From: Ivan T. Ivanov <iivanov@suse.de>
Date: Thu, 28 Aug 2025 13:17:14 +0000 (+0200)
Subject: arm64: dts: broadcom: bcm2712: Add UARTA controller node
X-Git-Tag: v6.18-rc1~147^2~39^2~7
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=72323b141691beeab8809c1dc0b98b1bcf058d88;p=thirdparty%2Flinux.git

arm64: dts: broadcom: bcm2712: Add UARTA controller node

On RPi5 device Bluetooth chips is connected to UARTA
port. Add Bluetooth chips and related pin definitions.

With this and firmware already provided by distributions,
at least on openSUSE Tumbleweed, this is sufficient to make
Bluetooth operational on RPi5 \o/.

Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/35c0da6a741019efefc3c8e405e210a3a8156830.1756386531.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
index 411b58c1dddfc..04738bf281ebd 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -81,6 +81,11 @@
 };
 
 &pinctrl {
+	bt_shutdown_default: bt-shutdown-default-state {
+		function = "gpio";
+		pins = "gpio29";
+	};
+
 	emmc_sd_default: emmc-sd-default-state {
 		pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
 		bias-pull-up;
@@ -110,6 +115,29 @@
 		};
 	};
 
+	uarta_24_default: uarta-24-default-state {
+		rts-pins {
+			function = "uart0";
+			pins = "gpio24";
+			bias-disable;
+		};
+		cts-pins {
+			function = "uart0";
+			pins = "gpio25";
+			bias-pull-up;
+		};
+		txd-pins {
+			function = "uart0";
+			pins = "gpio26";
+			bias-disable;
+		};
+		rxd-pins {
+			function = "uart0";
+			pins = "gpio27";
+			bias-pull-up;
+		};
+	};
+
 	wl_on_default: wl-on-default-state {
 		function = "gpio";
 		pins = "gpio28";
@@ -188,6 +216,20 @@
 	};
 };
 
+/* uarta communicates with the BT module */
+&uarta {
+	uart-has-rtscts;
+	pinctrl-0 = <&uarta_24_default &bt_shutdown_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &hvs {
 	clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
 	clock-names = "core", "disp";
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 6068cb75ef5aa..e77a66adc22ae 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -38,6 +38,13 @@
 			clock-frequency = <200000000>;
 			clock-output-names = "emmc2-clock";
 		};
+
+		clk_sw_baud: clk-sw-baud {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <96000000>;
+			clock-output-names = "sw-baud";
+		};
 	};
 
 	cpus: cpus {
@@ -260,6 +267,17 @@
 			brcm,gpio-bank-widths = <32 22>;
 		};
 
+		uarta: serial@7d50c000 {
+			compatible = "brcm,bcm7271-uart";
+			reg = <0x7d50c000 0x20>;
+			reg-names = "uart";
+			clocks = <&clk_sw_baud>;
+			clock-names = "sw_baud";
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart";
+			status = "disabled";
+		};
+
 		pinctrl_aon: pinctrl@7d510700 {
 			compatible = "brcm,bcm2712c0-aon-pinctrl";
 			reg = <0x7d510700 0x20>;