From: Stephan Gerhold Date: Mon, 15 Sep 2025 10:06:14 +0000 (+0200) Subject: arm64: dts: qcom: x1-el2: Disable IRIS for now X-Git-Tag: v6.18-rc1~147^2~5^2~37 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=c0f045e303e014cec5d883edf82fe5de74769944;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: qcom: x1-el2: Disable IRIS for now The reset and IOMMU management for remoteprocs like IRIS is implemented in the hypervisor for older targets such as X1E [1]. When booting Linux/KVM directly in EL2, this functionality is missing and the PAS interface normally used by IRIS to boot the video firmware is not working. The Venus driver supports starting the video firmware without using the PAS interface. The same code also works for X1E when using KVM. However, for the new IRIS dt-bindings it was decided to avoid using the dummy "video-firmware" node in the device tree to describe the IOMMU [2]. Discussion is still ongoing how to describe this properly [3]. To avoid regressions when running using KVM, add a TODO in x1-el2.dtso for now and disable IRIS even when it was enabled by the board. [1]: https://resources.linaro.org/en/resource/sF8jXifdb9V1mUefdbfafa [2]: https://lore.kernel.org/r/20250823155349.22344-2-krzysztof.kozlowski@linaro.org/ [3]: https://lore.kernel.org/r/20250819165447.4149674-12-mukesh.ojha@oss.qualcomm.com/ Signed-off-by: Stephan Gerhold Reviewed-by: Bryan O'Donoghue Link: https://lore.kernel.org/r/20250915-x1e-iris-dt-v2-3-1f928de08fd4@linaro.org Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/x1-el2.dtso b/arch/arm64/boot/dts/qcom/x1-el2.dtso index 380441deca65d..2d1c9151cf1b4 100644 --- a/arch/arm64/boot/dts/qcom/x1-el2.dtso +++ b/arch/arm64/boot/dts/qcom/x1-el2.dtso @@ -12,6 +12,11 @@ status = "disabled"; }; +&iris { + /* TODO: Add video-firmware iommus to start IRIS from EL2 */ + status = "disabled"; +}; + /* * When running under Gunyah, this IOMMU is controlled by the firmware, * however when we take ownership of it in EL2, we need to configure