From: Álvaro Fernández Rojas <noltari@gmail.com>
Date: Fri, 6 Mar 2026 12:29:55 +0000 (+0100)
Subject: net: sfp: improve Huawei MA5671a fixup
X-Git-Tag: v7.0-rc4~37^2~30
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=87d126852158467ab87d5cbc36ccfd3f15464a6c;p=thirdparty%2Fkernel%2Flinux.git

net: sfp: improve Huawei MA5671a fixup

With the current sfp_fixup_ignore_tx_fault() fixup we ignore the TX_FAULT
signal, but we also need to apply sfp_fixup_ignore_los() in order to be
able to communicate with the module even if the fiber isn't connected for
configuration purposes.
This is needed for all the MA5671a firmwares, excluding the FS modded
firmware.

Fixes: 2069624dac19 ("net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260306125139.213637-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index f4bf53da3d4f..5db841377199 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -367,6 +367,12 @@ static void sfp_fixup_ignore_tx_fault(struct sfp *sfp)
 	sfp->state_ignore_mask |= SFP_F_TX_FAULT;
 }
 
+static void sfp_fixup_ignore_tx_fault_and_los(struct sfp *sfp)
+{
+	sfp_fixup_ignore_tx_fault(sfp);
+	sfp_fixup_ignore_los(sfp);
+}
+
 static void sfp_fixup_ignore_hw(struct sfp *sfp, unsigned int mask)
 {
 	sfp->state_hw_mask &= ~mask;
@@ -530,7 +536,7 @@ static const struct sfp_quirk sfp_quirks[] = {
 	// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in
 	// their EEPROM
 	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
-		  sfp_fixup_ignore_tx_fault),
+		  sfp_fixup_ignore_tx_fault_and_los),
 
 	// Lantech 8330-262D-E and 8330-265D can operate at 2500base-X, but
 	// incorrectly report 2500MBd NRZ in their EEPROM.