Commit 0dc23567c206 ("thermal: core: Move lists of thermal instances
to trip descriptors") overlooked the case in which the Power Allocator
governor attempts to bind to a tripless thermal zone and params->trip_max
is NULL in check_power_actors().
No power actors can be found in that case, so check_power_actors() needs
to be made return 0 then to restore its previous behavior.
Fixes: 0dc23567c206 ("thermal: core: Move lists of thermal instances to trip descriptors") Closes: https://lore.kernel.org/linux-pm/Z0NeGF4ryCe_b5rr@sashalap/ Reported-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/2761105.mvXUDI8C0e@rjwysocki.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The init_rt_signal_env() funciton is called before the alternative patch
is applied, so using the alternative-related API to check the availability
of an extension within this function doesn't have the intended effect.
This patch reorders the init_rt_signal_env() and apply_boot_alternatives()
to get the correct signal_minsigstksz.
Fixes: e92f469b0771 ("riscv: signal: Report signal frame size to userspace via auxv") Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Zong Li <zong.li@sifive.com> Reviewed-by: Andy Chiu <andybnac@gmail.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20241220083926.19453-3-yongxuan.wang@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The signal context of certain RISC-V extensions will be appended after
struct __riscv_extra_ext_header, which already includes an empty context
header. Therefore, there is no need to preserve a separate hdr for the
END of signal context.
Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector") Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Zong Li <zong.li@sifive.com> Reviewed-by: Andy Chiu <AndybnAC@gmail.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20241220083926.19453-2-yongxuan.wang@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure the compare value in the lr/sc loop is sign extended to match
what lr.w does. Fortunately, due to the compiler keeping the register
contents sign extended anyway the lack of the explicit extension didn't
result in wrong code so far, but this cannot be relied upon.
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Commit 0d73a55208e9 ("ima: re-introduce own integrity cache lock")
mistakenly reverted the performance improvement introduced in commit 42a4c603198f0 ("ima: fix ima_inode_post_setattr"). The unused bit mask was
subsequently removed by commit 11c60f23ed13 ("integrity: Remove unused
macro IMA_ACTION_RULE_FLAGS").
Restore the performance improvement by introducing the new mask
IMA_NONACTION_RULE_FLAGS, equal to IMA_NONACTION_FLAGS without
IMA_NEW_FILE, which is not a rule-specific flag.
Finally, reset IMA_NONACTION_RULE_FLAGS instead of IMA_NONACTION_FLAGS in
process_measurement(), if the IMA_CHANGE_ATTR atomic flag is set (after
file metadata modification).
With this patch, new files for which metadata were modified while they are
still open, can be reopened before the last file close (when security.ima
is written), since the IMA_NEW_FILE flag is not cleared anymore. Otherwise,
appraisal fails because security.ima is missing (files with IMA_NEW_FILE
set are an exception).
a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called
without preceding balance_scx()") added a workaround to handle the cases
where pick_task_scx() is called without prececing balance_scx() which is due
to a fair class bug where pick_taks_fair() may return NULL after a true
return from balance_fair().
The workaround detects when pick_task_scx() is called without preceding
balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid
stalling. Unfortunately, the workaround code was testing whether @prev was
on SCX to decide whether to keep the task running. This is incorrect as the
task may be on SCX but no longer runnable.
This could lead to a non-runnable task to be returned from pick_task_scx()
which cause interesting confusions and failures. e.g. A common failure mode
is the task ending up with (!on_rq && on_cpu) state which can cause
potential wakers to busy loop, which can easily lead to deadlocks.
Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes
@prev_on_scx only used in one place. Open code the usage and improve the
comment while at it.
Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Pat Cody <patcody@meta.com> Fixes: a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") Cc: stable@vger.kernel.org # v6.12+ Acked-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The problem is the additional read in the slow path (after it
decremented to RCUREF_NOREF) which can happen after the counter has been
marked RCUREF_DEAD.
Prevent this by reusing the return value of the decrement. Now every "final"
put uses RCUREF_NOREF in the slow path and attempts the final cmpxchg() to
RCUREF_DEAD.
[ bigeasy: Add changelog ]
Fixes: ee1ee6db07795 ("atomics: Provide rcuref - scalable reference counting") Reported-by: kernel test robot <oliver.sang@intel.com> Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/oe-lkp/202412311453.9d7636a2-lkp@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the kernel, there are architectures (x86, arm64) that perform
boot-time relocation (for KASLR) without relying on PIE codegen. In this
case, all const global objects are emitted into .rodata, including const
objects with fields that will be fixed up by the boot-time relocation
code. This implies that .rodata (and .text in some cases) need to be
writable at boot, but they will usually be mapped read-only as soon as
the boot completes.
When using PIE codegen, the compiler will emit const global objects into
.data.rel.ro rather than .rodata if the object contains fields that need
such fixups at boot-time. This permits the linker to annotate such
regions as requiring read-write access only at load time, but not at
execution time (in user space), while keeping .rodata truly const (in
user space, this is important for reducing the CoW footprint of dynamic
executables).
This distinction does not matter for the kernel, but it does imply that
const data will end up in writable memory if the .data.rel.ro sections
are not treated in a special way, as they will end up in the writable
.data segment by default.
Before this patch, if the checksum was not used, the subflow was only
reset if map_data_len was != 0. If there were no MPTCP options or an
invalid mapping, map_data_len was not set to the data len, and then the
subflow was not reset as it should have been, leaving the MPTCP
connection in a wrong fallback mode.
This map_data_len condition has been introduced to handle the reception
of the infinite mapping. Instead, a new dedicated mapping error could
have been returned and treated as a special case. However, the commit 31bf11de146c ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced
by Paolo Abeni soon after, and backported later on to stable. It better
handle the csum case, and it means the exception for valid_csum_seen in
subflow_can_fallback(), plus this one for the infinite mapping in
subflow_check_data_avail(), are no longer needed.
In other words, the code can be simplified there: a fallback should only
be done if msk->allow_infinite_fallback is set. This boolean is set to
false once MPTCP-specific operations acting on the whole MPTCP
connection vs the initial path have been done, e.g. a second path has
been created, or an MPTCP re-injection -- yes, possible even with a
single subflow. The subflow_can_fallback() helper can then be dropped,
and replaced by this single condition.
This also makes the code clearer: a fallback should only be done if it
is possible to do so.
While at it, no need to set map_data_len to 0 in get_mapping_status()
for the infinite mapping case: it will be set to skb->len just after, at
the end of subflow_check_data_avail(), and not read in between.
Fixes: f8d4bcacff3b ("mptcp: infinite mapping receiving") Cc: stable@vger.kernel.org Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indeed the PM can try to send a RM_ADDR over a msk without acquiring
first the msk socket lock.
The bugged code-path comes from an early optimization: when there
are no subflows, the PM should (usually) not send RM_ADDR
notifications.
The above statement is incorrect, as without locks another process
could concurrent create a new subflow and cause the RM_ADDR generation.
Additionally the supposed optimization is not very effective even
performance-wise, as most mptcp sockets should have at least one
subflow: the MPC one.
Address the issue removing the buggy code path, the existing "slow-path"
will handle correctly even the edge case.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reported-by: syzbot+cd3ce3d03a3393ae9700@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/546 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-1-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables") Reported-by: Fab Stz <fabstz-it@yahoo.fr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Fab Stz <fabstz-it@yahoo.fr> Cc: All applicable <stable@vger.kernel.org> Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f816 ("iommu/vt-d: Add support for static identity domain") Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks
PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not
inverted when applied to the register values. Fix it.
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.
For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.
[ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[ 173.765837] usb usb3-port2: config error
Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.
There is an off-by-one issue for the err_chained_bd path, it will free
one more tx_swbd than expected. But there is no such issue for the
err_map_data path. To fix this off-by-one issue and make the two error
handling consistent, the increment of 'i' and 'count' remain in sync
and enetc_unwind_tx_frame() is called for error handling.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an issue with one-step timestamp based on UDP/IP. The peer will
discard the sync packet because of the wrong UDP checksum. For ENETC v1,
the software needs to update the UDP checksum when updating the
originTimestamp field, so that the hardware can correctly update the UDP
checksum when updating the correction field. Otherwise, the UDP checksum
in the sync packet will be wrong.
Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only
ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash
if VFs are used to test one-step timestamp, the crash log as follows.
When creating a TSO header, if the skb is VLAN tagged, the extended BD
will be used and the 'count' should be increased by 2 instead of 1.
Otherwise, when an error occurs, less tx_swbd will be freed than the
actual number.
Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While setting the DAC value, the wrong boolean value is evaluated to set
the DSP bias current. So let's correct the conditional statement and use
the right boolean value read from the DTS set in the priv.
Cc: stable@vger.kernel.org Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family") Signed-off-by: George Moussalem <george.moussalem@outlook.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250219130923.7216-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loongson's DWMAC device may take nearly two seconds to complete DMA reset,
however, the default waiting time for reset is 200 milliseconds.
Therefore, the following error message may appear:
[14.427169] dwmac-loongson-pci 0000:00:03.2: Failed to reset the dma
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb()/writeb()).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Fixes: 015e61f0bffd ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller") Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Cc: stable@vger.kernel.org # v6.3+ Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250220125612.1910990-1-zhoubinbin@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The customer reports that there is a soft lockup issue related to
the i2c driver. After checking, the i2c module was doing a tx transfer
and the bmc machine reboots in the middle of the i2c transaction, the i2c
module keeps the status without being reset.
Due to such an i2c module status, the i2c irq handler keeps getting
triggered since the i2c irq handler is registered in the kernel booting
process after the bmc machine is doing a warm rebooting.
The continuous triggering is stopped by the soft lockup watchdog timer.
Disable the interrupt enable bit in the i2c module before calling
devm_request_irq to fix this issue since the i2c relative status bit
is read-only.
For devices that natively support zone append operations,
REQ_OP_ZONE_APPEND BIOs are not processed through zone write plugging
and are immediately issued to the zoned device. This means that there is
no write pointer offset tracking done for these operations and that a
zone write plug is not necessary.
However, when receiving a zone append BIO, we may already have a zone
write plug for the target zone if that zone was previously partially
written using regular write operations. In such case, since the write
pointer offset of the zone write plug is not incremented by the amount
of sectors appended to the zone, 2 issues arise:
1) we risk leaving the plug in the disk hash table if the zone is fully
written using zone append or regular write operations, because the
write pointer offset will never reach the "zone full" state.
2) Regular write operations that are issued after zone append operations
will always be failed by blk_zone_wplug_prepare_bio() as the write
pointer alignment check will fail, even if the user correctly
accounted for the zone append operations and issued the regular
writes with a correct sector.
Avoid these issues by immediately removing the zone write plug of zones
that are the target of zone append operations when blk_zone_plug_bio()
is called. The new function blk_zone_wplug_handle_native_zone_append()
implements this for devices that natively support zone append. The
removal of the zone write plug using disk_remove_zone_wplug() requires
aborting all plugged regular write using disk_zone_wplug_abort() as
otherwise the plugged write BIOs would never be executed (with the plug
removed, the completion path will never see again the zone write plug as
disk_get_zone_wplug() will return NULL). Rate-limited warnings are added
to blk_zone_wplug_handle_native_zone_append() and to
disk_zone_wplug_abort() to signal this.
Since blk_zone_wplug_handle_native_zone_append() is called in the hot
path for operations that will not be plugged, disk_get_zone_wplug() is
optimized under the assumption that a user issuing zone append
operations is not at the same time issuing regular writes and that there
are no hashed zone write plugs. The struct gendisk atomic counter
nr_zone_wplugs is added to check this, with this counter incremented in
disk_insert_zone_wplug() and decremented in disk_remove_zone_wplug().
To be consistent with this fix, we do not need to fill the zone write
plug hash table with zone write plugs for zones that are partially
written for a device that supports native zone append operations.
So modify blk_revalidate_seq_zone() to return early to avoid allocating
and inserting a zone write plug for partially written sequential zones
if the device natively supports zone append.
When the range of present physical memory is sufficiently small enough
and the reserved address space for the linear map is sufficiently large
enough, The linear map base address is randomized in
arm64_memblock_init().
Prior to commit 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and
use it consistently"), we decided if the sizes were suitable with the
help of the raw mmfr0.parange. But the commit changed this to use the
sanitized version instead. But the function runs before the register has
been sanitized so this returns 0, interpreted as a parange of 32 bits.
Some fun wrapping occurs and the logic concludes that there is enough
room to randomize the linear map base address, when really there isn't.
So the top of the linear map ends up outside the reserved address space.
Since the PA range cannot be overridden in the first place, restore the
mmfr0 reading logic to its state prior to 62cffa496aac, where the raw
register value is used.
Reported-by: Luiz Capitulino <luizcap@redhat.com> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Closes: https://lore.kernel.org/all/a3d9acbe-07c2-43b6-9ba9-a7585f770e83@redhat.com/ Fixes: 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and use it consistently") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20250225114638.2038006-1-ryan.roberts@arm.com Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
DC is not using amdgpu_irq_get/put to manage the HPD interrupt refcounts.
So when amdgpu_irq_gpu_reset_resume_helper() reprograms all of the IRQs,
HPD gets disabled.
[How]
Use amdgpu_irq_get/put() for HPD init/fini in DM in order to sync refcounts
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f3dde2ff7fcaacd77884502e8f572f2328e9c745) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[why]
some board designs have eDP0 connected to DP1, need a way to enable
support_edp0_on_dp1 flag, otherwise edp related features cannot work
[how]
do a dmi check during dm initialization to identify systems that
require support_edp0_on_dp1. Optimize quirk table with callback
functions to set quirk entries, retrieve_dmi_info can set quirks
according to quirk entries
Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yilin Chen <Yilin.Chen@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6d17270d18a6a6753fff046330483d43f8405e4) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
PSR-SU may cause some glitching randomly on several panels.
[How]
Temporarily disable the PSR-SU and fallback to PSR1 for
all eDP panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3388 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6deeefb820d0efb0b36753622fb982d03b37b3ad) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a quirk added to add a workaround for a Sapphire
RX 5600 XT Pulse that didn't allow BAR resizing. However,
the quirk caused a regression with runtime pm on Dell laptops
using those chips, rather than narrowing the scope of the
resizing quirk, add a quirk to prevent amdgpu from resizing
the BAR on those Dell platforms unless runtime pm is disabled.
v2: update commit message, add runpm check
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707 Fixes: 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5235053f443cef4210606e5fb71f99b915a9723d) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When userspace applications call AMDKFD_IOC_UPDATE_QUEUE. Preserve
bitfields that do not need to be modified as they contain flags to
track queue states that are used by CP FW.
Signed-off-by: David Yat Sin <David.YatSin@amd.com> Reviewed-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8150827990b709ab5a40c46c30d21b7f7b9e9440) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we treat EFAULT from hmm_range_fault() as a non-fatal error
when called from xe_vm_userptr_pin() with the idea that we want to avoid
killing the entire vm and chucking an error, under the assumption that
the user just did an unmap or something, and has no intention of
actually touching that memory from the GPU. At this point we have
already zapped the PTEs so any access should generate a page fault, and
if the pin fails there also it will then become fatal.
However it looks like it's possible for the userptr vma to still be on
the rebind list in preempt_rebind_work_func(), if we had to retry the
pin again due to something happening in the caller before we did the
rebind step, but in the meantime needing to re-validate the userptr and
this time hitting the EFAULT.
Followed by NPD, when running some workload, since the sg was never
actually populated but the vma is still marked for rebind when it should
be skipped for this special EFAULT case. This is confirmed to fix the
user report.
v2 (MattB):
- Move earlier.
v3 (MattB):
- Update the commit message to make it clear that this indeed fixes the
issue.
Fixes: 521db22a1d70 ("drm/xe: Invalidate userptr VMA on page pin fault") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.10+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-5-matthew.auld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 6b93cb98910c826c2e2004942f8b060311e43618) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On error restore anything still on the pin_list back to the invalidation
list on error. For the actual pin, so long as the vma is tracked on
either list it should get picked up on the next pin, however it looks
possible for the vma to get nuked but still be present on this per vm
pin_list leading to corruption. An alternative might be then to instead
just remove the link when destroying the vma.
v2:
- Also add some asserts.
- Keep the overzealous locking so that we are consistent with the docs;
updating the docs and related bits will be done as a follow up.
Fixes: ed2bdf3b264d ("drm/xe/vm: Subclass userptr vmas") Suggested-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250221143840.167150-4-matthew.auld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4e37e928928b730de9aa9a2f5dc853feeebc1742) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b79e8fd954c4 ("drm/xe: Remove dependency on intel_engine_regs.h")
introduced an internal set of engine registers, however, as part of this
change, it has also introduced two duplicate `define' lines for
`RING_CTL_SIZE(size)'. This commit was introduced to the tree in v6.8-rc1.
While this is harmless as the definitions did not change, so no compiler
warning was observed.
Drop this line anyway for the sake of correctness.
Cc: stable@vger.kernel.org # v6.8-rc1+ Fixes: b79e8fd954c4 ("drm/xe: Remove dependency on intel_engine_regs.h") Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250225073104.865230-1-jeffbai@aosc.io Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6b68c4542ffecc36087a9e14db8fc990c88bb01b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
$ perf record -e cpu_core/instructions/ppp -F 120
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_core/instructions/ppp).
"dmesg | grep -i perf" may provide additional information.
The limit_period() check avoids a low sampling period on a counter. It
doesn't intend to limit the frequency.
The check in the x86_pmu_hw_config() should be limited to non-freq mode.
The attr.sample_period and attr.sample_freq are union. The
attr.sample_period should not be used to indicate the frequency mode.
The perf_iterate_ctx() function performs RCU list traversal but
currently lacks RCU read lock protection. This causes lockdep warnings
when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y:
WARNING: suspicious RCU usage
kernel/events/core.c:8168 RCU-list traversed in non-reader section!!
This protection was previously present but was removed in commit bd2756811766 ("perf: Rewrite core context handling"). Add back the
necessary rcu_read_lock()/rcu_read_unlock() pair around
perf_iterate_ctx() call in perf_event_exec().
[ mingo: Use scoped_guard() as suggested by Peter ]
Oh yeah, it's as bad as it looks. Remember that VHE loads the stage-2
MMU eagerly but a VMID only gets attached to the MMU later on in the
KVM_RUN loop.
Even in the "best case" where VTTBR_EL2 correctly gets reprogrammed
before entering the EL1&0 regime, there is a period of time where
hardware is configured with VMID 0. That's completely insane. So, rather
than decorating the 'late' binding with another hack, just allocate the
damn thing up front.
Attaching a VMID from vcpu_load() is still rollover safe since
(surprise!) it'll always get called after a vCPU was preempted.
Excuse me while I go find a brown paper bag.
Cc: stable@vger.kernel.org Fixes: 934bf871f011 ("KVM: arm64: Load the stage-2 MMU context in kvm_vcpu_load_vhe()") Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20250219220737.130842-1-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a regression introduced a few weeks ago in stable kernels
6.12.14 and 6.13.3. The internal microphone on ASUS Vivobook N705UD /
X705UD laptops is broken: the microphone appears in userspace (e.g.
Gnome settings) but no sound is detected.
I bisected it to commit 3b4309546b48 ("ALSA: hda: Fix headset detection
failure due to unstable sort").
I figured out the cause:
1. The initial pins enabled for the ALC256 driver are:
cfg->inputs == {
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
2. Since 2017 and commits c1732ede5e8 ("ALSA: hda/realtek - Fix headset
and mic on several ASUS laptops with ALC256") and 28e8af8a163 ("ALSA:
hda/realtek: Fix mic and headset jack sense on ASUS X705UD"), the
quirk ALC256_FIXUP_ASUS_MIC is also applied to ASUS X705UD / N705UD
laptops.
This added another internal microphone on pin 0x13:
cfg->inputs == {
{ pin=0x13, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x19, type=AUTO_PIN_MIC,
is_headset_mic=1, is_headphone_mic=0, has_boost_on_pin=1 },
{ pin=0x1a, type=AUTO_PIN_MIC,
is_headset_mic=0, is_headphone_mic=0, has_boost_on_pin=1 } }
I don't know what this pin 0x13 corresponds to. To the best of my
knowledge, these laptops have only one internal microphone.
3. Before 2025 and commit 3b4309546b48 ("ALSA: hda: Fix headset
detection failure due to unstable sort"), the sort function would let
the microphone of pin 0x1a (the working one) *before* the microphone
of pin 0x13 (the phantom one).
4. After this commit 3b4309546b48, the fixed sort function puts the
working microphone (pin 0x1a) *after* the phantom one (pin 0x13). As
a result, no sound is detected anymore.
It looks like the quirk ALC256_FIXUP_ASUS_MIC is not needed anymore for
ASUS Vivobook X705UD / N705UD laptops. Without it, everything works
fine:
- the internal microphone is detected and records actual sound,
- plugging in a jack headset is detected and can record actual sound
with it,
- unplugging the jack headset makes the system go back to internal
microphone and can record actual sound.
Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64}
produce zero and skip stddev computation in that case.
For now don't care about rec->counter * rec->counter overflow because
rec->time * rec->time overflow will likely happen earlier.
Cc: stable@vger.kernel.org Cc: Wen Yang <wenyang@linux.alibaba.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250206090156.1561783-1-kniv@yandex-team.ru Fixes: e31f7939c1c27 ("ftrace: Avoid potential division by zero in function profiler") Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home Fixes: 067fe038e70f6 ("tracing: Add variable reference handling to hist triggers") Reported-by: Tomas Glozar <tglozar@redhat.com> Tested-by: Tomas Glozar <tglozar@redhat.com> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an invalid function ID of an SBI extension is used we should
return not-supported, not invalid-param. Also, when we see that at
least one hartid constructed from the base and mask parameters is
invalid, then we should return invalid-param. Finally, rather than
relying on overflowing a left shift to result in zero and then using
that zero in a condition which [correctly] skips sending an IPI (but
loops unnecessarily), explicitly check for overflow and exit the loop
immediately.
Fixes: 5f862df5585c ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20250217084506.18763-10-ajones@ventanamicro.com Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The spec says suspend_type is 32 bits wide and "In case the data is
defined as 32bit wide, higher privilege software must ensure that it
only uses 32 bit data." Mask off upper bits of suspend_type before
using it.
"Not stopped" means started or suspended so we need to check for
a single state in order to have a chance to check for each state.
Also, we need to use target_vcpu when checking for the suspend
state.
A previous patch ensured that USB Type C connector support is enabled,
but it is still possible to build the phy driver without enabling
CONFIG_USB (host support) or CONFIG_USB_GADGET (device support), and
in that case the common helper functions are unavailable:
aarch64-linux-ld: drivers/phy/rockchip/phy-rockchip-usbdp.o: in function `rk_udphy_probe':
phy-rockchip-usbdp.c:(.text+0xe74): undefined reference to `usb_get_maximum_speed'
Select CONFIG_USB_COMMON directly here, like we do in some other phy
drivers, to make sure this is available even when actual USB support
is disabled or in a loadable module that cannot be reached from a
built-in phy driver.
I still have some Soekris net4826 in a Community Wireless Network I
volunteer with. These devices use an AMD SC1100 SoC. I am running
OpenWrt on them, which uses a patched kernel, that naturally has
evolved over time. I haven't updated the ones in the field in a
number of years (circa 2017), but have one in a test bed, where I have
intermittently tried out test builds.
A few years ago, I noticed some trouble, particularly when "warm
booting", that is, doing a reboot without removing power, and noticed
the device was hanging after the kernel message:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
If I removed power and then restarted, it would boot fine, continuing
through the message above, thusly:
[ 0.081615] Working around Cyrix MediaGX virtual DMA bugs.
[ 0.090076] Enable Memory-Write-back mode on Cyrix/NSC processor.
[ 0.100000] Enable Memory access reorder on Cyrix/NSC processor.
[ 0.100070] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.110058] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.120037] CPU: NSC Geode(TM) Integrated Processor by National Semi (family: 0x5, model: 0x9, stepping: 0x1)
[...]
In order to continue using modern tools, like ssh, to interact with
the software on these old devices, I need modern builds of the OpenWrt
firmware on the devices. I confirmed that the warm boot hang was still
an issue in modern OpenWrt builds (currently using a patched linux
v6.6.65).
Last night, I decided it was time to get to the bottom of the warm
boot hang, and began bisecting. From preserved builds, I narrowed down
the bisection window from late February to late May 2019. During this
period, the OpenWrt builds were using 4.14.x. I was able to build
using period-correct Ubuntu 18.04.6. After a number of bisection
iterations, I identified a kernel bump from 4.14.112 to 4.14.113 as
the commit that introduced the warm boot hang.
So, I tried reverting just that kernel change on top of the breaking
OpenWrt commit, and my warm boot hang went away.
Presumably, the warm boot hang is due to some register not getting
cleared in the same way that a loss of power does. That is
approximately as much as I understand about the problem.
More poking/prodding and coaching from Jonas Gorski, it looks
like this test patch fixes the problem on my board: Tested against
v6.6.67 and v4.14.113.
Fixes: 18fb053f9b82 ("x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors") Debugged-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/CAHP3WfOgs3Ms4Z+L9i0-iBOE21sdMk5erAiJurPjnrL9LSsgRA@mail.gmail.com Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
A C jump table (such as the one used by the BPF interpreter) is a const
global array of absolute code addresses, and this means that the actual
values in the table may not be known until the kernel is booted (e.g.,
when using KASLR or when the kernel VA space is sized dynamically).
When using PIE codegen, the compiler will default to placing such const
global objects in .data.rel.ro (which is annotated as writable), rather
than .rodata (which is annotated as read-only). As C jump tables are
explicitly emitted into .rodata, this used to result in warnings for
LoongArch builds (which uses PIE codegen for the entire kernel) like
Warning: setting incorrect section attributes for .rodata..c_jump_table
due to the fact that the explicitly specified .rodata section inherited
the read-write annotation that the compiler uses for such objects when
using PIE codegen.
This warning was suppressed by explicitly adding the read-only
annotation to the __attribute__((section(""))) string, by commit
c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Unfortunately, this hack does not work on Clang's integrated assembler,
which happily interprets the appended section type and permission
specifiers as part of the section name, which therefore no longer
matches the hard-coded pattern '.rodata..c_jump_table' that objtool
expects, causing it to emit a warning
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame
Work around this, by emitting C jump tables into .data.rel.ro instead,
which is treated as .rodata by the linker script for all builds, not
just PIE based ones.
Fixes: c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table") Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> # on LoongArch Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
params->total_weight is not initialized during bind and not updated when
the bound cdev changes. The cooling device weight will not be used due
to the uninitialized total_weight, until an update via sysfs is
triggered.
The bound cdevs are updated during thermal zone registration, where each
cooling device will be bound to the thermal zone one by one, but
power_allocator_bind() can be called without an additional cdev update
when manually changing the policy of a thermal zone via sysfs.
Add a new function to handle weight update logic, including updating
total_weight, and call it when bind, weight changes, and cdev updates to
ensure total_weight is always correct.
Fixes: a3cd6db4cc2e ("thermal: gov_power_allocator: Support new update callback of weights") Signed-off-by: Yu-Che Cheng <giver@chromium.org> Link: https://patch.msgid.link/20250222-fix-power-allocator-weight-v2-1-a94de86b685a@chromium.org
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In almost all places where a thermal zone's list of thermal instances
is walked, there is a check to match a specific trip point and it is
walked in vain whenever there are no cooling devices associated with
the given trip.
To address this, store the lists of thermal instances in trip point
descriptors instead of storing them in thermal zones and adjust all
code using those lists accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/5522726.Sb9uPGUboI@rjwysocki.net Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Stable-dep-of: 0cde378a10c1 ("thermal: gov_power_allocator: Update total_weight on bind and cdev updates") Signed-off-by: Sasha Levin <sashal@kernel.org>
Since thermal_of_should_bind() terminates the loop after processing
the first child found in cooling-maps, it will never match more than
one cdev to a given trip point which is incorrect, as there may be
cooling-maps associating one trip point with multiple cooling devices.
Address this by letting the loop continue until either all
children have been processed or a matching one has been found.
To avoid adding conditionals or goto statements, put the loop in
question into a separate function and make that function return
right away after finding a matching cooling-maps entry.
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in
perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same
perf_event_pmu_context, but not in the same order.
The problem is that the order of pmu_ctx_list for the parent is impacted by
the time when an event/PMU is added. While the order for a child is
impacted by the event order in the pinned_groups and flexible_groups. So
the order of pmu_ctx_list in the parent and child may be different.
To fix this problem, insert the perf_event_pmu_context to its proper place
after iteration of the pmu_ctx_list.
The follow testcase can trigger above warning:
# perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out &
# perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out
pid = fork();
if (pid == -1) {
printf("fork error\n");
return;
}
if (pid == 0) {
while (1) {
count++;
}
} else {
while (1) {
count++;
}
}
}
The testcase first opens an LBR event, so it will allocate task_ctx_data,
and then open tracepoint and software events, so the parent context will
have 3 different perf_event_pmu_contexts. On inheritance, child ctx will
insert the perf_event_pmu_context in another order and the warning will
trigger.
divvy_up_power() should use weighted_req_power instead of req_power to
calculate granted_power. Otherwise, granted_power may be unexpected as
the denominator total_req_power is a weighted sum.
This is a mistake made during the previous refactor.
Replace req_power with weighted_req_power in divvy_up_power()
calculation.
Fixes: 912e97c67cc3 ("thermal: gov_power_allocator: Move memory allocation out of throttle()") Signed-off-by: Yu-Che Cheng <giver@chromium.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/20250219-fix-power-allocator-calc-v1-1-48b860291919@chromium.org
[ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
IEP driver supports both perout and pps signal generation
but perout feature is faulty with half-cooked support
due to some missing configuration. Remove perout
support from the driver and reject perout requests with
"not supported" error code.
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API") Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd66f ("gro: New frags interface to avoid copying shinfo") Signed-off-by: Mohammad Heib <mheib@redhat.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recently a bug was discovered where the server had entered TCP_ESTABLISHED
state, but the upper layers were not notified.
The same 5-tuple packet may be processed by different CPUSs, so two
CPUs may receive different ack packets at the same time when the
state is TCP_NEW_SYN_RECV.
In that case, req->ts_recent in tcp_check_req may be changed concurrently,
which will probably cause the newsk's ts_recent to be incorrectly large.
So that tcp_validate_incoming will fail. At this point, newsk will not be
able to enter the TCP_ESTABLISHED.
The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get
the newsk into the TCP_ESTABLISHED state, but at this point it is no
longer possible to notify the upper layer application. A notification
mechanism could be added here, but the fix is more complex, so the
current fix is used.
In tcp_check_req, req->ts_recent is used to assign a value to
tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent
and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the
req fixes this bug.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
As part of switchdev environment setup, uplink VSI is configured as
default for both Tx and Rx. Default Rx VSI is also used by promiscuous
mode. If promisc mode is enabled and an attempt to enter switchdev mode
is made, the setup will fail because Rx VSI is already configured as
default (rule exists).
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
In switchdev setup, use ice_set_dflt_vsi() instead of plain
ice_cfg_dflt_vsi(), which avoids repeating setting default VSI for Rx if
it's already configured.
Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees
all VFs without removing them from snapshot PF-VF mailbox list, leading
to list corruption.
Reproducer:
devlink dev eswitch set $PF1_PCI mode switchdev
ip l s $PF1 up
ip l s $PF1 promisc on
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
Trace (minimized):
list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330).
kernel BUG at lib/list_debug.c:29!
RIP: 0010:__list_add_valid_or_report+0xa6/0x100
ice_mbx_init_vf_info+0xa7/0x180 [ice]
ice_initialize_vf_entry+0x1fa/0x250 [ice]
ice_sriov_configure+0x8d7/0x1520 [ice]
? __percpu_ref_switch_mode+0x1b1/0x5d0
? __pfx_ice_sriov_configure+0x10/0x10 [ice]
Sometimes a KASAN report can be seen instead with a similar stack trace:
BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100
VFs are added to this list in ice_mbx_init_vf_info(), but only removed
in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is
also being called in other places where VFs are being removed (including
ice_free_vfs() itself).
Fixes: 8cd8a6b17d27 ("ice: move VF overflow message count into struct ice_mbx_vf_info") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
E830 adds hardware support to prevent the VF from overflowing the PF
mailbox with VIRTCHNL messages. E830 will use the hardware feature
(ICE_F_MBX_LIMIT) instead of the software solution ice_is_malicious_vf().
To prevent a VF from overflowing the PF, the PF sets the number of
messages per VF that can be in the PF's mailbox queue
(ICE_MBX_OVERFLOW_WATERMARK). When the PF processes a message from a VF,
the PF decrements the per VF message count using the E830_MBX_VF_DEC_TRIG
register.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 79990cf5e7ad ("ice: Fix deinitializing VF in error path") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes: 8f0b3cc9a4c1 ("tcp: RX path for devmem TCP") Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
am65-cpsw uses page_pool_dev_alloc_pages(), thus needs PAGE_POOL
selected to avoid linker errors. This is missing since the driver
started to use page_pool helpers in 8acacc40f733 ("net: ethernet:
ti: am65-cpsw: Add minimal XDP support")
ASUS VivoBook 15 with SSID 1043:1460 took an incorrect quirk via the
pin pattern matching for ASUS (ALC256_FIXUP_ASUS_MIC), resulting in
the two built-in mic pins (0x13 and 0x1b). This had worked without
problems casually in the past because the right pin (0x1b) was picked
up as the primary device. But since we fixed the pin enumeration for
other bugs, the bogus one (0x13) is picked up as the primary device,
hence the bug surfaced now.
For addressing the regression, this patch explicitly specifies the
quirk entry with ALC256_FIXUP_ASUS_MIC_NO_PRESENCE, which sets up only
the headset mic pin.
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
This does not affect SoundWire or I2C control.
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
