Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Fri, 22 Apr 2016 09:32:01 +0000 (12:32 +0300)]
wic: add system_id attribute to Partition
Added Partition.system_id attribute and initialized it
from parse result of wks option --system-id. It will be
used by the wic code below the call stack to set partition
system id.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic: isoimage-isohybrid: add grubefi configfile support
The latest wic kickstart refactoring introduced a bootloader option
"--configfile" which lets wks' specify a custom grub.cfg for use
while booting. This is very useful for creating stuff like boot menus.
This change lets isoimage-isohybrid use --configfile; if this option is
not specified in a wks, it generates a default cfg as before.
Ross Burton [Wed, 20 Apr 2016 15:54:37 +0000 (16:54 +0100)]
busybox: don't build ar
As it's not 1978 anymore, nobody is using ar for anything apart from static
archives. If people are using static archives, then binutils provides a far
more capable ar.
Dengke Du [Tue, 19 Apr 2016 08:55:53 +0000 (04:55 -0400)]
bash: fixed ptest run-builtins failed
1. redirect the stderr output of the command exec with -l option to
/dev/null.
Because when we run command exec with -l option in builtins.tests,
it is a login shell, so it would read the file /etc/profile, that
file executes the /usr/bin/resize which added by commit: cc6360f4c4d97e0000f9d3545f381224ee99ce7d
The /usr/bin/resize is produced by busybox that source code resize.c
contains:
fprintf(stderr, ESC"7" ESC"[r" ESC"[999;999H" ESC"[6n");
In the end, it outputs an escape sequence to the stderr, so when we
compare the test output file /tmp/xx with builtins.right, it failed.
we need to redirect the stderr output to the /dev/null to solve the
problem.
2. ensure the target system contains the locales "en_US.UTF-8".
Because when run the run-builtins, it executes the source5.sub file
that contain:
LC_ALL=en_US.UTF-8
such as add the following to the local.conf:
IMAGE_LINGUAS_append = " en-us"
Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
IMAGE_CMD_xxx commands are always inlined within do_image_xxx.
When IMAGE_CMD_xxx is defined as a function (e.g. IMAGE_CMD_btrfs,
IMAGE_CMD_cpio, etc), a redundant copy of the function will be emitted
by default. Remove IMAGE_CMD_xxx 'func' flags to prevent that.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-firmware: break out bnx2 mips firmware and WHENCE license
Break out the bnx2 mips firmware into an independent subpackage.
Since the bnx2 firmware license is contained in the common WHENCE file
also package that separately so that other firmware that is licensed
within that file may depend upon a standalone package containing it.
do_split_package() constructs a list of packages that were created as it
iterates through the files, so if multiple files go into the same package then
the package will be repeated in the output.
Solve this by using a set() to store the created packages so that duplicates are
ignored.
Ruslan Bilovol [Wed, 13 Apr 2016 18:17:20 +0000 (21:17 +0300)]
kernel-uimage: change target image to vmlinux
Commit e69525: "kernel: Build uImage only when really
needed" hardcoded target kernel image to zImage for
case if uImage is generated by OpenEmbedded buildsystem.
However not all kernel architectures support zImage
target, for example AArch64 doesn't, so building of
kernel is failing on this step.
So instead of building zImage target that may not
exist for many architectures, build vmlinux target
that exists for all architectures.
Since kernel-uboot.bbclass uses vmlinux anyway for
creating image, there is no side effect on this change.
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Configure autodetects libtomcrypt, but then it adds libtommath to
$LIBS and fails to link subsequent tests if it's unavailable.
| checking for pcre.h... yes
| checking for pcre_compile in -lpcre... no
| checking whether to build with PCRE library... no
| ++ executing failure action
| configure: error: unable to find usable PCRE library
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gobject-introspection: fix floating dep on python-mako
This was resulting in non-deterministic builds where g-ir-doc-tool may or may
not exist depending on whether python-mako was built previously. Add
a PACKAGECONFIG so the dependency is explicit.
Signed-off-by: Sujith H <sujith.h@gmail.com> Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Sujith Haridasan <Sujith_Haridasan@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sdk.py: preserve packaging data when SDKIMAGE_FEATURES has "package-management"
This is not enabled by default, as there are still limitations and possible
issues with opkg (and rpm?) packaging data containing broken symlinks for
local indexes:
There are other use cases for the packaging data to be available in SDK,
since it provides comprehensive info about SDK's contents and in the case of
opkg and dpkg is all text-based and can be easily parsed by simple scripts.
Introduce new "package-management" flag for SDKIMAGE_FEATURES list (similar
to the one already used for IMAGE_FEATURES) that controls presence of the
packaging data in resulting SDK, while unifying this behavior across the
board for supported pkg managers - rpm, opkg, dpkg.
Richard Purdie [Fri, 22 Apr 2016 13:51:22 +0000 (14:51 +0100)]
lib/oe/rootfs: Fix DEBUGFS generation when using opkg
When enabling extra DEBUGFS image generation with opkg, errors are seen like:
ERROR: core-image-minimal-1.0-r0 do_rootfs: Cannot get the installed packages list. Command '/media/build1/poky/build/tmp/sysroots/x86_64-linux/usr/bin/opkg -f /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version status' returned 0 and stderr:
Collected errors:
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/syslog-startup.conf.busybox: No such file or directory.
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/fstab: No such file or directory.
basically for all CONFFILES in the image. This is due to the file rearranging
the rootfs generation code does. If we preserve the /etc directory,
the avoids the problem.
We need to tell copyfile to preserve symlinks since some are present in /etc.
Ross Burton [Tue, 19 Apr 2016 16:20:19 +0000 (17:20 +0100)]
boost: improve configure
Instead of adding a custom task (do_boostconfig) simply use the existing
do_configure.
Ensure that there are no relative paths in do_configure.
Instead of editing the user-config.jam sample file in the source tree (which is
entirely comments) and extending it on every build, create a new user-config.jam
in ${WORKDIR}.
Ross Burton [Tue, 19 Apr 2016 16:07:59 +0000 (17:07 +0100)]
boost: delete the build directory before rebuilding
If there is an existing build directory when do enter do_compile() then delete
it, as it contains the previous build. If the rebuild was caused because
dependencies have changed we want to ensure that a rebuild actually happens.
Markus Lehtonen [Thu, 21 Apr 2016 11:03:26 +0000 (14:03 +0300)]
license.bbclass: make sure that image manifest dir exists
Previously, write_deploy_manifest() was relying on
write_package_manifest() to create the subdirectory for the manifest
file. However, do_rootfs may be an empty function so that
write_package_manifest() will not be called and the manifest
subdirectory will not be created, causing a build failure. This patch
fixes that by creating the directory hierarchy inside
write_deploy_manifest().
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John [Thu, 21 Apr 2016 09:24:07 +0000 (12:24 +0300)]
busybox: update flock behavior to match upstream
In "util-linux" implementation of flock, -c 'PROG ARGS' means run
"sh -c 'PROG ARGS'". At present, busybox implementation doesn't follow it.
That causes errors like the one listed below:
smart install /media/cronie-1.5.0-r0.core2_64.rpm
Updating cache...
<snip>
Output from cronie-1.5.0-r0@core2_64:
Running groupadd commands...
NOTE: cronie: Performing groupadd with [ --system crontab]
ERROR: cronie: groupadd command did not succeed.
error: %pre(cronie-1.5.0-r0.core2_64) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping
cronie-1.5.0-r0.core2_64
This is because we use flock command in preinstall scripts in packages
which create new groups/users.
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Attempting to install ptest for valgrind fails with this error:
error: Can't install valgrind-ptest-3.11.0-r0.1@ppce500mc: no package
provides /this/is/a/bogus/interpreter/name
This is because one of the tests contains a bogus interpreter path on purpose
It is not enough to skip the QA warning about the missing dependency
but the dependency have to be completely removed.
Since this package contains oly tests it is safe to disable per file
dependencies and rely on the ones per package.
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
they keep the versions in-sync. changes are all in data.
Changes affecting future time stamps
America/Caracas switches from -0430 to -04 on 2016-05-01 at 02:30.
(Thanks to Alexander Krivenyshev for the heads-up.)
Asia/Magadan switches from +10 to +11 on 2016-04-24 at 02:00.
(Thanks to Alexander Krivenyshev and Matt Johnson.)
New zone Asia/Tomsk, split off from Asia/Novosibirsk. It covers
Tomsk Oblast, Russia, which switches from +06 to +07 on 2016-05-29
at 02:00. (Thanks to Stepan Golosunov.)
Changes affecting past time stamps
New zone Europe/Kirov, split off from Europe/Volgograd. It covers
Kirov Oblast, Russia, which switched from +04/+05 to +03/+04 on
1989-03-26 at 02:00, roughly a year after Europe/Volgograd made
the same change. (Thanks to Stepan Golosunov.)
Russia and nearby locations had daylight-saving transitions on
1992-03-29 at 02:00 and 1992-09-27 at 03:00, instead of on
1992-03-28 at 23:00 and 1992-09-26 at 23:00. (Thanks to Stepan
Golosunov.)
Many corrections to historical time in Kazakhstan from 1991
through 2005. (Thanks to Stepan Golosunov.) Replace Kazakhstan's
invented time zone abbreviations with numeric abbreviations.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Tue, 19 Apr 2016 20:17:39 +0000 (17:17 -0300)]
syslinux.bbclass: Remove APPEND from variable dependency
The value of APPEND is already being tracked and does impact on the
generated configuration file. This reverts the OE-Core:3c2d7ae5 commit
as it is not need anymore.
Elliot Smith [Tue, 19 Apr 2016 16:28:47 +0000 (17:28 +0100)]
bitbake: toaster-tests: tests for build dashboard
Convert existing tests to Selenium.
Add basic tests to check that the modal contains radio buttons to select
a custom image to edit when a build built multiple custom images, and
to create a new custom image from one of the images built during
the build.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 19 Apr 2016 16:28:46 +0000 (17:28 +0100)]
bitbake: toaster: add modal to select custom image for editing
Add functionality to the placeholder button on the build dashboard
to open a modal dialog displaying editable custom images, in cases
where multiple custom images were built by the build. Where there
is only one editable custom image, go direct to its edit page.
The images shown in the modal are custom recipes for the project
which were built during the build shown in the dashboard.
This also affects the new custom image dialog, as that also has
to show custom image recipes as well as image recipes built during
the build. Modify the API on the Build object to support both.
Also modify and rename the queryset_to_list template filter so that
it can deal with lists as well as querysets, as the new custom image
modal has to show a list of image recipes which is an amalgam of two
querysets.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 19 Apr 2016 16:28:45 +0000 (17:28 +0100)]
bitbake: toaster: add build dashboard buttons to edit/create custom images
When a build is viewed in the dashboard, enable users to edit
a custom image which was built during that build, and/or create
a new custom image based on one of the image recipes built during
the build.
Add methods to the Build model to enable querying for the
set of image recipes built during a build.
Add buttons to the dashboard, with the "Edit custom image"
button opening a basic modal for now. The "New custom image"
button opens the existing new custom image modal, but is modified
to show a list of images available as a base for a new custom image.
Add a new function to the new custom image modal's script which
enables multiple potential custom images to be shown as radio
buttons in the dialog (if there is more than 1). Modify existing
code to use this new function.
Add a template filter which allows the queryset of recipes for
a build to be available to client-side scripts, and from there
be used to populate the new custom image modal.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 19 Apr 2016 16:28:43 +0000 (17:28 +0100)]
bitbake: toaster-tests: add tests for new custom image page
Test adding a new custom image when:
1. No custom images are in the project yet.
2. User tries to add custom image which duplicates the name of
an existing custom image.
3. User tries to add custom image which duplicates the name
of a non-image recipe.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 19 Apr 2016 16:28:42 +0000 (17:28 +0100)]
bitbake: toaster: prevent exception when Project.release is null
Project.release can be null. This causes an exception when calling
get_all_compatible_layer_versions(), as the query to fetch
the layer versions references release.branch_name.
Add a guard to the function so that an empty queryset is returned
if the release isn't set for a project.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 19 Apr 2016 16:28:41 +0000 (17:28 +0100)]
bitbake: toaster: only prevent duplicate custom image names within a project
We currently prevent the same name being used for multiple custom
images, but make the check across all projects. This means that
custom image names have to be unique across all projects in
the Toaster installation.
Modify how we validate the name of a custom image so that we
only prevent duplication of custom image names within a project,
while ensuring that the name of a custom image doesn't duplicate
the name of a recipe which is not a custom image recipe.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 19 Apr 2016 16:28:40 +0000 (17:28 +0100)]
bitbake: toaster: disable/enable "Add layer" button according to input's content
In the import layer page, the "Add layer" button in the layer dependencies
section doesn't accurately reflect whether the layer name in the
corresponding input can be added. A partial or empty layer name can
leave the button active, such that when it is clicked, a
previously-selected layer can be accidentally added.
Fix by keeping track of the items currently available in the typeahead,
only activating the "Add layer" button when the input matches the name
of one of those items.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith [Tue, 19 Apr 2016 16:28:39 +0000 (17:28 +0100)]
bitbake: toaster: fix sorting after hiding a column in build tables
When hiding a column in the build tasks or build packages included
table, if the column is set as the current order by for the table, the
order by is not reset to the default. The result is that the table
stays sorted by the hidden column.
Set the default_orderby for these two tables correctly to ensure the
corresponding table is re-sorted when a column is hidden, if that column
was being used as the order by.
Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Wood [Tue, 19 Apr 2016 16:28:38 +0000 (17:28 +0100)]
bitbake: toaster: ensure ToasterTable headings are reset when order by changes
If a ToasterTable is ordered by an optional column and that
column is subsequently hidden, the table ordering switches back
to the default ordering for the table. However, the table headings
don't update to reflect the new ordering. This is because the
code which sets the heading weight and hides/shows the caret symbols
only runs when the table is first loaded.
Store the default order by and re-apply it when the data is updated.
Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Tue, 19 Apr 2016 19:34:00 +0000 (16:34 -0300)]
syslinux.bbclass: The AUTO_SYSLINUXMENU value needs to be boolean
The python code expects AUTO_SYSLINUXMENU to be a boolean value,
otherwise the logic fails. This fixes the code comparing the value to
"1" which is the value expected by the shell script code, counterpart.
Ross Burton [Tue, 19 Apr 2016 12:56:00 +0000 (13:56 +0100)]
perf: pass DESTDIR in EXTRA_OEMAKE
Instead of passing DESTDIR just in the make install invocation, pass it in
EXTRA_OEMAKE. This appears to stop perf from rebuilding at instal time for me,
which appears to be the trigger for the random build failure.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 18 Apr 2016 09:29:26 +0000 (02:29 -0700)]
xf86-video-omapfb: remove EXTRA_OECONF_armv7a
Fixe when build with armv7a:
gcc -c ../../git/src/sw-exa.c -fPIC -DPIC -o .libs/sw-exa.o
{standard input}: Assembler messages:
{standard input}:179: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode
{standard input}:182: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode
{standard input}:183: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode
{standard input}:184: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode
{standard input}:185: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode
{standard input}:186: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode
{standard input}:187: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2'
{standard input}:188: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode
{standard input}:239: Error: selected processor does not support `vld1.u8 {d0},[r1]!' in ARM mode
{standard input}:242: Error: selected processor does not support `vld1.u8 {d1},[r4]!' in ARM mode
{standard input}:243: Error: selected processor does not support `vld1.u8 {q1},[r0]!' in ARM mode
{standard input}:244: Error: selected processor does not support `vzip.u8 d0,d1' in ARM mode
{standard input}:245: Error: selected processor does not support `vld1.u8 {q2},[ip]!' in ARM mode
{standard input}:246: Error: selected processor does not support `vst2.u8 {q0,q1},[fp]!' in ARM mode
{standard input}:247: Error: selected FPU does not support instruction -- `vmov.u8 q1,q2'
{standard input}:248: Error: selected processor does not support `vst2.u8 {q0,q1},[lr]!' in ARM mode
make[2]: *** [image-format-conversions.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
../../git/src/omapfb-crtc.c: In function 'OMAPFBCrtcResize':
../../git/src/omapfb-crtc.c:34:12: warning: unused variable 'ofb' [-Wunused-variable]
OMAPFBPtr ofb = OMAPFB(pScrn);
^
../../git/src/omapfb-xv.c:66:43: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
{ XvSettable | XvGettable, 0, 0xffff, "XV_COLORKEY" },
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add separate variable for configuration options generated from
PACKAGECONFIG setting, this helps other bbclasses and recipes
to take advantage of PACKAGECONFIG mechanism, without including
other options from EXTRA_OECONF
* e.g. meta-qt5 recipes are abusing EXTRA_OECONF to get options
from PACKAGECONFIG:
EXTRA_QMAKEVARS_PRE +=
but with
conf/distro/include/no-static-libs.inc
it means getting --disable-static as invalid option inside
EXTRA_QMAKEVARS_PRE as reported by Alexandre Belloni who tried
to use poky with meta-qt5.
* once we migrate all bbclasses and recipes to PACKAGECONFIG_CONFARGS
we should also restrict EXTRA_OECONF append only to autotools.bbclass
like I did for cmake.bbclass
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Tue, 19 Apr 2016 11:17:04 +0000 (14:17 +0300)]
license.bbclass: do write_deploy_manifest in image postprocessing
Call write_deploy_manifest() in image postprocessing phase, instead of
rootfs postprocessing. The reason being that not necessarily all
do_deploy tasks are dependencies of the do_rootfs and we might miss
something.
Paul Eggleton [Tue, 19 Apr 2016 11:09:11 +0000 (23:09 +1200)]
devtool: sdk-update: fix handling of UNINATIVE_CHECKSUM changes
If UNINATIVE_CHECKSUM changes over an SDK update, bitbake within the
extensible SDK will be broken because it will see that the matching
uninative tarball doesn't exist and if there is a default value of
UNINATIVE_URL it will attempt to download the file and will then fail
because the checksums don't match up; alternatively if no UNINATIVE_URL
is set then it'll also fail with an error about misconfiguration. To fix
this, add some logic to devtool sdk-update to download the matching
uninative tarball(s) for the checksum(s) in the newly fetched SDK
configuration.
toasterconf.json: Remove fido from supported configurations
It looks like the master branch will no longer build with the Fido
release, so remove all references to fido and make sure that the file
sets up local, master and jethro releases.
toasterconf.json: Remove fido from supported configurations
It looks like the master branch will no longer build with the Fido
release, so remove all references to fido and make sure that the file
sets up local, master and jethro releases.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
