From: João Paulo Gonçalves <joao.goncalves@toradex.com>
Date: Tue, 14 Oct 2025 12:56:43 +0000 (-0300)
Subject: arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
X-Git-Tag: v6.18-rc7~26^2~7^2~2
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=ec4daace64a44b53df76f0629e82684ef09ce869;p=thirdparty%2Flinux.git

arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred

The gpio0_mipi_csi DT nodes are enabled by default, but they are
dependent on the irqsteer_csi nodes, which are not enabled. This causes
the gpio0_mipi_csi GPIOs to be probe deferred. Since these GPIOs can be
used independently of the CSI controller, enable irqsteer_csi by default
too to prevent them from being deferred and to ensure they work out of
the box.

Fixes: 2217f8243714 ("arm64: dts: imx8: add capture controller for i.MX8's img subsystem")
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index 2cf0f7208350a..a72b2f1c4a1b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -67,7 +67,6 @@ img_subsys: bus@58000000 {
 		power-domains = <&pd IMX_SC_R_CSI_0>;
 		fsl,channel = <0>;
 		fsl,num-irqs = <32>;
-		status = "disabled";
 	};
 
 	gpio0_mipi_csi0: gpio@58222000 {
@@ -144,7 +143,6 @@ img_subsys: bus@58000000 {
 		power-domains = <&pd IMX_SC_R_CSI_1>;
 		fsl,channel = <0>;
 		fsl,num-irqs = <32>;
-		status = "disabled";
 	};
 
 	gpio0_mipi_csi1: gpio@58242000 {