell Variables250204 +Node: Bash Variables252715 +Node: Bash Features292002 +Node: Invoking Bash293019 +Node: Bash Startup Files299606 +Node: Interactive Shells304851 +Node: What is an Interactive Shell?305262 +Node: Is this Shell Interactive?305927 +Node: Interactive Shell Behavior306754 +Node: Bash Conditional Expressions310518 +Node: Shell Arithmetic315938 +Node: Aliases319268 +Node: Arrays322405 +Node: The Directory Stack330111 +Node: Directory Stack Builtins330911 +Node: Controlling the Prompt335359 +Node: The Restricted Shell338246 +Node: Bash POSIX Mode341131 +Node: Shell Compatibility Mode360081 +Node: Job Control369091 +Node: Job Control Basics369551 +Node: Job Control Builtins375922 +Node: Job Control Variables382713 +Node: Command Line Editing383947 +Node: Introduction and Notation385653 +Node: Readline Interaction388008 +Node: Readline Bare Essentials389199 +Node: Readline Movement Commands391010 +Node: Readline Killing Commands392009 +Node: Readline Arguments394035 +Node: Searching395128 +Node: Readline Init File397374 +Node: Readline Init File Syntax398680 +Node: Conditional Init Constructs425634 +Node: Sample Init File430022 +Node: Bindable Readline Commands433145 +Node: Commands For Moving434686 +Node: Commands For History437153 +Node: Commands For Text442547 +Node: Commands For Killing446675 +Node: Numeric Arguments449466 +Node: Commands For Completion450621 +Node: Keyboard Macros456320 +Node: Miscellaneous Commands457024 +Node: Readline vi Mode463594 +Node: Programmable Completion464574 +Node: Programmable Completion Builtins474313 +Node: A Programmable Completion Example486053 +Node: Using History Interactively491401 +Node: Bash History Facilities492085 +Node: Bash History Builtins495823 +Node: History Interaction502698 +Node: Event Designators507651 +Node: Word Designators509232 +Node: Modifiers511627 +Node: Installing Bash513567 +Node: Basic Installation514686 +Node: Compilers and Options518565 +Node: Compiling For Multiple Architectures519318 +Node: Installation Names521074 +Node: Specifying the System Type523311 +Node: Sharing Defaults524060 +Node: Operation Controls524777 +Node: Optional Features525799 +Node: Reporting Bugs538525 +Node: Major Differences From The Bourne Shell539885 +Node: GNU Free Documentation License561315 +Node: Indexes586495 +Node: Builtin Index586949 +Node: Reserved Word Index594050 +Node: Variable Index596498 +Node: Function Index613914 +Node: Concept Index627912  End Tag Table diff --git a/doc/version.texi b/doc/version.texi index 2ecc2f5f..85bc5f8d 100644 --- a/doc/version.texi +++ b/doc/version.texi @@ -2,10 +2,10 @@ Copyright (C) 1988-2025 Free Software Foundation, Inc. @end ignore -@set LASTCHANGE Tue Dec 2 16:47:35 EST 2025 +@set LASTCHANGE Thu Dec 18 17:25:09 EST 2025 @set EDITION 5.3 @set VERSION 5.3 -@set UPDATED 2 December 2025 +@set UPDATED 18 December 2025 @set UPDATED-MONTH December 2025 diff --git a/eval.c b/eval.c index 9e0c278e..13334457 100644 --- a/eval.c +++ b/eval.c @@ -114,6 +114,7 @@ reader_loop (void) alone. */ if (last_command_exit_value == 0) set_exit_status (EXECUTION_FAILURE); + case REINIT: if (subshell_environment) { current_command = (COMMAND *)NULL; diff --git a/lib/readline/doc/hsuser.texi b/lib/readline/doc/hsuser.texi index 5bce1c3d..e94b76d9 100644 --- a/lib/readline/doc/hsuser.texi +++ b/lib/readline/doc/hsuser.texi @@ -154,7 +154,7 @@ history list and history file. @item fc @btindex fc @example -@code{fc [-e @var{ename}] [-lnr] [@var{first}] [@var{last}]} +@code{fc [-e @var{ename}] [-D] [-lnr] [@var{first}] [@var{last}]} @code{fc -s [@var{pat}=@var{rep}] [@var{command}]} @end example @@ -191,6 +191,13 @@ value of the @env{FCEDIT} variable if set, or the value of the @env{EDITOR} variable if that is set, or @code{vi} if neither is set. When editing is complete, @code{fc} reads the file of edited commands and echoes and executes them. +The @option{-D} option, if supplied, +causes @code{fc} to remove the selected commands from the history +list before executing the file of edited commands. +@option{-D} is only active when @code{fc} is invoked in this way. +It could be used if you make a typo in a command and want to fix it using +an editor while removing the erroneous command from the history to +avoid clutter. In the second form, @code{fc} re-executes @var{command} after replacing each instance of @var{pat} in the selected command with @var{rep}. diff --git a/shell.c b/shell.c index 6ea54fde..92b115e1 100644 --- a/shell.c +++ b/shell.c @@ -1397,6 +1397,7 @@ run_wordexp (char *words) case EXITBLTIN: return last_command_exit_value; case DISCARD: + case REINIT: return last_command_exit_value = 1; default: command_error ("run_wordexp", CMDERR_BADJUMP, code, 0); @@ -1475,6 +1476,7 @@ run_one_command (char *command) case EXITBLTIN: return last_command_exit_value; case DISCARD: + case REINIT: return last_command_exit_value = 1; default: command_error ("run_one_command", CMDERR_BADJUMP, code, 0); diff --git a/tests/builtins.right b/tests/builtins.right index d7fcd38f..606e6774 100644 --- a/tests/builtins.right +++ b/tests/builtins.right @@ -394,7 +394,7 @@ A star (*) next to a name means that the command is disabled. exit [n] typeset [-aAfFgiIlnrtux] name[=value> export [-fn] [name[=value] ...] or ex> ulimit [-SHabcdefiklmnpqrstuvxPRT] [> false umask [-p] [-S] [mode] - fc [-e ename] [-lnr] [first] [last] o> unalias [-a] name [name ...] + fc [-e ename] [-D] [-lnr] [first] [la> unalias [-a] name [name ...] fg [job_spec] unset [-f] [-v] [-n] [name ...] for NAME [in WORDS ... ] ; do COMMAND> until COMMANDS; do COMMANDS-2; done for (( exp1; exp2; exp3 )); do COMMAN> variables - Names and meanings of so> @@ -487,7 +487,7 @@ A star (*) next to a name means that the command is disabled. exit [n] typeset [-aAfFgiIlnrtux] name[=value> export [-fn] [name[=value] ...] or ex> ulimit [-SHabcdefiklmnpqrstuvxPRT] [> false umask [-p] [-S] [mode] - fc [-e ename] [-lnr] [first] [last] o> unalias [-a] name [name ...] + fc [-e ename] [-D] [-lnr] [first] [la> unalias [-a] name [name ...] fg [job_spec] unset [-f] [-v] [-n] [name ...] for NAME [in WORDS ... ] ; do COMMAND> until COMMANDS; do COMMANDS-2; done for (( exp1; exp2; exp3 )); do COMMAN> variables - Names and meanings of so> diff --git a/tests/history.right b/tests/history.right index 7c12f3e1..54ed23b0 100644 --- a/tests/history.right +++ b/tests/history.right @@ -2,7 +2,7 @@ history: usage: history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg [arg...] ./history.tests: line 21: history: cannot use more than one of -anrw ./history.tests: line 24: fc: -v: invalid option -fc: usage: fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command] +fc: usage: fc [-e ename] [-D] [-lnr] [first] [last] or fc -s [pat=rep] [command] 1 for i in one two three; do echo $i; done 2 /bin/sh -c 'echo this is $0' 3 ls