This patch addresses a regression in the ASoC STI drivers that was
introduced in Linux version 6.6.y. The issue originated from a series of
patches (see https://lore.kernel.org/all/87wmy5b0wt.wl-kuninori.morimoto.gx@renesas.com/)
that unintentionally omitted necessary probe functions for the player
and reader components.
Probe function in `sound/soc/sti/sti_uniperif.c:415` is being replaced
by another probe function located at `sound/soc/sti/sti_uniperif.c:453`,
which should instead be derived from the player and reader components.
This patch correctly reinserts the missing probe entries,
restoring the intended functionality.
Device has up to WSA884X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA884X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA884X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Add support to parse static master port map information from device tree.
This is required for correct port mapping between soundwire device and
master ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patch.msgid.link/20240626-port-map-v2-4-6cc1c5608cdd@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: dcb6631d0515 ("ASoC: codecs: wsa884x: Correct Soundwire ports mask") Signed-off-by: Sasha Levin <sashal@kernel.org>
Device has up to WSA883X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA883X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA883X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Device has up to WSA881X_MAX_SWR_PORTS number of ports and the array
assigned to prop.sink_dpn_prop has 0..WSA881X_MAX_SWR_PORTS-1 elements.
On the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WSA881X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Device has up to WCD939X_MAX_TX_SWR_PORTS (or WCD939X_MAX_RX_SWR_PORTS
for sink) number of ports and the array assigned to prop.src_dpn_prop
and prop.sink_dpn_prop has 0..WCD939X_MAX_TX_SWR_PORTS-1 elements. On
the other hand, GENMASK(high, low) creates an inclusive mask between
<high, low>, so we need the mask from 0 up to WCD939X_MAX_TX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
Device has up to WCD938X_MAX_SWR_PORTS number of ports and the array
assigned to prop.src_dpn_prop and prop.sink_dpn_prop has
0..WCD938X_MAX_SWR_PORTS-1 elements. On the other hand, GENMASK(high,
low) creates an inclusive mask between <high, low>, so we need the mask
from 0 up to WCD938X_MAX_SWR_PORTS-1.
Theoretically, too wide mask could cause an out of bounds read in
sdw_get_slave_dpn_prop() in stream.c, however only in the case of buggy
driver, e.g. adding incorrect number of ports via
sdw_stream_add_slave().
The following messages were observed while testing alert functionality
on systems with multiple I2C devices on a single bus if alert was active
on more than one chip.
smbus_alert 3-000c: SMBALERT# from dev 0x0c, flag 0
smbus_alert 3-000c: no driver alert()!
and:
smbus_alert 3-000c: SMBALERT# from dev 0x28, flag 0
Once it starts, this message repeats forever at high rate. There is no
device at any of the reported addresses.
Analysis shows that this is seen if multiple devices have the alert pin
active. Apparently some devices do not support SMBus arbitration correctly.
They keep sending address bits after detecting an address collision and
handle the collision not at all or too late.
Specifically, address 0x0c is seen with ADT7461A at address 0x4c and
ADM1021 at address 0x18 if alert is active on both chips. Address 0x28 is
seen with ADT7483 at address 0x2a and ADT7461 at address 0x4c if alert is
active on both chips.
Once the system is in bad state (alert is set by more than one chip),
it often only recovers by power cycling.
To reduce the impact of this problem, abort the endless loop in
smbus_alert() if the same address is read more than once and not
handled by a driver.
Fixes: b5527a7766f0 ("i2c: Add SMBus alert support") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[wsa: it also fixed an interrupt storm in one of my experiments] Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[wsa: rebased, moved a comment as well, improved the 'invalid' value] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
Since then, similar errata have been published for a number of other Arm
Ltd CPUs, for which the same mitigation is sufficient. This is described
in their respective Software Developer Errata Notice (SDEN) documents:
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number and some CPUs have multiple
erratum numbers for the same HW issue.
On parts without SB, it is necessary to use ISB for the workaround. The
spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB"
sequence in this case, which is sufficient on all affected parts.
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list. The list is sorted alphanumerically (involving
moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and
potentially extend again in future. The Kconfig text is also updated to
clarify the set of affected parts and the mitigation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for Cortex-X4 and Neoverse-V3, in commit:
Since then, similar errata have been published for a number of other Arm Ltd
CPUs, for which the mitigation is the same. This is described in their
respective SDEN documents:
Note that due to shared design lineage, some CPUs share the same erratum
number.
Add these to the existing mitigation under CONFIG_ARM64_ERRATUM_3194386.
As listing all of the erratum IDs in the runtime description would be
unwieldy, this is reduced to:
"SSBS not fully self-synchronizing"
... matching the description of the errata in all of the SDENs.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240603111812.1514101-6-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Cortex-X4 erratum 3194386 and Neoverse-V3 erratum 3312417 are identical,
with duplicate Kconfig text and some unsightly ifdeffery. While we try
to share code behind CONFIG_ARM64_WORKAROUND_SPECULATIVE_SSBS, having
separate options results in a fair amount of boilerplate code, and this
will only get worse as we expand the set of affected CPUs.
To reduce this boilerplate, unify the two behind a common Kconfig
option. This removes the duplicate text and Kconfig logic, and removes
the need for the intermediate ARM64_WORKAROUND_SPECULATIVE_SSBS option.
The set of affected CPUs is described as a list so that this can easily
be extended.
I've used ARM64_ERRATUM_3194386 (matching the Neoverse-V3 erratum ID) as
the common option, matching the way we use ARM64_ERRATUM_1319367 to
cover Cortex-A57 erratum 1319537 and Cortex-A72 erratum 1319367.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240603111812.1514101-5-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ Mark: trivial backport ] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb
for GSO packets.
The function already checks that a checksum requested with
VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets
this might not hold for segs after segmentation.
Syzkaller demonstrated to reach this warning in skb_checksum_help
offset = skb_checksum_start_offset(skb);
ret = -EINVAL;
if (WARN_ON_ONCE(offset >= skb_headlen(skb)))
csum_offset: for GSO packets, deduce the correct value from gso_type.
This is already done for USO. Extend it to TSO. Let UFO be:
udp[46]_ufo_fragment ignores these fields and always computes the
checksum in software.
csum_start: finding the real offset requires parsing to the transport
header. Do not add a parser, use existing segmentation parsing. Thanks
to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded.
Again test both TSO and USO. Do not test UFO for the above reason, and
do not test UDP tunnel offload.
GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be
CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit
from devices with no checksum offload"), but then still these fields
are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no
need to test for ip_summed == CHECKSUM_PARTIAL first.
This revises an existing fix mentioned in the Fixes tag, which broke
small packets with GSO offload, as detected by kselftests.
In extreme test scenarios:
the 14th field utime in /proc/xx/stat is greater than sum_exec_runtime,
utime = 18446744073709518790 ns, rtime = 135989749728000 ns
In cputime_adjust() process, stime is greater than rtime due to
mul_u64_u64_div_u64() precision problem.
before call mul_u64_u64_div_u64(),
stime = 175136586720000, rtime = 135989749728000, utime = 1416780000.
after call mul_u64_u64_div_u64(),
stime = 135989949653530
Trigger condition:
1). User task run in kernel mode most of time
2). ARM64 architecture
3). TICK_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
Fix mul_u64_u64_div_u64() conversion precision by reset stime to rtime
lpic_gsi_to_irq() should return a valid Linux interrupt number if
acpi_register_gsi() succeeds, and return 0 otherwise. But lpic_gsi_to_irq()
converts a negative return value of acpi_register_gsi() to a positive value
silently.
Convert the return value explicitly.
Fixes: e8bba72b396c ("irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch") Reported-by: Miao Wang <shankerwangmiao@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240723064508.35560-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4670c8c3fb04 ("media: ipu-bridge: Fix Kconfig dependencies") changed
how IPU_BRIDGE dependencies are handled for all drivers, but the IPU6
variant was added the old way, which causes build time warnings when I2C is
turned off:
Some firmware versions of the 9600 series SAS HBA byte-swap the REPORT
ZONES command reply buffer from ATA-ZAC devices by directly accessing the
buffer in the host memory. This does not respect the default command DMA
direction and causes IOMMU page faults on architectures with an IOMMU
enforcing write-only mappings for DMA_FROM_DEVICE DMA driection (e.g. AMD
hosts).
Avoid such issue by always mapping the buffer of REPORT ZONES commands
using DMA_BIDIRECTIONAL (read+write IOMMU mapping). This is done by
introducing the helper function _base_scsi_dma_map() and using this helper
in _base_build_sg_scmd() and _base_build_sg_scmd_ieee() instead of calling
directly scsi_dma_map().
Fixes: 471ef9d4e498 ("mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAs") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240719073913.179559-3-dlemoal@kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The offending commit tried to suppress a double "Starting disk" message for
some drivers, but instead started spamming the log with bogus messages
every five seconds:
[ 311.798956] sd 0:0:0:0: [sda] Starting disk
[ 316.919103] sd 0:0:0:0: [sda] Starting disk
[ 322.040775] sd 0:0:0:0: [sda] Starting disk
[ 327.161140] sd 0:0:0:0: [sda] Starting disk
[ 332.281352] sd 0:0:0:0: [sda] Starting disk
[ 337.401878] sd 0:0:0:0: [sda] Starting disk
[ 342.521527] sd 0:0:0:0: [sda] Starting disk
[ 345.850401] sd 0:0:0:0: [sda] Starting disk
[ 350.967132] sd 0:0:0:0: [sda] Starting disk
[ 356.090454] sd 0:0:0:0: [sda] Starting disk
...
on machines that do not actually stop the disk on runtime suspend (e.g.
the Qualcomm sc8280xp CRD with UFS).
Let's just revert for now to address the regression.
Fixes: 7a6bbc2829d4 ("scsi: sd: Do not repeat the starting disk message") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240716161101.30692-1-johan+linaro@kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current "nretries > 1 || nretries >= max_retries" check in
cs_watchdog_read() will always evaluate to true, and thus pr_warn(), if
nretries is greater than 1. The intent is instead to never warn on the
first try, but otherwise warn if the successful retry was the last retry.
Therefore, change that "||" to "&&".
Fixes: db3a34e17433 ("clocksource: Retry clock read if long delays detected") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240802154618.4149953-2-paulmck@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel sleep profile is no longer working due to a recursive locking
bug introduced by commit 42a20f86dc19 ("sched: Add wrapper for get_wchan()
to keep task blocked")
Booting with the 'profile=sleep' kernel command line option added or
executing
# echo -n sleep > /sys/kernel/profiling
after boot causes the system to lock up.
Lockdep reports
kthreadd/3 is trying to acquire lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: get_wchan+0x32/0x70
but task is already holding lock: ffff93ac82e08d58 (&p->pi_lock){....}-{2:2}, at: try_to_wake_up+0x53/0x370
However, since nobody noticed this regression for more than two years,
let's remove 'profile=sleep' support based on the assumption that nobody
needs this functionality.
In 782f8906f805 the freeing of kfence objects was moved from deep
inside do_slab_free to the wrapper functions outside. This is a nice
change, but unfortunately it missed one spot in __kmem_cache_free_bulk.
This results in a crash like this:
BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840
We've observed NFS clients with sync tasks sleeping in __rpc_execute
waiting on RPC_TASK_QUEUED that have not responded to a wake-up from
rpc_make_runnable(). I suspect this problem usually goes unnoticed,
because on a busy client the task will eventually be re-awoken by another
task completion or xprt event. However, if the state manager is draining
the slot table, a sync task missing a wake-up can result in a hung client.
We've been able to prove that the waker in rpc_make_runnable() successfully
calls wake_up_bit() (ie- there's no race to tk_runstate), but the
wake_up_bit() call fails to wake the waiter. I suspect the waker is
missing the load of the bit's wait_queue_head, so waitqueue_active() is
false. There are some very helpful comments about this problem above
wake_up_bit(), prepare_to_wait(), and waitqueue_active().
Fix this by inserting smp_mb__after_atomic() before the wake_up_bit(),
which pairs with prepare_to_wait() calling set_current_state().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Test case: 2 threads write short inline data to a file.
In ext4_page_mkwrite the resulting inline data is converted.
Handling ext4_grp_locked_error with description "block bitmap
and bg descriptor inconsistent: X vs Y free clusters" calls
ext4_force_shutdown. The conversion clears
EXT4_STATE_MAY_INLINE_DATA but fails for
ext4_destroy_inline_data_nolock and ext4_mark_iloc_dirty due
to ext4_forced_shutdown. The restoration of inline data fails
for the same reason not setting EXT4_STATE_MAY_INLINE_DATA.
Without the flag set a regular process path in ext4_da_write_end
follows trying to dereference page folio private pointer that has
not been set. The fix calls early return with -EIO error shall the
pointer to private be NULL.
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tuner_remove <= free dvb_frontend
...
request_firmware_work_func <= the firmware is ready
load_firmware_cb <= but now the dvb_frontend has been freed
To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is
null, report a warning and just return.
[1]:
==================================================================
BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0
Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504
This error happens when the color log tries to read the gamut remap
information from DCN401 which is not initialized in the dcn401_dpp_funcs
which leads to a null pointer dereference. This commit addresses this
issue by adding a proper guard to access the gamut_remap callback in
case the specific ASIC did not implement this function.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bandwidth fixup quirk doesn't know that SuperSpeed exists and has
the same 8 service intervals per millisecond as High Speed, hence its
calculations are wrong.
Assume that all speeds from HS up use 8 intervals per millisecond.
No further changes are needed, updated code has been confirmed to work
with all speeds from FS to SS.
Some SunplusIT cameras took a borderline interpretation of the UVC 1.5
standard, and fill the PTS and SCR fields with invalid data if the
package does not contain data.
"STC must be captured when the first video data of a video frame is put
on the USB bus."
Some SunplusIT devices send, e.g.,
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a
While the UVC specification meant that the first two packets shouldn't
have had the SCR bit set in the header.
This borderline/buggy interpretation has been implemented in a variety
of devices, from directly SunplusIT and from other OEMs that rebrand
SunplusIT products. So quirking based on VID:PID will be problematic.
All the affected modules have the following extension unit:
VideoControl Interface Descriptor:
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d}
But the vendor plans to use that GUID in the future and fix the bug,
this means that we should use heuristic to figure out the broken
packets.
This patch takes care of this.
lsusb of one of the affected cameras:
Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1bcf Sunplus Innovation Technology Inc.
idProduct 0x2a01
bcdDevice 0.02
iManufacturer 1 SunplusIT Inc
iProduct 2 HanChen Wise Camera
iSerial 3 01.00.00
bNumConfigurations 1
Checks null pointer before passing variables to functions.
This fixes 3 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[why]
There are cases where update pipe params could fail but dpp pipes are already
added to the state. In this case, we should remove dpp pipes so dc state is
restored back. If it is not restored, dc state is corrupted after calling this
function, so if we call the same interface with the corrupted state again, we
may end up programming pipe topology based on a corrupted dc state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
When unplug one of monitors connected after mst hub, encounter null pointer dereference.
It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When
commit new state which directly referring to info stored in dc_sink will cause null pointer
dereference.
[how]
Remove redundant checking condition. Relevant condition should already be covered by checking
if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[why]
We need to decrease ODM slice when adding or removing planes because MPO
support takes precedence over dynamic ODM combine. However there is a case where
we remove ODM combine even for ODM combine required timing in the initial new
dc state. This is normally okay because ODM will be added back after we pass DML
bandwidth validation. However since we remove ODM combine in the initial new
state, the previous ODM pipe allocation is lost. This may cause the new plane to
take away the original secondary OPP head pipe that is still required in the new
state.
For a timing that requires ODM 2:1 but optimized with ODM 4:1, if we add an MPO
plane, we will not have enough pipe to preserve ODM 4:1. In this case we should
reduce ODM slice count then try to add the MPO plane again. By reducing, we are
gradually remove 1 ODM slice from right most side one at a time until we have
enough free pipes for the new plane. If we remove ODM combine entirely, we could
use the pipe at ODM slice index 1 as a DPP pipe for the new plane. But ODM slice
1 is still needed as the timing requires ODM 2:1. This transition is not
seamless and user will see corruption on the screen.
[how]
Remove single ODM slice one at time until we have enough pipes for a new plane.
Remove previous logic to always remove ODM combine entirely.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
We can hang in place trying to send commands when the DMCUB isn't
powered on.
[How]
For functions that execute within a DC context or DC lock we can wrap
the direct calls to dm_execute_dmub_cmd/list with code that exits idle
power optimizations and reallows once we're done with the command
submission on success.
For DM direct submissions the DM will need to manage the enter/exit
sequencing manually.
We cannot invoke a DMCUB command directly within the DM execution helper
or we can deadlock.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no need to add a lock in s_ctrl callback, it has been
synchronized by the ctrl_handler's lock, otherwise it may led to
a deadlock if the driver calls v4l2_ctrl_s_ctrl().
Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit adds null checks for the 'stream' and 'plane' variables in
the dcn30_apply_idle_power_optimizations function. These variables were
previously assumed to be null at line 922, but they were used later in
the code without checking if they were null. This could potentially lead
to a null pointer dereference, which would cause a crash.
The null checks ensure that 'stream' and 'plane' are not null before
they are used, preventing potential crashes.
Fixes the below static smatch checker:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922)
Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
flush_gpu_tlb may be called from another thread while
device_gpu_recover is running.
Both of these threads access registers through the VF
RLCG interface during VF Full Access. Add a lock around this interface
to prevent race conditions between these threads.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Zhigang Luo <zhigang.luo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Check the pointer value to fix potential null pointer
dereference
Acked-by: Yang Wang<kevinyang.wang@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
optimize the code to avoid pass a null pointer (hwmgr->backend)
to function smu7_update_edc_leakage_table.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reorder the xe_sched_tdr_queue_imm and set_exec_queue_banned calls in
guc_exec_queue_stop. This prevents a possible race condition between
the two events in which it's possible for xe_sched_tdr_queue_imm to
wake the ufence waiter before the exec queue is banned, causing the
ufence waiter to miss the banned state.
Suggested-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240510194540.3246991-1-jonathan.cavitt@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Analysis of code by Coverity, a static code analyser, has identified
a resource leak in the symbol hmm_range. This leak occurs when one of
the prior steps before it is released encounters an error.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Function .set_power_profile_mode need an array as input
parameter. So define variable workload as an array to fix
the below coverity warning.
"Passing &workload to function hwmgr->hwmgr_func->set_power_profile_mode
which uses it as an array. This might corrupt or misinterpret adjacent
memory locations"
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clear resource leak warning that when the prepare fails,
the allocated amdgpu job object will never be released.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
TCON data is corrupted after electro static discharge test.
Once the TCON data get corrupted, they will get themselves
reset and send HPD_IRQ to source side.
[How]
Support HPD_IRQ for internal link, and restore the PSR/Replay setup.
Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Sung-huai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is really easy to introduce subtle deadlocks in
preempt_fence_work_func() since we operate on single global ordered-wq
for signalling our preempt fences behind the scenes, so even though we
signal a particular fence, everything in the callback should be in the
fence critical section, since blocking in the callback will prevent
other published fences from signalling. If we enlarge the fence critical
section to cover the entire callback, then lockdep should be able to
understand this better, and complain if we grab a sensitive lock like
vm->lock, which is also held when waiting on preempt fences.
When unload the btnxpuart driver, its associated timer will be deleted.
If the timer happens to be modified at this moment, it leads to the
kernel call this timer even after the driver unloaded, resulting in
kernel panic.
Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we failed to link a free space entry because there's already a
conflicting entry for the same offset, we free the free space entry but
we don't free the associated bitmap that we had just allocated before.
Fix that by freeing the bitmap before freeing the entry.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is because we update and read last_trans concurrently without any
type of synchronization. This should be generally harmless and in the
worst case it can make us do extra locking (btrfs_record_root_in_trans())
trigger some warnings at ctree.c or do extra work during relocation - this
would probably only happen in case of load or store tearing.
So fix this by always reading and updating the field using READ_ONCE()
and WRITE_ONCE(), this silences KCSAN and prevents load and store tearing.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of using an if-else statement when processing the extent item at
btrfs_lookup_extent_info(), use a single if statement for the error case
since it does a goto at the end and leave the success (expected) case
following the if statement, reducing indentation and making the logic a
bit easier to follow. Also make the if statement's condition as unlikely
since it's not expected to ever happen, as it signals some corruption,
making it clear and hint the compiler to generate more efficient code.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When freeing a tree block, at btrfs_free_tree_block(), if we fail to
create a delayed reference we don't deal with the error and just do a
BUG_ON(). The error most likely to happen is -ENOMEM, and we have a
comment mentioning that only -ENOMEM can happen, but that is not true,
because in case qgroups are enabled any error returned from
btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned
from btrfs_search_slot() for example) can be propagated back to
btrfs_free_tree_block().
So stop doing a BUG_ON() and return the error to the callers and make
them abort the transaction to prevent leaking space. Syzbot was
triggering this, likely due to memory allocation failure injection.
Reported-by: syzbot+a306f914b4d01b3958fe@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000fcba1e05e998263c@google.com/ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dmesg includes the following rsv leak detection warning (all call
trace skipped):
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8653 btrfs_destroy_inode+0x1e0/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8654 btrfs_destroy_inode+0x1a8/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8660 btrfs_destroy_inode+0x1a0/0x200 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): last unmount of filesystem 1b4abba9-de34-4f07-9e7f-157cf12a18d6
------------[ cut here ]------------
WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): space_info DATA has 268218368 free, is not full
BTRFS info (device sda): space_info total=268435456, used=204800, pinned=0, reserved=0, may_use=12288, readonly=0 zone_unusable=0
BTRFS info (device sda): global_block_rsv: size 0 reserved 0
BTRFS info (device sda): trans_block_rsv: size 0 reserved 0
BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0
------------[ cut here ]------------
WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs]
---[ end trace 0000000000000000 ]---
BTRFS info (device sda): space_info METADATA has 267796480 free, is not full
BTRFS info (device sda): space_info total=268435456, used=131072, pinned=0, reserved=0, may_use=262144, readonly=0 zone_unusable=245760
BTRFS info (device sda): global_block_rsv: size 0 reserved 0
BTRFS info (device sda): trans_block_rsv: size 0 reserved 0
BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0
BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0
Above $dev is a tcmu-runner emulated zoned HDD, which has a max zone
append size of 64K, and the system has 64K page size.
[CAUSE]
I have added several trace_printk() to show the events (header skipped):
> btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688
> btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288
> btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536
> btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864
The above lines show our buffered write has dirtied 3 pages of inode
259 of root 5:
704K 768K 832K 896K
I |////I/////////////////I///////////| I
756K 868K
|///| is the dirtied range using subpage bitmaps. and 'I' is the page
boundary.
Meanwhile all three pages (704K, 768K, 832K) have their PageDirty
flag set.
> btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400
Then direct IO write starts, since the range [680K, 780K) covers the
beginning part of the above dirty range, we need to writeback the
two pages at 704K and 768K.
Now the above 2 lines show that we're writing back for dirty range
[756K, 756K + 64K).
We only writeback 64K because the zoned device has max zone append size
as 64K.
> extent_write_locked_range: r/i=5/259 clear dirty for page=786432
!!! The above line shows the root cause. !!!
We're calling clear_page_dirty_for_io() inside extent_write_locked_range(),
for the page 768K.
This is because extent_write_locked_range() can go beyond the current
locked page, here we hit the page at 768K and clear its page dirt.
In fact this would lead to the desync between subpage dirty and page
dirty flags. We have the page dirty flag cleared, but the subpage range
[820K, 832K) is still dirty.
After the writeback of range [756K, 820K), the dirty flags look like
this, as page 768K no longer has dirty flag set.
704K 768K 832K 896K
I I | I/////////////| I
820K 868K
This means we will no longer writeback range [820K, 832K), thus the
reserved data/metadata space would never be properly released.
Now we writeback the remaining dirty range, which is [832K, 868K).
Causing the range [820K, 832K) never to be submitted, thus leaking the
reserved space.
This bug only affects subpage and zoned case. For non-subpage and zoned
case, we have exactly one sector for each page, thus no such partial dirty
cases.
For subpage and non-zoned case, we never go into run_delalloc_cow(), and
normally all the dirty subpage ranges would be properly submitted inside
__extent_writepage_io().
[FIX]
Just do not clear the page dirty at all inside extent_write_locked_range().
As __extent_writepage_io() would do a more accurate, subpage compatible
clear for page and subpage dirty flags anyway.
Now the correct trace would look like this:
> btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688
> btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288
> btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536
> btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864
The driver triggers a "Secondary Bus Reset" (SBR) by calling
__pci_reset_function_locked() which asserts the SBR bit in the "Bridge
Control Register" in the configuration space of the upstream bridge for
2ms. This is done without locking the configuration space of the
upstream bridge port, allowing user space to access it concurrently.
Linux 6.11 will start warning about such unlocked resets [1][2]:
pcieport 0000:00:01.0: unlocked secondary bus reset via: pci_reset_bus_function+0x51c/0x6a0
Avoid the warning and the concurrent access by locking the configuration
space of the upstream bridge prior to the reset and unlocking it
afterwards.
On sa8775p-ride-r3 the RX clocks from the AQR115C PHY are not available at
the time of the DMA reset. We can however extract the RX clock from the
internal SERDES block. Once the link is up, we can revert to the
previous state.
The AQR115C PHY doesn't support in-band signalling so we can count on
getting the link up notification and safely reuse existing callbacks
which are already used by another HW quirk workaround which enables the
functional clock to avoid a DMA reset due to timeout.
Only enable loopback on revision 3 of the board - check the phy_mode to
make sure.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240703181500.28491-3-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch updates the workaround for a problem similar to erratum
DS80000789E 6 of the mcp2518fd, the other variants of the chip
family (mcp2517fd and mcp251863) are probably also affected.
Erratum DS80000789E 6 says "reading of the FIFOCI bits in the FIFOSTA
register for an RX FIFO may be corrupted". However observation shows
that this problem is not limited to RX FIFOs but also effects the TEF
FIFO.
In the bad case, the driver reads a too large head index. As the FIFO
is implemented as a ring buffer, this results in re-handling old CAN
transmit complete events.
Every transmit complete event contains with a sequence number that
equals to the sequence number of the corresponding TX request. This
way old TX complete events can be detected.
If the original driver detects a non matching sequence number, it
prints an info message and tries again later. As wrong sequence
numbers can be explained by the erratum DS80000789E 6, demote the info
message to debug level, streamline the code and update the comments.
Keep the behavior: If an old CAN TX complete event is detected, abort
the iteration and mark the number of valid CAN TX complete events as
processed in the chip by incrementing the FIFO's tail index.
Cc: Stefan Althöfer <Stefan.Althoefer@janztec.com> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is a preparatory patch to work around a problem similar to
erratum DS80000789E 6 of the mcp2518fd, the other variants of the chip
family (mcp2517fd and mcp251863) are probably also affected.
Erratum DS80000789E 6 says "reading of the FIFOCI bits in the FIFOSTA
register for an RX FIFO may be corrupted". However observation shows
that this problem is not limited to RX FIFOs but also effects the TEF
FIFO.
When handling the TEF interrupt, the driver reads the FIFO header
index from the TEF FIFO STA register of the chip.
In the bad case, the driver reads a too large head index. In the
original code, the driver always trusted the read value, which caused
old CAN transmit complete events that were already processed to be
re-processed.
Instead of reading and trusting the head index, read the head index
and calculate the number of CAN frames that were supposedly received -
replace mcp251xfd_tef_ring_update() with mcp251xfd_get_tef_len().
The mcp251xfd_handle_tefif() function reads the CAN transmit complete
events from the chip, iterates over them and pushes them into the
network stack. The original driver already contains code to detect old
CAN transmit complete events, that will be updated in the next patch.
Cc: Stefan Althöfer <Stefan.Althoefer@janztec.com> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a key is requested by userspace, there's really no need
to include the key data, the sequence counter is really what
userspace needs in this case. The fact that it's included is
just a historic quirk.
Currently, it's possible to pass in a modified CONST_PTR_TO_DYNPTR to
a global function as an argument. The adverse effects of this is that
BPF helpers can continue to make use of this modified
CONST_PTR_TO_DYNPTR from within the context of the global function,
which can unintentionally result in out-of-bounds memory accesses and
therefore compromise overall system stability i.e.
Add a check_func_arg_reg_off() to the path in which the BPF verifier
verifies the arguments of global function arguments, specifically
those which take an argument of type ARG_PTR_TO_DYNPTR |
MEM_RDONLY. Also, process_dynptr_func() doesn't appear to perform any
explicit and strict type matching on the supplied register type, so
let's also enforce that a register either type PTR_TO_STACK or
CONST_PTR_TO_DYNPTR is by the caller.
In MLD connection, link_data/link_conf are dynamically allocated. They
don't point to vif->bss_conf. So, there will be no chanreq assigned to
vif->bss_conf and then the chan will be NULL. Tweak the code to check
ht_supported/vht_supported/has_he/has_eht on sta deflink.
Crash log (with rtw89 version under MLO development):
[ 9890.526087] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 9890.526102] #PF: supervisor read access in kernel mode
[ 9890.526105] #PF: error_code(0x0000) - not-present page
[ 9890.526109] PGD 0 P4D 0
[ 9890.526114] Oops: 0000 [#1] PREEMPT SMP PTI
[ 9890.526119] CPU: 2 PID: 6367 Comm: kworker/u16:2 Kdump: loaded Tainted: G OE 6.9.0 #1
[ 9890.526123] Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB3WW (2.73 ) 11/28/2018
[ 9890.526126] Workqueue: phy2 rtw89_core_ba_work [rtw89_core]
[ 9890.526203] RIP: 0010:ieee80211_start_tx_ba_session (net/mac80211/agg-tx.c:618 (discriminator 1)) mac80211
[ 9890.526279] Code: f7 e8 d5 93 3e ea 48 83 c4 28 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 49 8b 84 24 e0 f1 ff ff 48 8b 80 90 1b 00 00 <83> 38 03 0f 84 37 fe ff ff bb ea ff ff ff eb cc 49 8b 84 24 10 f3
All code
========
0: f7 e8 imul %eax
2: d5 (bad)
3: 93 xchg %eax,%ebx
4: 3e ea ds (bad)
6: 48 83 c4 28 add $0x28,%rsp
a: 89 d8 mov %ebx,%eax
c: 5b pop %rbx
d: 41 5c pop %r12
f: 41 5d pop %r13
11: 41 5e pop %r14
13: 41 5f pop %r15
15: 5d pop %rbp
16: c3 retq
17: cc int3
18: cc int3
19: cc int3
1a: cc int3
1b: 49 8b 84 24 e0 f1 ff mov -0xe20(%r12),%rax
22: ff
23: 48 8b 80 90 1b 00 00 mov 0x1b90(%rax),%rax
2a:* 83 38 03 cmpl $0x3,(%rax) <-- trapping instruction
2d: 0f 84 37 fe ff ff je 0xfffffffffffffe6a
33: bb ea ff ff ff mov $0xffffffea,%ebx
38: eb cc jmp 0x6
3a: 49 rex.WB
3b: 8b .byte 0x8b
3c: 84 24 10 test %ah,(%rax,%rdx,1)
3f: f3 repz
Add the Edimax Vendor ID (0x1432) for an ethernet driver for Tehuti
Networks TN40xx chips. This ID can be used for Realtek 8180 and Ralink
rt28xx wireless drivers.
When a SOCK_(STREAM|SEQPACKET) socket connect()s to another one, we need
to lock the two sockets to check their states in unix_stream_connect().
We use unix_state_lock() for the server and unix_state_lock_nested() for
client with tricky sk->sk_state check to avoid deadlock.
The possible deadlock scenario are the following:
1) Self connect()
2) Simultaneous connect()
The former is simple, attempt to grab the same lock, and the latter is
AB-BA deadlock.
After the server's unix_state_lock(), we check the server socket's state,
and if it's not TCP_LISTEN, connect() fails with -EINVAL.
Then, we avoid the former deadlock by checking the client's state before
unix_state_lock_nested(). If its state is not TCP_LISTEN, we can make
sure that the client and the server are not identical based on the state.
Also, the latter deadlock can be avoided in the same way. Due to the
server sk->sk_state requirement, AB-BA deadlock could happen only with
TCP_LISTEN sockets. So, if the client's state is TCP_LISTEN, we can
give up the second lock to avoid the deadlock.
CPU 1 CPU 2 CPU 3
connect(A -> B) connect(B -> A) listen(A)
--- --- ---
unix_state_lock(B)
B->sk_state == TCP_LISTEN
READ_ONCE(A->sk_state) == TCP_CLOSE
^^^^^^^^^
ok, will lock A unix_state_lock(A)
.--------------' WRITE_ONCE(A->sk_state, TCP_LISTEN)
| unix_state_unlock(A)
|
| unix_state_lock(A)
| A->sk_sk_state == TCP_LISTEN
| READ_ONCE(B->sk_state) == TCP_LISTEN
v ^^^^^^^^^^
unix_state_lock_nested(A) Don't lock B !!
Currently, while checking the client's state, we also check if it's
TCP_ESTABLISHED, but this is unlikely and can be checked after we know
the state is not TCP_CLOSE.
Moreover, if it happens after the second lock, we now jump to the restart
label, but it's unlikely that the server is not found during the retry,
so the jump is mostly to revist the client state check.
Let's remove the retry logic and check the state against TCP_CLOSE first.
Read 32 bits RX info to a local variable to fix race condition between
reading RX length and RX tag.
Another solution is to get RX tag at first statement, but adopted solution
can save some memory read, and also save 15 bytes binary code.
RX tag, a sequence number, is used to ensure that RX data has been DMA to
memory completely, so driver must check sequence number is expected before
reading other data.
This potential problem happens only after enabling 36-bit DMA.
Alexei reported that send_signal test may fail with nested CONFIG_PARAVIRT
configs. In this particular case, the base VM is AMD with 166 cpus, and I
run selftests with regular qemu on top of that and indeed send_signal test
failed. I also tried with an Intel box with 80 cpus and there is no issue.
In the test, two processes are communicating through pipe. Further debugging
with strace found that the above splat is triggered as read() syscall could
not receive the data even if the corresponding write() syscall in another
process successfully wrote data into the pipe.
The failed subtest is "send_signal_perf". The corresponding perf event has
sample_period 1 and config PERF_COUNT_SW_CPU_CLOCK. sample_period 1 means every
overflow event will trigger a call to the BPF program. So I suspect this may
overwhelm the system. So I increased the sample_period to 100,000 and the test
passed. The sample_period 10,000 still has the test failed.
In other parts of selftest, e.g., [1], sample_freq is used instead. So I
decided to use sample_freq = 1,000 since the test can pass as well.
When all the strides in a WQE have been consumed, the WQE is unlinked
from the WQ linked list (mlx5_wq_ll_pop()). For SHAMPO, it is possible
to receive CQEs with 0 consumed strides for the same WQE even after the
WQE is fully consumed and unlinked. This triggers an additional unlink
for the same wqe which corrupts the linked list.
Fix this scenario by accepting 0 sized consumed strides without
unlinking the WQE again.
Currently the resource allocated by crypto_alloc_shash() is not
freed in case ath12k_peer_find() fails, resulting in memory leak.
Add crypto_free_shash() to fix it.
This is found during code review, compile tested only.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240526124226.24661-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Handle error code to cause failed to USB probe result from unexpected
USB EP number, otherwise when USB disconnect skb_dequeue() an uninitialized
skb list and cause warnings below.
usb 2-1: USB disconnect, device number 76
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 54060 Comm: kworker/0:1 Not tainted 6.9.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:114
assign_lock_key kernel/locking/lockdep.c:976 [inline]
register_lock_class+0xc18/0xfa0 kernel/locking/lockdep.c:1289
__lock_acquire+0x108/0x3bc0 kernel/locking/lockdep.c:5014
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b0/0x550 kernel/locking/lockdep.c:5719
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
skb_dequeue+0x20/0x180 net/core/skbuff.c:3846
rtl_usb_cleanup drivers/net/wireless/realtek/rtlwifi/usb.c:706 [inline]
rtl_usb_deinit drivers/net/wireless/realtek/rtlwifi/usb.c:721 [inline]
rtl_usb_disconnect+0x4a4/0x850 drivers/net/wireless/realtek/rtlwifi/usb.c:1051
usb_unbind_interface+0x1e8/0x980 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:568 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:560
__device_release_driver drivers/base/dd.c:1270 [inline]
device_release_driver_internal+0x443/0x620 drivers/base/dd.c:1293
bus_remove_device+0x22f/0x420 drivers/base/bus.c:574
device_del+0x395/0x9f0 drivers/base/core.c:3909
usb_disable_device+0x360/0x7b0 drivers/usb/core/message.c:1418
usb_disconnect+0x2db/0x930 drivers/usb/core/hub.c:2305
hub_port_connect drivers/usb/core/hub.c:5362 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5662 [inline]
port_event drivers/usb/core/hub.c:5822 [inline]
hub_event+0x1e39/0x4ce0 drivers/usb/core/hub.c:5904
process_one_work+0x97b/0x1a90 kernel/workqueue.c:3267
process_scheduled_works kernel/workqueue.c:3348 [inline]
worker_thread+0x680/0xf00 kernel/workqueue.c:3429
kthread+0x2c7/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: Shichao Lai <shichaorai@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAEk6kZuuezkH1dVRJf3EAVZK-83=OpTz62qCugkpTkswj8JF6w@mail.gmail.com/T/#u Tested-by: Shichao Lai <shichaorai@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240524003248.5952-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 5082b3e3027e ("wifi: ath11k: fix race due to setting
ATH11K_FLAG_EXT_IRQ_ENABLED too early") fixes a race in ath11k
driver. Since ath12k shares the same logic as ath11k, currently
the race also exists in ath12k: in ath12k_pci_ext_irq_enable(),
ATH12K_FLAG_EXT_IRQ_ENABLED is set before NAPI is enabled.
In cases where only one MSI vector is allocated, this results
in a race condition: after ATH12K_FLAG_EXT_IRQ_ENABLED is set
but before NAPI enabled, CE interrupt breaks in. Since IRQ is
shared by CE and data path, ath12k_pci_ext_interrupt_handler()
is also called where we call disable_irq_nosync() to disable
IRQ. Then napi_schedule() is called but it does nothing because
NAPI is not enabled at that time, meaning that
ath12k_pci_ext_grp_napi_poll() will never run, so we have
no chance to call enable_irq() to enable IRQ back. Since IRQ
is shared, all interrupts are disabled and we would finally
get no response from target.
So port ath11k fix here, this is done by setting
ATH12K_FLAG_EXT_IRQ_ENABLED after all NAPI and IRQ work are
done. With the fix, we are sure that by the time
ATH12K_FLAG_EXT_IRQ_ENABLED is set, NAPI is enabled.
Note that the fix above also introduce some side effects:
if ath12k_pci_ext_interrupt_handler() breaks in after NAPI
enabled but before ATH12K_FLAG_EXT_IRQ_ENABLED set, nothing
will be done by the handler this time, the work will be
postponed till the next time the IRQ fires.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240524023642.37030-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that.
The Intel Software Developer's Manual defines the scope of HFI (registers
and memory buffer) as a package. Use package scope(*) in the software
representation of an HFI instance.
Using die scope in HFI instances has the effect of creating multiple
conflicting instances for the same package: each instance allocates its
own memory buffer and configures the same package-level registers.
Specifically, only one of the allocated memory buffers can be set in the
MSR_IA32_HW_FEEDBACK_PTR register. CPUs get incorrect HFI data from the
table.
The problem does not affect current HFI-capable platforms because they
all have single-die processors.
(*) We used die scope for HFI instances because there had been
processors with packages enumerated as dies. None of those systems
supported HFI, though. If such a system emerged, it would need to
be quirked.
Similar to other Asus Vivobooks, the Asus Vivobook Pro N6506MJ has a DSDT table
that describes IRQ 1 as ActiveLow, whereas the kernel overrides it to Edge_High.
This discrepancy prevents the internal keyboard from functioning properly. This
patch resolves this issue by adding this laptop to the override table that prevents
the kernel from overriding this IRQ.
Like various other Asus laptops, the Asus Vivobook Pro N6506MV has a
DSDT table that describes IRQ 1 as ActiveLow while the kernel is overriding
it to Edge_High. This prevents the internal keyboard from working. This patch
prevents this issue by adding this laptop to the override table that prevents
the kernel from overriding this IRQ
irqfd_wakeup() gets EPOLLHUP, when it is called by
eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which
gets called under spin_lock_irqsave(). We can't use a mutex here as it
will lead to a deadlock.
The multiple BWMONv4 instances available on the X1E80100 SoC use the
same interrupt number. Mark them are shared to allow for re-use across
instances.
Using IRQF_SHARED coupled with devm_request_threaded_irq implies that
the irq can still trigger during/after bwmon_remove due to other active
bwmon instances. Handle this race by relying on bwmon_disable to disable
the interrupt and coupled with explicit request/free irqs.
If the `amd-pstate` driver is not loaded automatically by default,
it is because the kernel command line parameter has not been added.
To resolve this issue, it is necessary to call the `amd_pstate_set_driver()`
function to enable the desired mode (passive/active/guided) before registering
the driver instance.
This ensures that the driver is loaded correctly without relying on the kernel
command line parameter.
When there is no parameter added to command line, Kernel config will
provide the default mode to load.
Meanwhile, user can add driver mode in command line which will override
the kernel config default option.
Reported-by: Andrei Amuraritei <andamu@posteo.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218705 Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/83301c4cea4f92fb19e14b23f2bac7facfd8bdbb.1718811234.git.perry.yuan@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The EPP string for 'default' represents what the firmware had configured
as the default EPP value but once a user changes EPP to another string
they can't reset it back to 'default'.
Cache the firmware EPP value and allow the user to write 'default' using
this value.
Reported-by: Artem S. Tashkinov <aros@gmx.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217931#c61 Reviewed-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This ensures that the attribute is created before the device is
announced to userspace, avoiding a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Let the power supply core register the attribute.
This ensures that the attribute is created before the device is
announced to userspace, avoid a race condition.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a race condition in the CMT interrupt handler. In the interrupt
handler the driver sets a driver private flag, FLAG_IRQCONTEXT. This
flag is used to indicate any call to set_next_event() should not be
directly propagated to the device, but instead cached. This is done as
the interrupt handler itself reprograms the device when needed before it
completes and this avoids this operation to take place twice.
It is unclear why this design was chosen, my suspicion is to allow the
struct clock_event_device.event_handler callback, which is called while
the FLAG_IRQCONTEXT is set, can update the next event without having to
write to the device twice.
Unfortunately there is a race between when the FLAG_IRQCONTEXT flag is
set and later cleared where the interrupt handler have already started to
write the next event to the device. If set_next_event() is called in
this window the value is only cached in the driver but not written. This
leads to the board to misbehave, or worse lockup and produce a splat.
The design have been part of the driver since it was first merged in
early 2009. It becomes increasingly harder to trigger the issue the
older kernel version one tries. It only takes a few boots on v6.10-rc5,
while hundreds of boots are needed to trigger it on v5.10.
Close the race condition by using the CMT channel lock for the two
competing sections. The channel lock was added to the driver after its
initial design.
When rcu_barrier() calls rcu_rdp_cpu_online() and observes a CPU off
rnp->qsmaskinitnext, it means that all accesses from the offline CPU
preceding the CPUHP_TEARDOWN_CPU are visible to RCU barrier, including
callbacks expiration and counter updates.
However interrupts can still fire after stop_machine() re-enables
interrupts and before rcutree_report_cpu_dead(). The related accesses
happening between CPUHP_TEARDOWN_CPU and rnp->qsmaskinitnext clearing
are _NOT_ guaranteed to be seen by rcu_barrier() without proper
ordering, especially when callbacks are invoked there to the end, making
rcutree_migrate_callback() bypass barrier_lock.
The following theoretical race example can make rcu_barrier() hang:
CPU 0 CPU 1
----- -----
//cpu_down()
smpboot_park_threads()
//ksoftirqd is parked now
<IRQ>
rcu_sched_clock_irq()
invoke_rcu_core()
do_softirq()
rcu_core()
rcu_do_batch()
// callback storm
// rcu_do_batch() returns
// before completing all
// of them
// do_softirq also returns early because of
// timeout. It defers to ksoftirqd but
// it's parked
</IRQ>
stop_machine()
take_cpu_down()
rcu_barrier()
spin_lock(barrier_lock)
// observes rcu_segcblist_n_cbs(&rdp->cblist) != 0
<IRQ>
do_softirq()
rcu_core()
rcu_do_batch()
//completes all pending callbacks
//smp_mb() implied _after_ callback number dec
</IRQ>
rcutree_migrate_callback()
// no callback, early return without locking
// barrier_lock
//observes !rcu_rdp_cpu_online(rdp)
rcu_barrier_entrain()
rcu_segcblist_entrain()
// Observe rcu_segcblist_n_cbs(rsclp) == 0
// because no barrier between reading
// rnp->qsmaskinitnext and rsclp->len
rcu_segcblist_add_len()
smp_mb__before_atomic()
// will now observe the 0 count and empty
// list, but too late, we enqueue regardless
WRITE_ONCE(rsclp->len, rsclp->len + v);
// ignored barrier callback
// rcu barrier stall...
This could be solved with a read memory barrier, enforcing the message
passing between rnp->qsmaskinitnext and rsclp->len, matching the full
memory barrier after rsclp->len addition in rcu_segcblist_add_len()
performed at the end of rcu_do_batch().
However the rcu_barrier() is complicated enough and probably doesn't
need too many more subtleties. CPU down is a slowpath and the
barrier_lock seldom contended. Solve the issue with unconditionally
locking the barrier_lock on rcutree_migrate_callbacks(). This makes sure
that either rcu_barrier() sees the empty queue or its entrained
callback will be migrated.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we allocate a bio that is larger than NVMe maximum request size,
attach integrity metadata to it and send it to the NVMe subsystem, the
integrity metadata will be corrupted.
Splitting the bio works correctly. The function bio_split will clone the
bio, trim the iterator of the first bio and advance the iterator of the
second bio.
However, the function rq_integrity_vec has a bug - it returns the first
vector of the bio's metadata and completely disregards the metadata
iterator that was advanced when the bio was split. Thus, the second bio
uses the same metadata as the first bio and this leads to metadata
corruption.
This commit changes rq_integrity_vec, so that it calls mp_bvec_iter_bvec
instead of returning the first vector. mp_bvec_iter_bvec reads the
iterator and uses it to build a bvec for the current position in the
iterator.
The "queue_max_integrity_segments(rq->q) > 1" check was removed, because
the updated rq_integrity_vec function works correctly with multiple
segments.
Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl.
Split the allocation side out to make the error handling boundary easier
to navigate. The apple driver had been doing this wrong, leaking the
controller device memory on a tagset failure.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
KCSAN has identified a potential data race in debugobjects, where the
global variable debug_objects_maxchain is accessed for both reading and
writing simultaneously in separate and parallel data paths. This results in
the following splat printed by KCSAN:
BUG: KCSAN: data-race in debug_check_no_obj_freed / debug_object_activate
write to 0xffffffff847ccfc8 of 4 bytes by task 734 on cpu 41:
debug_object_activate (lib/debugobjects.c:199 lib/debugobjects.c:564 lib/debugobjects.c:710)
call_rcu (kernel/rcu/rcu.h:227 kernel/rcu/tree.c:2719 kernel/rcu/tree.c:2838)
security_inode_free (security/security.c:1626)
__destroy_inode (./include/linux/fsnotify.h:222 fs/inode.c:287)
...
read to 0xffffffff847ccfc8 of 4 bytes by task 384 on cpu 31:
debug_check_no_obj_freed (lib/debugobjects.c:1000 lib/debugobjects.c:1019)
kfree (mm/slub.c:2081 mm/slub.c:4280 mm/slub.c:4390)
percpu_ref_exit (lib/percpu-refcount.c:147)
css_free_rwork_fn (kernel/cgroup/cgroup.c:5357)
...
value changed: 0x00000070 -> 0x00000071
The data race is actually harmless as this is just used for debugfs
statistics, as all other debug variables.
Annotate all debug variables as racy explicitly, since these variables
are known to be racy and harmless.
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Commit cc27b0c78c79 ("md: fix deadlock between mddev_suspend() and
md_write_start()") aborted md_write_start() with false when mddev is
suspended, which fixed a deadlock if calling mddev_suspend() with
holding reconfig_mutex(). Since mddev_suspend() now includes
lockdep_assert_not_held(), it no longer holds the reconfig_mutex. This
makes previous abort unnecessary. Now, remove unnecessary abort and
change function return value to void.
projects / thirdparty / kernel / stable.git / log
