From: Bartosz Golaszewski Date: Thu, 30 Apr 2026 12:57:19 +0000 (+0200) Subject: ARM: pxa: spitz: attach software nodes to their target GPIO controllers X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=a25463c14d9b803c8308a222d5f8ac1c55098b3c;p=thirdparty%2Fkernel%2Flinux.git ARM: pxa: spitz: attach software nodes to their target GPIO controllers Software nodes describing the GPIO controllers for the spitz platform are currently "dangling" - they're not actually attached to the relevant controllers and don't allow real fwnode lookup. Attach them either by directly assigning them to the struct device or by using the i2c board info struct. Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260430-pxa-gpio-swnodes-v3-2-5142e95f0eca@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 3284b9f62be97..5091b601c4e1b 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -204,11 +204,15 @@ static struct platform_device spitz_scoop_2_device = { static void __init spitz_scoop_init(void) { + spitz_scoop_1_device.dev.fwnode = software_node_fwnode(&spitz_scoop_1_gpiochip_node); platform_device_register(&spitz_scoop_1_device); /* Akita doesn't have the second SCOOP chip */ - if (!machine_is_akita()) + if (!machine_is_akita()) { + spitz_scoop_2_device.dev.fwnode = software_node_fwnode( + &spitz_scoop_2_gpiochip_node); platform_device_register(&spitz_scoop_2_device); + } } /* Power control is shared with between one of the CF slots and SD */ @@ -988,6 +992,7 @@ static struct i2c_board_info spitz_i2c_devs[] = { .type = "max7310", .addr = 0x18, .platform_data = &akita_pca953x_pdata, + .swnode = &akita_max7310_gpiochip_node, }, };