From: Varshini Rajendran Date: Mon, 8 Sep 2025 04:14:18 +0000 (+0530) Subject: spi: atmel-quadspi: add padcalib, 2xgclk, and dllon capabilities X-Git-Tag: v6.18-rc1~165^2~4^2~2 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=86d074921e34db6daaa7ea2976b1dfe7d507309b;p=thirdparty%2Fkernel%2Flinux.git spi: atmel-quadspi: add padcalib, 2xgclk, and dllon capabilities Introduce capability flags for SoC-specific variations of the QuadSPI controller: - has_padcalib: controller supports pad calibration - has_2xgclk: requires GCLK at half the data rate (2x clocking) - has_dllon: controller supports DLL clock Set `has_padcalib` for Octal controllers that provide pad calibration support. Use `has_2xgclk` for controllers that require the GCLK to run at twice the data rate. Differentiate SoC integration variants with the `has_dllon` flag and set it as needed. Signed-off-by: Varshini Rajendran Signed-off-by: Dharma Balasubiramani Link: https://patch.msgid.link/20250908-microchip-qspi-v2-3-8f3d69fdd5c9@microchip.com Signed-off-by: Mark Brown --- diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 4e9bfd26aa80b..83cea5faff783 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -262,6 +262,9 @@ struct atmel_qspi_caps { bool has_ricr; bool octal; bool has_dma; + bool has_2xgclk; + bool has_padcalib; + bool has_dllon; }; struct atmel_qspi_ops; @@ -1027,13 +1030,25 @@ static int atmel_qspi_set_pad_calibration(struct atmel_qspi *aq) aq, QSPI_PCALCFG); /* DLL On + start calibration. */ - atmel_qspi_write(QSPI_CR_DLLON | QSPI_CR_STPCAL, aq, QSPI_CR); + if (aq->caps->has_dllon) + atmel_qspi_write(QSPI_CR_DLLON | QSPI_CR_STPCAL, aq, QSPI_CR); + /* If there is no DLL support only start calibration. */ + else + atmel_qspi_write(QSPI_CR_STPCAL, aq, QSPI_CR); - /* Check synchronization status before updating configuration. */ - ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, - (val & QSPI_SR2_DLOCK) && - !(val & QSPI_SR2_CALBSY), 40, - ATMEL_QSPI_TIMEOUT); + /* + * Check DLL clock lock and synchronization status before updating + * configuration. + */ + if (aq->caps->has_dllon) + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + (val & QSPI_SR2_DLOCK) && + !(val & QSPI_SR2_CALBSY), 40, + ATMEL_QSPI_TIMEOUT); + else + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_CALBSY), 40, + ATMEL_QSPI_TIMEOUT); /* Refresh analogic blocks every 1 ms.*/ atmel_qspi_write(FIELD_PREP(QSPI_REFRESH_DELAY_COUNTER, @@ -1049,23 +1064,28 @@ static int atmel_qspi_set_gclk(struct atmel_qspi *aq) int ret; /* Disable DLL before setting GCLK */ - status = atmel_qspi_read(aq, QSPI_SR2); - if (status & QSPI_SR2_DLOCK) { - atmel_qspi_write(QSPI_CR_DLLOFF, aq, QSPI_CR); + if (aq->caps->has_dllon) { + status = atmel_qspi_read(aq, QSPI_SR2); + if (status & QSPI_SR2_DLOCK) { + atmel_qspi_write(QSPI_CR_DLLOFF, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_DLOCK), 40, + ATMEL_QSPI_TIMEOUT); + if (ret) + return ret; + } - ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, - !(val & QSPI_SR2_DLOCK), 40, - ATMEL_QSPI_TIMEOUT); - if (ret) - return ret; + if (aq->target_max_speed_hz > QSPI_DLLCFG_THRESHOLD_FREQ) + atmel_qspi_write(QSPI_DLLCFG_RANGE, aq, QSPI_DLLCFG); + else + atmel_qspi_write(0, aq, QSPI_DLLCFG); } - if (aq->target_max_speed_hz > QSPI_DLLCFG_THRESHOLD_FREQ) - atmel_qspi_write(QSPI_DLLCFG_RANGE, aq, QSPI_DLLCFG); + if (aq->caps->has_2xgclk) + ret = clk_set_rate(aq->gclk, 2 * aq->target_max_speed_hz); else - atmel_qspi_write(0, aq, QSPI_DLLCFG); + ret = clk_set_rate(aq->gclk, aq->target_max_speed_hz); - ret = clk_set_rate(aq->gclk, aq->target_max_speed_hz); if (ret) { dev_err(&aq->pdev->dev, "Failed to set generic clock rate.\n"); return ret; @@ -1088,11 +1108,16 @@ static int atmel_qspi_sama7g5_init(struct atmel_qspi *aq) if (ret) return ret; - if (aq->caps->octal) { + /* + * Check if the SoC supports pad calibration in Octal SPI mode. + * Proceed only if both the capabilities are true. + */ + if (aq->caps->octal && aq->caps->has_padcalib) { ret = atmel_qspi_set_pad_calibration(aq); if (ret) return ret; - } else { + /* Start DLL on only if the SoC supports the same */ + } else if (aq->caps->has_dllon) { atmel_qspi_write(QSPI_CR_DLLON, aq, QSPI_CR); ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, (val & QSPI_SR2_DLOCK), 40, @@ -1458,19 +1483,19 @@ static int atmel_qspi_sama7g5_suspend(struct atmel_qspi *aq) clk_disable_unprepare(aq->gclk); - atmel_qspi_write(QSPI_CR_DLLOFF, aq, QSPI_CR); - ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, - !(val & QSPI_SR2_DLOCK), 40, - ATMEL_QSPI_TIMEOUT); - if (ret) - return ret; - - ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, - !(val & QSPI_SR2_CALBSY), 40, - ATMEL_QSPI_TIMEOUT); - if (ret) - return ret; + if (aq->caps->has_dllon) { + atmel_qspi_write(QSPI_CR_DLLOFF, aq, QSPI_CR); + ret = readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_DLOCK), 40, + ATMEL_QSPI_TIMEOUT); + if (ret) + return ret; + } + if (aq->caps->has_padcalib) + return readl_poll_timeout(aq->regs + QSPI_SR2, val, + !(val & QSPI_SR2_CALBSY), 40, + ATMEL_QSPI_TIMEOUT); return 0; } @@ -1607,12 +1632,15 @@ static const struct atmel_qspi_caps atmel_sama7g5_ospi_caps = { .has_gclk = true, .octal = true, .has_dma = true, + .has_padcalib = true, + .has_dllon = true, }; static const struct atmel_qspi_caps atmel_sama7g5_qspi_caps = { .max_speed_hz = SAMA7G5_QSPI1_SDR_MAX_SPEED_HZ, .has_gclk = true, .has_dma = true, + .has_dllon = true, }; static const struct of_device_id atmel_qspi_dt_ids[] = {