Merge tag 'aspeed-6.18-devicetree-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
Further ASPEED devicetree updates for v6.18
New platforms:
- Meta Clemente
Clemente is a compute-tray platform using an AST2600 SoC
Updated platforms:
- Harma (Meta): Hot-swap controller, power monitoring, GPIO names
There are also some devicetree cleanups from Rob and Krzysztof that touch a
variety of platforms and the DTSIs. These lead to fewer warnings emitted for the
ASPEED devicetrees.
* tag 'aspeed-6.18-devicetree-1' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: Drop syscon "reg-io-width" properties
ARM: dts: aspeed: Drop "sdhci" compatibles
ARM: dts: aspeed: Fix/add I2C device vendor prefixes
ARM: dts: aspeed: Minor whitespace cleanup
ARM: dts: aspeed: clemente: add Meta Clemente BMC
ARM: dts: aspeed: Add NCSI3 and NCSI4 pinctrl nodes
dt-bindings: arm: aspeed: add Meta Clemente board
ARM: dts: aspeed: harma: add mp5990
ARM: dts: aspeed: harma: revise gpio name
ARM: dts: aspeed: harma: add power monitor support
Merge tag 'tegra-for-6.18-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.18-rc1
Add I2C nodes for Tegra264. These are currently unused but are needed
for subsequent audio patches, as well as various monitoring and other
auxiliary chips.
* tag 'tegra-for-6.18-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add I2C nodes for Tegra264
Merge tag 'tegra-for-6.18-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.18-rc1
Add DFLL support on Tegra114, fix some issues on Transformer and P880
devices and add support for the ASUS Eee Pad Slider SL101.
* tag 'tegra-for-6.18-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: add support for ASUS Eee Pad Slider SL101
ARM: tegra: transformer-20: fix audio-codec interrupt
ARM: tegra: transformer-20: add missing magnetometer interrupt
ARM: tegra: Add DFLL clock support for Tegra114
ARM: tegra: p880: set correct touchscreen clipping
Merge tag 'tegra-for-6.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.18-rc1
Support for the Tegra264 generation of I2C is documented as well as some
older Tegra devices, such as the Xiaomi Mi Pad and the ASUS 101 devices.
Contained are also some additions to existing bindings for Tegra114 and
a fix for the power supply feeding VI/CSI.
* tag 'tegra-for-6.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
Merge tag 'zynqmp-dt-for-6.18' of https://github.com/Xilinx/linux-xlnx into soc/dt
arm64: Xilinx DT changes for 6.18
- Fix some issues reported by dtschema
- Properly mark EMMC devices
- Update PSCI version
- Update DP description and enable it on boards
- Disable DEBUG IPs by default
SOM:
- Describe usb hubs
- Fix PWM polarity issue
- Add support for k24, kr260 and kd240
Versal NET:
- Describe CPU cache layout
- Fix RTC calibration value
* tag 'zynqmp-dt-for-6.18' of https://github.com/Xilinx/linux-xlnx:
arm64: versal-net: Describe L1/L2/L3/LLC caches
arm64: zynqmp: Enable DP in kr260/kv260 revA
arm64: zynqmp: Describe ethernet controllers via aliases on SOM
arm64: zynqmp: Revert usb node drive strength and slew rate for zcu106
arm64: zynqmp: Disable coresight by default
arm64: zynqmp: Add support for kd240 board
arm64: zynqmp: Add support for kr260 board
dt-bindings: soc: xilinx: Add support for K24, KR260 and KD240 CCs
arm64: zynqmp: Enable PSCI 1.0
arm64: zynqmp: Enable DP for zcu100, zcu102, zcu104, zcu111
arm64: zynqmp: Introduce DP port labels
arm64: zynqmp: Fix pwm-fan polarity
arm64: zynqmp: Update the usb5744 hub node as per binding
arm64: zynqmp: Add cap-mmc-hw-reset and no-sd, no-sdio property to eMMC
arm64: zynqmp: Remove undocumented arasan,has-mdma property
arm64: zynqmp: Use generic spi@ name in zcu111-revA
arm64: versal-net: Update rtc calibration value
Merge tag 'renesas-dts-for-v6.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.18 (take two)
- Add pin control and I2C support for the RZ/N2H SoC and its
evaluation board,
- Add LED, EEPROM, eMMC, SD card, watchdog, and USB2.0 support for the
RZ/T2H and RZ/N2H SoCs and their evaluation boards,
- Add I3C support for the RZ/V2H and RZ/V2N SoCs,
- Add IMX219 and IMX462 camera overlay support for the Sparrow Hawk
board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (26 commits)
arm64: dts: renesas: sparrow-hawk-fan-pwm: Rework hwmon comment
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J2
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J1
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J2
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J1
arm64: dts: renesas: rcar: Rename dsi-encoder to dsi
arm64: dts: renesas: r9a09g056: Add I3C node
arm64: dts: renesas: r9a09g057: Add I3C node
arm64: dts: renesas: rzt2h-n2h-evk: Enable USB2.0 support
arm64: dts: renesas: r9a09g047e57-smarc: Use Schmitt input for NMI function
arm64: dts: renesas: r9a09g047e57-smarc: Fix gpio key's pin control node
arm64: dts: renesas: r9a09g047: Enable Tx coe support
arm64: dts: renesas: r9a09g087: Add USB2.0 support
arm64: dts: renesas: r9a09g077: Add USB2.0 support
arm64: dts: renesas: rzt2h-n2h-evk-common: Enable WDT2
arm64: dts: renesas: r9a09g087: Add WDT nodes
arm64: dts: renesas: r9a09g077: Add WDT nodes
arm64: dts: renesas: rzt2h-rzn2h-evk: Enable SD card slot
arm64: dts: renesas: rzt2h-rzn2h-evk: Enable MicroSD card slot
arm64: dts: renesas: rzt2h-rzn2h-evk: Enable eMMC
...
Merge tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.18
Add support for Lenovo Thinkbook 16, Dell Inspiron 7441, Dell Latitude
7455, Samsung Galaxy S20, Billion Capture+, the Monaco EVK and the
Lemans EVK.
The SDM845 Cheza development boards are removed, as they are not longer
in use.
For IPQ5018 crypto, tsens, rng, SPI NAND support is dded, the two MDIO
buses are added and the internal GE PHY.
IPQ5424 gets CPU frequency scaling and a missing UART.
The SA8775P SoC is remaned Lemans, to reduce confusion about the chip
name. The IoT memory map introduced and made the default, GDSP FastRPC
and GPR nodes are added.
Touch keys are enabled on the BQ Aquaris X5 Plus.
On QCM2290 the video accelerator is enabled, so is HS timing modes for
eMMC.
The QCS615 platform is renamed SM6150. CPU frequency scaling and the WiFi
PCIe controller is introduced.
On Monaco (QCS8300) scaling of L3 and DDR bandwidth is introduced. So is
eMMC support and generic packer router (GPR).
On the Monaco Ride board, the eMMC controller is enabled.
On QRB220 RB1, the venus video accelerator is enabled.
For SC7280 the first PCIe controller and PHY is introduced. SoundWire,
LPASS, and USB offload support is added, the codecs and sound card is
then described on the QCM6490 IDP. The MDSS core reset is introduced, to
clear bootloader configuration on SC7280-based devices.
On Fairphone5, USB audio offload is added.
AudioReach support on SC7280 (QCS6490) is introduced and used to
enable sound on the RB3Gen2 board.
The video clock controller is added to SC8180X.
On SC8280XP the GPI DMA controllers are described and enabled.
Display and GPU is enabled for the Fairphone 3 and charging is enabled
on the Google Pixel 3a.
The routing for the second USB connector on the Lenovo Yoga C630 is
described.
On SM6150 ADSP and CDSP FastRPC is introduced, as is the video
encoder/decoder (venus).
On SM6350 RPMh statistics is enabled, the USB audio offload DAI is
introduced and on Fairphone4 the USB audio offload support is enabled.
On SM8450 QRD the PMIC GLINK is described, to add USB Type-C and battery
functionality.
On SM8650 ACD levels are added for the GPU.
Camera and video clock controllers power-domains are updated on SM8450,
SM8550, and SM8650, now that support for multiple power-domains is
accepted.
SM8750 gains bwmon support for dynamic bus scaling, and PCIe nodes.
The DWC3 glue and core nodes are flattened on a number of platforms.
USB Type-C DisplayPort support is extended to 4 lanes (from 2) on a
variety of platforms, now that the QMP PHY driver supports this.
Platform specific RPMh PD constants are replaced with generic constants
wherever possible.
On X Elite the PM8010 is disabled by default, removing boot splats
on a variety of boards without this PMIC, the video clock controller is
added.
For the X Elite and X Plus CRDs, and the Lenovo Thinkpad T14s, HBR3 is
marked as valid for the external DisplayPorts. The fingerprint reader
found on the CRDs are enabled. The PCIe x8 slot on the QCP is enabled.
The two Microsoft Surface Laptop 7 gains WiFi and Bluetooth support.
GPU support is added for the X Plus SoC.
* tag 'qcom-arm64-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (208 commits)
arm64: dts: qcom: x1e80100: Update GPU OPP table
arm64: dts: qcom: sm8650: Drop redundant status from PMK8550 RTC
arm64: dts: qcom: add initial support for Samsung Galaxy S20
dt-bindings: arm: qcom: document x1q board binding
arm64: dts: qcom: sm8250-samsung-r8q: Move common parts to dtsi
arm64: dts: qcom: lemans-evk: Add sound card
arm64: dts: qcom: lemans: Add gpr node
arm64: dts: qcom: x1e78100-t14s-oled: Add eDP panel
arm64: dts: qcom: qcs615-ride: enable venus node to initialize video codec
arm64: dts: qcom: sm6150: add venus node to devicetree
arm64: dts: qcom: x1e80100-romulus: Add WCN7850 Wi-Fi/BT
arm64: dts: qcom: qrb2210-rb1: Enable Venus
arm64: dts: qcom: qcm2290: Add Venus video node
arm64: dts: qcom: monaco-evk: Add sound card
arm64: dts: qcom: qcs8300: Add gpr node
arm64: dts: qcom: qcs8300: Add Monaco EVK board
dt-bindings: arm: qcom: Add Monaco EVK support
arm64: dts: qcom: qcm6490-idp: Add sound card
arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370 headset codec
arm64: dts: qcom: qcs6490-rb3gen2: Add sound card
...
Merge tag 'lpc32xx-dt-for-6.18' of https://github.com/vzapolskiy/linux-lpc32xx into soc/dt
ARM: nxp: lpc: device tree updates for v6.18
This pull request contains device tree changes for ARM NXP LPC32xx and
ARM NXP LPC18xx/LPC43xx for v6.18, please pull the following:
- Frank fixes a multitude of device tree checker warnings reported for
NXP LPC18xx/LPC43xx powered boards,
- Vladimir fixes a number of compile time warnings issued by a dt checker
for NXP LPC32xx powered boards,
- Vladimir replaces Roland as a maintainer of NXP LPC32xx platform
device trees, Roland is inactive for more than 10 years.
* tag 'lpc32xx-dt-for-6.18' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: dts: lpc32xx: Correct PL080 DMA controller device node name
ARM: dts: lpc32xx: Specify #dma-cells property of PL080 DMA controller
ARM: dts: lpc32xx: Specify a precise version of the SD/MMC controller IP
ARM: dts: lpc32xx: Correct SD/MMC controller device node name
ARM: dts: lpc32xx: Correct motor PWM device tree node name
ARM: dts: lpc32xx: Set motor PWM #pwm-cells property value to 3 cells
dt-bindings: arm: nxp: lpc: Assign myself as maintainer of NXP LPC32xx platforms
ARM: dts: lpc18xx: add missed arm,num-irq-priority-bits
ARM: dts: lpc18xx: add #address-cell and #szie-cell for spi flash controller
ARM: dts: lpc4357-myd-lpc4357: change node name mdio0 to mdio
ARM: dts: lpc: change node name 'button[0-9]' to button-[0-9]'
ARM: dts: lpc4357-myd-lpc4357: add power-supply for innolux,at070tn92
ARM: dts: lpc: add cfg surfix in pinctrl child node
ARM: dts: lpc: add #address-cells and #size-cells for sram node
ARM: dts: lpc18xx: swap clock-names bic and cui
ARM: dts: lpc4350-hitex-eval: change node name flash to flash@0
ARM: dts: lpc18xx: rename node name mmcsd to mmc
ARM: dts: lpc18xx: rename node name flash-controller to spi
Merge tag 'arm-soc/for-6.18/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM SoC Device Tree changes for
6.18, please pull the following:
- Taishi-san adds support for the Buffalo WXR-1750DHP using a BCM4708
SoC
* tag 'arm-soc/for-6.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Add support for Buffalo WXR-1750DHP
dt-bindings: arm: bcm: Add support for Buffalo WXR-1750DHP
Merge tag 'arm-soc/for-6.18/devicetree-arm64' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.18, please pull the following:
- Krzysztof fixes a DTC warning for the ARM GIC in bcm2712.dtsi
- Ivan adds the pin controller node(s), an additional GPIO controller,
the second SDHCI controller node for SDIO Wi-Fi, and the UARTA for
Bluetooth to the BCM2712 DTS (Raspberry Pi 5)
- Stanimir adds the Ethernet DT node and enables it for the RP1 sister
chip
- Andrea deletes a number of redundant PCIe DT node enablement, updates
a comment to describe the relationship between bcm2712 and RP1 and
finally enables the USB controllers with RP1
* tag 'arm-soc/for-6.18/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Enable USB devicetree entries for Rpi5
arm64: dts: broadcom: rp1: Add USB nodes
arm64: dts: broadcom: amend the comment about the role of BCM2712 board DTS
arm64: dts: broadcom: delete redundant pcie enablement nodes
arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5
arm64: dts: rp1: Add ethernet DT node
dt-bindings: mmc: Add support for capabilities to Broadcom SDHCI controller
arm64: dts: broadcom: bcm2712: Add UARTA controller node
arm64: dts: broadcom: bcm2712: Add second SDHCI controller node
arm64: dts: broadcom: bcm2712: Add one more GPIO node
arm64: dts: broadcom: bcm2712: Add pin controller nodes
arm64: dts: broadcom: bcm2712: Add default GIC address cells
Merge tag 'samsung-dt-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.18
1. Drop S3C2416 SoC from bindings, because it was removed from kernel
in 2023.
2. Add Ethernet attached via SROM controller (memory bus) on SMDK5250.
This wasn't tested, but code should work just like it is working on
Exynos5410-based boards.
* tag 'samsung-dt-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: smdk5250: add sromc node
ARM: dts: samsung: exynos5250: describe sromc bank memory map
ARM: dts: samsung: exynos5410: use multiple tuples for sromc ranges
dt-bindings: arm: samsung: Drop S3C2416
Merge tag 'samsung-dt64-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.18
1. Exynos850 e850 board: Enable Ethernet.
2. Exynos990: Enable watchdog and USB, add more clock controllers.
3. Exynos2200: Switch to 32-bit address space for blocks, because all
peripherals fit there. Add remaining serial engine (USI) nodes
(serial, I2C).
4. New Artpec ARTPEC-8 SoC with board. That's a design from Samsung,
sharing all basic blocks with other Samsung SoCs (busses, clock
controllers, pin controllers, PCIe, USB) and having media/video
related blocks from Axis.
Only basic support is added here: few clock controllers, pin
controller and UART.
5. Several cleanups.
* tag 'samsung-dt64-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos990: Enable PERIC0 and PERIC1 clock controllers
arm64: dts: axis: Add ARTPEC-8 Grizzly dts support
arm64: dts: exynos: axis: Add initial ARTPEC-8 SoC support
dt-bindings: arm: axis: Add ARTPEC-8 grizzly board
arm64: dts: exynos8895: Minor whitespace cleanup
dt-bindings: arm: Convert Axis board/soc bindings to json-schema
arm64: dts: exynos2200: Add default GIC address cells
arm64: dts: fsd: Add default GIC address cells
arm64: dts: google: gs101: Add default GIC address cells
arm64: dts: exynos5433: Add default GIC address cells
arm64: dts: exynos2200: define all usi nodes
arm64: dts: exynos2200: increase the size of all syscons
arm64: dts: exynos2200: use 32-bit address space for /soc
arm64: dts: exynos2200: fix typo in hsi2c23 bus pins label
arm64: dts: exynos990-r8s: Enable USB
arm64: dts: exynos990-c1s: Enable USB
arm64: dts: exynos990-x1s-common: Enable USB
arm64: dts: exynos990: Add USB nodes
arm64: dts: exynos990: Enable watchdog timer
arm64: dts: exynos: Add Ethernet node for E850-96 board
Merge tag 'socfpga_dts_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.18
- Add and enable gmac for Agilex5
* tag 'socfpga_dts_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: agilex5: enable gmac2 on the Agilex5 dev kit
arm64: dts: Agilex5 Add gmac nodes to DTSI for Agilex5
Merge tag 'v6.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: FriendlyElec NanoPi Zero2, ArmSoM Sige1, Radxa ROCK 2A/2F,
HINLINK H66K / H68K .
Interesting new peripherals: I guess the most interesting one is likely
the NPU on RK3588. The rocket driver has been merged into both the DRM
tree as well as mainline Mesa.
Other stll interesting ones are DW-Displayport on RK3588, DSI on RK3576
(missing soc pwm-support to be useful on most boards), thermal support
and watchdog on RK3576.
The rest peripheral additions on a number of boards (Beelink A1,
Pine{phone,book}, rk3576-evb1-v10, Rock 5*, ...)
* tag 'v6.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX
arm64: dts: rockchip: Enable DisplayPort for rk3588s Cool Pi 4B
arm64: dts: rockchip: Add DP1 for rk3588
arm64: dts: rockchip: Add DP0 for rk3588
arm64: dts: rockchip: Add FriendlyElec NanoPi Zero2
dt-bindings: arm: rockchip: Add FriendlyElec NanoPi Zero2
arm64: dts: rockchip: Add ArmSoM Sige1
dt-bindings: arm: rockchip: Add ArmSoM Sige1
arm64: dts: rockchip: Add Radxa ROCK 2A/2F
dt-bindings: arm: rockchip: Add Radxa ROCK 2A/2F
dt-bindings: soc: rockchip: add missing clock reference for rk3576-dcphy syscon
arm64: dts: rockchip: add USB3 on Beelink A1
arm64: dts: rockchip: add SPDIF audio to Beelink A1
arm64: dts: rockchip: add IR receiver to rk3328-roc
arm64: dts: rockchip: Further describe the WiFi for the Pinephone Pro
arm64: dts: rockchip: Further describe the WiFi for the Pinebook Pro
arm64: dts: rockchip: Enable the NPU on NanoPi R6C/R6S
arm64: dts: rockchip: enable NPU on OPI5/5B
arm64: dts: rockchip: Add Bluetooth on rk3576-evb1-v10
arm64: dts: rockchip: Add WiFi on rk3576-evb1-v10
...
Merge tag 'thead-dt-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt
T-HEAD Devicetrees for v6.18
Add a device tree node for the IMG BXM-4-64 GPU present in the T-HEAD
TH1520 SoC used by the Lichee Pi 4A board. This node enables support for
the GPU using the drm/imagination driver.
By adding this node, the kernel can recognize and initialize the GPU,
providing graphics acceleration capabilities on the Lichee Pi 4A and
other boards based on the TH1520 SoC. The display controller and HDMI
output are still a work in progress.
Also included is a MAINTAINERS patch that adds an entry for the T-Head
SoC patchwork.
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J2
Add an overlay to connect an IMX462 camera sensor to the J2 connector.
The IMX462 utilizes 4 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI41 Rx to be enabled to process images from the
sensor.
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX462 on J1
Add an overlay to connect an IMX462 camera sensor to the J1 connector.
The IMX462 utilizes 4 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI40 Rx to be enabled to process images from the
sensor.
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J2
Add an overlay to connect an IMX219 camera sensor to the J2 connector.
The IMX219 utilizes 2 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI41 Rx to be enabled to process images from the
sensor.
arm64: dts: renesas: sparrow-hawk: Add overlay for IMX219 on J1
Add an overlay to connect an IMX219 camera sensor to the J1 connector.
The IMX219 utilizes 2 CSI-2 D-PHY lanes. This enables the video capture
pipeline behind the CSI40 Rx to be enabled to process images from the
sensor.
Marek Vasut [Thu, 4 Sep 2025 21:01:18 +0000 (23:01 +0200)]
arm64: dts: renesas: rcar: Rename dsi-encoder to dsi
Rename "dsi-encoder" nodes to "dsi" to follow node name pattern in
Documentation/devicetree/bindings/display/dsi-controller.yaml.
No functional change.
Biju Das [Sun, 17 Aug 2025 14:51:30 +0000 (15:51 +0100)]
arm64: dts: renesas: r9a09g047e57-smarc: Fix gpio key's pin control node
Adding pin control node to the child won't parse the pins during driver
bind. Fix the issue by moving it to parent node.
This issue is observed while adding Schmitt input enable for PS0 pin on
later patch. Currently the reset value of the PIN is set to NMI function
and hence there is no breakage.
John Madieu [Thu, 14 Aug 2025 15:34:55 +0000 (17:34 +0200)]
arm64: dts: renesas: r9a09g047: Enable Tx coe support
The GBETH IPs found on RZ/G3E SoC family are compatible with the stmmac
driver. They have a MAC HW feature register used by this driver to
enable respective features. While the register advertises Tx coe
support, it was not enabled by the driver due to the
'snps,force_thresh_dma_mode' dtsi property.
Switch from 'snps,force_thresh_dma_mode' to 'snps,force_sf_dma_mode' to
enable Tx checksum offload support on both GBETH IPs. While at it, also
switch from 'snps,fixed-burst' to 'snps,mixed-burst' and remove
'snps,no-pbl-x8' for optimal DMA configuration. This improvement
results in a measurable TCP Tx performance gain, increasing throughput
by 20Mbps.
Add missing address-cells 0 to the ICU interrupt node to silence W=1
warning:
armada-cp11x.dtsi:547.3-47: Warning (interrupt_map): /cp0-bus/pcie@f2600000:interrupt-map:
Missing property '#address-cells' in node /cp0-bus/bus@f2000000/interrupt-controller@1e0000/interrupt-controller@10, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add missing address-cells 0 to the PCI interrupt node to silence W=1
warning:
armada-37xx.dtsi:518.4-521.29: Warning (interrupt_map): /soc/pcie@d0070000:interrupt-map:
Missing property '#address-cells' in node /soc/pcie@d0070000/interrupt-controller, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
ARM: tegra: add support for ASUS Eee Pad Slider SL101
Factor out common part from ASUS Eee Pad Transformer TF101 device tree
into tegra20-asus-transformer-common.dtsi and add device tree fragment for
ASUS Eee Pad Slider SL101.
Tested-by: Winona Schroeer-Smith <wolfizen@wolfizen.net> # ASUS SL101 Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Svyatoslav Ryhel [Fri, 29 Aug 2025 12:22:31 +0000 (15:22 +0300)]
dt-bindings: reset: Add Tegra114 CAR header
The way that resets are handled on these Tegra devices is that there is a
set of peripheral clocks & resets which are paired up. This is because they
are laid out in banks within the CAR (clock and reset) controller. In most
cases we're referring to those resets, so you'll often see a clock ID used
in conjection with the same reset ID for a given IP block.
In addition to those peripheral resets, there are a number of extra resets
that don't have a corresponding clock and which are exposed in registers
outside of the peripheral banks, but still part of the CAR. To support
those "special" registers, the TEGRA*_RESET() is used to denote resets
outside of the regular peripheral resets. Essentially it defines the offset
within the CAR at which special resets start. In the above case, Tegra114
has 5 banks with 32 peripheral resets each. The first special reset,
TEGRA114_RESET(0), therefore gets ID 5 * 32 + 0 = 160.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
Tegra30 has CSI pad clock enable bits embedded into PLLD/PLLD2 registers.
Add ids for these clocks. Additionally, move TEGRA30_CLK_CLK_MAX into
clk-tegra30 source.
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
The avdd-dsi-csi-supply is CSI power supply, it has nothing to do with
VI, like same supply is used with DSI and has nothing to do with DC.
Move it to correct place.
Tegra264 has 17 generic I2C controllers, two of which are in always-on
partition of the SoC. In addition to the features supported by Tegra194
it also supports a SW mutex register to allow sharing the same I2C
instance across multiple firmware.
Document compatible string "nvidia,tegra264-i2c" for Tegra264 I2C.
Alexander Stein [Mon, 1 Sep 2025 10:04:29 +0000 (12:04 +0200)]
dt-bindings: arm: fsl: add TQMa91xx SOM series
TQMa91xx series is using NXP i.MX91 CPU on an LGA or socketable type board.
MBa91xxCA is a starterkit base board for TQMa91xx on an adapter board.
Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Wed, 27 Aug 2025 21:24:45 +0000 (17:24 -0400)]
dt-bindings: fsl: fsl,imx7ulp-smc1: Allow clocks and clock-names
Allow clocks and clock-names to match existed dts file.
'hsrun_divcore' should be 'hsrun-divcore'. But use '_' to keep old dts back
compatible.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx7ulp-com.dtb: clock-controller@40410000 (fsl,imx7ulp-smc1): '#clock-cells', 'clock-names', 'clocks' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Josua Mayer [Sat, 23 Aug 2025 14:28:21 +0000 (17:28 +0300)]
dt-bindings: arm: fsl: Add bindings for SolidRun i.MX8MP SoM and boards
Add bindings for SolidRun i.MX8M Plus System on Module based boards:
- CuBox-M is a complete produc with enclosure including the SoM
- HummingBoard Mate/Pro/Pulse/Ripple are evaluation boards with common
design but different available interfaces.
Ray Chang [Fri, 22 Aug 2025 07:33:08 +0000 (15:33 +0800)]
dt-bindings: arm: fsl: Add EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board
Add support for TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board.
Signed-off-by: Ray Chang <ray.chang@technexion.com> Signed-off-by: Richard Hu <richard.hu@technexion.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ARM: dts: lpc32xx: Set motor PWM #pwm-cells property value to 3 cells
Since commit 4cd2f417a0ac ("dt-bindings: pwm: Convert lpc32xx-pwm.txt
to yaml format") both types of PWM controlles on NXP LPC32xx SoC
fairly gained 3 cells, reflect it in the platform dtsi file.
dt-bindings: arm: nxp: lpc: Assign myself as maintainer of NXP LPC32xx platforms
Make a formal change to reflect the actual NXP LPC32xx maintainership
for the last years.
Cc: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Add missed arm,num-irq-priority-bits to fix below CHECK_DTBS warning:
arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: interrupt-controller@e000e100 (arm,armv7m-nvic): 'arm,num-irq-priority-bits' is a required property
from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:47:06 +0000 (14:47 -0400)]
ARM: dts: lpc18xx: add #address-cell and #szie-cell for spi flash controller
Add #address-cells and #szie-cells for spi flash controller to fix below
CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi:103.23-112.5: Warning (spi_bus_bridge): /soc/spi@40003000: incorrect #address-cells for SPI bus
also defined at arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts:452.8-479.3
arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi:103.23-112.5: Warning (spi_bus_bridge): /soc/spi@40003000: incorrect #size-cells for SPI bus
also defined at arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts:452.8-479.3
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:47:05 +0000 (14:47 -0400)]
ARM: dts: lpc4357-myd-lpc4357: change node name mdio0 to mdio
Change node name mdio0 to mdio to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dtb: ethernet@40010000 (nxp,lpc1850-dwmac): Unevaluated properties are not allowed ('mdio0' was unexpected)
from schema $id: http://devicetree.org/schemas/net/nxp,lpc1850-dwmac.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:47:04 +0000 (14:47 -0400)]
ARM: dts: lpc: change node name 'button[0-9]' to button-[0-9]'
Change node name 'button[0-9]' to button-[0-9]' to fix below CHECK_DTB
warning:
arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: pca_buttons (gpio-keys-polled): 'button0', ... do not match any of the regexes: '^(button|...', 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:47:03 +0000 (14:47 -0400)]
ARM: dts: lpc4357-myd-lpc4357: add power-supply for innolux,at070tn92
Add power-supply for innolux,at070tn92 to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dtb: panel (innolux,at070tn92): 'power-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:47:02 +0000 (14:47 -0400)]
ARM: dts: lpc: add cfg surfix in pinctrl child node
Add cfg surfix in pinctrl child node to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: pinctrl@40086000 (nxp,lpc1850-scu): ssp-pins: 'ssp1_cs', 'ssp1_miso_mosi', 'ssp1_sck' do not match any of the regexes: '^pinctrl-[0-9]+$', '_cfg$'
from schema $id: http://devicetree.org/schemas/pinctrl/nxp,lpc1850-scu.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:47:01 +0000 (14:47 -0400)]
ARM: dts: lpc: add #address-cells and #size-cells for sram node
Add #address-cells and #size-cells for sram node to fix below DTB_CHECK
warnings:
arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: sram@2,0 (mmio-sram): '#address-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:46:59 +0000 (14:46 -0400)]
ARM: dts: lpc4350-hitex-eval: change node name flash to flash@0
Change node name 'flash' to 'flash@0' to fix below CHECK_DTB warnings.
arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dtb: flash-controller@40003000 (nxp,lpc1773-spifi): Unevaluated properties are not allowed ('flash' was unexpected)
from schema $id: http://devicetree.org/schemas/mtd/nxp,lpc1773-spifi.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:46:58 +0000 (14:46 -0400)]
ARM: dts: lpc18xx: rename node name mmcsd to mmc
Change node name mmcsd to mmc to fix CHECK_DTB warnings:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: mmcsd@40004000 (snps,dw-mshc): $nodename:0: 'mmcsd@40004000' does not match '^mmc(@.*)?$'
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Frank Li [Sun, 6 Jul 2025 18:46:57 +0000 (14:46 -0400)]
ARM: dts: lpc18xx: rename node name flash-controller to spi
Anyway it is SPI controller although intent to connect qspi flash.
Rename node name flash-controller to spi to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: flash-controller@40003000 (nxp,lpc1773-spifi): $nodename:0: 'flash-controller@40003000' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Michal Simek [Tue, 2 Sep 2025 07:56:20 +0000 (09:56 +0200)]
arm64: zynqmp: Describe ethernet controllers via aliases on SOM
Add ethernet aliases to CC (Carrier card) description to create a
connection which is used by U-BOOT (fdt_fixup_ethernet()) for updating
local-mac-address in DT.
On Kria SOM MAC address is read from i2c eeprom at start and based on it
environment variables are created. Without creating aliases U-Boot is not
able to inject local-mac-address DT property and OS won't get the same MAC
address unless another i2c read is happening in OS.
Also aliases are using string not phandle (because of dtso) that's why full
path has to be provided but that shouldn't be a big issue because location
of ethernet controller is fixed.
arm64: zynqmp: Revert usb node drive strength and slew rate for zcu106
On a few zcu106 boards USB devices (Dell MS116 USB Optical Mouse, Dell USB
Entry Keyboard) are not enumerated on linux boot due to commit
'b8745e7eb488 ("arm64: zynqmp: Fix usb node drive strength and slew
rate")'.
To fix it as a workaround revert to working version and then investigate
at board level why drive strength from 12mA to 4mA and slew from fast to
slow is not working.
Add device tree bindings support for the Grinn GenioSBC-510, a
single-board computer based on the MediaTek Genio 510 SoC.
More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-510
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc
Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250908130620.2309399-5-mateusz.koza@grinn-global.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add device tree bindings support for the Grinn GenioSBC-700, a
single-board computer based on the MediaTek Genio 700 SoC.
More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-700
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc
Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250908130620.2309399-3-mateusz.koza@grinn-global.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Alexander Stein [Fri, 18 Jul 2025 09:47:22 +0000 (17:47 +0800)]
dt-bindings: firmware: imx95-scmi: Allow linux,code for protocol@81
BBM protocol supports a single power button, supported by driver
imx-sm-bbm-key.c. By default this is KEY_POWER, but can also be overwritten
using linux,code. Add a reference to this schema and add linux,code as a
supported property.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
projects / thirdparty / kernel / linux.git / log
