From: E Shattow Date: Wed, 3 Sep 2025 10:13:36 +0000 (-0700) Subject: riscv: dts: starfive: jh7110-common: drop mmc post-power-on-delay-ms X-Git-Tag: v6.18-rc1~147^2^2~11 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=b5a861a438d1a456952665cf6167969f01209479;p=thirdparty%2Flinux.git riscv: dts: starfive: jh7110-common: drop mmc post-power-on-delay-ms Drop post-power-on-delay-ms from mmc0 mmc1 interfaces. There is no known reason for these properties to continue, testing appears to be fine without them [1]. 1: https://lore.kernel.org/lkml/NT0PR01MB1312E0D9EE9F158A57B77700E63D2@NT0PR01MB1312.CHNPR01.prod.partner.outlook.cn/ Signed-off-by: E Shattow Tested-by: Hal Feng Signed-off-by: Conor Dooley --- diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index 4fa77ffd54e30..5dc15e48b74b1 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -285,7 +285,6 @@ mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-hw-reset; - post-power-on-delay-ms = <200>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <&vcc_3v3>; @@ -302,7 +301,6 @@ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; disable-wp; cap-sd-highspeed; - post-power-on-delay-ms = <200>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; status = "okay";