From: Alvaro Gamez Machado Date: Thu, 6 Nov 2025 13:45:35 +0000 (+0100) Subject: spi: xilinx: increase number of retries before declaring stall X-Git-Tag: v6.18-rc6~18^2~1 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=939edfaa10f1d22e6af6a84bf4bd96dc49c67302;p=thirdparty%2Flinux.git spi: xilinx: increase number of retries before declaring stall SPI devices using a (relative) slow frequency need a larger time. For instance, microblaze running at 83.25MHz and performing a 3 bytes transaction using a 10MHz/16 = 625kHz needed this stall value increased to at least 20. The SPI device is quite slow, but also is the microblaze, so set this value to 32 to give it even more margin. Signed-off-by: Alvaro Gamez Machado Reviewed-by: Ricardo Ribalda Link: https://patch.msgid.link/20251106134545.31942-1-alvaro.gamez@hazent.com Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index d59cc8a18484..c86dc56f38b4 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -300,7 +300,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) /* Read out all the data from the Rx FIFO */ rx_words = n_words; - stalled = 10; + stalled = 32; while (rx_words) { if (rx_words == n_words && !(stalled--) && !(sr & XSPI_SR_TX_EMPTY_MASK) &&