At present, bpf memory allocator uses check_obj_size() to ensure that
ksize() of allocated pointer is equal with the unit_size of used
bpf_mem_cache. Its purpose is to prevent bpf_mem_free() from selecting
a bpf_mem_cache which has different unit_size compared with the
bpf_mem_cache used for allocation. But as reported by lkp, the return
value of ksize() or kmalloc_size_roundup() may change due to slab merge
and it will lead to the warning report in check_obj_size().
The reported warning happened as follows:
(1) in bpf_mem_cache_adjust_size(), kmalloc_size_roundup(96) returns the
object_size of kmalloc-96 instead of kmalloc-cg-96. The object_size of
kmalloc-96 is 96, so size_index for 96 is not adjusted accordingly.
(2) the object_size of kmalloc-cg-96 is adjust from 96 to 128 due to
slab merge in __kmem_cache_alias(). For SLAB, SLAB_HWCACHE_ALIGN is
enabled by default for kmalloc slab, so align is 64 and size is 128 for
kmalloc-cg-96. SLUB has a similar merge logic, but its object_size will
not be changed, because its align is 8 under x86-64.
(3) when unit_alloc() does kmalloc_node(96, __GFP_ACCOUNT, node),
ksize() returns 128 instead of 96 for the returned pointer.
(4) the warning in check_obj_size() is triggered.
Considering the slab merge can happen in anytime (e.g, a slab created in
a new module), the following case is also possible: during the
initialization of bpf_global_ma, there is no slab merge and ksize() for
a 96-bytes object returns 96. But after that a new slab created by a
kernel module is merged to kmalloc-cg-96 and the object_size of
kmalloc-cg-96 is adjust from 96 to 128 (which is possible for x86-64 +
CONFIG_SLAB, because its alignment requirement is 64 for 96-bytes slab).
So soon or later, when bpf_global_ma frees a 96-byte-sized pointer
which is allocated from bpf_mem_cache with unit_size=96, bpf_mem_free()
will free the pointer through a bpf_mem_cache in which unit_size is 128,
because the return value of ksize() changes. The warning for the
mismatch will be triggered again.
A feasible fix is introducing similar APIs compared with ksize() and
kmalloc_size_roundup() to return the actually-allocated size instead of
size which may change due to slab merge, but it will introduce
unnecessary dependency on the implementation details of mm subsystem.
As for now the pointer of bpf_mem_cache is saved in the 8-bytes area
(or 4-bytes under 32-bit host) above the returned pointer, using
unit_size in the saved bpf_mem_cache to select the target cache instead
of inferring the size from the pointer itself. Beside no extra
dependency on mm subsystem, the performance for bpf_mem_free_rcu() is
also improved as shown below.
Before applying the patch, the performances of bpf_mem_alloc() and
bpf_mem_free_rcu() on 8-CPUs VM with one producer are as follows:
After the fixes, there is no need to adjust size_index to fix the
mismatch between allocation and free, so remove it as well. Also return
NULL instead of ZERO_SIZE_PTR for zero-sized alloc in bpf_mem_alloc(),
because there is no bpf_mem_cache pointer saved above ZERO_SIZE_PTR.
Fixes: 9077fc228f09 ("bpf: Use kmalloc_size_roundup() to adjust size_index") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/bpf/202310302113.9f8fe705-oliver.sang@intel.com Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20231216131052.27621-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The idle state entry/exit/residency times differ from what shipped on
production devices, mostly being overly optimistic in entry times and
overly pessimistic in minimal residency times. Align them with
downstream sources.
'first_minor' represents the starting minor number of disks, and
'minors' represents the number of partitions in the device. Neither
of them can be greater than MINORMASK + 1.
Commit e338924bd05d ("block: check minor range in device_add_disk()")
only added the check of 'first_minor + minors'. However, their sum might
be less than MINORMASK but their values are wrong. Complete the checks now.
Fixes: e338924bd05d ("block: check minor range in device_add_disk()") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231219075942.840255-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SM8150-HDK uses two different regulators to power up SuperSpeed USB
PHYs. The L5A regulator is used for the second USB host, while the first
(OTG) USB host uses different regulator, L18A. Fix the regulator for the
usb_1 QMPPHY and (to remove possible confusion) drop the
usb_ss_dp_core_1/_2 labels.
Add required-opps property to the display clock controller. This makes
it cast minimal vote on the MMCX lane and prevents further 'clock stuck'
errors when enabling the display.
Add a node for MPM and wire it up on consumers that use it. This also
fixes a very bad and sad assumption I made when initially porting this
SoC that the downstream MPM-TLMM mappings were 1-1. That apparently
changed some time ago, so with this patch the MPM consumers will actually
be hooked up to the correct interrupt lines.
Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231215-topic-mpm_dt-v1-1-c6636fc75ce3@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375") Cc: stable@vger.kernel.org # 6.2 Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-10-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: d3246a0cf43f ("arm64: dts: qcom: sm6375: Hook up MPM") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can
write to llcc") add the support for chipset where capacity based
allocation and retention through power collapse can be programmed
based on content of SCT table mentioned in the llcc driver where
the target like sdm845 where the entire programming related to it
is controlled in firmware. However, the commit introduces a bug
where capacity/retention register get overwritten each time it
gets programmed for each slice and that results in misconfiguration
of the register based on SCT table and that is not expected
behaviour instead it should be read modify write to retain the
configuration of other slices.
This issue is totally caught from code review and programming test
and not through any power/perf numbers so, it is not known what
impact this could make if we don't have this change however,
this feature are for these targets and they should have been
programmed accordingly as per their configuration mentioned in
SCT table like others bits information.
This change brings one difference where it keeps capacity/retention
bits of the slices that are not mentioned in SCT table in unknown
state where as earlier it was initialized to zero.
Fixes: c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write to llcc") Signed-off-by: Atul Dhudase <quic_adhudase@quicinc.com> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1701876771-10695-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When initially added, a mistake was made in the definition of the codec.
Despite the fact that the DMIC line is connected on the side of the
codec chip, and relevant passive components, including 0-ohm resistors
connecting the dmics, are present, the dmic line is still cut in
another place on the board, which was overlooked.
Correct this by replacing the dmic configuration with a comment
describing this hardware detail.
While at it, also add missing regulators definitions. This is not a
functional change as all the relevant regulators were already added via
the other rail supplies.
An abnormally big cnt may also be assigned to kprobe_multi.cnt when
attaching multiple kprobes. It will trigger the following warning in
kvmalloc_node():
Fix the warning by limiting the maximal number of kprobes in
bpf_kprobe_multi_link_attach(). If the number of kprobes is greater than
MAX_KPROBE_MULTI_CNT, the attachment will fail and return -E2BIG.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link") Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231215100708.2265609-3-houtao@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the warning by limiting the maximal number of uprobes in
bpf_uprobe_multi_link_attach(). If the number of uprobes is greater than
MAX_UPROBE_MULTI_CNT, the attachment will return -E2BIG.
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link") Reported-by: Xingwei Lee <xrivendell7@gmail.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Closes: https://lore.kernel.org/bpf/CABOYnLwwJY=yFAGie59LFsUsBAgHfroVqbzZ5edAXbFE3YiNVA@mail.gmail.com Link: https://lore.kernel.org/bpf/20231215100708.2265609-2-houtao@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Reproduced with below sequence:
dma_declare_coherent_memory()->dma_release_coherent_memory()
->dma_declare_coherent_memory()->"return -EBUSY" error
It will return -EBUSY from the dma_assign_coherent_memory()
in dma_declare_coherent_memory(), the reason is that dev->dma_mem
pointer has not been set to NULL after it's freed.
Fixes: cf65a0f6f6ff ("dma-mapping: move all DMA mapping code to kernel/dma") Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Send credit update message when SO_RCVLOWAT is updated and it is bigger
than number of bytes in rx queue. It is needed, because 'poll()' will
wait until number of bytes in rx queue will be not smaller than
O_RCVLOWAT, so kick sender to send more data. Otherwise mutual hungup
for tx/rx is possible: sender waits for free space and receiver is
waiting data in 'poll()'.
Rename 'set_rcvlowat' callback to 'notify_set_rcvlowat' and set
'sk->sk_rcvlowat' only in one place (i.e. 'vsock_set_rcvlowat'), so the
transport doesn't need to do it.
Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add one more condition for sending credit update during dequeue from
stream socket: when number of bytes in the rx queue is smaller than
SO_RCVLOWAT value of the socket. This is actual for non-default value
of SO_RCVLOWAT (e.g. not 1) - idea is to "kick" peer to continue data
transmission, because we need at least SO_RCVLOWAT bytes in our rx
queue to wake up user for reading data (in corner case it is also
possible to stuck both tx and rx sides, this is why 'Fixes' is used).
Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages") Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to support IP_PKTINFO on those packets, we need to call
ipv4_pktinfo_prepare.
When sending mrouted/pimd daemons a cache report IGMP msg, it is
unnecessary to set dst on the newly created skb.
It used to be necessary on older versions until
commit d826eb14ecef ("ipv4: PKTINFO doesnt need dst reference") which
changed the way IP_PKTINFO struct is been retrieved.
Changes from v1:
1. Undo changes in ipv4_pktinfo_prepare function. use it directly
and copy the control block.
Fixes: d826eb14ecef ("ipv4: PKTINFO doesnt need dst reference") Signed-off-by: Leone Fernando <leone4fernando@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Route get
2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium
Searching for:
2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300
The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will
not put RTA_SRC info. After fix:
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
So the problem is at rec->refcount_off in the above.
I did some source code analysis and find the reason.
CPU A CPU B
bpf_map_put:
...
btf_put with rcu callback
...
bpf_map_free_deferred
with system_unbound_wq
... ... ...
... btf_free_rcu: ...
... ... bpf_map_free_deferred:
... ...
... ---------> btf_struct_metas_free()
... | race condition ...
... ---------> map->ops->map_free()
...
... btf->struct_meta_tab = NULL
In the above, map_free() corresponds to array_map_free() and eventually
calling bpf_rb_root_free() which calls:
...
__bpf_obj_drop_impl(obj, field->graph_root.value_rec, false);
...
Here, 'value_rec' is assigned in btf_check_and_fixup_fields() with following code:
meta = btf_find_struct_meta(btf, btf_id);
if (!meta)
return -EFAULT;
rec->fields[i].graph_root.value_rec = meta->record;
So basically, 'value_rec' is a pointer to the record in struct_metas_tab.
And it is possible that that particular record has been freed by
btf_struct_metas_free() and hence we have a kasan error here.
Actually it is very hard to reproduce the failure with current bpf/bpf-next
code, I only got the above error once. To increase reproducibility, I added
a delay in bpf_map_free_deferred() to delay map->ops->map_free(), which
significantly increased reproducibility.
Hao also provided test cases ([1]) for easily reproducing the above issue.
There are two ways to fix the issue, the v1 of the patch ([2]) moving
btf_put() after map_free callback, and the v5 of the patch ([3]) using
a kptr style fix which tries to get a btf reference during
map_check_btf(). Each approach has its pro and cons. The first approach
delays freeing btf while the second approach needs to acquire reference
depending on context which makes logic not very elegant and may
complicate things with future new data structures. Alexei
suggested in [4] going back to v1 which is what this patch
tries to do.
Rerun './test_progs -j' with the above mdelay() hack for a couple
of times and didn't observe the error for the above rb_root test cases.
Running Hou's test ([1]) is also successful.
The binding erroneously decreed that the SCMI variants of the ST
evaluation kits are compatible with the non-SCMI variants.
This is not correct, as a kernel or bootloader compatible with the non-SCMI
variant is not necessarily able to function, when direct access
to resources is replaced by having to talk SCMI to the secure monitor.
The binding has been adjusted to reflect thus, so synchronize the device
trees now.
Fixes: 5b7e58313a77 ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)") Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix test broken by shared umem test and framework enhancement commit.
Correct the current implementation of pkt_stream_replace_half() by
ensuring that nb_valid_entries are not set to half, as this is not true
for all the tests. Ensure that the expected value for valid_entries for
the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent,
which is 4096.
Create a new function called pkt_stream_pkt_set() that allows for packet
modification to meet specific requirements while ensuring the accurate
maintenance of the valid packet count to prevent inconsistencies in packet
tracking.
Fixes: 6d198a89c004 ("selftests/xsk: Add a test for shared umem feature") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20231214130007.33281-1-tushar.vyavahare@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In function debugfs_debugfs_snapshot_global_reg_v3_hw() it uses
debugfs_axi_reg.count (which is the number of axi debugfs registers) to
acquire the number of global debugfs registers.
Use debugfs_global_reg.count to acquire the number of global debugfs
registers instead.
Fixes: 623a4b6d5c2a ("scsi: hisi_sas: Move debugfs code to v3 hw driver") Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1702525516-51258-6-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We obtain the semaphore and set HISI_SAS_RESETTING_BIT in
hisi_sas_reset_prepare_v3_hw(), block the scsi host and set
HISI_SAS_REJECT_CMD_BIT in hisi_sas_controller_reset_prepare(), released
them in hisi_sas_controller_reset_done(). However, if the HW reset failure
in FLR results in early return, the semaphore and flag bits will not be
release.
Rollback some operations including clearing flags / releasing semaphore
when FLR is failed.
Fixes: e5ea48014adc ("scsi: hisi_sas: Implement handlers of PCIe FLR for v3 hw") Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1702525516-51258-5-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In commit 4b329abc9180 ("scsi: hisi_sas: Move slot variable definition in
hisi_sas_abort_task()"), we move the variables slot to the function head.
However, the variable slot may be NULL, we should check it in each branch.
Fixes: 4b329abc9180 ("scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()") Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1702525516-51258-4-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In function hisi_sas_controller_prereset(), -ENOSYS (Function not
implemented) should be returned if the driver does not support .soft_reset.
Returns -EPERM (Operation not permitted) if HISI_SAS_RESETTING_BIT is
already be set.
In function _suspend_v3_hw(), returns -EPERM (Operation not permitted) if
HISI_SAS_RESETTING_BIT is already be set.
Fixes: 4522204ab218 ("scsi: hisi_sas: tidy host controller reset function a bit") Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1702525516-51258-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the function returns -EINVAL if algorithm other than AES-256-XTS
is requested. But the correct error code is -EOPNOTSUPP. Fix it!
Cc: Abel Vesa <abel.vesa@linaro.org> Fixes: 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API") Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231208065902.11006-3-manivannan.sadhasivam@linaro.org Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the GPU nodes were added, the GPU_PLL_OUT was configured
for 1000MHz, but this requires the SoC to run in overdrive mode
which requires an elevated voltage operating point.
Since this may run some boards out of spec, the default clock
should be set to 800MHz for nominal operating mode. Boards
that run at the higher voltage can update their clocks
accordingly.
Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
DT overlays in tree need to be applied to a base DTB to validate they
apply, to run schema checks on them, and to catch any errors at compile
time. Defining the "-dtbs" variable is not enough as the combined DT must
be added to dtbs-y.
zynqmp-sck-kr-g-revA.dtso and zynqmp-sck-kr-g-revB.dtso don't exist, so drop
them.
Signed-off-by: Rob Herring <robh@kernel.org> Fixes: 45fe0dc4ea2e ("arm64: xilinx: Use zynqmp prefix for SOM dt overlays") Link: https://lore.kernel.org/r/20230911214751.2202913-1-robh@kernel.org Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On the error path of device_add_disk(), device's memalloc_noio flag was
set but not cleared. As the comment of pm_runtime_set_memalloc_noio(),
"The function should be called between device_add() and device_del()".
Clear this flag before device_del() now.
Fixes: 25e823c8c37d ("block/genhd.c: apply pm_runtime_set_memalloc_noio on block devices") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231211075356.1839282-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
EHT CQI is one of the EHT PHY capabilities. We don't support EHT CQI.
The non-triggered CQI feedback bit was unset in a previous patch,
but the triggered CQI feedback bit wasn't. Unset it.
To avoid using incorrect 6g power settings after disconnection,
it should to update back to the default state when disconnected.
Fixes: 51ba0e3a15eb ("wifi: mt76: mt7921: add 6GHz power type support for clc") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
When enter suspend/resume while in a connected state, the upper layer
will trigger disconnection before entering suspend, and at the same time,
it will trigger regd_notifier() and update CLC, causing the CLC event to
not be received due to suspend, resulting in a command timeout.
Therefore, the update of CLC is postponed until resume, to ensure data
consistency and avoid the occurrence of command timeout.
Fixes: 4fc8df50fd41 ("wifi: mt76: mt7921: get regulatory information from the clc event") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to the increase in the number of power tables for 6Ghz on CLC,
the variable nr_country is no longer sufficient to represent the
total quantity. Therefore, we have switched to calculating the
length of clc buf to obtain the correct power table. Additionally,
the version number has been incremented to 1.
Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
DMA-related nodes have their own standardized naming. Therefore,
the MT8195 VDOSYS RDMA has been unified and corrected.
Additionally, these modifications will facilitate the further
integration of bindings.
Fixes: 92d2c23dc269 ("arm64: dts: mt8195: add display node for vdosys1") Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DMA-related nodes RDMA/WROT in MDP3 should be changed to generic names.
In addition, fix improper space indent in example.
Fixes: 4ad7b39623ab ("media: dt-binding: mediatek: add bindings for MediaTek MDP3 components") Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, there are two test cases with same name
"ALU64_SMOD_X: -7 % 2 = -1", the first one is right,
the second one should be ALU64_SMOD_K because its
code is BPF_ALU64 | BPF_MOD | BPF_K.
Privileged programs are supposed to be able to read uninitialized stack
memory (ever since 6715df8d5) but, before this patch, these accesses
were permitted inconsistently. In particular, accesses were permitted
above state->allocated_stack, but not below it. In other words, if the
stack was already "large enough", the access was permitted, but
otherwise the access was rejected instead of being allowed to "grow the
stack". This undesired rejection was happening in two places:
- in check_stack_slot_within_bounds()
- in check_stack_range_initialized()
This patch arranges for these accesses to be permitted. A bunch of tests
that were relying on the old rejection had to change; all of them were
changed to add also run unprivileged, in which case the old behavior
persists. One tests couldn't be updated - global_func16 - because it
can't run unprivileged for other reasons.
This patch also fixes the tracking of the stack size for variable-offset
reads. This second fix is bundled in the same commit as the first one
because they're inter-related. Before this patch, writes to the stack
using registers containing a variable offset (as opposed to registers
with fixed, known values) were not properly contributing to the
function's needed stack size. As a result, it was possible for a program
to verify, but then to attempt to read out-of-bounds data at runtime
because a too small stack had been allocated for it.
Each function tracks the size of the stack it needs in
bpf_subprog_info.stack_depth, which is maintained by
update_stack_depth(). For regular memory accesses, check_mem_access()
was calling update_state_depth() but it was passing in only the fixed
part of the offset register, ignoring the variable offset. This was
incorrect; the minimum possible value of that register should be used
instead.
This tracking is now fixed by centralizing the tracking of stack size in
grow_stack_state(), and by lifting the calls to grow_stack_state() to
check_stack_access_within_bounds() as suggested by Andrii. The code is
now simpler and more convincingly tracks the correct maximum stack size.
check_stack_range_initialized() can now rely on enough stack having been
allocated for the access; this helps with the fix for the first issue.
A few tests were changed to also check the stack depth computation. The
one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.
This patch promotes the arithmetic around checking stack bounds to be
done in the 64-bit domain, instead of the current 32bit. The arithmetic
implies adding together a 64-bit register with a int offset. The
register was checked to be below 1<<29 when it was variable, but not
when it was fixed. The offset either comes from an instruction (in which
case it is 16 bit), from another register (in which case the caller
checked it to be below 1<<29 [1]), or from the size of an argument to a
kfunc (in which case it can be a u32 [2]). Between the register being
inconsistently checked to be below 1<<29, and the offset being up to an
u32, it appears that we were open to overflowing the `int`s which were
currently used for arithmetic.
This patch fixes a bug around the verification of possibly-zero-sized
stack accesses. When the access was done through a var-offset stack
pointer, check_stack_access_within_bounds was incorrectly computing the
maximum-offset of a zero-sized read to be the same as the register's min
offset. Instead, we have to take in account the register's maximum
possible value. The patch also simplifies how the max offset is checked;
the check is now simpler than for min offset.
The bug was allowing accesses to erroneously pass the
check_stack_access_within_bounds() checks, only to later crash in
check_stack_range_initialized() when all the possibly-affected stack
slots are iterated (this time with a correct max offset).
check_stack_range_initialized() is relying on
check_stack_access_within_bounds() for its accesses to the
stack-tracking vector to be within bounds; in the case of zero-sized
accesses, we were essentially only verifying that the lowest possible
slot was within bounds. We would crash when the max-offset of the stack
pointer was >= 0 (which shouldn't pass verification, and hopefully is
not something anyone's code attempts to do in practice).
The ieee80211_queue_work function queues work into the mac80211
local->workqueue, which is widely used for mac80211 internal
work processes. In the mt76 driver, both the mt76-sido-status and
mt76-sdio-net threads enqueue workers to the workqueue with this
function. However, in some cases, when two workers are enqueued
to the workqueue almost simultaneously, the second worker may not
be scheduled immediately and may get stuck for a while.
This can cause timing issues. To avoid these timing
conflicts caused by worker scheduling, replace the worker
with an independent thread.
Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support") Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
The internal struct and union inside mt7996_mcu_all_sta_info_event is
marked as being aligned, which conflicts with it being unaligned
within that structure:
drivers/net/wireless/mediatek/mt76/mt7996/mcu.h:165:2: error: field within 'struct mt7996_mcu_all_sta_info_event' is less aligned than 'union mt7996_mcu_all_sta_info_event::(anonymous at ../drivers/net/wireless/mediatek/mt76/mt7996/mcu.h:165:2)' and is usually due to 'struct mt7996_mcu_all_sta_info_event' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
Mark all three as being packed as well to ensure byte packing for
the entire thing.
Fixes: adde3eed4a75 ("wifi: mt76: mt7996: Add mcu commands for getting sta tx statistic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Just like MT7916 also MT7981 can handle 3T3R DBDC frontend and should
hence be included in the corresponding conditional expression in the
driver. Add it.
Fixes: 6bad146d162e ("wifi: mt76: mt7915: add support for MT7981") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
The offset of the TSSI flag on the EEPROM of MT7981 devices was wrong.
Set the correct offset instead.
Fixes: 6bad146d162e ("wifi: mt76: mt7915: add support for MT7981") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
For UBPR and FILS frames, the BSS_CHANGED_BEACON flag will also be set,
which causes those frames to use the beacon rate in TX descriptors.
Adjust the statement to fix this issue.
mt76 assumes mt7915_mmio_wed_init can fail just after wed driver has
been attached running mtk_wed_device_attach().
Fall back to non-wed mode if platform_get_resource fails in
mt7915_mmio_wed_init routines.
Fixes: eebb70976be5 ("wifi: mt76: mt7915: enable wed for mt7986-wmac chipset") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix typo in mt76_get_of_eeprom_from_nvmem where eeprom was misspelled as
epprom.
Fixes: 5bef3a406c6e ("wifi: mt76: add support for providing eeprom in nvmem cells") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.
Fixes: 7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes") Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231120164331.8116-12-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.
Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231120164331.8116-6-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.
GPU_SMMU SID 1 is meant for Adreno LPAC (Low Priority Async Compute).
On platforms that support it (in firmware), it is necessary to
describe that link, or Adreno register access will hang the board.
The current settings are functionally identical, *but* due to what is
likely hardcoded security policies, the secure firmware rejects them,
resulting in the board hanging. To avoid that, alter the settings such
that SID 0 and 1 are described separately.
Add interrupts to SM6125 DWC3 USB controller, based on downstream/vendor
code of Trinket DTSI from Xiaomi Laurel device, to fix dtbs_check
warnings:
sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'interrupt-names' is a required property
sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'oneOf' conditional failed, one must be fixed:
'interrupts' is a required property
'interrupts-extended' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20231111164229.63803-5-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The default for the QCM2290 platform that this board is based on is OTG
mode, however the role detection logic is not hooked up for this board
and the dwc3 driver is configured to not allow role switching from
userspace.
Force this board to host mode as this is the preferred usecase until we
get role switching hooked up.
In fnic_init_module() exists redundant check for return value from
fnic_debugfs_init(), because at moment it only can return zero. It make
sense to process theoretical vmalloc() failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9730ddfb123d ("scsi: fnic: remove redundant assignment of variable rc") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Link: https://lore.kernel.org/r/20231128111008.2280507-1-artem.chernyshev@red-soft.ru Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When register is spilled onto a stack as a 1/2/4-byte register, we set
slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it,
depending on actual spill size). So to check if some stack slot has
spilled register we need to consult slot_type[7], not slot_type[0].
To avoid the need to remember and double-check this in the future, just
use is_spilled_reg() helper.
Fixes: 27113c59b6d0 ("bpf: Check the other end of slot_type for STACK_SPILL") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231205184248.1502704-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When do arping, the interface need to be specified. Or we will
get error: Interface "lo" is not ARPable. And the test failed.
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [FAIL]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL]
After fix:
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When updating or deleting an inner map in map array or map htab, the map
may still be accessed by non-sleepable program or sleepable program.
However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map
directly through bpf_map_put(), if the ref-counter is the last one
(which is true for most cases), the inner map will be freed by
ops->map_free() in a kworker. But for now, most .map_free() callbacks
don't use synchronize_rcu() or its variants to wait for the elapse of a
RCU grace period, so after the invocation of ops->map_free completes,
the bpf program which is accessing the inner map may incur
use-after-free problem.
Fix the free of inner map by invoking bpf_map_free_deferred() after both
one RCU grace period and one tasks trace RCU grace period if the inner
map has been removed from the outer map before. The deferment is
accomplished by using call_rcu() or call_rcu_tasks_trace() when
releasing the last ref-counter of bpf map. The newly-added rcu_head
field in bpf_map shares the same storage space with work field to
reduce the size of bpf_map.
map is the pointer of outer map, and need_defer needs some explanation.
need_defer tells the implementation to defer the reference release of
the passed element and ensure that the element is still alive before
the bpf program, which may manipulate it, exits.
The following three cases will invoke map_fd_put_ptr() and different
need_defer values will be passed to these callers:
1) release the reference of the old element in the map during map update
or map deletion. The release must be deferred, otherwise the bpf
program may incur use-after-free problem, so need_defer needs to be
true.
2) release the reference of the to-be-added element in the error path of
map update. The to-be-added element is not visible to any bpf
program, so it is OK to pass false for need_defer parameter.
3) release the references of all elements in the map during map release.
Any bpf program which has access to the map must have been exited and
released, so need_defer=false will be OK.
These two parameters will be used by the following patches to fix the
potential use-after-free problem for map-in-map.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20231106144335.v2.7.I1c8ab71570f6906fd020decb80675f05fbe1fe74@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
Fixes: 09b701b89a76 ("arm64: dts: qcom: sa8775p: add the watchdog node") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20231106144335.v2.6.I909b7c4453d7b7fb0db4b6e49aa21666279d827d@changeid Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
As described in the patch ("arm64: dts: qcom: sc7180: Make watchdog
bark interrupt edge triggered"), the Qualcomm watchdog timer's bark
interrupt should be configured as edge triggered. Make the change.
On sc7180 when the watchdog timer fires your logs get filled with:
watchdog0: pretimeout event
watchdog0: pretimeout event
watchdog0: pretimeout event
...
watchdog0: pretimeout event
If you're using console-ramoops to debug crashes the above gets quite
annoying since it blows away any other log messages that might have
been there.
The issue is that the "bark" interrupt (AKA the "pretimeout"
interrupt) remains high until the watchdog is pet. Since we've got
things configured as "level" triggered we'll keep getting interrupted
over and over.
Let's switch to edge triggered. Now we'll get one interrupt when the
"bark" interrupt goes off and won't get another one until the "bark"
interrupt is cleared and asserts again.
This matches how many older Qualcomm SoCs have things configured.
The TX Soundwire controller should take clock from TX macro codec, not
VA macro codec clock, otherwise the clock stays disabled. This looks
like a copy-paste issue, because the SC8280xp code uses here correctly
clock from TX macro. The VA macro clock is already consumed by TX macro
codec, thus it won't be disabled by this change.
The TX Soundwire controller should take clock from TX macro codec, not
VA macro codec clock, otherwise the clock stays disabled. This looks
like a copy-paste issue, because the SC8280xp code uses here correctly
clock from TX macro. The VA macro clock is already consumed by TX macro
codec, thus it won't be disabled by this change.
Fixes: 14341e76dbc7 ("arm64: dts: qcom: sm8450: add Soundwire and LPASS") Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20231129140537.161720-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hall sensor interrupt on the Primus is active low, which means that
with the current configuration the device attempts to suspend when the
LID is open.
Fix the polarity of the HALL_INT GPIO to avoid this.
This link got broken by commit e790a4ce5290 ("arm: docs: Move Arm
documentation to Documentation/arch/") when the doc moved from arm/ to
arch/arm/. Fix the link so that it can continue to be followed.
Fixes: e790a4ce5290 ("arm: docs: Move Arm documentation to Documentation/arch/") Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20231129030443.2753833-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Given verifier checks actual value, r0 has to be precise, so we need to
propagate precision properly. r0 also has to be marked as read,
otherwise subsequent state comparisons will ignore such register as
unimportant and precision won't really help here.
xdp_synproxy_kern.c is a BPF program that generates SYN cookies on
allowed TCP ports and sends SYNACKs to clients, accelerating synproxy
iptables module.
Fix the bitmask operation when checking the status of an existing
conntrack entry within tcp_lookup() function. Do not AND with the bit
position number, but with the bitmask value to check whether the entry
found has the IPS_CONFIRMED flag set.
Lukas reports skb_over_panic errors on his Banana Pi BPI-CM4 which comes
with an Amlogic A311D (G12B) SoC and a RTL8822CS SDIO wifi/Bluetooth
combo card. The error he observed is identical to what has been fixed
in commit e967229ead0e ("wifi: rtw88: sdio: Check the HISR RX_REQUEST
bit in rtw_sdio_rx_isr()") but that commit didn't fix Lukas' problem.
Lukas found that disabling or limiting RX aggregation works around the
problem for some time (but does not fully fix it). In the following
discussion a few key topics have been discussed which have an impact on
this problem:
- The Amlogic A311D (G12B) SoC has a hardware bug in the SDIO controller
which prevents DMA transfers. Instead all transfers need to go through
the controller SRAM which limits transfers to 1536 bytes
- rtw88 chips don't split incoming (RX) packets, so if a big packet is
received this is forwarded to the host in it's original form
- rtw88 chips can do RX aggregation, meaning more multiple incoming
packets can be pulled by the host from the card with one MMC/SDIO
transfer. This Depends on settings in the REG_RXDMA_AGG_PG_TH
register (BIT_RXDMA_AGG_PG_TH limits the number of packets that will
be aggregated, BIT_DMA_AGG_TO_V1 configures a timeout for aggregation
and BIT_EN_PRE_CALC makes the chip honor the limits more effectively)
Use multiple consecutive reads in rtw_sdio_read_port() and limit the
number of bytes which are copied by the host from the card in one
MMC/SDIO transfer. This allows receiving a buffer that's larger than
the hosts max_req_size (number of bytes which can be transferred in
one MMC/SDIO transfer). As a result of this the skb_over_panic error
is gone as the rtw88 driver is now able to receive more than 1536 bytes
from the card (either because the incoming packet is larger than that
or because multiple packets have been aggregated).
In case of an receive errors (-EILSEQ has been observed by Lukas) we
need to drain the remaining data from the card's buffer, otherwise the
card will return corrupt data for the next rtw_sdio_read_port() call.
Fixes: 65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets") Reported-by: Lukas F. Hartmann <lukas@mntre.com> Closes: https://lore.kernel.org/linux-wireless/CAFBinCBaXtebixKbjkWKW_WXc5k=NdGNaGUjVE8NCPNxOhsb2g@mail.gmail.com/ Suggested-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Lukas F. Hartmann <lukas@mntre.com> Reported-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Lukas F. Hartmann <lukas@mntre.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231120115726.1569323-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
DSS irq trigger type is set to IRQ_TYPE_EDGE_RISING in the DT file, but
the TRM says it is level triggered.
For some reason triggering on rising edge results in double the amount
of expected interrupts, e.g. for normal page flipping test the number of
interrupts per second is 2 * fps. It is as if the IRQ triggers on both
edges. There are no other side effects to this issue than slightly
increased CPU & power consumption due to the extra interrupt.
Switching to IRQ_TYPE_LEVEL_HIGH is correct and fixes the issue, so
let's do that.
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:184:49:
The result of the left shift is undefined due to shifting by '32',
which is greater or equal to the width of type 'u32'.
[core.UndefinedBinaryOperatorResult]
If the value of the right operand is negative or is greater than or
equal to the width of the promoted left operand, the behavior is
undefined.[1][2]
For example, when using different gcc's compilation optimization options
(-O0 or -O2), the result of '(u32)data << 32' is different. One is 0, the
other is old value of data. Let _rtl8821ae_phy_calculate_bit_shift()'s
return value less than 32 to fix this problem. Warn if bitmask is zero.
When the core rfkill config throws error, it should free the
allocated resources. Currently it is not freeing the core pdev
create resources. Avoid this issue by calling the core pdev
destroy in the error handler of core rfkill config.
Found this issue in the code review and it is compile tested only.
Fixes: 004ccbc0dd49 ("wifi: ath12k: add support for hardware rfkill for WCN7850") Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231111040107.18708-1-quic_periyasa@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/scsi/bfa/bfad_bsg.c:2553:50: sparse: sparse: incorrect type in initializer (different base types)
Fixes: 2e5a6c3baccd ("scsi: bfa: Convert bfad_reset_sdev_bflags() from a macro into a function") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311031255.lmSPisIk-lkp@intel.com/ Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20231115193338.2261972-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
