Syzbot came up with a reproducer where a loop device block size is
changed underneath a mounted filesystem. This causes a mismatch between
the block device block size and the block size stored in the superblock
causing confusion in various places such as fs/buffer.c. The particular
issue triggered by syzbot was a warning in __getblk_slow() due to
requested buffer size not matching block device block size.
Fix the problem by getting exclusive hold of the loop device to change
its block size. This fails if somebody (such as filesystem) has already
an exclusive ownership of the block device and thus prevents modifying
the loop device under some exclusive owner which doesn't expect it.
Reported-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+01ef7a8da81a975e1ccd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20250711163202.19623-2-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to
->writepage") that occurs in various xfstests, causing "something found
in dmesg" failures.
[ 341.136573] gfs2_meta_aops does not implement migrate_folio
[ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300
Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'.
Reported-by: syzbot+4708579bb230a0582a57@syzkaller.appspotmail.com Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Update the nvme_tcp_start_tls() function to use dev_err() instead of
dev_dbg() when a TLS error is detected. This ensures that handshake
failures are visible by default, aiding in debugging.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Same as done for raid0, set chunk_sectors limit to appropriately set the
atomic write size limit.
Setting chunk_sectors limit in this way overrides the stacked limit
already calculated based on the bottom device limits. This is ok, as
when any bios are sent to the bottom devices, the block layer will still
respect the bottom device chunk_sectors.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20250711105258.3135198-6-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
NVMe devices from multiple vendors appear to get stuck in a reset state
that we can't get out of with an NVMe level Controller Reset. The kernel
would report these with messages that look like:
Device not ready; aborting reset, CSTS=0x1
These have historically required a power cycle to make them usable
again, but in many cases, a PCIe FLR is sufficient to restart operation
without a power cycle. Try it if the initial controller reset fails
during any nvme reset attempt.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
If smb2_create_link() is called with ReplaceIfExists set and the name
does exist then a deadlock will happen.
ksmbd_vfs_kern_path_locked() will return with success and the parent
directory will be locked. ksmbd_vfs_remove_file() will then remove the
file. ksmbd_vfs_link() will then be called while the parent is still
locked. It will try to lock the same parent and will deadlock.
This patch moves the ksmbd_vfs_kern_path_unlock() call to *before*
ksmbd_vfs_link() and then simplifies the code, removing the file_present
flag variable.
Signed-off-by: NeilBrown <neil@brown.name> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Linux IMA (Integrity Measurement Architecture) subsystem used for
secure boot, file integrity, or remote attestation cannot be a loadable
module for few reasons listed below:
o Boot-Time Integrity: IMA’s main role is to measure and appraise files
before they are used. This includes measuring critical system files during
early boot (e.g., init, init scripts, login binaries). If IMA were a
module, it would be loaded too late to cover those.
o TPM Dependency: IMA integrates tightly with the TPM to record
measurements into PCRs. The TPM must be initialized early (ideally before
init_ima()), which aligns with IMA being built-in.
o Security Model: IMA is part of a Trusted Computing Base (TCB). Making it
a module would weaken the security model, as a potentially compromised
system could delay or tamper with its initialization.
IMA must be built-in to ensure it starts measuring from the earliest
possible point in boot which inturn implies TPM must be initialised and
ready to use before IMA.
To enable integration of tpm_event_log with the IMA subsystem, the TPM
drivers (tpm_crb and tpm_crb_ffa) also needs to be built-in. However with
FF-A driver also being initialised at device initcall level, it can lead to
an initialization order issue where:
- crb_acpi_driver_init() may run before tpm_crb_ffa_driver()_init and
ffa_init()
- As a result, probing the TPM device via CRB over FFA is deferred
- ima_init() (called as a late initcall) runs before deferred probe
completes, IMA fails to find the TPM and logs the below error:
| ima: No TPM chip found, activating TPM-bypass!
Eventually it fails to generate boot_aggregate with PCR values.
Because of the above stated dependency, the ffa driver needs to initialised
before tpm_crb_ffa module to ensure IMA finds the TPM successfully when
present.
[ jarkko: reformatted some of the paragraphs because they were going past
the 75 character boundary. ]
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For arm64 this requires forcing one ACPI function to be inlined with
__always_inline.
When the volume header contains erroneous values that do not reflect
the actual state of the filesystem, hfsplus_fill_super() assumes that
the attributes file is not yet created, which later results in hitting
BUG_ON() when hfsplus_create_attributes_file() is called. Replace this
BUG_ON() with -EIO error with a message to suggest running fsck tool.
where HFSPLUS_MAX_STRLEN is 255 bytes. The issue happens if length
of the structure instance has value bigger than 255 (for example,
65283). In such case, pointer on unicode buffer is going beyond of
the allocated memory.
The patch fixes the issue by checking the length value of
hfsplus_unistr instance and using 255 value in the case if length
value is bigger than HFSPLUS_MAX_STRLEN. Potential reason of such
situation could be a corruption of Catalog File b-tree's node.
Reported-by: Wenzhi Wang <wenzhi.wang@uwaterloo.ca> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org Reviewed-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20250710230830.110500-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reason of the issue that code doesn't check the correctness
of the requested offset and length. As a result, incorrect value
of offset or/and length could result in access out of allocated
memory.
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfsplus_bnode_read(), hfsplus_bnode_write(),
hfsplus_bnode_clear(), hfsplus_bnode_copy(), and hfsplus_bnode_move()
with the goal to prevent the access out of allocated memory
and triggering the crash.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn> Reported-by: Jiaji Qin <jjtan24@m.fudan.edu.cn> Reported-by: Shuoran Bai <baishuoran@hrbeu.edu.cn> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Link: https://lore.kernel.org/r/20250703214804.244077-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(),
hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent
the access out of allocated memory and triggering the crash.
res = hfs_find_init(HFS_SB(inode->i_sb)->ext_tree, &fd);
if (!res) {
res = __hfs_ext_cache_extent(&fd, inode, block);
hfs_find_exit(&fd);
}
return res;
}
The problem here that hfs_find_init() is trying to use
HFS_SB(inode->i_sb)->ext_tree that is not initialized yet.
It will be initailized when hfs_btree_open() finishes
the execution.
The patch adds checking of tree pointer in hfs_find_init()
and it reworks the logic of hfs_btree_open() by reading
the b-tree's header directly from the volume. The read_mapping_page()
is exchanged on filemap_grab_folio() that grab the folio from
mapping. Then, sb_bread() extracts the b-tree's header
content and copy it into the folio.
Reported-by: Wenzhi Wang <wenzhi.wang@uwaterloo.ca> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20250710213657.108285-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
The variable ret in icss_iep_extts_enable() was incorrectly declared
as u32, while the function returns int and may return negative error
codes. This will cause sign extension issues and incorrect error
propagation. Update ret to be int to fix error handling.
This change corrects the declaration to avoid potential type mismatch.
When link settings are changed emac->speed is populated by
emac_adjust_link(). The link speed and other settings are then written into
the DRAM. However if both ports are brought down after this and brought up
again or if the operating mode is changed and a firmware reload is needed,
the DRAM is cleared by icssg_config(). As a result the link settings are
lost.
Fix this by calling emac_adjust_link() after icssg_config(). This re
populates the settings in the DRAM after a new firmware load.
There is a reference count leak in ctnetlink_dump_table():
if (res < 0) {
nf_conntrack_get(&ct->ct_general); // HERE
cb->args[1] = (unsigned long)ct;
...
While its very unlikely, its possible that ct == last.
If this happens, then the refcount of ct was already incremented.
This 2nd increment is never undone.
This prevents the conntrack object from being released, which in turn
keeps prevents cnet->count from dropping back to 0.
This will then block the netns dismantle (or conntrack rmmod) as
nf_conntrack_cleanup_net_list() will wait forever.
This can be reproduced by running conntrack_resize.sh selftest in a loop.
It takes ~20 minutes for me on a preemptible kernel on average before
I see a runaway kworker spinning in nf_conntrack_cleanup_net_list.
One fix would to change this to:
if (res < 0) {
if (ct != last)
nf_conntrack_get(&ct->ct_general);
But this reference counting isn't needed in the first place.
We can just store a cookie value instead.
A followup patch will do the same for ctnetlink_exp_dump_table,
it looks to me as if this has the same problem and like
ctnetlink_dump_table, we only need a 'skip hint', not the actual
object so we can apply the same cookie strategy there as well.
Commit b40c5f4fde22 ("udp: disable inner UDP checksum offloads in
IPsec case") tried to fix checksumming in UFO when the packets are
going through IPsec, so that we can't rely on offloads because the UDP
header and payload will be encrypted.
But when doing a TCP test over VXLAN going through IPsec transport
mode with GSO enabled (esp4_offload module loaded), I'm seeing broken
UDP checksums on the encap after successful decryption.
The skbs get to udp4_ufo_fragment/__skb_udp_tunnel_segment via
__dev_queue_xmit -> validate_xmit_skb -> skb_gso_segment and at this
point we've already dropped the dst (unless the device sets
IFF_XMIT_DST_RELEASE, which is not common), so need_ipsec is false and
we proceed with checksum offload.
Make need_ipsec also check the secpath, which is not dropped on this
callpath.
smaps_hugetlb_range() handles the pte without holdling ptl, and may be
concurrenct with migration, leaing to BUG_ON in pfn_swap_entry_to_page().
The race is as follows.
As soon as we'd inserted a file reference into descriptor table, another
thread could close it. That's fine for the case when all we are doing is
returning that descriptor to userland (it's a race, but it's a userland
race and there's nothing the kernel can do about it). However, if we
follow fd_install() with any kind of access to objects that would be
destroyed on close (be it the struct file itself or anything destroyed
by its ->release()), we have a UAF.
dma_buf_fd() is a combination of reserving a descriptor and fd_install().
habanalabs export_dmabuf() calls it and then proceeds to access the
objects destroyed on close. In particular, it grabs an extra reference to
another struct file that will be dropped as part of ->release() for ours;
that "will be" is actually "might have already been".
Fix that by reserving descriptor before anything else and do fd_install()
only when everything had been set up. As a side benefit, we no longer
have the failure exit with file already created, but reference to
underlying file (as well as ->dmabuf_export_cnt, etc.) not grabbed yet;
unlike dma_buf_fd(), fd_install() can't fail.
Fixes: db1a8dd916aa ("habanalabs: add support for dma-buf exporter") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set/clear DEBUGCTLMSR_FREEZE_IN_SMM in GUEST_IA32_DEBUGCTL based on the
host's pre-VM-Enter value, i.e. preserve the host's FREEZE_IN_SMM setting
while running the guest. When running with the "default treatment of SMIs"
in effect (the only mode KVM supports), SMIs do not generate a VM-Exit that
is visible to host (non-SMM) software, and instead transitions directly
from VMX non-root to SMM. And critically, DEBUGCTL isn't context switched
by hardware on SMI or RSM, i.e. SMM will run with whatever value was
resident in hardware at the time of the SMI.
Failure to preserve FREEZE_IN_SMM results in the PMU unexpectedly counting
events while the CPU is executing in SMM, which can pollute profiling and
potentially leak information into the guest.
Check for changes in FREEZE_IN_SMM prior to every entry into KVM's inner
run loop, as the bit can be toggled in IRQ context via IPI callback (SMP
function call), by way of /sys/devices/cpu/freeze_on_smi.
Add a field in kvm_x86_ops to communicate which DEBUGCTL bits need to be
preserved, as FREEZE_IN_SMM is only supported and defined for Intel CPUs,
i.e. explicitly checking FREEZE_IN_SMM in common x86 is at best weird, and
at worst could lead to undesirable behavior in the future if AMD CPUs ever
happened to pick up a collision with the bit.
Exempt TDX vCPUs, i.e. protected guests, from the check, as the TDX Module
owns and controls GUEST_IA32_DEBUGCTL.
WARN in SVM if KVM_RUN_LOAD_DEBUGCTL is set, mostly to document that the
lack of handling isn't a KVM bug (TDX already WARNs on any run_flag).
Lastly, explicitly reload GUEST_IA32_DEBUGCTL on a VM-Fail that is missed
by KVM but detected by hardware, i.e. in nested_vmx_restore_host_state().
Doing so avoids the need to track host_debugctl on a per-VMCS basis, as
GUEST_IA32_DEBUGCTL is unconditionally written by prepare_vmcs02() and
load_vmcs12_host_state(). For the VM-Fail case, even though KVM won't
have actually entered the guest, vcpu_enter_guest() will have run with
vmcs02 active and thus could result in vmcs01 being run with a stale value.
Cc: stable@vger.kernel.org Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20250610232010.162191-9-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
[sean: resolve syntactic conflict in vt_x86_ops definition] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Introduce vmx_guest_debugctl_{read,write}() to handle all accesses to
vmcs.GUEST_IA32_DEBUGCTL. This will allow stuffing FREEZE_IN_SMM into
GUEST_IA32_DEBUGCTL based on the host setting without bleeding the state
into the guest, and without needing to copy+paste the FREEZE_IN_SMM
logic into every patch that accesses GUEST_IA32_DEBUGCTL.
No functional change intended.
Cc: stable@vger.kernel.org Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: massage changelog, make inline, use in all prepare_vmcs02() cases] Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Link: https://lore.kernel.org/r/20250610232010.162191-8-seanjc@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a consistency check for L2's guest_ia32_debugctl, as KVM only supports
a subset of hardware functionality, i.e. KVM can't rely on hardware to
detect illegal/unsupported values. Failure to check the vmcs12 value
would allow the guest to load any harware-supported value while running L2.
Take care to exempt BTF and LBR from the validity check in order to match
KVM's behavior for writes via WRMSR, but without clobbering vmcs12. Even
if VM_EXIT_SAVE_DEBUG_CONTROLS is set in vmcs12, L1 can reasonably expect
that vmcs12->guest_ia32_debugctl will not be modified if writes to the MSR
are being intercepted.
Arguably, KVM _should_ update vmcs12 if VM_EXIT_SAVE_DEBUG_CONTROLS is set
*and* writes to MSR_IA32_DEBUGCTLMSR are not being intercepted by L1, but
that would incur non-trivial complexity and wouldn't change the fact that
KVM's handling of DEBUGCTL is blatantly broken. I.e. the extra complexity
is not worth carrying.
Cc: stable@vger.kernel.org Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20250610232010.162191-7-seanjc@google.com
Stable-dep-of: 7d0cce6cbe71 ("KVM: VMX: Wrap all accesses to IA32_DEBUGCTL with getter/setter APIs") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move VMX's logic to check DEBUGCTL values into a standalone helper so that
the code can be used by nested VM-Enter to apply the same logic to the
value being loaded from vmcs12.
KVM needs to explicitly check vmcs12->guest_ia32_debugctl on nested
VM-Enter, as hardware may support features that KVM does not, i.e. relying
on hardware to detect invalid guest state will result in false negatives.
Unfortunately, that means applying KVM's funky suppression of BTF and LBR
to vmcs12 so as not to break existing guests.
No functional change intended.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Link: https://lore.kernel.org/r/20250610232010.162191-6-seanjc@google.com
Stable-dep-of: 7d0cce6cbe71 ("KVM: VMX: Wrap all accesses to IA32_DEBUGCTL with getter/setter APIs") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the
guest CPUID model, as debug support is supposed to be available if RTM is
supported, and there are no known downsides to letting the guest debug RTM
aborts.
Note, there are no known bug reports related to RTM_DEBUG, the primary
motivation is to reduce the probability of breaking existing guests when a
future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL
(KVM currently lets L2 run with whatever hardware supports; whoops).
Note #2, KVM already emulates DR6.RTM, and doesn't restrict access to
DR7.RTM.
Fixes: 83c529151ab0 ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250610232010.162191-5-seanjc@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instruct vendor code to load the guest's DR6 into hardware via a new
KVM_RUN flag, and remove kvm_x86_ops.set_dr6(), whose sole purpose was to
load vcpu->arch.dr6 into hardware when DR6 can be read/written directly
by the guest.
Note, TDX already WARNs on any run_flag being set, i.e. will yell if KVM
thinks DR6 needs to be reloaded. TDX vCPUs force KVM_DEBUGREG_AUTO_SWITCH
and never clear the flag, i.e. should never observe KVM_RUN_LOAD_GUEST_DR6.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250610232010.162191-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
[sean: drop TDX changes] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Convert kvm_x86_ops.vcpu_run()'s "force_immediate_exit" boolean parameter
into an a generic bitmap so that similar "take action" information can be
passed to vendor code without creating a pile of boolean parameters.
This will allow dropping kvm_x86_ops.set_dr6() in favor of a new flag, and
will also allow for adding similar functionality for re-loading debugctl
in the active VMCS.
Opportunistically massage the TDX WARN and comment to prepare for adding
more run_flags, all of which are expected to be mutually exclusive with
TDX, i.e. should be WARNed on.
No functional change intended.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250610232010.162191-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
[sean: drop TDX changes] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We already called ib_drain_qp() before and that makes sure
send_done() was called with IB_WC_WR_FLUSH_ERR, but
didn't called atomic_dec_and_test(&sc->send_io.pending.count)
So we may never reach the info->send_pending == 0 condition.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 5349ae5e05fa ("smb: client: let send_done() cleanup before calling smbd_disconnect_rdma_connection()") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should call ib_dma_unmap_single() and mempool_free() before calling
smbd_disconnect_rdma_connection().
And smbd_disconnect_rdma_connection() needs to be the last function to
call as all other state might already be gone after it returns.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: Long Li <longli@microsoft.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since these values can be large, the multiplication may exceed the
maximum value of an int (INT_MAX) and overflow (Our platform did),
leading to an incorrect adist.
User-visible impact:
The memory tiering subsystem will misinterpret slow memory (like CXL)
as faster than DRAM, causing inappropriate demotion of pages from
CXL (slow memory) to DRAM (fast memory).
For example, we will see the following demotion chains from the dmesg, where
Node0,1 are DRAM, and Node2,3 are CXL node:
Demotion targets for Node 0: null
Demotion targets for Node 1: null
Demotion targets for Node 2: preferred: 0-1, fallback: 0-1
Demotion targets for Node 3: preferred: 0-1, fallback: 0-1
Change MEMTIER_ADISTANCE_DRAM to be a long constant by writing it with
the 'L' suffix. This prevents the overflow because the multiplication
will then be done in the long type which has a larger range.
Link: https://lkml.kernel.org/r/20250611023439.2845785-1-lizhijian@fujitsu.com Link: https://lkml.kernel.org/r/20250610062751.2365436-1-lizhijian@fujitsu.com Fixes: 3718c02dbd4c ("acpi, hmat: calculate abstract distance with HMAT") Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com> Acked-by: Balbir Singh <balbirs@nvidia.com> Reviewed-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
REQ_OP_ZONE_FINISH is defined as "12", which makes
op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a
zone finish operation is an operation that modifies a zone (transition
it to full) and so should be considered as a write operation (albeit
one that does not transfer any data to the device).
Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and
redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential
odd numbers from that new value.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250625093327.548866-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application") Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier") Signed-off-by: Jiayi Li <lijiayi@kylinos.cn> Link: https://patch.msgid.link/20250721032606.3459369-1-lijiayi@kylinos.cn
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ] Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 2d8b39a62a5d ACPI: processor: Avoid NULL pointer dereferences at init time Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 3000ce3c52f8 cpufreq: Use per-policy frequency QoS Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: a1bb46c36ce3 ACPI: processor: Add QoS requests for all CPUs Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _CRS resources in many cases want to have ResourceSource field
to be a type of ACPI String. This means that to compile properly
we need to enclosure the name path into double quotes. This will
in practice defer the interpretation to a run-time stage, However,
this may be interpreted differently on different OSes and ACPI
interpreter implementations. In particular ACPICA might not correctly
recognize the leading '^' (caret) character and will not resolve
the relative name path properly. On top of that, this piece may be
used in SSDTs which are loaded after the DSDT and on itself may also
not resolve relative name paths outside of their own scopes.
With this all said, fix documentation to use fully-qualified name
paths always to avoid any misinterpretations, which is proven to
work.
Fixes: 8eb5c87a92c0 ("i2c: add ACPI support for I2C mux ports") Reported-by: Yevhen Kondrashyn <e.kondrashyn@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250710170225.961303-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that epoll instances can never form a graph deeper than
EP_MAX_NESTS+1 links.
Currently, ep_loop_check_proc() ensures that the graph is loop-free and
does some recursion depth checks, but those recursion depth checks don't
limit the depth of the resulting tree for two reasons:
- They don't look upwards in the tree.
- If there are multiple downwards paths of different lengths, only one of
the paths is actually considered for the depth check since commit 28d82dc1c4ed ("epoll: limit paths").
Essentially, the current recursion depth check in ep_loop_check_proc() just
serves to prevent it from recursing too deeply while checking for loops.
A more thorough check is done in reverse_path_check() after the new graph
edge has already been created; this checks, among other things, that no
paths going upwards from any non-epoll file with a length of more than 5
edges exist. However, this check does not apply to non-epoll files.
As a result, it is possible to recurse to a depth of at least roughly 500,
tested on v6.15. (I am unsure if deeper recursion is possible; and this may
have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion
problem").)
To fix it:
1. In ep_loop_check_proc(), note the subtree depth of each visited node,
and use subtree depths for the total depth calculation even when a subtree
has already been visited.
2. Add ep_get_upwards_depth_proc() for similarly determining the maximum
depth of an upwards walk.
3. In ep_loop_check(), use these values to limit the total path length
between epoll nodes to EP_MAX_NESTS edges.
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa424 ("get rid of NR_OPEN and introduce a sysctl_nr_open") Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make fscrypt no longer use Crypto API drivers for non-inline crypto
engines, even when the Crypto API prioritizes them over CPU-based code
(which unfortunately it often does). These drivers tend to be really
problematic, especially for fscrypt's workload. This commit has no
effect on inline crypto engines, which are different and do work well.
Specifically, exclude drivers that have CRYPTO_ALG_KERN_DRIVER_ONLY or
CRYPTO_ALG_ALLOCATES_MEMORY set. (Later, CRYPTO_ALG_ASYNC should be
excluded too. That's omitted for now to keep this commit backportable,
since until recently some CPU-based code had CRYPTO_ALG_ASYNC set.)
There are two major issues with these drivers: bugs and performance.
First, these drivers tend to be buggy. They're fundamentally much more
error-prone and harder to test than the CPU-based code. They often
don't get tested before kernel releases, and even if they do, the crypto
self-tests don't properly test these drivers. Released drivers have
en/decrypted or hashed data incorrectly. These bugs cause issues for
fscrypt users who often didn't even want to use these drivers, e.g.:
These drivers have also similarly caused issues for dm-crypt users,
including data corruption and deadlocks. Since Linux v5.10, dm-crypt
has disabled most of them by excluding CRYPTO_ALG_ALLOCATES_MEMORY.
Second, these drivers tend to be *much* slower than the CPU-based code.
This may seem counterintuitive, but benchmarks clearly show it. There's
a *lot* of overhead associated with going to a hardware driver, off the
CPU, and back again. To prove this, I gathered as many systems with
this type of crypto engine as I could, and I measured synchronous
encryption of 4096-byte messages (which matches fscrypt's workload):
So, there was no case in which the crypto engine was even *close* to
being faster. On the first three, which have AES instructions in the
CPU, the CPU was 30 to 55 times faster (!). Even on STM32MP157F-DK2
which has a Cortex-A7 CPU that doesn't have AES instructions, AES was
over 4 times faster on the CPU. And Adiantum encryption, which is what
actually should be used on CPUs like that, was over 17 times faster.
Other justifications that have been given for these non-inline crypto
engines (almost always coming from the hardware vendors, not actual
users) don't seem very plausible either:
- The crypto engine throughput could be improved by processing
multiple requests concurrently. Currently irrelevant to fscrypt,
since it doesn't do that. This would also be complex, and unhelpful
in many cases. 2 of the 4 engines I tested even had only one queue.
- Some of the engines, e.g. STM32, support hardware keys. Also
currently irrelevant to fscrypt, since it doesn't support these.
Interestingly, the STM32 driver itself doesn't support this either.
- Free up CPU for other tasks and/or reduce energy usage. Not very
plausible considering the "short" message length, driver overhead,
and scheduling overhead. There's just very little time for the CPU
to do something else like run another task or enter low-power state,
before the message finishes and it's time to process the next one.
- Some of these engines resist power analysis and electromagnetic
attacks, while the CPU-based crypto generally does not. In theory,
this sounds great. In practice, if this benefit requires the use of
an off-CPU offload that massively regresses performance and has a
low-quality, buggy driver, the price for this hardening (which is
not relevant to most fscrypt users, and tends to be incomplete) is
just too high. Inline crypto engines are much more promising here,
as are on-CPU solutions like RISC-V High Assurance Cryptography.
Using device_find_child() to locate a probed virtual-device-port node
causes a device refcount imbalance, as device_find_child() internally
calls get_device() to increment the device’s reference count before
returning its pointer. vdc_port_mpgroup_check() directly returns true
upon finding a matching device without releasing the reference via
put_device(). We should call put_device() to decrement refcount.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 3ee70591d6c4 ("sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://lore.kernel.org/r/20250719075856.3447953-1-make24@iscas.ac.cn Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In init_cpu_fullname(), a constant pointer to "model" property is
retrieved. It's later modified by the strsep() function, which is
illegal and corrupts kernel's FDT copy. This is shown by dmesg,
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
Create a mutable copy of the model property and do in-place operations
on the mutable copy instead. loongson_sysconf.cpuname lives across the
kernel lifetime, thus manually releasing isn't necessary.
Also move the of_node_put() call for the root node after the usage of
its property, since of_node_put() decreases the reference counter thus
usage after the call is unsafe.
Cc: stable@vger.kernel.org Fixes: 44a01f1f726a ("LoongArch: Parsing CPU-related information from DTS") Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Yao Zi <ziyao@disroot.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now relocate_new_kernel_size is a .long value, which means 32bit, so its
high 32bit is undefined. This causes memcpy((void *)reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size) in machine_kexec_prepare()
access out of range memories in some cases, and then end up with an ADE
exception.
So make relocate_new_kernel_size be a .quad value, which means 64bit, to
avoid such errors.
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by
"#define jmp_offset (out_offset - (cur_offset))"
is a negative number, which is wrong. The final generated assembly are
as follow.
Like s390 and the jailhouse hypervisor, LoongArch's PCI architecture allows
passing isolated PCI functions to a guest OS instance. So it is possible
that there is a multi-function device without function 0 for the host or
guest.
Allow probing such functions by adding a IS_ENABLED(CONFIG_LOONGARCH) case
in the hypervisor_isolated_pci_functions() helper.
This is similar to commit 189c6c33ff42 ("PCI: Extend isolated function
probing to s390").
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com> Fixes: c44c5eeb2c02 ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR") Cc: stable@vger.kernel.org Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com> Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/ Fixes: d20c11d86d8f ("nfsd: Protect session creation and client confirm using client_lock") Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Make sure to drop the references to the IEP OF node and device taken by
of_parse_phandle() and of_find_device_by_node() when looking up IEP
devices during probe.
Drop the bogus additional reference taken on successful lookup so that
the device is released correctly by icss_iep_put().
Fixes: c1e0230eeaab ("net: ti: icss-iep: Add IEP driver") Cc: stable@vger.kernel.org # 6.6 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-6-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference count to the WED devices has already been incremented when
looking them up using of_find_device_by_node() so drop the bogus
additional reference taken during probe.
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Cc: stable@vger.kernel.org # 5.19 Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-5-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the references to the IERB OF node and platform device
taken by of_parse_phandle() and of_find_device_by_node() during probe.
Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block") Cc: stable@vger.kernel.org # 5.13 Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250725171213.880-3-johan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814
phy") introduced cable_test support for the LAN8814 that reuses parts of
the KSZ886x logic and introduced the cable_diag_reg and pair_mask
parameters to account for differences between those chips.
However, it did not update the ksz8081_type struct, so those members are
now 0, causing no pairs to be tested in ksz886x_cable_test_get_status
and ksz886x_cable_test_wait_for_completion to poll the wrong register
for the affected PHYs (Basic Control/Reset, which is 0 in normal
operation) and exit immediately.
Fix this by setting both struct members accordingly.
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
While .led_blink_set() would previously put an LED into an unconditional
permanently blinking state, the offending commit now uses same operation
to (also?) set the blink timing of the netdev trigger when offloading.
This breaks many if not all of the existing PHY drivers which offer
offloading LED operations, as those drivers would just put the LED into
blinking state after .led_blink_set() has been called.
Unfortunately the change even made it into stable kernels for unknown
reasons, so it should be reverted there as well.
Driver in probe() updates each of 'reg_field' with 'reg_base':
for (i = 0; i < REG_MAX_COUNT; i++)
regs[i].reg += reg_base;
'reg_field' array (under variable 'regs' above) is statically allocated,
thus each re-bind would add another 'reg_base' leading to bogus
register addresses. Constify the local 'reg_field' array and duplicate
it in probe to solve this.
Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250529063335.8785-2-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Cc: stable@vger.kernel.org Fixes: 10af0273a35a ("gpio: mlxbf3: only get IRQ for device instance 0") Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gpio-mlxbf2 driver interfaces with four GPIO controllers,
device instances 0-3. There are two IRQ resources shared between
the four controllers, and they are found in the ACPI table for
instances 0 and 3. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instances 1 and 2:
mlxbf2_gpio MLNXBF22:01: error -ENXIO: IRQ index 0 not found
Quote from the virtio specification chapter 4.2.2.2:
"For the device-specific configuration space, the driver MUST use 8 bit
wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses
for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and
64 bit wide fields."
Commit 34331d7beed7 ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.
The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.
Additionally, commit 266b5d02e14f ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.
Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.
Fixes: 266b5d02e14f ("smb: client: fix race condition in negotiate timeout by using more precise timing") Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
In hidg_bind(), if alloc_workqueue() fails after usb_assign_descriptors()
has successfully allocated the USB descriptors, the current error handling
does not call usb_free_all_descriptors() to free the allocated descriptors,
resulting in a memory leak.
Restructure the error handling by adding proper cleanup labels:
- fail_free_all: cleans up workqueue and descriptors
- fail_free_descs: cleans up descriptors only
- fail: original cleanup for earlier failures
This ensures that allocated resources are properly freed in reverse order
of their allocation, preventing the memory leak when alloc_workqueue() fails.
A malicious HID device with quirk APPLE_MAGIC_BACKLIGHT can trigger a NULL
pointer dereference whilst the power feature-report is toggled and sent to
the device in apple_magic_backlight_report_set(). The power feature-report
is expected to have two data fields, but if the descriptor declares one
field then accessing field[1] and dereferencing it in
apple_magic_backlight_report_set() becomes invalid
since field[1] will be NULL.
An example of a minimal descriptor which can cause the crash is something
like the following where the report with ID 3 (power report) only
references a single 1-byte field. When hid core parses the descriptor it
will encounter the final feature tag, allocate a hid_report (all members
of field[] will be zeroed out), create field structure and populate it,
increasing the maxfield to 1. The subsequent field[1] access and
dereference causes the crash.
Usage Page (Vendor Defined 0xFF00)
Usage (0x0F)
Collection (Application)
Report ID (1)
Usage (0x01)
Logical Minimum (0)
Logical Maximum (255)
Report Size (8)
Report Count (1)
Feature (Data,Var,Abs)
To fix this issue we should validate the number of fields that the
backlight and power reports have and if they do not have the required
number of fields then bail.
Fixes: 394ba612f941 ("HID: apple: Add support for magic keyboard backlight on T2 Macs") Cc: stable@vger.kernel.org Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Orlando Chamberlain <orlandoch.dev@gmail.com> Tested-by: Aditya Garg <gargaditya08@live.com> Link: https://patch.msgid.link/20250713233008.15131-1-qasdev00@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If ti_csi2rx_start_dma() fails in ti_csi2rx_dma_callback(), the buffer is
marked done with VB2_BUF_STATE_ERROR but is not removed from the DMA queue.
This causes the same buffer to be retried in the next iteration, resulting
in a double list_del() and eventual list corruption.
Fix this by removing the buffer from the queue before calling
vb2_buffer_done() on error.
In setup_swap_map(), we only ensure badpages are in range (0, last_page].
As maxpages might be < last_page, setup_clusters() will encounter a buffer
overflow when a badpage is >= maxpages.
Only call inc_cluster_info_page() for badpage which is < maxpages to fix
the issue.
Link: https://lkml.kernel.org/r/20250522122554.12209-4-shikemeng@huaweicloud.com Fixes: b843786b0bd0 ("mm: swapfile: fix SSD detection with swapfile on btrfs") Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Baoquan He <bhe@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use maxpages from read_swap_header() to initialize swap_info_struct,
however the maxpages might be reduced in setup_swap_extents() and the
si->max is assigned with the reduced maxpages from the
setup_swap_extents().
Obviously, this could lead to memory waste as we allocated memory based on
larger maxpages, besides, this could lead to a potential deadloop as
following:
1) When calling setup_clusters() with larger maxpages, unavailable
pages within range [si->max, larger maxpages) are not accounted with
inc_cluster_info_page(). As a result, these pages are assumed
available but can not be allocated. The cluster contains these pages
can be moved to frag_clusters list after it's all available pages were
allocated.
2) When the cluster mentioned in 1) is the only cluster in
frag_clusters list, cluster_alloc_swap_entry() assume order 0
allocation will never failed and will enter a deadloop by keep trying
to allocate page from the only cluster in frag_clusters which contains
no actually available page.
Call setup_swap_extents() to get the final maxpages before
swap_info_struct initialization to fix the issue.
After this change, span will include badblocks and will become large
value which I think is correct value:
In summary, there are two kinds of swapfile_activate operations.
1. Filesystem style: Treat all blocks logical continuity and find
usable physical extents in logical range. In this way, si->pages will
be actual usable physical blocks and span will be "1 + highest_block -
lowest_block".
2. Block device style: Treat all blocks physically continue and only
one single extent is added. In this way, si->pages will be si->max and
span will be "si->pages - 1". Actually, si->pages and si->max is only
used in block device style and span value is set with si->pages. As a
result, span value in block device style will become a larger value as
you mentioned.
I think larger value is correct based on:
1. Span value in filesystem style is "1 + highest_block -
lowest_block" which is the range cover all possible phisical blocks
including the badblocks.
2. For block device style, si->pages is the actual usable block number
and is already in pr_info. The original span value before this patch
is also refer to usable block number which is redundant in pr_info.
Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.
Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.
Cc: stable@kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8211dad627981 ("s390: add pte_free_defer() for pgtables sharing
page") added a warning to pte_free_defer(), on our request. It was meant
to warn if this would ever be reached for KVM guest mappings, because
the page table would be freed w/o a gmap_unlink(). THP mappings are not
allowed for KVM guests on s390, so this should never happen.
However, it is possible that the warning is triggered in a valid case as
false-positive.
s390_enable_sie() takes the mmap_lock, marks all VMAs as VM_NOHUGEPAGE and
splits possibly existing THP guest mappings. mm->context.has_pgste is set
to 1 before that, to prevent races with the mm_has_pgste() check in
MADV_HUGEPAGE.
khugepaged drops the mmap_lock for file mappings and might run in parallel,
before a vma is marked VM_NOHUGEPAGE, but after mm->context.has_pgste was
set to 1. If it finds file mappings to collapse, it will eventually call
pte_free_defer(). This will trigger the warning, but it is a valid case
because gmap is not yet set up, and the THP mappings will be split again.
Right now, if XRSTOR fails a console message like this is be printed:
Bad FPU state detected at restore_fpregs_from_fpstate+0x9a/0x170, reinitializing FPU registers.
However, the text location (...+0x9a in this case) is the instruction
*AFTER* the XRSTOR. The highlighted instruction in the "Code:" dump
also points one instruction late.
The reason is that the "fixup" moves RIP up to pass the bad XRSTOR and
keep on running after returning from the #GP handler. But it does this
fixup before warning.
The resulting warning output is nonsensical because it looks like the
non-FPU-related instruction is #GP'ing.
Do not fix up RIP until after printing the warning. Do this by using
the more generic and standard ex_handler_default().
Fixes: d5c8028b4788 ("x86/fpu: Reinitialize FPU registers if restoring FPU state fails") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Acked-by: Alison Schofield <alison.schofield@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250624210148.97126F9E%40davehans-spike.ostc.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.
This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e162b
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().
In __hdmi_lpe_audio_probe(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in one character less
being copied from 'card->shortname' to 'pcm->name'.
Use the destination buffer size instead to ensure the card name is
copied correctly.
Cc: stable@vger.kernel.org Fixes: 75b1a8f9d62e ("ALSA: Convert strlcpy to strscpy when return value is unused") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250805234156.60294-1-thorsten.blum@linux.dev Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.
CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that,
when set, indicates that the software mitigation for this vulnerability is
not needed.
Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest
is vulnerable.
Co-developed-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
The Gemalto Cinterion PLS83-W modem (cdc_ether) is emitting confusing link
up and down events when the WWAN interface is activated on the modem-side.
Interrupt URBs will in consecutive polls grab:
* Link Connected
* Link Disconnected
* Link Connected
Where the last Connected is then a stable link state.
When the system is under load this may cause the unlink_urbs() work in
__handle_link_change() to not complete before the next usbnet_link_change()
call turns the carrier on again, allowing rx_submit() to queue new SKBs.
In that event the URB queue is filled faster than it can drain, ending up
in a RCU stall:
rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-.... } 33108 jiffies s: 201 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
projects / thirdparty / kernel / stable.git / log
