From: Hang Zhou <929513338@qq.com>
Date: Sun, 16 Nov 2025 14:08:35 +0000 (+1100)
Subject: spi: bcm63xx: fix premature CS deassertion on RX-only transactions
X-Git-Tag: v6.18~4^2~5
X-Git-Url: http://git.ipfire.org/gitweb.cgi?a=commitdiff_plain;h=fd9862f726aedbc2f29a29916cabed7bcf5cadb6;p=thirdparty%2Flinux.git

spi: bcm63xx: fix premature CS deassertion on RX-only transactions

On BCM6358 (and also observed on BCM6368) the controller appears to
only generate as many SPI clocks as bytes that have been written into
the TX FIFO. For RX-only transfers the driver programs the transfer
length in SPI_MSG_CTL but does not write anything into the FIFO, so
chip select is deasserted early and the RX transfer segment is never
fully clocked in.

A concrete failing case is a three-transfer MAC address read from
SPI-NOR:
  - TX 0x03 (read command)
  - TX 3-byte address
  - RX 6 bytes (MAC)

In contrast, a two-transfer JEDEC-ID read (0x9f + 6-byte RX) works
because the driver uses prepend_len and writes dummy bytes into the
TX FIFO for the RX part.

Fix this by writing 0xff dummy bytes into the TX FIFO for RX-only
segments so that the number of bytes written to the FIFO matches the
total message length seen by the controller.

Fixes: b17de076062a ("spi/bcm63xx: work around inability to keep CS up")

Signed-off-by: Hang Zhou <929513338@qq.com>
Link: https://patch.msgid.link/tencent_7AC88FCB3076489A4A7E6C2163DF1ACF8D06@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index b56210734caaf..2e3c62f12bef9 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -247,6 +247,20 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
 
 		if (t->rx_buf) {
 			do_rx = true;
+
+			/*
+			 * In certain hardware implementations, there appears to be a
+			 * hidden accumulator that tracks the number of bytes written into
+			 * the hardware FIFO, and this accumulator overrides the length in
+			 * the SPI_MSG_CTL register.
+			 *
+			 * Therefore, for read-only transfers, we need to write some dummy
+			 * value into the FIFO to keep the accumulator tracking the correct
+			 * length.
+			 */
+			if (!t->tx_buf)
+				memset_io(bs->tx_io + len, 0xFF, t->len);
+
 			/* prepend is half-duplex write only */
 			if (t == first)
 				prepend_len = 0;