From: Stefano Radaelli <stefano.r@variscite.com>
Date: Thu, 19 Mar 2026 18:40:31 +0000 (+0100)
Subject: arm64: dts: imx8mm-var-som-symphony: Enable PCIe
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=b06c76fcd88c4c3f7ec2dc88c368d1fd2770ad91;p=thirdparty%2Fkernel%2Fstable.git

arm64: dts: imx8mm-var-som-symphony: Enable PCIe

Enable PCIe support on the VAR-SOM Symphony carrier board by adding the
external reference clock, configuring the PHY and providing the required
clock and reset properties.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index fbad5d2d4a97..857325ef4461 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mm-var-som.dtsi"
 #include "imx8mm-var-som-wifi-bt-iw61x.dtsi"
 
@@ -17,6 +18,12 @@
 		stdout-path = &uart4;
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -198,6 +205,29 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	fsl,clkreq-unsupported;
+	status = "okay";
+};
+
+&pcie0 {
+	reset-gpio = <&pca6408 1 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
 /* Header */
 &uart1 {
 	pinctrl-names = "default";