Currently, the hibmcge netdev acquires the rtnl_lock in
pci_error_handlers.reset_prepare() and releases it in
pci_error_handlers.reset_done().
However, in the PCI framework:
pci_reset_bus - __pci_reset_slot - pci_slot_save_and_disable_locked -
pci_dev_save_and_disable - err_handler->reset_prepare(dev);
In pci_slot_save_and_disable_locked():
list_for_each_entry(dev, &slot->bus->devices, bus_list) {
if (!dev->slot || dev->slot!= slot)
continue;
pci_dev_save_and_disable(dev);
if (dev->subordinate)
pci_bus_save_and_disable_locked(dev->subordinate);
}
This will iterate through all devices under the current bus and execute
err_handler->reset_prepare(), causing two devices of the hibmcge driver
to sequentially request the rtnl_lock, leading to a deadlock.
Since the driver now executes netif_device_detach()
before the reset process, it will not concurrently with
other netdev APIs, so there is no need to hold the rtnl_lock now.
Therefore, this patch removes the rtnl_lock during the reset process and
adjusts the position of HBG_NIC_STATE_RESETTING to ensure
that multiple resets are not executed concurrently.
Fixes: 3f5a61f6d504f ("net: hibmcge: Add reset supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Same pattern as previous patch: do not keep the expectation object
alive via refcount, only store a cookie value and then use that
as the skip hint for dump resumption.
AFAICS this has the same issue as the one resolved in the conntrack
dumper, when we do
if (!refcount_inc_not_zero(&exp->use))
to increment the refcount, there is a chance that exp == last, which
causes a double-increment of the refcount and subsequent memory leak.
Fixes: cf6994c2b981 ("[NETFILTER]: nf_conntrack_netlink: sync expectation dumping with conntrack table dumping") Fixes: e844a928431f ("netfilter: ctnetlink: allow to dump expectation per master conntrack") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a reference count leak in ctnetlink_dump_table():
if (res < 0) {
nf_conntrack_get(&ct->ct_general); // HERE
cb->args[1] = (unsigned long)ct;
...
While its very unlikely, its possible that ct == last.
If this happens, then the refcount of ct was already incremented.
This 2nd increment is never undone.
This prevents the conntrack object from being released, which in turn
keeps prevents cnet->count from dropping back to 0.
This will then block the netns dismantle (or conntrack rmmod) as
nf_conntrack_cleanup_net_list() will wait forever.
This can be reproduced by running conntrack_resize.sh selftest in a loop.
It takes ~20 minutes for me on a preemptible kernel on average before
I see a runaway kworker spinning in nf_conntrack_cleanup_net_list.
One fix would to change this to:
if (res < 0) {
if (ct != last)
nf_conntrack_get(&ct->ct_general);
But this reference counting isn't needed in the first place.
We can just store a cookie value instead.
A followup patch will do the same for ctnetlink_exp_dump_table,
it looks to me as if this has the same problem and like
ctnetlink_dump_table, we only need a 'skip hint', not the actual
object so we can apply the same cookie strategy there as well.
Commit b40c5f4fde22 ("udp: disable inner UDP checksum offloads in
IPsec case") tried to fix checksumming in UFO when the packets are
going through IPsec, so that we can't rely on offloads because the UDP
header and payload will be encrypted.
But when doing a TCP test over VXLAN going through IPsec transport
mode with GSO enabled (esp4_offload module loaded), I'm seeing broken
UDP checksums on the encap after successful decryption.
The skbs get to udp4_ufo_fragment/__skb_udp_tunnel_segment via
__dev_queue_xmit -> validate_xmit_skb -> skb_gso_segment and at this
point we've already dropped the dst (unless the device sets
IFF_XMIT_DST_RELEASE, which is not common), so need_ipsec is false and
we proceed with checksum offload.
Make need_ipsec also check the secpath, which is not dropped on this
callpath.
This change causes traffic using GSO with SW crypto running through a
NIC capable of HW offload to no longer get segmented during
validate_xmit_xfrm, and is unrelated to the bonding use case mentioned
in the commit.
Commit 49431af6c4ef incorrectly assumes that the GSO path is only used
by HW offload, but it's also useful for SW crypto.
This patch re-enables GSO for SW crypto. It's not an exact revert to
preserve the other changes made to xfrm_dev_offload_ok afterwards, but
it reverts all of its effects.
While reverting commit f75a2804da39 ("xfrm: destroy xfrm_state
synchronously on net exit path"), I incorrectly changed
xfrm_state_flush's "proto" argument back to IPSEC_PROTO_ANY. This
reverts some of the changes in commit dbb2483b2a46 ("xfrm: clean up
xfrm protocol checks"), and leads to some states not being removed
when we exit the netns.
Pass 0 instead of IPSEC_PROTO_ANY from both xfrm_state_fini
xfrm6_tunnel_net_exit, so that xfrm_state_flush deletes all states.
smaps_hugetlb_range() handles the pte without holdling ptl, and may be
concurrenct with migration, leaing to BUG_ON in pfn_swap_entry_to_page().
The race is as follows.
As soon as we'd inserted a file reference into descriptor table, another
thread could close it. That's fine for the case when all we are doing is
returning that descriptor to userland (it's a race, but it's a userland
race and there's nothing the kernel can do about it). However, if we
follow fd_install() with any kind of access to objects that would be
destroyed on close (be it the struct file itself or anything destroyed
by its ->release()), we have a UAF.
dma_buf_fd() is a combination of reserving a descriptor and fd_install().
habanalabs export_dmabuf() calls it and then proceeds to access the
objects destroyed on close. In particular, it grabs an extra reference to
another struct file that will be dropped as part of ->release() for ours;
that "will be" is actually "might have already been".
Fix that by reserving descriptor before anything else and do fd_install()
only when everything had been set up. As a side benefit, we no longer
have the failure exit with file already created, but reference to
underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet;
unlike dma_buf_fd(), fd_install() can't fail.
Fixes: db1a8dd916aa ("habanalabs: add support for dma-buf exporter") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
We already called ib_drain_qp() before and that makes sure
send_done() was called with IB_WC_WR_FLUSH_ERR, but
didn't called atomic_dec_and_test(&sc->send_io.pending.count)
So we may never reach the info->send_pending == 0 condition.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 5349ae5e05fa ("smb: client: let send_done() cleanup before calling smbd_disconnect_rdma_connection()") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should call ib_dma_unmap_single() and mempool_free() before calling
smbd_disconnect_rdma_connection().
And smbd_disconnect_rdma_connection() needs to be the last function to
call as all other state might already be gone after it returns.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The charge-control subsystem in the ChromeOS EC is not strictly tied to
its USB-PD subsystem.
Since commit 7613bc0d116a ("mfd: cros_ec: Don't load charger with UCSI")
the presence of EC_FEATURE_UCSI_PPM would inhibit the probing of the
charge-control driver.
Furthermore recent versions of the EC firmware in Framework laptops
hard-disable EC_FEATURE_USB_PD to avoid probing cros-usbpd-charger,
which then also breaks cros-charge-control.
Since these values can be large, the multiplication may exceed the
maximum value of an int (INT_MAX) and overflow (Our platform did),
leading to an incorrect adist.
User-visible impact:
The memory tiering subsystem will misinterpret slow memory (like CXL)
as faster than DRAM, causing inappropriate demotion of pages from
CXL (slow memory) to DRAM (fast memory).
For example, we will see the following demotion chains from the dmesg, where
Node0,1 are DRAM, and Node2,3 are CXL node:
Demotion targets for Node 0: null
Demotion targets for Node 1: null
Demotion targets for Node 2: preferred: 0-1, fallback: 0-1
Demotion targets for Node 3: preferred: 0-1, fallback: 0-1
Change MEMTIER_ADISTANCE_DRAM to be a long constant by writing it with
the 'L' suffix. This prevents the overflow because the multiplication
will then be done in the long type which has a larger range.
Link: https://lkml.kernel.org/r/20250611023439.2845785-1-lizhijian@fujitsu.com Link: https://lkml.kernel.org/r/20250610062751.2365436-1-lizhijian@fujitsu.com Fixes: 3718c02dbd4c ("acpi, hmat: calculate abstract distance with HMAT") Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com> Acked-by: Balbir Singh <balbirs@nvidia.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
REQ_OP_ZONE_FINISH is defined as "12", which makes
op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a
zone finish operation is an operation that modifies a zone (transition
it to full) and so should be considered as a write operation (albeit
one that does not transfer any data to the device).
Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and
redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential
odd numbers from that new value.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250625093327.548866-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application") Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that the ECDT table inside the ThinkBook 14 G7 IML
contains a valid EC description but an invalid ID string
("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid
ID string prevents the kernel from detecting the built-in touchpad,
so relax the sanity check of the ID string and only reject ECDTs
with empty ID strings.
Reported-by: Ilya K <me@0upti.me> Fixes: 7a0d59f6a913 ("ACPI: EC: Ignore ECDT tables with an invalid ID string") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Ilya K <me@0upti.me> Link: https://patch.msgid.link/20250729062038.303734-1-W_Armin@gmx.de Cc: 6.16+ <stable@vger.kernel.org> # 6.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci_bridge_d3_possible() is called from both pcie_portdrv_probe() and
pcie_portdrv_remove() to determine whether runtime power management shall
be enabled (on probe) or disabled (on remove) on a PCIe port.
The underlying assumption is that pci_bridge_d3_possible() always returns
the same value, else a runtime PM reference imbalance would occur. That
assumption is not given if the PCIe port is inaccessible on remove due to
hot-unplug: pci_bridge_d3_possible() calls pciehp_is_native(), which
accesses Config Space to determine whether the port is Hot-Plug Capable.
An inaccessible port returns "all ones", which is converted to "all
zeroes" by pcie_capability_read_dword(). Hence the port no longer seems
Hot-Plug Capable on remove even though it was on probe.
The resulting runtime PM ref imbalance causes warning messages such as:
Avoid the Config Space access (and thus the runtime PM ref imbalance) by
caching the Hot-Plug Capable bit in struct pci_dev.
The struct already contains an "is_hotplug_bridge" flag, which however is
not only set on Hot-Plug Capable PCIe ports, but also Conventional PCI
Hot-Plug bridges and ACPI slots. The flag identifies bridges which are
allocated additional MMIO and bus number resources to allow for hierarchy
expansion.
The kernel is somewhat sloppily using "is_hotplug_bridge" in a number of
places to identify Hot-Plug Capable PCIe ports, even though the flag
encompasses other devices. Subsequent commits replace these occurrences
with the new flag to clearly delineate Hot-Plug Capable PCIe ports from
other kinds of hotplug bridges.
Document the existing "is_hotplug_bridge" and the new "is_pciehp" flag
and document the (non-obvious) requirement that pci_bridge_d3_possible()
always returns the same value across the entire lifetime of a bridge,
including its hot-removal.
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier") Signed-off-by: Jiayi Li <lijiayi@kylinos.cn> Link: https://patch.msgid.link/20250721032606.3459369-1-lijiayi@kylinos.cn
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ] Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 2d8b39a62a5d ACPI: processor: Avoid NULL pointer dereferences at init time Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 3000ce3c52f8 cpufreq: Use per-policy frequency QoS Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: a1bb46c36ce3 ACPI: processor: Add QoS requests for all CPUs Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _CRS resources in many cases want to have ResourceSource field
to be a type of ACPI String. This means that to compile properly
we need to enclosure the name path into double quotes. This will
in practice defer the interpretation to a run-time stage, However,
this may be interpreted differently on different OSes and ACPI
interpreter implementations. In particular ACPICA might not correctly
recognize the leading '^' (caret) character and will not resolve
the relative name path properly. On top of that, this piece may be
used in SSDTs which are loaded after the DSDT and on itself may also
not resolve relative name paths outside of their own scopes.
With this all said, fix documentation to use fully-qualified name
paths always to avoid any misinterpretations, which is proven to
work.
Fixes: 8eb5c87a92c0 ("i2c: add ACPI support for I2C mux ports") Reported-by: Yevhen Kondrashyn <e.kondrashyn@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250710170225.961303-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa424 ("get rid of NR_OPEN and introduce a sysctl_nr_open") Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Restore the len >= 288 condition on using the AVX implementation, which
was incidentally removed by commit 318c53ae02f2 ("crypto: x86/poly1305 -
Add block-only interface"). This check took into account the overhead
in key power computation, kernel-mode "FPU", and tail handling
associated with the AVX code. Indeed, restoring this check slightly
improves performance for len < 256 as measured using poly1305_kunit on
an "AMD Ryzen AI 9 365" (Zen 5) CPU:
While the optimal threshold for this CPU might be slightly lower than
288 (see the len == 256 case), other CPUs would need to be tested too,
and these sorts of benchmarks can underestimate the true cost of
kernel-mode "FPU". Therefore, for now just restore the 288 threshold.
Restore the SIMD usability check and base conversion that were removed
by commit 318c53ae02f2 ("crypto: x86/poly1305 - Add block-only
interface").
This safety check is cheap and is well worth eliminating a footgun.
While the Poly1305 functions should not be called when SIMD registers
are unusable, if they are anyway, they should just do the right thing
instead of corrupting random tasks' registers and/or computing incorrect
MACs. Fixing this is also needed for poly1305_kunit to pass.
Just use irq_fpu_usable() instead of the original crypto_simd_usable(),
since poly1305_kunit won't rely on crypto_simd_disabled_for_test.
Make fscrypt no longer use Crypto API drivers for non-inline crypto
engines, even when the Crypto API prioritizes them over CPU-based code
(which unfortunately it often does). These drivers tend to be really
problematic, especially for fscrypt's workload. This commit has no
effect on inline crypto engines, which are different and do work well.
Specifically, exclude drivers that have CRYPTO_ALG_KERN_DRIVER_ONLY or
CRYPTO_ALG_ALLOCATES_MEMORY set. (Later, CRYPTO_ALG_ASYNC should be
excluded too. That's omitted for now to keep this commit backportable,
since until recently some CPU-based code had CRYPTO_ALG_ASYNC set.)
There are two major issues with these drivers: bugs and performance.
First, these drivers tend to be buggy. They're fundamentally much more
error-prone and harder to test than the CPU-based code. They often
don't get tested before kernel releases, and even if they do, the crypto
self-tests don't properly test these drivers. Released drivers have
en/decrypted or hashed data incorrectly. These bugs cause issues for
fscrypt users who often didn't even want to use these drivers, e.g.:
These drivers have also similarly caused issues for dm-crypt users,
including data corruption and deadlocks. Since Linux v5.10, dm-crypt
has disabled most of them by excluding CRYPTO_ALG_ALLOCATES_MEMORY.
Second, these drivers tend to be *much* slower than the CPU-based code.
This may seem counterintuitive, but benchmarks clearly show it. There's
a *lot* of overhead associated with going to a hardware driver, off the
CPU, and back again. To prove this, I gathered as many systems with
this type of crypto engine as I could, and I measured synchronous
encryption of 4096-byte messages (which matches fscrypt's workload):
So, there was no case in which the crypto engine was even *close* to
being faster. On the first three, which have AES instructions in the
CPU, the CPU was 30 to 55 times faster (!). Even on STM32MP157F-DK2
which has a Cortex-A7 CPU that doesn't have AES instructions, AES was
over 4 times faster on the CPU. And Adiantum encryption, which is what
actually should be used on CPUs like that, was over 17 times faster.
Other justifications that have been given for these non-inline crypto
engines (almost always coming from the hardware vendors, not actual
users) don't seem very plausible either:
- The crypto engine throughput could be improved by processing
multiple requests concurrently. Currently irrelevant to fscrypt,
since it doesn't do that. This would also be complex, and unhelpful
in many cases. 2 of the 4 engines I tested even had only one queue.
- Some of the engines, e.g. STM32, support hardware keys. Also
currently irrelevant to fscrypt, since it doesn't support these.
Interestingly, the STM32 driver itself doesn't support this either.
- Free up CPU for other tasks and/or reduce energy usage. Not very
plausible considering the "short" message length, driver overhead,
and scheduling overhead. There's just very little time for the CPU
to do something else like run another task or enter low-power state,
before the message finishes and it's time to process the next one.
- Some of these engines resist power analysis and electromagnetic
attacks, while the CPU-based crypto generally does not. In theory,
this sounds great. In practice, if this benefit requires the use of
an off-CPU offload that massively regresses performance and has a
low-quality, buggy driver, the price for this hardening (which is
not relevant to most fscrypt users, and tends to be incomplete) is
just too high. Inline crypto engines are much more promising here,
as are on-CPU solutions like RISC-V High Assurance Cryptography.
Using device_find_child() to locate a probed virtual-device-port node
causes a device refcount imbalance, as device_find_child() internally
calls get_device() to increment the device’s reference count before
returning its pointer. vdc_port_mpgroup_check() directly returns true
upon finding a matching device without releasing the reference via
put_device(). We should call put_device() to decrement refcount.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 3ee70591d6c4 ("sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://lore.kernel.org/r/20250719075856.3447953-1-make24@iscas.ac.cn Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO") 691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO") 2ff906994b6c ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO") 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
In init_cpu_fullname(), a constant pointer to "model" property is
retrieved. It's later modified by the strsep() function, which is
illegal and corrupts kernel's FDT copy. This is shown by dmesg,
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
Create a mutable copy of the model property and do in-place operations
on the mutable copy instead. loongson_sysconf.cpuname lives across the
kernel lifetime, thus manually releasing isn't necessary.
Also move the of_node_put() call for the root node after the usage of
its property, since of_node_put() decreases the reference counter thus
usage after the call is unsafe.
Cc: stable@vger.kernel.org Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS") Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now relocate_new_kernel_size is a .long value, which means 32bit, so its
high 32bit is undefined. This causes memcpy((void *)reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size) in machine_kexec_prepare()
access out of range memories in some cases, and then end up with an ADE
exception.
So make relocate_new_kernel_size be a .quad value, which means 64bit, to
avoid such errors.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by
"#define jmp_offset (out_offset - (cur_offset))"
is a negative number, which is wrong. The final generated assembly are
as follow.
Like s390 and the jailhouse hypervisor, LoongArch's PCI architecture allows
passing isolated PCI functions to a guest OS instance. So it is possible
that there is a multi-function device without function 0 for the host or
guest.
Allow probing such functions by adding a IS_ENABLED(CONFIG_LOONGARCH) case
in the hypervisor_isolated_pci_functions() helper.
This is similar to commit 189c6c33ff42 ("PCI: Extend isolated function
probing to s390").
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com> Fixes: c44c5eeb2c02 ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR") Cc: stable@vger.kernel.org Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com> Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/ Fixes: d20c11d86d8f ("nfsd: Protect session creation and client confirm using client_lock") Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently FILEID_IS_DIR is raised in fh_flags which is wrong.
Raise it in handle->handle_type were it's supposed to be.
Link: https://lore.kernel.org/20250624-work-pidfs-fhandle-v2-1-d02a04858fe3@kernel.org Fixes: c374196b2b9f ("fs: name_to_handle_at() support for "explicit connectable" file handles") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Cc: stable@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.
Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Cc: stable@vger.kernel.org # 6.6 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference count to the WED devices has already been incremented when
looking them up using of_find_device_by_node() so drop the bogus
additional reference taken during probe.
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Cc: stable@vger.kernel.org # 5.19 Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-5-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the references to the IERB OF node and platform device
taken by of_parse_phandle() and of_find_device_by_node() during probe.
Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block") Cc: stable@vger.kernel.org # 5.13 Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-3-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814
phy") introduced cable_test support for the LAN8814 that reuses parts of
the KSZ886x logic and introduced the cable_diag_reg and pair_mask
parameters to account for differences between those chips.
However, it did not update the ksz8081_type struct, so those members are
now 0, causing no pairs to be tested in ksz886x_cable_test_get_status
and ksz886x_cable_test_wait_for_completion to poll the wrong register
for the affected PHYs (Basic Control/Reset, which is 0 in normal
operation) and exit immediately.
Fix this by setting both struct members accordingly.
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
While .led_blink_set() would previously put an LED into an unconditional
permanently blinking state, the offending commit now uses same operation
to (also?) set the blink timing of the netdev trigger when offloading.
This breaks many if not all of the existing PHY drivers which offer
offloading LED operations, as those drivers would just put the LED into
blinking state after .led_blink_set() has been called.
Unfortunately the change even made it into stable kernels for unknown
reasons, so it should be reverted there as well.
Driver in probe() updates each of 'reg_field' with 'reg_base':
for (i = 0; i < REG_MAX_COUNT; i++)
regs[i].reg += reg_base;
'reg_field' array (under variable 'regs' above) is statically allocated,
thus each re-bind would add another 'reg_base' leading to bogus
register addresses. Constify the local 'reg_field' array and duplicate
it in probe to solve this.
Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250529063335.8785-2-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Cc: stable@vger.kernel.org Fixes: 10af0273a35a ("gpio: mlxbf3: only get IRQ for device instance 0") Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 20117cf426b6 ("gpio: pxa: Make irq_chip immutableas")
as it caused a regression on samsung coreprimevelte and we've not been
able to fix it so far.
The gpio-mlxbf2 driver interfaces with four GPIO controllers,
device instances 0-3. There are two IRQ resources shared between
the four controllers, and they are found in the ACPI table for
instances 0 and 3. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instances 1 and 2:
mlxbf2_gpio MLNXBF22:01: error -ENXIO: IRQ index 0 not found
According to the "GPIO Expander Map / Table" section of the J722S EVM
Schematic within the Evaluation Module Design Files package [0], the
GPIO Pin P05 located on the GPIO Expander 1 (I2C0/0x23) has to be pulled
down to select the Type-C interface. Since commit under Fixes claims to
enable the Type-C interface, update the property within "p05-hog" from
"output-high" to "output-low", thereby switching from the Type-A
interface to the Type-C interface.
[0]: https://www.ti.com/lit/zip/sprr495
Cc: stable@vger.kernel.org Fixes: 485705df5d5f ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20250623100657.4082031-1-s-vadapalli@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quote from the virtio specification chapter 4.2.2.2:
"For the device-specific configuration space, the driver MUST use 8 bit
wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses
for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and
64 bit wide fields."
Commit 34331d7beed7 ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.
The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.
Additionally, commit 266b5d02e14f ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.
Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.
Fixes: 266b5d02e14f ("smb: client: fix race condition in negotiate timeout by using more precise timing") Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Ring provided buffers are potentially only valid within the single
execution context in which they were acquired. io_uring deals with this
and invalidates them on retry. But on the networking side, if
MSG_WAITALL is set, or if the socket is of the streaming type and too
little was processed, then it will hang on to the buffer rather than
recycle or commit it. This is problematic for two reasons:
1) If someone unregisters the provided buffer ring before a later retry,
then the req->buf_list will no longer be valid.
2) If multiple sockers are using the same buffer group, then multiple
receives can consume the same memory. This can cause data corruption
in the application, as either receive could land in the same
userspace buffer.
Fix this by disallowing partial retries from pinning a provided buffer
across multiple executions, if ring provided buffers are used.
Cc: stable@vger.kernel.org Reported-by: pt x <superman.xpt@gmail.com> Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring") Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the allocated size exceeds UINT_MAX, then it's necessary to cast
the mr->nr_pages value to size_t to prevent it from overflowing. In
practice this isn't much of a concern as the required memory size will
have been validated upfront, and accounted to the user. And > 4GB sizes
will be necessary to make the lack of a cast a problem, which greatly
exceeds normal user locked_vm settings that are generally in the kb to
mb range. However, if root is used, then accounting isn't done, and
then it's possible to hit this issue.
zcrx areas can be quite large and need to be accounted and checked
against RLIMIT_MEMLOCK. In practise it shouldn't be a big issue as
the inteface already requires cap_net_admin.
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
As station, WCN7850 firmware requires pairwise key to be installed before
group key. Currently host does not care about this, so it is up to kernel
or userspace to decide which one will be installed first. In case above
requirement is not met, WCN7850 firmware's EAPOL station machine is messed
up, and finally connection fails [1].
Reorder key install for station interface in that case: this is done by
caching group key first; Later when pairwise key arrives, both can be
installed in required order.
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Currently, the battery timer is set up for all devices using hid-apple,
irrespective of whether they actually have a battery or not.
APPLE_RDESC_BATTERY is a quirk that indicates the device has a battery
and needs the battery timer. This patch checks for this quirk before
setting up the timer, ensuring that only devices with a battery will
have the timer set up.
Currently, the battery timer is set up for all devices using
hid-magicmouse, irrespective of whether they actually need it or not.
The current implementation requires the battery timer for Magic Mouse 2
and Magic Trackpad 2 when connected via USB only. Add checks to ensure
that the battery timer is only set up when they are connected via USB.
Testing by the syzbot fuzzer showed that the HID core gets a
shift-out-of-bounds exception when it tries to convert a 32-bit
quantity to a 0-bit quantity. Ideally this should never occur, but
there are buggy devices and some might have a report field with size
set to zero; we shouldn't reject the report or the device just because
of that.
Instead, harden the s32ton() routine so that it returns a reasonable
result instead of crashing when it is called with the number of bits
set to 0 -- the same as what snto32() does.
In hidg_bind(), if alloc_workqueue() fails after usb_assign_descriptors()
has successfully allocated the USB descriptors, the current error handling
does not call usb_free_all_descriptors() to free the allocated descriptors,
resulting in a memory leak.
Restructure the error handling by adding proper cleanup labels:
- fail_free_all: cleans up workqueue and descriptors
- fail_free_descs: cleans up descriptors only
- fail: original cleanup for earlier failures
This ensures that allocated resources are properly freed in reverse order
of their allocation, preventing the memory leak when alloc_workqueue() fails.
A malicious HID device with quirk APPLE_MAGIC_BACKLIGHT can trigger a NULL
pointer dereference whilst the power feature-report is toggled and sent to
the device in apple_magic_backlight_report_set(). The power feature-report
is expected to have two data fields, but if the descriptor declares one
field then accessing field[1] and dereferencing it in
apple_magic_backlight_report_set() becomes invalid
since field[1] will be NULL.
An example of a minimal descriptor which can cause the crash is something
like the following where the report with ID 3 (power report) only
references a single 1-byte field. When hid core parses the descriptor it
will encounter the final feature tag, allocate a hid_report (all members
of field[] will be zeroed out), create field structure and populate it,
increasing the maxfield to 1. The subsequent field[1] access and
dereference causes the crash.
Usage Page (Vendor Defined 0xFF00)
Usage (0x0F)
Collection (Application)
Report ID (1)
Usage (0x01)
Logical Minimum (0)
Logical Maximum (255)
Report Size (8)
Report Count (1)
Feature (Data,Var,Abs)
To fix this issue we should validate the number of fields that the
backlight and power reports have and if they do not have the required
number of fields then bail.
Fixes: 394ba612f941 ("HID: apple: Add support for magic keyboard backlight on T2 Macs") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Orlando Chamberlain <orlandoch.dev@gmail.com> Tested-by: Aditya Garg <gargaditya08@live.com> Link: https://patch.msgid.link/20250713233008.15131-1-qasdev00@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ti_csi2rx_start_dma() fails in ti_csi2rx_dma_callback(), the buffer is
marked done with VB2_BUF_STATE_ERROR but is not removed from the DMA queue.
This causes the same buffer to be retried in the next iteration, resulting
in a double list_del() and eventual list corruption.
Fix this by removing the buffer from the queue before calling
vb2_buffer_done() on error.
Fix NULL pointer crash in uvcg_framebased_make due to uninitialized color
matching descriptor for frame-based format which was added in
commit f5e7bdd34aca ("usb: gadget: uvc: Allow creating new color matching
descriptors") that added handling for uncompressed and mjpeg format.
Crash is seen when userspace configuration (via configfs) does not
explicitly define the color matching descriptor. If color_matching is not
found, config_group_find_item() returns NULL. The code then jumps to
out_put_cm, where it calls config_item_put(color_matching);. If
color_matching is NULL, this will dereference a null pointer, leading to a
crash.
Initialize color matching descriptor for frame-based format to prevent
NULL pointer crash by mirroring the handling done for uncompressed and
mjpeg formats.
After commit acd7ccb284b8 ("mm: shmem: add large folio support for
tmpfs"), we extend the 'huge=' option to allow any sized large folios for
tmpfs, which means tmpfs will allow getting a highest order hint based on
the size of write() and fallocate() paths, and then will try each
allowable large order.
However, when the i915 driver allocates shmem memory, it doesn't provide
hint information about the size of the large folio to be allocated,
resulting in the inability to allocate PMD-sized shmem, which in turn
affects GPU performance.
Patryk added:
: In my tests, the performance drop ranges from a few percent up to 13%
: in Unigine Superposition under heavy memory usage on the CPU Core Ultra
: 155H with the Xe 128 EU GPU. Other users have reported performance
: impact up to 30% on certain workloads. Please find more in the
: regressions reports:
: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14645
: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13845
:
: I believe the change should be backported to all active kernel branches
: after version 6.12.
To fix this issue, we can use the inode's size as a write size hint in
shmem_read_folio_gfp() to help allocate PMD-sized large folios.
Link: https://lkml.kernel.org/r/f7e64e99a3a87a8144cc6b2f1dddf7a89c12ce44.1753926601.git.baolin.wang@linux.alibaba.com Fixes: acd7ccb284b8 ("mm: shmem: add large folio support for tmpfs") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reported-by: Patryk Kowalczyk <patryk@kowalczyk.ws> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Patryk Kowalczyk <patryk@kowalczyk.ws> Suggested-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "Some randome fixes and cleanups to swapfile".
Patch 0-3 are some random fixes. Patch 4 is a cleanup. More details can
be found in respective patches.
This patch (of 4):
When folio_alloc_swap() encounters a failure in either
mem_cgroup_try_charge_swap() or add_to_swap_cache(), nr_swap_pages counter
is not decremented for allocated entry. However, the following
put_swap_folio() will increase nr_swap_pages counter unpairly and lead to
an imbalance.
Move nr_swap_pages decrement from folio_alloc_swap() to swap_range_alloc()
to pair the nr_swap_pages counting.
In setup_swap_map(), we only ensure badpages are in range (0, last_page].
As maxpages might be < last_page, setup_clusters() will encounter a buffer
overflow when a badpage is >= maxpages.
Only call inc_cluster_info_page() for badpage which is < maxpages to fix
the issue.
Link: https://lkml.kernel.org/r/20250522122554.12209-4-shikemeng@huaweicloud.com Fixes: b843786b0bd0 ("mm: swapfile: fix SSD detection with swapfile on btrfs") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use maxpages from read_swap_header() to initialize swap_info_struct,
however the maxpages might be reduced in setup_swap_extents() and the
si->max is assigned with the reduced maxpages from the
setup_swap_extents().
Obviously, this could lead to memory waste as we allocated memory based on
larger maxpages, besides, this could lead to a potential deadloop as
following:
1) When calling setup_clusters() with larger maxpages, unavailable
pages within range [si->max, larger maxpages) are not accounted with
inc_cluster_info_page(). As a result, these pages are assumed
available but can not be allocated. The cluster contains these pages
can be moved to frag_clusters list after it's all available pages were
allocated.
2) When the cluster mentioned in 1) is the only cluster in
frag_clusters list, cluster_alloc_swap_entry() assume order 0
allocation will never failed and will enter a deadloop by keep trying
to allocate page from the only cluster in frag_clusters which contains
no actually available page.
Call setup_swap_extents() to get the final maxpages before
swap_info_struct initialization to fix the issue.
After this change, span will include badblocks and will become large
value which I think is correct value:
In summary, there are two kinds of swapfile_activate operations.
1. Filesystem style: Treat all blocks logical continuity and find
usable physical extents in logical range. In this way, si->pages will
be actual usable physical blocks and span will be "1 + highest_block -
lowest_block".
2. Block device style: Treat all blocks physically continue and only
one single extent is added. In this way, si->pages will be si->max and
span will be "si->pages - 1". Actually, si->pages and si->max is only
used in block device style and span value is set with si->pages. As a
result, span value in block device style will become a larger value as
you mentioned.
I think larger value is correct based on:
1. Span value in filesystem style is "1 + highest_block -
lowest_block" which is the range cover all possible phisical blocks
including the badblocks.
2. For block device style, si->pages is the actual usable block number
and is already in pr_info. The original span value before this patch
is also refer to usable block number which is redundant in pr_info.
Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.
Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.
Cc: stable@kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing
page") added a warning to pte_free_defer(), on our request. It was meant
to warn if this would ever be reached for KVM guest mappings, because
the page table would be freed w/o a gmap_unlink(). THP mappings are not
allowed for KVM guests on s390, so this should never happen.
However, it is possible that the warning is triggered in a valid case as
false-positive.
s390_enable_sie() takes the mmap_lock, marks all VMAs as VM_NOHUGEPAGE and
splits possibly existing THP guest mappings. mm->context.has_pgste is set
to 1 before that, to prevent races with the mm_has_pgste() check in
MADV_HUGEPAGE.
khugepaged drops the mmap_lock for file mappings and might run in parallel,
before a vma is marked VM_NOHUGEPAGE, but after mm->context.has_pgste was
set to 1. If it finds file mappings to collapse, it will eventually call
pte_free_defer(). This will trigger the warning, but it is a valid case
because gmap is not yet set up, and the THP mappings will be split again.
When a zoned loop device, or zloop device, is removed, KASAN enabled
kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The
BUG happens because zloop_ctl_remove() calls put_disk(), which invokes
zloop_free_disk(). The zloop_free_disk() frees the memory allocated for
the zlo pointer. However, after the memory is freed, zloop_ctl_remove()
calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo.
Hence the KASAN use-after-free.
To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set)
from zloop_ctl_remove() into zloop_free_disk(). This ensures that
the tag_set is freed before the call to kvfree(zlo).
Most HCR_EL2 bits are not supposed to affect EL2 at all, but only
the guest. However, we gladly merge these bits with the host's
HCR_EL2 configuration, irrespective of entering L1 or L2.
This leads to some funky behaviour, such as L1 trying to inject
a virtual SError for L2, and getting a taste of its own medecine.
Not quite what the architecture anticipated.
In the end, the only bits that matter are those we have defined as
invariants, either because we've made them RESx (E2H, HCD...), or
that we actively refuse to merge because the mess with KVM's own
logic.
Use the sanitisation infrastructure to get the RES1 bits, and let
things rip in a safer way.
Fixes: 04ab519bb86df ("KVM: arm64: nv: Configure HCR_EL2 for FEAT_NV2") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250721101955.535159-3-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Brown reports that since we commit to making exceptions
visible without the vcpu being loaded, the external abort selftest
fails.
Upon investigation, it turns out that the code that makes registers
affected by an exception visible to the guest is completely broken
on VHE, as we don't check whether the system registers are loaded
on the CPU at this point. We managed to get away with this so far,
but that's obviously as bad as it gets,
Add the required checksm and document the absolute need to check
for the SYSREGS_ON_CPU flag before calling into any of the
__vcpu_write_sys_reg_to_cpu()__vcpu_read_sys_reg_from_cpu() helpers.
Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the
guest CPUID model, as debug support is supposed to be available if RTM is
supported, and there are no known downsides to letting the guest debug RTM
aborts.
Note, there are no known bug reports related to RTM_DEBUG, the primary
motivation is to reduce the probability of breaking existing guests when a
future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL
(KVM currently lets L2 run with whatever hardware supports; whoops).
Note #2, KVM already emulates DR6.RTM, and doesn't restrict access to
DR7.RTM.
Fixes: 83c529151ab0 ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250610232010.162191-5-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instruct vendor code to load the guest's DR6 into hardware via a new
KVM_RUN flag, and remove kvm_x86_ops.set_dr6(), whose sole purpose was to
load vcpu->arch.dr6 into hardware when DR6 can be read/written directly
by the guest.
Note, TDX already WARNs on any run_flag being set, i.e. will yell if KVM
thinks DR6 needs to be reloaded. TDX vCPUs force KVM_DEBUGREG_AUTO_SWITCH
and never clear the flag, i.e. should never observe KVM_RUN_LOAD_GUEST_DR6.
Convert kvm_x86_ops.vcpu_run()'s "force_immediate_exit" boolean parameter
into an a generic bitmap so that similar "take action" information can be
passed to vendor code without creating a pile of boolean parameters.
This will allow dropping kvm_x86_ops.set_dr6() in favor of a new flag, and
will also allow for adding similar functionality for re-loading debugctl
in the active VMCS.
Opportunistically massage the TDX WARN and comment to prepare for adding
more run_flags, all of which are expected to be mutually exclusive with
TDX, i.e. should be WARNed on.
Right now, if XRSTOR fails a console message like this is be printed:
Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers.
However, the text location (...+0x9a in this case) is the instruction
*AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump
also points one instruction late.
The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and
keep on running after returning from the #GP handler. But it does this
fixup before warning.
The resulting warning output is nonsensical because it looks like the
non-FPU-related instruction is #GP'ing.
Do not fix up RIP until after printing the warning. Do this by using
the more generic and standard ex_handler_default().
Fixes: d5c8028b4788 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Acked-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.
This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e162b
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org Fixes: 75b1a8f9d62e ("ALSA: Convert strlcpy to strscpy when return value is unused") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.
CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that,
when set, indicates that the software mitigation for this vulnerability is
not needed.
Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest
is vulnerable.
Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
