From: Shenwei Wang Date: Tue, 24 Mar 2026 19:21:29 +0000 (-0500) Subject: gpio: mxc: map Both Edge pad wakeup to Rising Edge X-Git-Tag: v7.0-rc7~20^2~2 X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=c720fb57d56274213d027b3c5ab99080cf62a306;p=thirdparty%2Fkernel%2Flinux.git gpio: mxc: map Both Edge pad wakeup to Rising Edge Suspend may fail on i.MX8QM when Falling Edge is used as a pad wakeup trigger due to a hardware bug in the detection logic. Since the hardware does not support Both Edge wakeup, remap requests for Both Edge to Rising Edge by default to avoid hitting this issue. A warning is emitted when Falling Edge is selected on i.MX8QM. Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms") cc: stable@vger.kernel.org Reviewed-by: Peng Fan Signed-off-by: Shenwei Wang Link: https://patch.msgid.link/20260324192129.2797237-1-shenwei.wang@nxp.com Signed-off-by: Bartosz Golaszewski --- diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index d7666fe9dbf8..647b6f4861b7 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -584,12 +584,13 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable) unsigned long config; bool ret = false; int i, type; + bool is_imx8qm = of_device_is_compatible(port->dev->of_node, "fsl,imx8qm-gpio"); static const u32 pad_type_map[] = { IMX_SCU_WAKEUP_OFF, /* 0 */ IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_RISING */ IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_FALLING */ - IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_BOTH */ + IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_BOTH */ IMX_SCU_WAKEUP_HIGH_LVL, /* IRQ_TYPE_LEVEL_HIGH */ IMX_SCU_WAKEUP_OFF, /* 5 */ IMX_SCU_WAKEUP_OFF, /* 6 */ @@ -604,6 +605,13 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable) config = pad_type_map[type]; else config = IMX_SCU_WAKEUP_OFF; + + if (is_imx8qm && config == IMX_SCU_WAKEUP_FALL_EDGE) { + dev_warn_once(port->dev, + "No falling-edge support for wakeup on i.MX8QM\n"); + config = IMX_SCU_WAKEUP_OFF; + } + ret |= mxc_gpio_generic_config(port, i, config); } }