From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Date: Sat, 11 Feb 2017 13:17:07 +0000 (+0530)
Subject: devicetree: ccf: Correct USB bus and ref clock nodes
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=91fb7a067d9a2bc0beefc634e1051f14d17d42b2;p=thirdparty%2Fu-boot.git

devicetree: ccf: Correct USB bus and ref clock nodes

Usb "bus_clk" & "ref_clk" nodes are wrongly mapped.
This patch fixes the USB0/1 bus and ref clock nodes and fixes
the error shown below

[ 39.216536] xhci-hcd xhci-hcd.0.auto: Stopped the command ring failed, maybe the host is dead
[ 39.241437] xhci-hcd xhci-hcd.0.auto: Abort command ring failed
[ 39.247391] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up

This patch corrects the changes on commit "5410386d9b6c7c91892a4961c998bf1bc54e795e"

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/dts/zynqmp-clk-ccf.dtsi b/arch/arm/dts/zynqmp-clk-ccf.dtsi
index 123b986ffd1..c4501961347 100644
--- a/arch/arm/dts/zynqmp-clk-ccf.dtsi
+++ b/arch/arm/dts/zynqmp-clk-ccf.dtsi
@@ -234,11 +234,11 @@
 };
 
 &usb0 {
-	clocks = <&clkc 33>,  <&clkc 31>;
+	clocks = <&clkc 32>,  <&clkc 34>;
 };
 
 &usb1 {
-	clocks = <&clkc 33>,  <&clkc 32>;
+	clocks = <&clkc 33>,  <&clkc 34>;
 };
 
 &watchdog0 {
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index e957d8abb6d..416f8848d85 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -954,7 +954,6 @@
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
 			clock-names = "bus_clk", "ref_clk";
-			clocks = <&clk125>, <&clk125>;
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x860>;
 			power-domains = <&pd_usb0>;
@@ -977,7 +976,6 @@
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dwc3";
 			clock-names = "bus_clk", "ref_clk";
-			clocks = <&clk125>, <&clk125>;
 			#stream-id-cells = <1>;
 			iommus = <&smmu 0x861>;
 			power-domains = <&pd_usb1>;