From: James Clark Date: Thu, 28 Aug 2025 10:14:46 +0000 (+0100) Subject: spi: spi-fsl-lpspi: Treat prescale_max == 0 as no erratum X-Git-Tag: v6.17-rc5~10^2~1^2~2 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=9bbfb1ec959ce95f91cfab544f705e5257be3be1;p=thirdparty%2Flinux.git spi: spi-fsl-lpspi: Treat prescale_max == 0 as no erratum This erratum only ever results in a max value of 1, otherwise the full 3 bits are available. To avoid repeating the same default prescale value for every new device's devdata, treat 0 as no limit (7) and only set a value when the erratum is present. Change the field to be 3 bits to catch out of range definitions. No functionality change. Signed-off-by: James Clark Reviewed-by: Frank Li Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-7-6262b9aa9be4@linaro.org Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index f16449cf42bb9..ea25e8dab0a40 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -86,7 +86,7 @@ #define SR_CLEAR_MASK GENMASK(13, 8) struct fsl_lpspi_devtype_data { - u8 prescale_max; + u8 prescale_max : 3; /* 0 == no limit */ }; struct lpspi_config { @@ -132,15 +132,15 @@ struct fsl_lpspi_data { }; /* - * ERR051608 fixed or not: - * https://www.nxp.com/docs/en/errata/i.MX93_1P87f.pdf + * Devices with ERR051608 have a max TCR_PRESCALE value of 1, otherwise there is + * no prescale limit: https://www.nxp.com/docs/en/errata/i.MX93_1P87f.pdf */ static const struct fsl_lpspi_devtype_data imx93_lpspi_devtype_data = { .prescale_max = 1, }; static const struct fsl_lpspi_devtype_data imx7ulp_lpspi_devtype_data = { - .prescale_max = 7, + /* All defaults */ }; static const struct of_device_id fsl_lpspi_dt_ids[] = { @@ -324,7 +324,7 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi) int scldiv; perclk_rate = clk_get_rate(fsl_lpspi->clk_per); - prescale_max = fsl_lpspi->devtype_data->prescale_max; + prescale_max = fsl_lpspi->devtype_data->prescale_max ?: 7; if (!config.speed_hz) { dev_err(fsl_lpspi->dev,