Using DA monitors tracepoints with KASAN enabled triggers the following
warning:
BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
Read of size 32 at addr ffffffffaada8980 by task ...
Call Trace:
<TASK>
[...]
do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10
? trace_event_sncid+0x83/0x200
trace_event_sncid+0x163/0x200
[...]
The buggy address belongs to the variable:
automaton_snep+0x4e0/0x5e0
This is caused by the tracepoints reading 32 bytes __array instead of
__string from the automata definition. Such strings are literals and
reading 32 bytes ends up in out of bound memory accesses (e.g. the next
automaton's data in this case).
The error is harmless as, while printing the string, we stop at the null
terminator, but it should still be fixed.
Use the __string facilities while defining the tracepoints to avoid
reading out of bound memory.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20250728135022.255578-4-gmonaco@redhat.com Fixes: 792575348ff7 ("rv/include: Add deterministic automata monitor definition via C macros") Reviewed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
RV event tracepoints print a line with the format:
"event_xyz: S0 x event -> S1 "
"event_xyz: S1 x event -> S0 (final)"
While printing an event leading to a non-final state, the line
has a trailing white space (visible above before the closing ").
Adapt the format string not to print the trailing whitespace if we are
not printing "(final)".
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20250728135022.255578-3-gmonaco@redhat.com Reviewed-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 7f904ff6e58d ("rv: Use strings in da monitors tracepoints") Signed-off-by: Sasha Levin <sashal@kernel.org>
The Smnpm extension requires special handling because the guest ISA
extension maps to a different extension (Ssnpm) on the host side.
commit 1851e7836212 ("RISC-V: KVM: Allow Smnpm and Ssnpm extensions for
guests") missed that the vcpu->arch.isa bit is based only on the host
extension, so currently both KVM_RISCV_ISA_EXT_{SMNPM,SSNPM} map to
vcpu->arch.isa[RISCV_ISA_EXT_SSNPM]. This does not cause any problems
for the guest, because both extensions are force-enabled anyway when the
host supports Ssnpm, but prevents checking for (guest) Smnpm in the SBI
FWFT logic.
Redefine kvm_isa_ext_arr to look up the guest extension, since only the
guest -> host mapping is unambiguous. Factor out the logic for checking
for host support of an extension, so this special case only needs to be
handled in one place, and be explicit about which variables hold a host
vs a guest ISA extension.
Fixes: 1851e7836212 ("RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20250111004702.2813013-2-samuel.holland@sifive.com Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the ARM64 BPF JIT when prog->aux->exception_boundary is set for a BPF
program, find_used_callee_regs() is not called because for a program
acting as exception boundary, all callee saved registers are saved.
find_used_callee_regs() sets `ctx->fp_used = true;` when it sees FP
being used in any of the instructions.
For programs acting as exception boundary, ctx->fp_used remains false
even if frame pointer is used by the program and therefore, FP is not
set-up for such programs in the prologue. This can cause the kernel to
crash due to a pagefault.
Fix it by setting ctx->fp_used = true for exception boundary programs as
fp is always saved in such programs.
rt->fib6_nsiblings can be read locklessly, add corresponding
READ_ONCE() and WRITE_ONCE() annotations.
Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250725140725.3626540-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fib6_info_uses_dev() seems to rely on RCU without an explicit
protection.
Like the prior fix in rt6_nlmsg_size(),
we need to make sure fib6_del_route() or fib6_add_rt2node()
have not removed the anchor from the list, or we risk an infinite loop.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250725140725.3626540-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is because fib6_del_route() and fib6_add_rt2node()
uses list_del_rcu(), which can confuse rcu readers,
because they might no longer see the head of the list.
Restart the loop if f6i->fib6_nsiblings is zero.
Fixes: d9ccb18f83ea ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250725140725.3626540-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
inet6_rt_notify() can be called under RCU protection only.
This means the route could be changed concurrently
and rt6_fill_node() could return -EMSGSIZE.
Re-size the skb when this happens and retry, removing
one WARN_ON() that syzbot was able to trigger:
Fixes: 169fd62799e8 ("ipv6: Get rid of RTNL for SIOCADDRT and RTM_NEWROUTE.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://patch.msgid.link/20250725140725.3626540-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.
There is no break time in the while() loop, so every time at the end of
igb_xmit_zc(), negative overflow of nb_pkts will occur, which renders
the return value always false. But theoretically, the result should be
set after calling xsk_tx_peek_release_desc_batch(). We can take
i40e_xmit_zc() as a good example.
Returning false means we're not done with transmission and we need one
more poll, which is exactly what igb_xmit_zc() always did before this
patch. After this patch, the return value depends on the nb_pkts value.
Two cases might happen then:
1. if (nb_pkts < budget), it means we process all the possible data, so
return true and no more necessary poll will be triggered because of
this.
2. if (nb_pkts == budget), it means we might have more data, so return
false to let another poll run again.
Fixes: f8e284a02afc ("igb: Add AF_XDP zero-copy Tx support") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20250723142327.85187-3-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A negative overflow can happen when the budget number of descs are
consumed. as long as the budget is decreased to zero, it will again go
into while (budget-- > 0) statement and get decreased by one, so the
overflow issue can happen. It will lead to returning true whereas the
expected value should be false.
In this case where all the budget is used up, it means zc function
should return false to let the poll run again because normally we
might have more data to process. Without this patch, zc function would
return true instead.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20250723142327.85187-2-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When KSZ8863 support was first added to KSZ driver the RX drop MIB
counter was somehow defined as 0x105. The TX drop MIB counter
starts at 0x100 for port 1, 0x101 for port 2, and 0x102 for port 3, so
the RX drop MIB counter should start at 0x103 for port 1, 0x104 for
port 2, and 0x105 for port 3.
There are 5 ports for KSZ8895, so its RX drop MIB counter starts at
0x105.
Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250723030403.56878-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Which is similar to recent syzkaller reports in [0] and [1] and triggers
because macsec does not advertise IFF_UNICAST_FLT although it has proper
ndo_set_rx_mode callback that takes care of pushing uc/mc addresses
down to the real device.
In general, dev_uc_add call path is problematic for stacking
non-IFF_UNICAST_FLT because we might grab netdev instance lock under
addr_list_lock spinlock, so this is not a systemic fix.
mlx5e_reporter_rx_timeout() is currently invoked synchronously
in the driver's open error flow. This causes the thread holding
priv->state_lock to attempt acquiring the devlink lock, which
can result in a circular dependency with other devlink operations.
For example:
- Devlink health diagnose flow:
- __devlink_nl_pre_doit() acquires the devlink lock.
- devlink_nl_health_reporter_diagnose_doit() invokes the
driver's diagnose callback.
- mlx5e_rx_reporter_diagnose() then attempts to acquire
priv->state_lock.
- Driver open flow:
- mlx5e_open() acquires priv->state_lock.
- If an error occurs, devlink_health_reporter may be called,
attempting to acquire the devlink lock.
To prevent this circular locking scenario, defer the RX timeout
recovery by scheduling it via a workqueue. This ensures that the
recovery work acquires locks in a consistent order: first the
devlink lock, then priv->state_lock.
Additionally, make the recovery work acquire the netdev instance
lock to safely synchronize with the open/close channel flows,
similar to mlx5e_tx_timeout_work. Repeatedly attempt to acquire
the netdev instance lock until it is taken or the target RQ is no
longer active, as indicated by the MLX5E_STATE_CHANNELS_ACTIVE bit.
Fixes: 32c57fb26863 ("net/mlx5e: Report and recover from rx timeout") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1753256672-337784-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Hardware returns a unique identifier for a decrypted packet's xfrm
state, this state is looked up in an xarray. However, the state might
have been freed by the time of this lookup.
Currently, if the state is not found, only a counter is incremented.
The secpath (sp) extension on the skb is not removed, resulting in
sp->len becoming 0.
Subsequently, functions like __xfrm_policy_check() attempt to access
fields such as xfrm_input_state(skb)->xso.type (which dereferences
sp->xvec[sp->len - 1]) without first validating sp->len. This leads to
a crash when dereferencing an invalid state pointer.
This patch prevents the crash by explicitly removing the secpath
extension from the skb if the xfrm state is not found after hardware
decryption. This ensures downstream functions do not operate on a
zero-length secpath.
When updating the PBMC register, we read its current value,
modify desired fields, then write it back.
The port_buffer_size field within PBMC is Read-Only (RO).
If this RO field contains a non-zero value when read,
attempting to write it back will cause the entire PBMC
register update to fail.
This commit ensures port_buffer_size is explicitly cleared
to zero after reading the PBMC register but before writing
back the modified value.
This allows updates to other fields in the PBMC register to succeed.
Although setup_ns() set net.ipv4.conf.default.rp_filter=0,
loading certain module such as ipip will automatically create a tunl0 interface
in all netns including new created ones. In the script, this is before than
default.rp_filter=0 applied, as a result tunl0.rp_filter remains set to 1
which causes the test report FAIL when ipip module is preloaded.
Before fix:
Testing DR mode...
Testing NAT mode...
Testing Tunnel mode...
ipvs.sh: FAIL
After fix:
Testing DR mode...
Testing NAT mode...
Testing Tunnel mode...
ipvs.sh: PASS
Fixes: 7c8b89ec506e ("selftests: netfilter: remove rp_filter configuration") Signed-off-by: Yi Chen <yiche@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Assign netdev.dev_port based on the device channel index, to indicate the
port number of the network device.
While this driver already uses netdev.dev_id for that purpose, dev_port is
more appropriate. However, retain dev_id to avoid potential regressions.
Fixes: 3e66d0138c05 ("can: populate netdev::dev_id for udev discrimination") Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://patch.msgid.link/20250725123452.41-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
tscan1 depends on ISA. It also has a hidden dependency on HAS_IOPORT
as reported by the kernel test bot [1]. That dependency is implied by
ISA which explains why this was not an issue so far.
Add both COMPILE_TEST and HAS_IOPORT to the dependency list so that
this driver can also be built on other platforms.
The latest firmware versions of USB CAN FD interfaces export the EP numbers
to be used to dialog with the device via the "type" field of a response to
a vendor request structure, particularly when its value is greater than or
equal to 2.
Correct the driver's test of this field.
Fixes: 4f232482467a ("can: peak_usb: include support for a new MCU") Signed-off-by: Stephane Grosjean <stephane.grosjean@hms-networks.com> Link: https://patch.msgid.link/20250724081550.11694-1-stephane.grosjean@free.fr Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The non-tunneled tso6 test case was showing up as:
ok 8 tso.ipv4
This is because of the way test_builder() uses the inner_ipver arg in
test naming, and how test_info is iterated over in main(). Given that
some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or
ipv6 as the inner network protocol, I think the best fix here is to
call test_builder() in separate branches for tunneled and non-tunneled
tests, and to make supported inner l3 types an explicit attribute of
tunnel test cases.
# Detected qstat for LSO wire-packets
TAP version 13
1..14
ok 1 tso.ipv4
# Testing with mangleid enabled
ok 2 tso.vxlan4_ipv4
ok 3 tso.vxlan4_ipv6
# Testing with mangleid enabled
ok 4 tso.vxlan_csum4_ipv4
ok 5 tso.vxlan_csum4_ipv6
# Testing with mangleid enabled
ok 6 tso.gre4_ipv4
ok 7 tso.gre4_ipv6
ok 8 tso.ipv6
# Testing with mangleid enabled
ok 9 tso.vxlan6_ipv4
ok 10 tso.vxlan6_ipv6
# Testing with mangleid enabled
ok 11 tso.vxlan_csum6_ipv4
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre6_ipv4
ok 14 tso.gre6_ipv6
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250723184740.4075410-4-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When vxlan is used with ipv6 as the outer network header, the correct
ip link parameters for acheiving the SKB_GSO_UDP_TUNNEL gso type is
"udp6zerocsumtx udp6zerocsumrx". Otherwise the gso type will be
SKB_GSO_UDP_TUNNEL_CSUM.
This bug was the reason for the second of the three possible
invocations of run_one_stream() invocations, so that can be deleted as
well. We only need to test with the feature off and on.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250723184740.4075410-3-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
tso.py uses the active features at the time of test execution
as the set of available gso features to test. This means if a gso
feature is supported but toggled off at test start, the test will be
skipped with a "Device does not support {feature}" message.
Instead, we can enumerate the set of toggleable features by capturing
the driver's hw_features bitmap. To avoid configuration side-effects
from running the test, we also snapshot the wanted_features flag set
before making any feature changes, and then attempt to restore the
same set of wanted_features before test exit.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test") Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20250723184740.4075410-2-daniel.zahka@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the userspace RV tool skips trace events triggered by the RV
tool itself, this can be changed by passing the parameter -s, which sets
the variable config_my_pid to 0 (instead of the tool's PID).
This has the side effect of skipping events generated by idle (PID 0).
Set config_my_pid to -1 (an invalid pid) to avoid skipping idle.
Cc: Nam Cao <namcao@linutronix.de> Cc: Tomas Glozar <tglozar@redhat.com> Cc: Juri Lelli <jlelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Link: https://lore.kernel.org/20250723161240.194860-2-gmonaco@redhat.com Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface") Signed-off-by: Gabriele Monaco <gmonaco@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e385a ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list.
Fixes: f96da09473b52 ("bpf: simplify narrower ctx access") Fixes: 0df1a55afa832 ("bpf: Warn on internal verifier errors") Reported-by: syzbot+0ef84a7bdf5301d4cbec@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0ef84a7bdf5301d4cbec Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://patch.msgid.link/3b8dcee67ff4296903351a974ddd9c4dca768b64.1753194596.git.paul.chaignon@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The Event_Type field in an LE Extended Advertising Report uses bits 5
and 6 for data status (e.g. truncation or fragmentation), not the PDU
type itself.
The ext_evt_type_to_legacy() function fails to mask these status bits
before evaluation. This causes valid advertisements with status bits set
(e.g. a truncated non-connectable advertisement, which ends up showing
as PDU type 0x40) to be misclassified as unknown and subsequently
dropped. This is okay for most checks which use bitwise AND on the
relevant event type bits, but it doesn't work for non-connectable types,
which are checked with '== LE_EXT_ADV_NON_CONN_IND' (that is, zero).
In terms of behaviour, first the device sends a truncated report:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0040
Data status: Incomplete, data truncated, no more to come
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -98 dBm (0x9e)
Data length: 0x00
Then, a few seconds later, it sends the subsequent complete report:
> HCI Event: LE Meta Event (0x3e) plen 122
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -97 dBm (0x9f)
Data length: 0x60
Service Data: Google (0xfef3)
Data[92]: ...
These devices often send multiple truncated reports per second.
This patch introduces a PDU type mask to ensure only the relevant bits
are evaluated, allowing for the correct translation of all valid
extended advertising packets.
Fixes: b2cc9761f144 ("Bluetooth: Handle extended ADV PDU types") Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The firmware raises an alive interrupt upon receiving the HCI_RESET or
BTINTEL_HCI_OP_RESET (Intel reset - 0xfc01) command. This change fixes
the driver to properly wait for the alive interrupt to avoid driver
sending commands to firmware before it is ready to process.
For details on the handshake between the driver and firmware, refer to
commit 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between
driver and firmware").
As the driver needs to handle two interrupts for HCI_OP_RESET and
BTINTEL_HCI_OP_RESET, the firmware ensures that the TX completion
interrupt is always followed by the alive interrupt.
Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use macro for Intel Reset command (0xfc01) instead of hard coded value.
Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 69b3d3acf3db ("Bluetooth: btintel_pcie: Make driver wait for alive interrupt") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently both dev_coredumpv and skb_put_data in hci_devcd_dump use
hdev->dump.head. However, dev_coredumpv can free the buffer. From
dev_coredumpm_timeout documentation, which is used by dev_coredumpv:
> Creates a new device coredump for the given device. If a previous one hasn't
> been read yet, the new coredump is discarded. The data lifetime is determined
> by the device coredump framework and when it is no longer needed the @free
> function will be called to free the data.
If the data has not been read by the userspace yet, dev_coredumpv will
discard new buffer, freeing hdev->dump.head. This leads to
vmalloc-out-of-bounds error when skb_put_data tries to access
hdev->dump.head.
A crash report from syzbot illustrates this:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in skb_put_data
include/linux/skbuff.h:2752 [inline]
BUG: KASAN: vmalloc-out-of-bounds in hci_devcd_dump+0x142/0x240
net/bluetooth/coredump.c:258
Read of size 140 at addr ffffc90004ed5000 by task kworker/u9:2/5844
For WPA3-SAE Connection in EXTSAE mode, the userspace daemon is allowed to
generate the SAE Auth frames. The driver uses the "mgmt_frame" FW IOVAR to
transmit this MGMT frame.
Before sending the IOVAR, the Driver is incorrectly treating the channel
number read from the FW as a frequency value and again attempts to convert
this into a channel number using ieee80211_frequency_to_channel().
This added an invalid channel number as part of the IOVAR request to the FW
And some FW which strictly expects a valid channel would return BAD_CHAN
error, while failing to transmit the driver requested SAE Auth MGMT frame.
Fix this in the CYW vendor specific MGMT TX cfg80211 ops handler, by not
treating the channel number read from the FW as frequency value and skip
the attempt to convert it again into a channel number.
Also fix this in the generic MGMT TX cfg80211 ops handler.
Fixes: c2ff8cad6423 ("brcm80211: make mgmt_tx in brcmfmac accept a NULL channel") Fixes: 66f909308a7c ("wifi: brcmfmac: cyw: support external SAE authentication in station mode") Signed-off-by: Ting-Ying Li <tingying.li@cypress.com> Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250723105918.5229-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach
path") disables IOPF on device by removing the device from its IOMMU's
IOPF queue when the last IOPF-capable domain is detached from the device.
Unfortunately, it did this in a wrong place where there are still pending
IOPFs. As a result, a use-after-free error is potentially triggered and
eventually a kernel panic with a kernel trace similar to the following:
The intel_pasid_tear_down_entry() function is responsible for blocking
hardware from generating new page faults and flushing all in-flight
ones. Therefore, moving iopf_for_domain_remove() after this function
should resolve this.
Fixes: 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path") Reported-by: Ethan Milon <ethan.milon@eviden.com> Closes: https://lore.kernel.org/r/e8b37f3e-8539-40d4-8993-43a1f3ffe5aa@eviden.com Suggested-by: Ethan Milon <ethan.milon@eviden.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20250723072045.1853328-1-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Only the EOF bit handling for single frames was ported to the MLD
driver. The code to handle AMPDUs correctly was forgotten. Add it back
so that the bit is reported in the radiotap headers again.
Mark Rutland noticed that the task parameter is ignored and
'current' is being used instead. Since this is usually
what its passed, it hasn't yet been causing problems but likely
will as the code gets more testing.
But, once this is fixed, it creates a new bug in copy_thread_gcs()
since the gcs_el_mode isn't yet set for the task before its being
checked. Move gcs_alloc_thread_stack() after the new task's
gcs_el0_mode initialization to avoid this.
Fixes: fc84bc5378a8 ("arm64/gcs: Context switch GCS state for EL0") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250719043740.4548-2-jeremy.linton@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On devices without WANT_MONITOR_VIF (and probably without
channel context support) we get a WARN_ON for changing the
per-link setting of a monitor interface.
Since we already skip AP_VLAN interfaces and MONITOR with
WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update
the settings, catch this in the link change code instead
of the warning.
Reported-by: Martin Kaistra <martin.kaistra@linutronix.de> Link: https://lore.kernel.org/r/a9de62a0-28f1-4981-84df-253489da74ed@linutronix.de/ Fixes: c4382d5ca1af ("wifi: mac80211: update the right link for tx power") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In brcmf_cyw_mgmt_tx() the "len" counter of the struct
brcmf_mf_params_le::data flexible array is stored as little-endian via
cpu_to_le16() so the __counted_by_le() variant must be used:
Fixes: 4ffca5a96678 (mm: support only one page_type per page) Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Harry Yoo <harry.yoo@oracle.com> Link: https://patch.msgid.link/20250611155916.2579160-11-willy@infradead.org Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
kernel/kcsan/kcsan_test.c:591:41: error: variable 'dummy' is
uninitialized when passed as a const pointer argument here
[-Werror,-Wuninitialized-const-pointer]
591 | KCSAN_EXPECT_READ_BARRIER(atomic_read(&dummy), false);
| ^~~~~
1 error generated.
Although this particular test does not care about the value stored in
the dummy atomic variable, let's silence the warning.
Link: https://lkml.kernel.org/r/CA+G9fYu8JY=k-r0hnBRSkQQrFJ1Bz+ShdXNwC1TNeMt0eXaxeA@mail.gmail.com Fixes: 8bc32b348178 ("kcsan: test: Add test cases for memory barrier instrumentation") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the ring buffer was first introduced, reading the non-consuming
"trace" file required disabling the writing of the ring buffer. To make
sure the writing was fully disabled before iterating the buffer with a
non-consuming read, it would set the disable flag of the buffer and then
call an RCU synchronization to make sure all the buffers were
synchronized.
The function ring_buffer_read_start() originally would initialize the
iterator and call an RCU synchronization, but this was for each individual
per CPU buffer where this would get called many times on a machine with
many CPUs before the trace file could be read. The commit 72c9ddfd4c5bf
("ring-buffer: Make non-consuming read less expensive with lots of cpus.")
separated ring_buffer_read_start into ring_buffer_read_prepare(),
ring_buffer_read_sync() and then ring_buffer_read_start() to allow each of
the per CPU buffers to be prepared, call the read_buffer_read_sync() once,
and then the ring_buffer_read_start() for each of the CPUs which made
things much faster.
The commit 1039221cc278 ("ring-buffer: Do not disable recording when there
is an iterator") removed the requirement of disabling the recording of the
ring buffer in order to iterate it, but it did not remove the
synchronization that was happening that was required to wait for all the
buffers to have no more writers. It's now OK for the buffers to have
writers and no synchronization is needed.
Remove the synchronization and put back the interface for the ring buffer
iterator back before commit 72c9ddfd4c5bf was applied.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250630180440.3eabb514@batman.local.home Reported-by: David Howells <dhowells@redhat.com> Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator") Tested-by: David Howells <dhowells@redhat.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The processing of the struct cfg80211_sar_specs::sub_specs flexible
array requires its counter, num_sub_specs, to be assigned before the
loop in nl80211_set_sar_specs(). Leave the final assignment after the
loop in place in case fewer ended up in the array.
Fixes: aa4ec06c455d ("wifi: cfg80211: use __counted_by where appropriate") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250721183125.work.183-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While I caught the need for setting cnt early in nl80211_parse_rnr_elems()
in the original annotation of struct cfg80211_rnr_elems with __counted_by,
I missed a similar pattern in ieee80211_copy_rnr_beacon(). Fix this by
moving the cnt assignment to before the loop.
Fixes: 7b6d7087031b ("wifi: cfg80211: Annotate struct cfg80211_rnr_elems with __counted_by") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250721182521.work.540-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the trace event powernv_throttle is only used by the powernv code, move
it to a separate include file and have that code directly enable it.
Trace events can take up around 5K of memory when they are defined
regardless if they are used or not. It wastes memory to have them defined
in configurations where the tracepoint is not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/20250612145407.906308844@goodmis.org Fixes: 0306e481d479a ("cpufreq: powernv/tracing: Add powernv_throttle tracepoint") Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit bd99a3013bdc ("brcmfmac: move configuration of probe request
IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie()
got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().
Because of this, as part of the scan request handler for the P2P Discovery,
vif struct used for adding the Probe Request P2P IE in firmware got changed
from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly.
So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe
requests frames and the other P2P peers were unable to discover this device
causing a regression on the P2P feature.
To fix this, while setting the P2P IE in firmware, properly use the vif of
the P2P discovery wdev on which the driver received the P2P scan request.
This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie()
is completed.
Fixes: bd99a3013bdc ("brcmfmac: move configuration of probe request IEs") Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250626050706.7271-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently there is no endian conversion in ath12k_wmi_tlv_services_parser()
so the service bit parsing will be incorrect on a big endian platform and
to fix this by using appropriate endian conversion.
Fixes: 342527f35338 ("wifi: ath12k: Add support to parse new WMI event for 6 GHz regulatory") Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250717173539.2523396-2-tamizh.raja@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With 802.11 encapsulation offloading, ieee80211_tx_h_select_key() is
called on 802.3 frames. In that case do not try to use skb data as
valid 802.11 headers.
Ignore TXQs with the flag IEEE80211_TXQ_STOP when scheduling a queue.
The flag is only set after all fragments have been dequeued and won't
allow dequeueing other frames as long as the flag is set.
For drivers using ieee80211_txq_schedule_start() this prevents an
loop trying to push the queued frames while IEEE80211_TXQ_STOP is set:
After setting IEEE80211_TXQ_STOP the driver will call
ieee80211_return_txq(). Which calls __ieee80211_schedule_txq(), detects
that there sill are frames in the queue and immediately restarts the
stopped TXQ. Which can't dequeue any frame and thus starts over the loop.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Fixes: ba8c3d6f16a1 ("mac80211: add an intermediate software queue implementation") Link: https://patch.msgid.link/20250717162547.94582-2-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
If probe fails before ieee80211_register_hw() is successfully done,
ieee80211_unregister_hw() will be called anyway. This may lead to various
bugs as the implementation of ieee80211_unregister_hw() assumes that
ieee80211_register_hw() has been called.
Divide error handling section into relevant subsections, so that
ieee80211_unregister_hw() is called only when it is appropriate. Correct
the order of the calls: ieee80211_unregister_hw() should go before
plfxlc_mac_release(). Also move ieee80211_free_hw() to plfxlc_mac_release()
as it supposed to be the opposite to plfxlc_mac_alloc_hw() that calls
ieee80211_alloc_hw().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Link: https://patch.msgid.link/20250321185226.71-3-m.masimov@mt-integration.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot triggered a WARN in ieee80211_tdls_oper() by sending
NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT,
before association completed and without prior TDLS setup.
This left internal state like sdata->u.mgd.tdls_peer uninitialized,
leading to a WARN_ON() in code paths that assumed it was valid.
Reject the operation early if not in station mode or not associated.
Reported-by: syzbot+f73f203f8c9b19037380@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f73f203f8c9b19037380 Fixes: 81dd2b882241 ("mac80211: move TDLS data to mgd private part") Tested-by: syzbot+f73f203f8c9b19037380@syzkaller.appspotmail.com Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com> Link: https://patch.msgid.link/20250715230904.661092-2-moonhee.lee.ca@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We observed a regression in our customer’s environment after enabling
CONFIG_LAZY_RCU. In the Android Update Engine scenario, where ioctl() is
used heavily, we found that callbacks queued via call_rcu_hurry (such as
percpu_ref_switch_to_atomic_rcu) can sometimes be delayed by up to 5
seconds before execution. This occurs because the new grace period does
not start immediately after the previous one completes.
The root cause is that the wake_nocb_gp_defer() function now checks
"rdp->nocb_defer_wakeup" instead of "rdp_gp->nocb_defer_wakeup". On CPUs
that are not rcuog, "rdp->nocb_defer_wakeup" may always be
RCU_NOCB_WAKE_NOT. This can cause "rdp_gp->nocb_defer_wakeup" to be
downgraded and the "rdp_gp->nocb_timer" to be postponed by up to 10
seconds, delaying the execution of hurry RCU callbacks.
The trace log of one scenario we encountered is as follow:
// previous GP ends at this point
rcu_preempt [000] d..1. 137.240210: rcu_grace_period: rcu_preempt 8369 end
rcu_preempt [000] ..... 137.240212: rcu_grace_period: rcu_preempt 8372 reqwait
// call_rcu_hurry enqueues "percpu_ref_switch_to_atomic_rcu", the callback waited on by UpdateEngine
update_engine [002] d..1. 137.301593: __call_rcu_common: wyy: unlikely p_ref = 00000000********. lazy = 0
// FirstQ on cpu 2 rdp_gp->nocb_timer is set to fire after 1 jiffy (4ms)
// and the rdp_gp->nocb_defer_wakeup is set to RCU_NOCB_WAKE
update_engine [002] d..2. 137.301595: rcu_nocb_wake: rcu_preempt 2 FirstQ on cpu2 with rdp_gp (cpu0).
// FirstBQ event on cpu2 during the 1 jiffy, make the timer postpond 10 seconds later.
// also, the rdp_gp->nocb_defer_wakeup is overwrite to RCU_NOCB_WAKE_LAZY
update_engine [002] d..1. 137.301601: rcu_nocb_wake: rcu_preempt 2 WakeEmptyIsDeferred
...
...
...
// before the 10 seconds timeout, cpu0 received another call_rcu_hurry
// reset the timer to jiffies+1 and set the waketype = RCU_NOCB_WAKE.
kworker/u32:0 [000] d..2. 142.557564: rcu_nocb_wake: rcu_preempt 0 FirstQ
kworker/u32:0 [000] d..1. 142.557576: rcu_nocb_wake: rcu_preempt 0 WakeEmptyIsDeferred
kworker/u32:0 [000] d..1. 142.558296: rcu_nocb_wake: rcu_preempt 0 WakeNot
kworker/u32:0 [000] d..1. 142.558562: rcu_nocb_wake: rcu_preempt 0 WakeNot
// idle(do_nocb_deferred_wakeup) wake rcuog due to waketype == RCU_NOCB_WAKE
<idle> [000] d..1. 142.558786: rcu_nocb_wake: rcu_preempt 0 DoWake
<idle> [000] dN.1. 142.558839: rcu_nocb_wake: rcu_preempt 0 DeferredWake
rcuog/0 [000] ..... 142.558871: rcu_nocb_wake: rcu_preempt 0 EndSleep
rcuog/0 [000] ..... 142.558877: rcu_nocb_wake: rcu_preempt 0 Check
// finally rcuog request a new GP at this point (5 seconds after the FirstQ event)
rcuog/0 [000] d..2. 142.558886: rcu_grace_period: rcu_preempt 8372 newreq
rcu_preempt [001] d..1. 142.559458: rcu_grace_period: rcu_preempt 8373 start
...
rcu_preempt [000] d..1. 142.564258: rcu_grace_period: rcu_preempt 8373 end
rcuop/2 [000] D..1. 142.566337: rcu_batch_start: rcu_preempt CBs=219 bl=10
// the hurry CB is invoked at this point
rcuop/2 [000] b.... 142.566352: blk_queue_usage_counter_release: wyy: wakeup. p_ref = 00000000********.
This patch changes the condition to check "rdp_gp->nocb_defer_wakeup" in
the lazy path. This prevents an already scheduled "rdp_gp->nocb_timer"
from being postponed and avoids overwriting "rdp_gp->nocb_defer_wakeup"
when it is not RCU_NOCB_WAKE_NOT.
Fixes: 3cb278e73be5 ("rcu: Make call_rcu() lazy to save power") Co-developed-by: Cheng-jui Wang <cheng-jui.wang@mediatek.com> Signed-off-by: Cheng-jui Wang <cheng-jui.wang@mediatek.com> Co-developed-by: Lorry.Luo@mediatek.com Signed-off-by: Lorry.Luo@mediatek.com Tested-by: weiyangyang@vivo.com Signed-off-by: weiyangyang@vivo.com Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The AMD IOMMU documentation seems pretty clear that the V2 table follows
the normal CPU expectation of sign extension. This is shown in
Figure 25: AMD64 Long Mode 4-Kbyte Page Address Translation
Where bits Sign-Extend [63:57] == [56]. This is typical for x86 which
would have three regions in the page table: lower, non-canonical, upper.
The manual describes that the V1 table does not sign extend in section
2.2.4 Sharing AMD64 Processor and IOMMU Page Tables GPA-to-SPA
Further, Vasant has checked this and indicates the HW has an addtional
behavior that the manual does not yet describe. The AMDv2 table does not
have the sign extended behavior when attached to PASID 0, which may
explain why this has gone unnoticed.
The iommu domain geometry does not directly support sign extended page
tables. The driver should report only one of the lower/upper spaces. Solve
this by removing the top VA bit from the geometry to use only the lower
space.
This will also make the iommu_domain work consistently on all PASID 0 and
PASID != 1.
Adjust dma_max_address() to remove the top VA bit. It now returns:
5 Level:
Before 0x1ffffffffffffff
After 0x0ffffffffffffff
4 Level:
Before 0xffffffffffff
After 0x7fffffffffff
As BPF doesn't include any barrier instructions, smp_mb() is implemented
by doing a dummy value returning atomic operation. Such an operation
acts a full barrier as enforced by LKMM and also by the work in progress
BPF memory model.
If the returned value is not used, clang[1] can optimize the value
returning atomic instruction in to a normal atomic instruction which
provides no ordering guarantees.
Mark the variable as volatile so the above optimization is never
performed and smp_mb() works as expected.
Fixes: 097af47d3cfb ("drm/amdgpu/gfx10: wait for reset done before remap") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jiadong Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 4c953e53cc34 ("drm/amdgpu/gfx_9.4.3: wait for reset done before remap") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jiadong Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: fdbd69486b46 ("drm/amdgpu/gfx9: wait for reset done before remap") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jiadong Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to
ieee80211_iterate_stations_atomic(). Note in this case the iterator is
required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does
not follow it as it might sleep. Consequently below warning is seen:
BUG: sleeping function called from invalid context at wmi.c:304
Call Trace:
<TASK>
dump_stack_lvl
__might_resched.cold
ath11k_wmi_cmd_send
ath11k_wmi_set_peer_param
ath11k_mac_disable_peer_fixed_rate
ieee80211_iterate_stations_atomic
ath11k_mac_op_set_bitrate_mask.cold
Change to ieee80211_iterate_stations_mtx() to fix this issue.
Currently host sends HTT_TCL_METADATA_VER_V2 to the firmware
regardless of the operating mode (Mission or FTM).
Firmware expects additional software information (like peer ID, vdev
ID, and link ID) in Tx packets when HTT_TCL_METADATA_VER_V2 is set.
However, in FTM (Factory Test Mode) mode, no vdev is created on the
host side (this is expected). As a result, the firmware fails to find
the expected vdev during packet processing and ends up dropping
packets.
To fix this, send HTT_TCL_METADATA_VER_V1 in FTM mode because FTM
mode doesn't support HTT_TCL_METADATA_VER_V2.
The ieee80211_csa_finish() function currently uses for_each_sdata_link()
to iterate over links of sdata. However, this macro internally uses
wiphy_dereference(), which expects the wiphy->mtx lock to be held.
When ieee80211_csa_finish() is invoked under an RCU read-side critical
section (e.g., under rcu_read_lock()), this leads to a warning from the
RCU debugging framework.
This warning is triggered because wiphy_dereference() is not safe to use
without holding the wiphy mutex, and it is being used in an RCU context
without the required locking.
Fix this by introducing and using a new macro, for_each_sdata_link_rcu(),
which performs RCU-safe iteration over sdata links using
list_for_each_entry_rcu() and rcu_dereference(). This ensures that the
link pointers are accessed safely under RCU and eliminates the warning.
Fixes: f600832794c9 ("wifi: mac80211: restructure tx profile retrieval for MLO MBSSID") Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250711033846.40455-1-maharaja.kennadyrajan@oss.qualcomm.com
[unindent like the non-RCU macro] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DMA map functions can fail and should be tested for errors.
If the mapping fails, unmap and return an error.
Fixes: 788838ebe8a4 ("mwl8k: use pci_unmap_addr{,set}() to keep track of unmap addresses on rx") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://patch.msgid.link/20250709111339.25360-2-fourier.thomas@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When working in station mode, TDLS peers are assigned macid 0, even
though 0 was already assigned to the AP. This causes the connection
with the AP to stop working after the TDLS connection is torn down.
Assign the next available macid to TDLS peers, same as client stations
in AP mode.
Fixes: 902cb7b11f9a ("wifi: rtw88: assign mac_id for vif/sta and update to TX desc") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/58648c09-8553-4bcc-a977-9dc9afd63780@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for
phystats") increased the skb size when aggregation is enabled but decreased
it for the aggregation disabled case.
As a result, if a frame near the maximum size is received,
rtl8xxxu_rx_complete() is called with status -EOVERFLOW and then the
driver starts to malfunction and no further communication is possible.
Restore the skb size in the aggregation disabled case.
Fixes: 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for phystats") Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20250709121522.1992366-1-martin.kaistra@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp_measure_rcv_mss() is used to update icsk->icsk_ack.rcv_mss
(tcpi_rcv_mss in tcp_info) and tp->scaling_ratio.
Calling it from tcp_data_queue_ofo() makes sure these
fields are updated, and permits a better tuning
of sk->sk_rcvbuf, in the case a new flow receives many ooo
packets.
Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250711114006.480026-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling the kernel with LLVM, the following warning was issued:
drivers/xen/gntdev.c:991: warning: stack frame size (1160) exceeds
limit (1024) in function 'gntdev_ioctl'
The main reason is struct gntdev_copy_batch which is located on the
stack and has a size of nearly 1kb.
For performance reasons it shouldn't by just dynamically allocated
instead, so allocate a new instance when needed and instead of freeing
it put it into a list of free structs anchored in struct gntdev_priv.
On SM8250 / QRB5165-RB5 using PRR bits resets the device, most likely
because of the hyp limitations. Disable PRR support on that platform.
Fixes: 7f2ef1bfc758 ("iommu/arm-smmu: Add support for PRR bit setup") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Rob Clark <robin.clark@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250705-iommu-fix-prr-v2-1-406fecc37cf8@oss.qualcomm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function cache_tag_flush_all() was originally implemented with
incorrect device TLB invalidation logic that does not handle PASID, in
commit c4d27ffaa8eb ("iommu/vt-d: Add cache tag invalidation helpers")
This causes regressions where full address space TLB invalidations occur
with a PASID attached, such as during transparent hugepage unmapping in
SVA configurations or when calling iommu_flush_iotlb_all(). In these
cases, the device receives a TLB invalidation that lacks PASID.
This incorrect logic was later extracted into
cache_tag_flush_devtlb_all(), in commit 3297d047cd7f ("iommu/vt-d:
Refactor IOTLB and Dev-IOTLB flush for batching")
The fix replaces the call to cache_tag_flush_devtlb_all() with
cache_tag_flush_devtlb_psi(), which properly handles PASID.
The NID is used to control which NUMA node memory for the page table is
allocated it from. It should be a permanent property of the page table
when it was allocated and not change during attach/detach of devices.
dl_clear_root_domain() doesn't take into account the fact that per-rq
extra_bw variables retain values computed before root domain changes,
resulting in broken accounting.
Fix it by resetting extra_bw to max_bw before restoring back dl-servers
contributions.
Fixes: 2ff899e351643 ("sched/deadline: Rebuild root domain accounting after every update") Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b Link: https://lore.kernel.org/r/20250627115118.438797-3-juri.lelli@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[dma_buf_fd() fixes; no preferences regarding the tree it goes through -
up to xen folks]
As soon as we'd inserted a file reference into descriptor table, another
thread could close it. That's fine for the case when all we are doing is
returning that descriptor to userland (it's a race, but it's a userland
race and there's nothing the kernel can do about it). However, if we
follow fd_install() with any kind of access to objects that would be
destroyed on close (be it the struct file itself or anything destroyed
by its ->release()), we have a UAF.
dma_buf_fd() is a combination of reserving a descriptor and fd_install().
gntdev dmabuf_exp_from_pages() calls it and then proceeds to access the
objects destroyed on close - starting with gntdev_dmabuf itself.
Fix that by doing reserving descriptor before anything else and do
fd_install() only when everything had been set up.
When changing the page size on an mkey, the driver needs to set the
appropriate bits in the mkey mask to indicate which fields are being
modified.
The 6th bit of a page size in mlx5 driver is considered an extension,
and this bit has a dedicated capability and mask bits.
Previously, the driver was not setting this mask in the mkey mask when
performing page size changes, regardless of its hardware support,
potentially leading to an incorrect page size updates.
This fixes the issue by setting the relevant bit in the mkey mask when
performing page size changes on an mkey and the 6th bit of this field is
supported by the hardware.
Commit 21c167aa0ba9 ("net/sched: act_ctinfo: use percpu stats")
missed that stats_dscp_set, stats_dscp_error and stats_cpmark_set
might be written (and read) locklessly.
Use atomic64_t for these three fields, I doubt act_ctinfo is used
heavily on big SMP hosts anyway.
Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pedro Tammela <pctammela@mojatatu.com> Link: https://patch.msgid.link/20250709090204.797558-6-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
netem_enqueue's duplication prevention logic breaks when a netem
resides in a qdisc tree with other netems - this can lead to a
soft lockup and OOM loop in netem_dequeue, as seen in [1].
Ensure that a duplicating netem cannot exist in a tree with other
netems.
Previous approaches suggested in discussions in chronological order:
1) Track duplication status or ttl in the sk_buff struct. Considered
too specific a use case to extend such a struct, though this would
be a resilient fix and address other previous and potential future
DOS bugs like the one described in loopy fun [2].
2) Restrict netem_enqueue recursion depth like in act_mirred with a
per cpu variable. However, netem_dequeue can call enqueue on its
child, and the depth restriction could be bypassed if the child is a
netem.
3) Use the same approach as in 2, but add metadata in netem_skb_cb
to handle the netem_dequeue case and track a packet's involvement
in duplication. This is an overly complex approach, and Jamal
notes that the skb cb can be overwritten to circumvent this
safeguard.
4) Prevent the addition of a netem to a qdisc tree if its ancestral
path contains a netem. However, filters and actions can cause a
packet to change paths when re-enqueued to the root from netem
duplication, leading us to the current solution: prevent a
duplicating netem from inhabiting the same tree as other netems.
devm_mutex_init() can fail. With CONFIG_DEBUG_MUTEXES=y the mutex will be
marked as unusable and trigger errors on usage.
Add the missed check.
Fixes: 87a59548af95 ("leds: lp8860: Use new mutex guards to cleanup function exits") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Andrew Davis <afd@ti.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/20250617-must_check-devm_mutex_init-v7-2-d9e449f4d224@weissschuh.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Per the PCIe spec, behavior of the PASID capability is undefined if the
value of the PASID Enable bit changes while the Enable bit of the
function's ATS control register is Set. Unfortunately,
pdev_enable_caps() does exactly that by ordering enabling ATS for the
device before enabling PASID.
Remove the declaration of 'err' inside the 'if (timetravel)' block,
as it would otherwise be unavailable outside that block, potentially
leading to uml_rtc_start() returning an uninitialized value.
In order to ensure the HTT DebugFS structs shared with firmware have
matching alignment, the structs should be packed. Most of the structs
are correctly packed, however the following are not:
The maximum bandwidth an interface can operate in is defined by the
configured country. However, currently, it is able to operate in
bandwidths greater than the allowed bandwidth. For example,
the Central African Republic (CF) supports a maximum bandwidth of 40 MHz
in both the 2 GHz and 5 GHz bands, but an interface is still able to
operate in bandwidths higher than 40 MHz. This issue arises because the
regulatory rules in the regd are not updated with these restrictions
received from firmware on the maximum bandwidth.
Hence, update the regulatory rules with unsupported bandwidth flags based
on the maximum bandwidth to ensure compliance with country-specific
regulations.
The object is potentially already gone after the drm_gem_object_put().
In general the object should be fully constructed before calling
drm_gem_handle_create(), except the debugfs tracking uses a separate
lock and list and separate flag to denotate whether the object is
actually initialized.
Since I'm touching this all anyway simplify this by only adding the
object to the debugfs when it's ready for that, which allows us to
delete that separate flag. panthor_gem_debugfs_bo_rm() already checks
whether we've actually been added to the list or this is some error
path cleanup.
v2: Fix build issues for !CONFIG_DEBUGFS (Adrián)
v3: Add linebreak and remove outdated comment (Liviu)
Fixes: a3707f53eb3f ("drm/panthor: show device-wide list of DRM GEM objects over DebugFS") Cc: Adrián Larumbe <adrian.larumbe@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Simona Vetter <simona.vetter@intel.com> Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250709135220.1428931-1-simona.vetter@ffwll.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
It's needed to check the return value of lockdep_commit_lock_is_held(),
otherwise there's no point in this assertion as it doesn't print any
debug information on itself.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: b04df3da1b5c ("netfilter: nf_tables: do not defer rule destruction via call_rcu") Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This practically reverts commit 28339b21a365 ("netfilter: nf_tables: do
not send complete notification of deletions"): The feature was never
effective, due to prior modification of 'event' variable the conditional
early return never happened.
User space also relies upon the current behaviour, so better reintroduce
the shortened deletion notifications once it is fixed.
Fixes: 28339b21a365 ("netfilter: nf_tables: do not send complete notification of deletions") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Dietmar reported that commit 3840cbe24cf0 ("sched: psi: fix bogus
pressure spikes from aggregation race") caused a regression for him on
a high context switch rate benchmark (schbench) due to the now
repeating cpu_clock() calls.
In particular the problem is that get_recent_times() will extrapolate
the current state to 'now'. But if an update uses a timestamp from
before the start of the update, it is possible to get two reads
with inconsistent results. It is effectively back-dating an update.
(note that this all hard-relies on the clock being synchronized across
CPUs -- if this is not the case, all bets are off).
Combine this problem with the fact that there are per-group-per-cpu
seqcounts, the commit in question pushed the clock read into the group
iteration, causing tree-depth cpu_clock() calls. On architectures
where cpu_clock() has appreciable overhead, this hurts.
Instead move to a per-cpu seqcount, which allows us to have a single
clock read for all group updates, increasing internal consistency and
lowering update overhead. This comes at the cost of a longer update
side (proportional to the tree depth) which can cause the read side to
retry more often.
The all video ports of rk3568/rk3588 share the same OVL_LAYER_SEL
and OVL_PORT_SEL registers, and the configuration of these two registers
can be set to take effect when the vsync signal arrives at a certain Video
Port.
If two threads for two display output choose to update these two registers
simultaneously to meet their own plane adjustment requirements(change plane
zpos or switch plane from one crtc to another), then no matter which Video
Port'svsync signal we choose to follow for these two registers, the display
output of the other Video Port will be abnormal.
This is because the configuration of this Video Port does not take
effect at the right time (its configuration should take effect when its
VSYNC signal arrives).
In order to solve this problem, when performing plane migration or
change the zpos of planes, there are two things to be observed and
followed:
1. When a plane is migrated from one VP to another, the configuration of
the layer can only take effect after the Port mux configuration is
enabled.
2. When change the zpos of planes, we must ensure that the change for
the previous VP takes effect before we proceed to change the next VP.
Otherwise, the new configuration might overwrite the previous one for
the previous VP, or it could lead to the configuration of the previous
VP being take effect along with the VSYNC of the new VP.
This issue only occurs in scenarios where multi-display output is enabled.
Fixes: c5996e4ab109 ("drm/rockchip: vop2: Make overlay layer select register configuration take effect by vsync") Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250421102156.424480-1-andyshrk@163.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Each window of a vop2 is usable by a specific set of video ports, so while
binding the vop2, we look through the list of available windows trying to
find one designated as primary-plane and usable by that specific port.
The code later wants to use drm_crtc_init_with_planes with that found
primary plane, but nothing has checked so far if a primary plane was
actually found.
For whatever reason, the rk3576 vp2 does not have a usable primary window
(if vp0 is also in use) which brought the issue to light and ended in a
null-pointer dereference further down.
As we expect a primary-plane to exist for a video-port, add a check at
the end of the window-iteration and fail probing if none was found.
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver") Reviewed-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250610212748.1062375-1-heiko@sntech.de Signed-off-by: Sasha Levin <sashal@kernel.org>
When CONFIG_DEBUG_EFI is enabled, some objects are needlessly rebuilt.
[Steps to reproduce]
Enable CONFIG_DEBUG_EFI and run 'make' twice in a clean source tree.
On the second run, arch/arm64/kernel/head.o is rebuilt even though
no files have changed.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- clean
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
[ snip ]
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CALL scripts/checksyscalls.sh
AS arch/arm64/kernel/head.o
AR arch/arm64/kernel/built-in.a
AR arch/arm64/built-in.a
AR built-in.a
[ snip ]
The issue is caused by the use of the $(realpath ...) function.
At the time arch/arm64/kernel/Makefile is parsed on the first run,
$(objtree)/vmlinux does not exist. As a result,
$(realpath $(objtree)/vmlinux) expands to an empty string.
On the second run of Make, $(objtree)/vmlinux already exists, so
$(realpath $(objtree)/vmlinux) expands to the absolute path of vmlinux.
However, this change in the command line causes arch/arm64/kernel/head.o
to be rebuilt.
To address this issue, use $(abspath ...) instead, which does not require
the file to exist. While $(abspath ...) does not resolve symlinks, this
should be fine from a debugging perspective.
The GNU Make manual [1] clearly explains the difference between the two:
$(realpath names...)
For each file name in names return the canonical absolute name.
A canonical name does not contain any . or .. components, nor any
repeated path separators (/) or symlinks. In case of a failure the
empty string is returned. Consult the realpath(3) documentation for
a list of possible failure causes.
$(abspath namees...)
For each file name in names return an absolute name that does not
contain any . or .. components, nor any repeated path separators (/).
Note that, in contrast to realpath function, abspath does not resolve
symlinks and does not require the file names to refer to an existing
file or directory. Use the wildcard function to test for existence.
The same problem exists in drivers/firmware/efi/libstub/Makefile.zboot.
On the first run of Make, $(obj)/vmlinuz.efi.elf does not exist when the
Makefile is parsed, so -DZBOOT_EFI_PATH is set to an empty string.
Replace $(realpath ...) with $(abspath ...) there as well.
Ensure that all radios remain down when the driver operates in Factory
Test Mode (FTM). Reject any userspace attempts to bring up an
interface in this mode.
Currently, the driver allows userspace to bring up the interface even
though it operates in FTM mode, which violates FTM constraints and
leads to FTM command failures.
Hence, block the radio start when the driver is in FTM mode. Also,
remove ath12k_ftm_mode check from ath12k_drain_tx() because FTM mode
check is already handled in the caller function
(ath12k_mac_op_start()).
[ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733
[ +0.000012] The buggy address belongs to the object at ffff88812eec8000
which belongs to the cache kmalloc-rnd-07-4k of size 4096
[ +0.000016] The buggy address is located 3160 bytes inside of
freed 4096-byte region [ffff88812eec8000, ffff88812eec9000)
The use-after-free occurs because a delayed work item (`suspend_work`) may still
be pending or running when resources it accesses are freed during device removal
or file close. The previous code used `flush_work(&fpriv->evf_mgr.suspend_work.work)`,
which does not wait for delayed work that has not yet started. As a result, the
delayed work could run after its memory was freed, causing a use-after-free.
By switching to `flush_delayed_work(&fpriv->evf_mgr.suspend_work)`, we ensure that
the kernel waits for both queued and delayed work to finish before
freeing memory, closing this race.
Fixes: adba0929736a ("drm/amdgpu: Fix Illegal opcode in command stream Error") Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
