Jonathan Rose [Wed, 11 Sep 2013 19:39:36 +0000 (19:39 +0000)]
chan_sip: Reject calls without prior SDP on 200 OK
If we receive a 200 OK without SDP, we will now check to see if
the remote address has been established for that channel's RTP
session and if the to tag for that channel has changed from
the most recent to tag in a response less than 200.
If either a change has been made since the last to-tag was
received or the remote address is unset, then we will drop
the call.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/diff/#index_header
Richard Mudgett [Mon, 9 Sep 2013 23:15:38 +0000 (23:15 +0000)]
MALLOC_DEBUG: Change fence magic number to be completely different from the freed magic number.
Race conditions between freeing a nul terminated string and
ast_strdup()'ing it are more likely to be detected if the fence and freed
magic numbers are completely different.
David M. Lee [Mon, 9 Sep 2013 19:56:02 +0000 (19:56 +0000)]
Fix DEBUG_THREADS when lock is acquired in __constructor__
This patch fixes some long-standing bugs in debug threads that were
exacerbated with recent Optional API work in Asterisk 12.
With debug threads enabled, on some systems, there's a lock ordering
problem between our mutex and glibc's mutex protecting its module list
(Ubuntu Lucid, glibc 2.11.1 in this instance). In one thread, the module
list will be locked before acquiring our mutex. In another thread, our
mutex will be locked before locking the module list (which happens in
the depths of calling backtrace()).
This patch fixes this issue by moving backtrace() calls outside of
critical sections that have the mutex acquired. The bigger change was to
reentrancy tracking for ast_cond_{timed,}wait, which wrongly assumed
that waiting on the mutex was equivalent to a single unlock (it actually
suspends all recursive locks on the mutex).
Kinsey Moore [Fri, 6 Sep 2013 19:16:14 +0000 (19:16 +0000)]
Fix Jabber/XMPP distributed MWI
The mailbox and context are swapped on the receiving end for all users
of Jabber and XMPP distributed MWI in Asterisk 1.8 and all more recent
versions. This swaps those values to be correct when publishing to the
internal event system from Jabber/XMPP distributed MWI state.
(closes issue ASTERISK-22435)
Reported by: abelbeck
Tested by: Michael Keuter
Patches:
asterisk-1.8-res_jabber-aji_handle_pubsub_event.patch uploaded by abelbeck
asterisk-11-res_xmpp-xmpp_pubsub_handle_event.patch uploaded by abelbeck
Richard Mudgett [Thu, 5 Sep 2013 17:28:14 +0000 (17:28 +0000)]
chan_iax2: Fix stray reference to worker thread idle_list.
* Fix stray reference to idle_list in cleanup_thread_list(). This may be
the reason for the note in iax2_process_thread() about threads not being
removed from the task lists.
* Move cleanup_thread_list(&idle_list) to after the other lists are
cleaned up.
Richard Mudgett [Thu, 5 Sep 2013 17:07:44 +0000 (17:07 +0000)]
chan_iax2: Fix bridgecallno deadlock avoidance.
* Fix bridgecallno deadlock avoidance. When doing deadlock avoidance, you
need to retest the status of values for each loop to see if you still need
the lock for bridgecallno.
* As a safety check, after acquiring the bridgecallno lock you should
check if iaxs[bridgecallno] is NULL just like the current callno checks.
* Move setting thread->iostate to IAX_IOSTATE_IDLE to after processing any
deferred frames to ensure that the iostate is IDLE when it is placed back
into the idle list. defer_full_frame() tries to ensure
iax2_process_thread() wakes up to process the frame.
Richard Mudgett [Wed, 4 Sep 2013 15:54:37 +0000 (15:54 +0000)]
chan_misdn: Fix misdn debug output printed with arbitrary verbose levels.
Fix the misdn debug output to remote consoles. chan_misdn uses
ast_console_puts() which doesn't know about verbose levels. Better to use
ast_verbose() instead. Without this patch the misdn debug messages are
appended to the verbose level which ever was set by the message sent to
the console before, i.e. any undefined level.
Kevin Harwell [Fri, 30 Aug 2013 16:58:34 +0000 (16:58 +0000)]
Fix memory leak
Fixed a features.c test that leaked a reference to a parked call. This caused
chancount to never reach 0, so graceful shutdown stops. Also added an
unregister test.
Richard Mudgett [Fri, 30 Aug 2013 16:46:52 +0000 (16:46 +0000)]
test_substituition: Fix failed test reporting to actually report failure.
You cannot put the "Testing <blah> pass/fail" on a single line before
actually performing the test. Now any additional failure information is
logged before the test pass/fail announcement.
Matthew Jordan [Tue, 27 Aug 2013 17:55:59 +0000 (17:55 +0000)]
AST-2013-005: Fix crash caused by invalid SDP
If the SIP channel driver processes an invalid SDP that defines media
descriptions before connection information, it may attempt to reference
the socket address information even though that information has not yet
been set. This will cause a crash.
This patch adds checks when handling the various media descriptions that
ensures the media descriptions are handled only if we have connection
information suitable for that media.
Thanks to Walter Doekes, OSSO B.V., for reporting, testing, and providing
the solution to this problem.
Matthew Jordan [Tue, 27 Aug 2013 15:49:14 +0000 (15:49 +0000)]
AST-2013-004: Fix crash when handling ACK on dialog that has no channel
A remote exploitable crash vulnerability exists in the SIP channel driver if an
ACK with SDP is received after the channel has been terminated. The handling
code incorrectly assumed that the channel would always be present.
This patch adds a check such that the SDP will only be parsed and applied if
Asterisk has a channel present that is associated with the dialog.
Note that the patch being applied was modified only slightly from the patch
provided by Walter Doekes of OSSO B.V.
(closes issue ASTERISK-21064)
Reported by: Colin Cuthbertson
Tested by: wdoekes, Colin Cutherbertson
patches:
issueA21064_fix.patch uploaded by wdoekes (License 5674)
Richard Mudgett [Fri, 23 Aug 2013 15:34:27 +0000 (15:34 +0000)]
Fix memory corruption when trying to get "core show locks".
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Walter Doekes [Thu, 22 Aug 2013 08:19:02 +0000 (08:19 +0000)]
Add _IO_stdin_used in version-script to fix SIGBUSes on Sparc.
The --version-script,asterisk.exports linker flag (and the module
exports) didn't provide _IO_stdin_used in the list of exported symbols.
That causes some kind of libc compatibility mode to kick in, where
stdio file structures (stdout/stderr) land somewhere else. In the
case of the Sparc, they landed on misaligned memory.
This became apparent first after r376428 (Reorder startup sequence)
when a lot of ast_log's were replaced with fprintf's. Writing to
stderr triggered a SIGBUS. (Compared to x86 and amd64 architectures,
the Sparc is very picky about memory alignment.)
(issue ASTERISK-21763)
(issue ASTERISK-21665)
Reported by: Jeremy Kister
Review: https://reviewboard.asterisk.org/r/2760/
Matthew Jordan [Wed, 21 Aug 2013 14:56:09 +0000 (14:56 +0000)]
Set 14400 as the default max bit rate if T38MaxBitRate is not specified
If an endpoint fails to include the T38MaxBitRate attribute during negotiation,
Asterisk will negotiate a bit rate of 2400 instead of the ITU recommended
bit rate of 14400. This patch fixes this by making AST_T38_RATE_14400 the
'default' value of the enum by assigning it a value of 0, such that if an
endpoint fails to include the attribute, the default will be 14400.
Note that Walter Doekes included the nice comment in frame.h about why we are
purposefully assigning AST_T38_RATE_14400 a value of 0.
(closes issue ASTERISK-22275)
Reported by: Andreas Steinmetz
patches:
fax-fix.patch uploaded by anstein (License 6523)
Michael L. Young [Wed, 21 Aug 2013 02:09:21 +0000 (02:09 +0000)]
Fix Not Storing Current Incoming Recv Address
In 1.8, r384779 introduced a regression by retrieving an old dialog and keeping
the old recv address since recv was already set. This has caused a problem when
a proxy is involved since responses to incoming requests from the proxy server,
after an outbound call is established, are never sent to the correct recv
address.
In 11, r382322 introduced this regression.
The fix is to revert that change and always store the recv address on incoming
requests.
Thank you Walter Doekes for helping to point out this error and Mark Michelson
for your input/review of the fix.
(closes issue ASTERISK-22071)
Reported by: Alex Zarubin
Tested by: Alex Zarubin, Karsten Wemheuer
Patches:
asterisk-22071-store-recvd-address.diff by Michael L. Young (license 5026)
Matthew Jordan [Tue, 20 Aug 2013 01:17:31 +0000 (01:17 +0000)]
Fix invalid access to disposed memory in main/data unit test
It is not safe to iterate over a macro'd list of ao2 objects, deref them such
that the item's destructor is called, and leave them in the list. The list
macro to iterate over items requires the item to be a valid allocated object
in order to proceed to the next item; with MALLOC_DEBUG on the corruption of
the linked list is caught in the crash.
This patch fixes the invalid access to free'd memory by removing the ao2 item
from the list before de-refing it.
Note that this is a backport of r396915 from Asterisk trunk.
Kinsey Moore [Thu, 15 Aug 2013 16:21:20 +0000 (16:21 +0000)]
Remove leading spaces from the CLI command before parsing
If you've mistakenly put a space before typing in a command, the
leading space will be included as part of the command, and the command
parser will not find the corresponding command. This patch rectifies
that situation by stripping the leading spaces on commands.
Joshua Colp [Wed, 14 Aug 2013 18:07:37 +0000 (18:07 +0000)]
Tweak test_hashtab_thrash test to allow the critical threads to execute.
Depending on certain conditions it was possible for the hashtab counting thread
to starve other threads, preventing them from executing in the expected fashion.
This change adds a sleep to allow the others to do what they need to do. While
this doesn't thrash the hashtab as much as previously, it at least works.
(closes issue ASTERISK-22276)
Reported by: Matt Jordan
Fix Registration Failure When A Peer And TLS Are Used
If a peer is used in a register line and TLS is defined as the transport, the
registration fails since the transport on the dialog is never set properly
resulting in UDP being used instead of TLS.
This patch sets the dialog's transport based on the transport that was defined
in the register line. If the register line does not specify a transport, the
parsing function for the register line always defaults back to UDP.
(closes issue ASTERISK-21964)
Reported by: Doug Bailey
Tested by: Doug Bailey
Patches:
asterisk-21964-set-reg-dialog-transport.diff
by Michael L. Young (license 5026)
Restore Extra Line Break Between Peers When Running AMI Action SIPPeers
The commit (r387133) for fixing ASTERISK-21466 accidentally removed an extra
line break between the peers returned by the AMI action SIPPeers. This
results in some parsers breaking because they expect this extra line break.
This patch restores that extra line break.
(closes issue ASTERISK-22239)
Reported by: Jacek Konieczny
Tested by: Jacek Konieczny, Michael L. Young
Patches:
asterisk-ami_sippeers_separator.patch by Jacek Konieczny (license 6298)
Adding a note to UPGRADE.txt about a change made to res_agi in order to
indicate when streaming an audio file fails like it is done in other parts
of the code to indicate an error.
Note was requested by Paul Belanger:
http://lists.digium.com/pipermail/asterisk-dev/2013-July/061420.html
Matthew Jordan [Sun, 21 Jul 2013 18:15:57 +0000 (18:15 +0000)]
Provide proper ring tone in indications.conf for Malaysia
The ring tone provided in the sample indications.conf was incorrect. This patch
modifies the sample ring tone to be what it should:
ring = 425/400,0/200,425/400,0/2000
This brings it in line with the tone definition in DAHDI 2.7.0. (zonedata.c)
(closes issue ASTERISK-21997)
Reported by: Filip Jenicek
patches:
malaysia_ring.patch uploaded by phill (License 6277)
Matthew Jordan [Sun, 21 Jul 2013 03:09:16 +0000 (03:09 +0000)]
Tolerate presence of RFC2965 Cookie2 header by ignoring it
This patch modifies parsing of cookies in Asterisk's http server by doing an
explicit comparison of the "Cookie" header instead of looking at the first
6 characters to determine if the header is a cookie header. This avoids
parsing "Cookie2" headers and overwriting the previously parsed "Cookie"
header.
Note that we probably should be appending the cookies in each "Cookie"
header to the parsed results; however, while clients can send multiple
cookie headers they never really do. While this patch doesn't improve
Asterisk's behavior in that regard, it shouldn't make it any worse either.
Note that the solution in this patch was pointed out on the issue by the
issue reporter, Stuart Henderson.
(closes issue ASTERISK-21789)
Reported by: Stuart Henderson
Tested by: mjordan, Stuart Henderson
Matthew Jordan [Sun, 21 Jul 2013 02:38:09 +0000 (02:38 +0000)]
Update PostgreSQL realtime scripts with schema for queue_log table
This patch updates the realtime SQL scripts with an entry that will create the
queue_log table. This brings the PostgreSQL scripts inline with the MySQL
scripts, with respect to what tables they will create.
Michael L. Young [Thu, 18 Jul 2013 12:51:22 +0000 (12:51 +0000)]
Properly indicate failure to open an audio stream in res_agi
If there is an error streaming an audio file, the current return status makes it
difficult for an AGI script to determine that there was an error with the audio
file.
This patches changes the result to return -1 and the function returns
RESULT_FAILURE instead of RESULT_SUCCESS. From looking at other parts of
res_agi, this would appear to be the proper way to handle an error.
(closes issue ASTERISK-21903)
Reported by: Ariel Wainer
Tested by: Ariel Wainer
Patches:
asterisk-21903-return-stream-res_1.8.diff
by Michael L. Young (license 5026)
Matthew Jordan [Sun, 14 Jul 2013 01:53:15 +0000 (01:53 +0000)]
Clarify documentation for function PASSTHRU
It is not apparent to the average user that the PASSTHRU function should not
be passed as ${PASSTHRU(string)} but just as PASSTHRU(string) to functions
which take a variable name and not its contents.
This patch clarifies the behavior in the documentation and provides an example.
(closes issue ASTERISK-21717)
Reported by: Richard Miller
patches:
func_strings.diff uploaded by Richard Miller (license 5685)
Fix a longstanding issue with MFC-R2 configuration that prevented users
from mixing different variants or general MFC-R2 settings within the same E1 line.
Most users do not have a problem with this since MFC-R2 lines are usually fractional E1s, or
the whole E1 has the same country variant and R2 settings.
In Venezuela however is common to have inbound MFC-R2 and outbound DTMF-R2 within the same E1.
This fix now properly parses the chan_dahdi.conf file to generate a new openr2 context every
time a new channel => section is found and the configuration was changed.
(closes issue ASTERISK-21117)
Reported by: Rafael Angulo
Related Elastix issue: http://bugs.elastix.org/view.php?id=1612
Russell Bryant [Wed, 10 Jul 2013 01:41:42 +0000 (01:41 +0000)]
astobj2-ify the SLA code
The SLA code within app_meetme was written before asotbj2 had been
merged into Asterisk. Worse, support for reloads did not exist at first
and was added later as a bolt-on feature. I knew at the time that
reloading was not safe at all while SLA was in use, so the reload would
be queued up to execute when the system was idle. Unfortunately, this
approach was still prone to errors beyond the fact that this was the
only place in Asterisk where configuration was not reloaded
instantly when requested.
This patch converts various SLA objects to be reference counted objects
using astobj2. This allows reloads to be processed while the system is
in use. The code ensures that the objects will not disappear while one
of the other threads is using them. However, they will be immediately
removed from the global trunk and station containers so no new calls
will use them if removed from configuration.
Jonathan Rose [Fri, 14 Jun 2013 16:14:48 +0000 (16:14 +0000)]
app_mixmonitor: Fix crashes caused by unloading app_mixmonitor
Unloading app_mixmonitor while active mixmonitors were running would
cause a segfault. This patch fixes that by making it impossible to
unload app_mixmonitor while mixmonitors are active.
Matthew Jordan [Wed, 12 Jun 2013 02:19:52 +0000 (02:19 +0000)]
Fix memory leak while loading priority modules
When we load a module with the LOAD_PRIORITY flag, we remove its entry from
the load order list. Unfortunately, we don't free the memory associated with
entry in the list. This patch corrects that and properly frees the memory for
the module in the list.
Matthew Jordan [Mon, 10 Jun 2013 14:15:19 +0000 (14:15 +0000)]
Add announce-to-first-user option for app_queue
In r386792, the ability to play prompts to the first caller in a call queue was
added. While this is arguably a bug fix for those who expect the first caller
to continue receiving prompts while the agent is dialed, it has the side effect
of preventing the first caller from hearing the agent immediately upon
bridging. This may not be a problem for those who really want this option, but
for those who didn't care whether or not the first caller in queue heard their
position, it was an issue.
This patch disables the ability for the first caller in the queue to hear
prompts and adds a new option, announce-to-first-user, to queues.conf. Those
who the behavior can enable it by setting this value to True.
Note that if we ever implement the ability to have the prompts be stopped
upon bridging, this option can be removed.
Alec L Davis [Mon, 10 Jun 2013 07:30:35 +0000 (07:30 +0000)]
IAX2: fix race condition with nativebridge transfers.
1). When touching the bridgecallno, we need to lock it.
2). stop_stuff() which calls iax2_destroy_helper()
Assumes the lock on the pvt is already held, when iax2_destroy_helper() is called.
Thus we need to lock the bridgecallno pvt before we call stop_stuff(iaxs[fr->callno]->bridgecallno);
3). When evaluating the state of 'callno->transferring' of the current leg,
we can't change it to READY unless the bridgecallno is locked.
Why, if we are interrupted by the other call leg before 'transferring = TRANSFER_RELEASED',
the interrupt will find that it is READY and that the bridgecallno is also READY so Releases the legs.
Richard Mudgett [Wed, 29 May 2013 20:10:04 +0000 (20:10 +0000)]
Fix segfault when dealing with chan_agent channels.
Check the returned bridged pointer for NULL to avoid a crash. It looks
like chan_agent is returning a NULL pointer when it probably should be
returning a pointer to the channel the Agent channel is pretending to be.
(closes issue ASTERISK-21793)
Reported by: Rodrigo P. Telles
Patches:
jira_asterisk_21793_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Rodrigo P. Telles
Jonathan Rose [Tue, 28 May 2013 17:35:12 +0000 (17:35 +0000)]
Fix a memory copying bug in slinfactory which was causing mixmonitor issues.
Reported by: Michael Walton
Tested by: Jonathan Rose
Patches:
slinfactory.c.ASTERISK-21799.patch uploaded by Michael Walton (license 6502)
(closes issue ASTERISK-21799)
Matthew Jordan [Fri, 24 May 2013 11:42:38 +0000 (11:42 +0000)]
Print all logger messages on shutdown
When Asterisk shuts down and shuts down the loggin gsubsystem, any
messages currently in flight will not get logged. This patch prevents the
loop writing messages from breaking out prematurely, such that all of the
messages are logged.
Kevin Harwell [Wed, 15 May 2013 15:54:50 +0000 (15:54 +0000)]
Fix for segfault in __ast_rwlock_destroy with DEBUG_THREADS
If DEBUG_THREADS is enabled __ast_rwlock_destroy causes a segfault while trying
to access a possible NULL t->track object. A NULL check has been added before
trying to access the memory.
Richard Mudgett [Fri, 10 May 2013 22:09:32 +0000 (22:09 +0000)]
Allow mISDN to send PROGRESS messsage.
* Made isdn_msg_parser.c build a progress message with the mandatory
progress indicator IE. (The mISDNuser NT state machine rejected sending
the incomplete message.)
Note: The associated mISDN and mISDNuser patches respectively are viewable
here:
http://svnview.digium.com/svn/thirdparty?view=rev&rev=200
http://svnview.digium.com/svn/thirdparty?view=rev&rev=201
Fix The Payload Being Set On CN Packets And Do Not Set Marker Bit
When we send out a CN packet (for instance, in the case of using rtpkeepalives),
we are not setting the payload code properly. Also, we are setting the marker
bit when we shouldn't be according to RFC 3389, section 4.
AST_RTP_CN is not defined by AST_FORMAT codes. Therefore, we should be using
ast_rtp_codecs_payload_code() rather than ast_rtp_codecs_payload_lookup().
11 and trunk already use the appropriate function.
* In 1.8, use ast_rtp_codecs_payload_code()
* Remove the setting of the marker bit
* Fix the debug message by incrementing the seqno after the debug message is set
in order to display the correct seqno that was sent out
(closes issue ASTERISK-21246)
Reported by: Peter Katzmann
Tested by: Peter Katzmann, Michael L. Young
Patches:
asterisk-21246-rtp-cng-payload-error_1.8_v2.diff
uploaded by Michael L. Young (license 5026)
Alec L Davis [Wed, 8 May 2013 07:17:17 +0000 (07:17 +0000)]
chan_sip: NOTIFYs for BLF start queuing up and fail to be sent out after retries fail
RFC6665 4.2.2: ... after a failed State NOTIFY transaction remove the subscription
The problem is that the State Notify requests rely on the 200OK reponse for pacing control
and to not confuse the notify susbsystem.
The issue is, the pendinginvite isn't cleared if a response isn't received,
thus further notify's are never sent.
The solution, follow RFC 6665 4.2.2's 'SHOULD' and remove the subscription after failure.
(closes issue ASTERISK-21677)
Reported by: Dan Martens
Tested by: Dan Martens, David Brillert, alecdavis
alecdavis (license 585)
Russell Bryant [Mon, 6 May 2013 15:52:16 +0000 (15:52 +0000)]
Make SLA reload more paranoid.
Reload support was originally not included for SLA. It was added later,
but in a fairly non-traditional way. It basically sets a flag
indicating that a reload is pending, and then waits for a time where it
thinks everything SLA related is idle and unused, and *then* executes
the reload. It does this because the reload process is destructive. It
starts by throwing everything away and starting over.
There are a number of problems with this approach. One of them is that
the check to see if anything in use was incomplete. This patch makes it
more complete and thus less likely for a crash to occur during reload
processing. However, this approach still has problems so some much more
significant reworking of this code will need to come in as a next step.
Matthew Jordan [Thu, 2 May 2013 17:11:20 +0000 (17:11 +0000)]
Update utils Makefile to handle r387294
Alec's patch that added the Asterisk version to 'core show locks' angered the
items in utils, as they exist somewhat outside of the Asterisk build system.
Some day, this Makefile should get nuked from high orbit, but for now, include
version.c in its list of stuff to pile in.
Alec L Davis [Thu, 2 May 2013 07:53:55 +0000 (07:53 +0000)]
chan_sip: Session-Expires: Set timer to correctly expire at (~2/3) of the interval when not the refresher
RFC 4028 Section 10
if the side not performing refreshes does not receive a
session refresh request before the session expiration, it SHOULD send
a BYE to terminate the session, slightly before the session
expiration. The minimum of 32 seconds and one third of the session
interval is RECOMMENDED.
Prior to this asterisk would refresh at 1/2 the Session-Expires interval,
or if the remote device was the refresher, asterisk would timeout at interval end.
Now, when not refresher, timeout as per RFC noted above.
Alec L Davis [Thu, 2 May 2013 07:20:54 +0000 (07:20 +0000)]
chan_sip: Honor Session-Expires in 200OK response when it's a RE-INVITE when asterisk is the refresher.
RFC 4028 Section 7.2
"UACs MUST be prepared to receive a Session-Expires header field in a
response, even if none were present in the request."
What changed
After ASTERISK-20787, inbound calls to asterisk with no Session-Expires in the INVITE are now are offered
a Session-Expires (1800 asterisk default) in the response, with asterisk as the refresher.
Symptom:
After 900 seconds (asterisk default refresher period 1800), asterisk RE-INVITEs the device, the device
may respond with a much lower Session-Expires (180 in our case) value that it is now using.
Asterisk ignores this response, as it's deemed both an INBOUND CALL, and a RE-INVITE.
After 180 seconds the device times out and sends BYE (hangs up), asterisk is still working with the
refresher period of 1800 as it ignored the 'Session Expires: 180' in the previous 200OK response.
Fix:
handle_response_invite() when 200OK, remove check for outbound and reinvite.
Matthew Jordan [Wed, 1 May 2013 21:15:46 +0000 (21:15 +0000)]
Clear the DTMF sending digit tracking on off nominal paths
In certain situations, when the RTP engine goes to send a DTMF end digit
it may be in a situation where the remote address is no longer available,
or the digit that was supposed to be sent is invalid. In such cases, we
need to clear the RTP counters appropriately. Otherwise, when the RTP
source is set again, we'll continue to think that we're in the middle of
sending a DTMF digit, which can confuse the remote party (signficantly).
Matthew Jordan [Wed, 1 May 2013 18:34:44 +0000 (18:34 +0000)]
Prevent crash in 'sip show peers' when the number of peers on a system is large
When you have lots of SIP peers (according to the issue reporter, around 3500),
the 'sip show peers' CLI command or AMI action can crash due to a poorly placed
string duplication that occurs on the stack. This patch refactors the command
to not allocate the string on the stack, and handles the formatting of a single
peer in a separate function call.
Matthew Jordan [Tue, 30 Apr 2013 22:34:05 +0000 (22:34 +0000)]
Fix CDR not being created during an externally initiated blind transfer
Way back when in the dark days of Asterisk 1.8.9, blind transferring a call
in a context that included the 'h' extension would inadvertently execute the
hangup code logic on the transferred channel. This was a "bad thing". The fix
was to properly check for the softhangup flags on the channel and only execute
the 'h' extension logic (and, in later versions, hangup handler logic) if the
channel was well and truly dead (Jim).
Unfortunately, CDRs are fickle. Setting the softhangup flag when we detected
that the channel was leaving the bridge (but not to die) caused some crucial
snippet of CDR code, lying in ambush in the middle of the bridging code, to
not get executed. This had the effect of blowing away one of the CDRs that is
typically created during a blind transfer.
While we live and die by the adage "don't touch CDRs in release branches", this
was our bad. The attached patch restores the CDR behavior, and still manages to
not run the 'h' extension during a blind transfer (at least not when it's
supposed to).
Thanks to Steve Davies for diagnosing this and providing a fix.
Review: https://reviewboard.asterisk.org/r/2476
(closes issue ASTERISK-21394)
Reported by: Ishfaq Malik
Tested by: Ishfaq Malik, mjordan
patches:
fix_missing_blindXfer_cdr2 uploaded by one47 (License 5012)
Matthew Jordan [Fri, 26 Apr 2013 21:26:39 +0000 (21:26 +0000)]
Clean up memory leak in config file on off nominal paths when glob is allowed
If a system allows for its usage, Asterisk will use glob to help parse
Asterisk .conf files. The config file loading routine was leaking the memory
allocated by the glob() routine when the config file was in an unmodified
or invalid state.
This patch properly calls globfree in those off nominal paths.
Matthew Jordan [Fri, 26 Apr 2013 21:11:33 +0000 (21:11 +0000)]
Clean up resources in features on exit
This patch cleans up two things features:
* It properly unregisters the CLI commands that features registered
* It cancels and performs a pthread_join on the created parking thread. This
not only properly joins a non-detached thread, but also prevents disposing
of the parking lots prior to the parking thread completely exiting.
Richard Mudgett [Mon, 22 Apr 2013 16:10:29 +0000 (16:10 +0000)]
Fix crash when AMI redirect action redirects two channels out of a bridge.
The two party bridging loops were changing the bridge peer pointers
without the channel locks held. Thus when ast_channel_massquerade()
tested and used the pointer there is a small window of opportunity for the
pointers to become NULL even though the masquerade code has the channels
locked.
(closes issue ASTERISK-21356)
Reported by: William luke
Patches:
jira_asterisk_21356_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: William luke
Matthew Jordan [Fri, 19 Apr 2013 15:59:25 +0000 (15:59 +0000)]
Prevent res_timing_pthread from blocking callers
There were several reports of deadlock when using
res_timing_pthread. Backtraces indicated that one thread was blocked
waiting for the write to the pipe to complete and this thread held
the container lock for the timers. Therefore any thread that wanted
to create a new timer or read an existing timer would block waiting
for either the timer lock or the container lock and deadlock ensued.
This patch changes the way the pipe is used to eliminate this source
of deadlocks:
1) The pipe is placed in non-blocking mode so that it would never
block even if the following changes someone fail...
2) Instead of writing bytes into the pipe for each "tick" that's
fired the pipe now has two states--signaled and unsignaled. If
signaled, the pipe is hot and any pollers of the read side
filedescriptor will be woken up. If unsigned the pipe is idle. This
eliminates even the chance of filling up the pipe and reduces the
potential overhead of calling unnecessary writes.
3) Since we're tracking the signaled / unsignaled state, we can
eliminate the exta poll system call for every firing because we know
that there is data to be read.
(closes issue ASTERISK-21389)
Reported by: Matt Jordan
Tested by: Shaun Ruffell, Matt Jordan, Tony Lewis
patches:
0001-res_timing_pthread-Reduce-probability-of-deadlocking.patch uploaded by sruffell (License 5417)
(closes issue ASTERISK-19754)
Reported by: Nikola Ciprich
(closes issue ASTERISK-20577)
Reported by: Kien Kennedy
(closes issue ASTERISK-17436)
Reported by: Henry Fernandes
Alec L Davis [Tue, 16 Apr 2013 23:11:46 +0000 (23:11 +0000)]
Distributed Device State broken at sites using res_xmpp or res_jabber where Secuity Advisory AST-2012-015 is inplace
res_jabber/res_xmpp were not adding AST_EVENT_IE_CACHABLE to the event as each message came in,
then devstate_change_collector_cb() was unable to find AST_EVENT_IE_CACHABLE in the event,
so defaulted incorrectly to AST_DEVSTATE_NOT_CACHABLE.
David M. Lee [Mon, 15 Apr 2013 14:38:24 +0000 (14:38 +0000)]
Fix the svn:keywords property on several files.
Normally I think keyword expansion is silly, but the one time it would have
been good, it didn't work because the property had quotes in it. This patch
fixes obviously busted svn:keywords properties.
projects / thirdparty / asterisk.git / log
