reftable/basics: fix segfault when growing `names` array fails
When growing the `names` array fails we would end up with a `NULL`
pointer. This causes two problems:
- We would run into a segfault because we try to free names that we
have assigned to the array already.
- We lose track of the old array and cannot free its contents.
Fix this issue by using a temporary variable. Like this we do not
clobber the old array that we tried to reallocate, which will remain
valid when a call to realloc(3P) fails.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable library uses pluggable allocators, which means that we
shouldn't ever use the standard allocator functions. But it is an easy
mistake to make to accidentally use e.g. free(3P) instead of the
reftable-specific `reftable_free()` function, and we do not have any
mechanism to detect this misuse right now.
Introduce a couple of macros that ban the standard allocators, similar
to how we do it in "banned.h".
Note that we do not ban the following two classes of functions:
- Macros like `FREE_AND_NULL()` or `REALLOC_ARRAY()`. As those expand
to code that contains already-banned functions we'd get a compiler
error even without banning those macros explicitly.
- Git-specific allocators like `xmalloc()` and friends. The primary
reason is that there are simply too many of them, so we're rather
aiming for best effort here. Furthermore, the eventual goal is to
make them unavailable in the reftable library place by not pulling
them in via "git-compat-utils.h" anymore.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have several calls to `FREE_AND_NULL()` in the reftable library,
which of course uses free(3P). As the reftable allocators are pluggable
we should rather call the reftable specific function, which is
`reftable_free()`.
Introduce a new macro `REFTABLE_FREE_AND_NULL()` and adapt the callsites
accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a small set of calls to free(3P) in the reftable library. As
the reftable allocators are pluggable we should rather call the reftable
specific function, which is `reftable_free()`.
Convert the code accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tree interfaces of the reftable library handle both insertion and
searching of tree nodes with a single function, where the behaviour is
altered between the two via an `insert` bit. This makes it quit awkward
to handle allocation failures because on inserting we'd have to check
for `NULL` pointers and return an error, whereas on searching entries we
don't have to handle it as an allocation error.
Split up concerns of this function into two separate functions, one for
inserting entries and one for searching entries. This makes it easy for
us to check for allocation errors as `tree_insert()` should never return
a `NULL` pointer now. Adapt callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle allocation failures in `block_writer_init()` and
`block_reader_init()`. This requires us to bubble up error codes into
`writer_reinit_block_writer()`. Adapt call sites accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/reader: handle allocation failures in `reader_init_iter()`
Handle allocation failures in `reader_init_iter()`. This requires us to
also adapt `reftable_reader_init_*_iterator()` to bubble up the new
error codes. Adapt callers accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/merged: handle allocation failures in `merged_table_init_iter()`
Handle allocation failures in `merged_table_init_iter()`. While at it,
merge `merged_iter_init()` into the function. It only has a single
caller and merging them makes it easier to handle allocation failures
consistently.
This change also requires us to adapt `reftable_stack_init_*_iterator()`
to bubble up the new error codes of `merged_table_iter_init()`. Adapt
callsites accordingly.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/writer: handle allocation failures in `reftable_new_writer()`
Handle allocation failures in `reftable_new_writer()`. Adapt the
function to return an error code to return such failures. While at it,
rename it to match our code style as we have to touch up every callsite
anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/record: handle allocation failures on copy
Handle allocation failures when copying records. While at it, convert
from `xstrdup()` to `reftable_strdup()`. Adapt callsites to check for
error codes.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/basics: handle allocation failures in `parse_names()`
Handle allocation failures in `parse_names()` by returning `NULL` in
case any allocation fails. While at it, refactor the function to return
the array directly instead of assigning it to an out-pointer.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/basics: handle allocation failures in `reftable_calloc()`
Handle allocation failures in `reftable_calloc()`.
While at it, remove our use of `st_mult()` that would cause us to die on
an overflow. From the caller's point of view there is not much of a
difference between arguments that are too large to be multiplied and a
request that is too big to handle by the allocator: in both cases the
allocation cannot be fulfilled. And in neither of these cases do we want
the reftable library to die.
While we could use `unsigned_mult_overflows()` to handle the overflow
gracefully, we instead open-code it to further our goal of converting
the reftable codebase to become a standalone library that can be reused
by external projects.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable library provides the ability to swap out allocators. There
is a gap here though, because we continue to use `xstrdup()` even in the
case where all the other allocators have been swapped out.
Introduce `reftable_strdup()` that uses `reftable_malloc()` to do the
allocation.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/basics: merge "publicbasics" into "basics"
The split between "basics" and "publicbasics" is somewhat arbitrary and
not in line with how we typically structure code in the reftable
library. While we do indeed split up headers into a public and internal
part, we don't do that for the compilation unit itself. Furthermore, the
declarations for "publicbasics.c" are in "reftable-malloc.h", which
isn't in line with our naming schema, either.
Fix these inconsistencies by:
- Merging "publicbasics.c" into "basics.c".
- Renaming "reftable-malloc.h" to "reftable-basics.h" as the public
header.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reftable library does not use the same memory allocation functions
as the rest of the Git codebase. Instead, as the reftable library is
supposed to be usable as a standalone library without Git, it provides a
set of pluggable memory allocators.
Compared to `xmalloc()` and friends these allocators are _not_ expected
to die when an allocation fails. This design choice is concious, as a
library should leave it to its caller to handle any kind of error. While
it is very likely that the caller cannot really do much in the case of
an out-of-memory situation anyway, we are not the ones to make that
decision.
Curiously though, we never handle allocation errors even though memory
allocation functions are allowed to fail. And as we do not plug in Git's
memory allocator via `reftable_set_alloc()` either the consequence is
that we'd instead segfault as soon as we run out of memory.
While the easy fix would be to wire up `xmalloc()` and friends, it
would only fix the usage of the reftable library in Git itself. Other
users like libgit2, which is about to revive its efforts to land a
backend for reftables, wouldn't be able to benefit from this solution.
Instead, we are about to do it the hard way: adapt all allocation sites
to perform error checking. Introduce a new error code for out-of-memory
errors that we will wire up in subsequent steps.
This commit also serves as the motivator for all the remaining steps in
this series such that we do not have to repeat the same arguments in
every single subsequent commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 16 Sep 2024 21:06:06 +0000 (14:06 -0700)]
Merge branch 'cp/unit-test-reftable-stack' into ps/reftable-alloc-failures
* cp/unit-test-reftable-stack:
t-reftable-stack: add test for stack iterators
t-reftable-stack: add test for non-default compaction factor
t-reftable-stack: use reftable_ref_record_equal() to compare ref records
t-reftable-stack: use Git's tempfile API instead of mkstemp()
t: harmonize t-reftable-stack.c with coding guidelines
t: move reftable/stack_test.c to the unit testing framework
refs/reftable: wire up support for exclude patterns
Exclude patterns can be used by reference backends to skip over blocks
of references that are uninteresting to the caller. Reference backends
do not have to wire up support for them, and all callers are expected to
behave as if the backend didn't support them. In fact, the only backend
that supports exclude patterns right now is the "packed" backend.
Exclude patterns can be quite an important performance optimization in
repositories that have loads of references. The patterns are set up in
case "transfer.hideRefs" and friends are configured during a fetch, so
handling these patterns becomes important once there are lots of hidden
refs in a served repository.
Now that we have properly re-seekable reftable iterators we can also
wire up support for these patterns in the "reftable" backend. Doing so
is conceptually simple: once we hit a reference whose prefix matches the
current exclude pattern we re-seek the iterator to the first reference
that doesn't match the pattern anymore. This schema only works for
trivial patterns that do not have any globbing characters in them, but
this restriction also applies do the "packed" backend.
This makes t1419 work with the "reftable" backend with some slight
modifications. Of course it also speeds up listing of references with
hidden refs. The following benchmark prints one reference with 1 million
hidden references:
Benchmark 1: HEAD~
Time (mean ± σ): 93.3 ms ± 2.1 ms [User: 90.3 ms, System: 2.5 ms]
Range (min … max): 89.8 ms … 97.2 ms 33 runs
Benchmark 2: HEAD
Time (mean ± σ): 4.2 ms ± 0.6 ms [User: 2.2 ms, System: 1.8 ms]
Range (min … max): 3.1 ms … 8.1 ms 765 runs
Summary
HEAD ran
22.15 ± 3.19 times faster than HEAD~
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 67ce50ba26 (Merge branch 'ps/reftable-reusable-iterator', 2024-05-30)
we have refactored the interface of reftable iterators such that they
can be reused in theory. This patch series only landed the required
changes on the interface level, but didn't yet implement the actual
logic to make iterators reusable.
As it turns out almost all of the infrastructure already does support
re-seeking. The only exception is the table iterator, which does not
reset its `is_finished` bit. Do so and add a couple of tests that verify
that we can re-seek iterators.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have recently migrated all of the reftable unit tests that were part
of the reftable library into our own unit testing framework. As part of
that migration we have duplicated some of the functionality that was
part of the reftable test framework into each of the migrated test
suites. This was a sensible decision to not have all of the migrations
dependent on each other, but now that the migration is done it makes
sense to deduplicate the functionality again.
Introduce a new reftable test library that hosts some shared code and
adapt tests to use it.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever one adds another test library compilation unit one has to wire
it up twice in the Makefile: once to append it to `UNIT_TEST_OBJS`, and
once to append it to the `UNIT_TEST_PROGS` target. Ideally, we'd just
reuse the `UNIT_TEST_OBJS` variable in the target so that we can avoid
the duplication. But it also contains all the objects for our test
programs, each of which contains a `cmd_main()`, and thus we cannot link
them all into the target executable.
Refactor the code such that `UNIT_TEST_OBJS` does not contain the unit
test program objects anymore, which we can instead manually append to
the `OBJECTS` variable. Like this, the former variable now only contains
objects for test libraries and can thus be reused.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/receive-pack: fix exclude patterns when announcing refs
In `write_head_info()` we announce references to the remote client. We
need to honor "transfer.hideRefs" here so that we do not announce any
references that the client shouldn't be able to learn about. This is
done via two separate mechanisms:
- We hand over exclude patterns to the reference backend. We can only
honor "plain" exclude patterns here that do not have prefixes with
special meaning such as "^" or "!". Filtering down the references is
handled by `hidden_refs_to_excludes()`.
- In `show_ref_cb()` we perform a second check against hidden refs.
For one this is done such that we can handle those special prefixes.
And second, handling exclude patterns in ref backends is optional,
so we also have to handle "normal" patterns.
The special-meaning "^" prefix alters whether a hidden ref applies to
the namespace-stripped reference name or the full name. So while we
would usually call `refs_for_each_namespaced_ref()` to only get those
references in the current namespace, we can't because we'd get the
already-rewritten reference names. Instead, we are forced to use
`refs_for_each_fullref_in()` and then manually strip away the namespace
prefix such that we have access to both names.
But this also means that we do not get namespace handling for exclude
patterns, which `refs_for_each_namespaced_ref()` brings for free. This
results in a bug because we potentially end up hiding away references
based on their namespaced name and not on the stripped name as we really
should be doing.
Fix this by manually rewriting the exclude patterns to their namespaced
variants.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs: properly apply exclude patterns to namespaced refs
Reference namespaces allow commands like git-upload-pack(1) to serve
different sets of references to the client depending on which namespace
is enabled, which is for example useful in fork networks. Namespaced
refs are stored with a `refs/namespaces/$namespace` prefix, but all the
user will ultimately see is a stripped version where that prefix is
removed.
The way that this interacts with "transfer.hideRefs" is not immediately
obvious: the hidden refs can either apply to the stripped references, or
to the non-stripped ones that still have the namespace prefix. In fact,
the "transfer.hideRefs" machinery does the former and applies to the
stripped reference by default, but rules can have "^" prefixed to switch
this behaviour to instead match against the full reference name.
Namespaces are exclusively handled at the generic "refs" layer, the
respective backends have no clue that such a thing even exists. This
also has the consequence that they cannot handle hiding references as
soon as reference namespaces come into play because they neither know
whether a namespace is active, nor do they know how to strip references
if they are active.
Handling such exclude patterns in `refs_for_each_namespaced_ref()` and
`refs_for_each_fullref_in_prefixes()` is broken though, as both support
that the user passes both namespaces and exclude patterns. In the case
where both are set we will exclude references with unstripped names,
even though we really wanted to exclude references based on their
stripped names.
This only surfaces when:
- A repository uses reference namespaces.
- "transfer.hideRefs" is active.
- The namespaced references are packed into the "packed-refs" file.
None of our tests exercise this scenario, and thus we haven't ever hit
it. While t5509 exercises both (1) and (2), it does not happen to hit
(3). It is trivial to demonstrate the bug though by explicitly packing
refs in the tests, and then we indeed surface the breakage.
Fix this bug by prefixing exclude patterns with the namespace in the
generic layer. The newly introduced function will be used outside of
"refs.c" in the next patch, so we add a declaration to "refs.h".
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment GIT_ADVICE has been intentionally kept undocumented
to discourage its use by interactive users. Add documentation to
help tool writers.
* ds/doc-wholesale-disabling-advice-messages:
advice: recommend GIT_ADVICE=0 for tools
Junio C Hamano [Fri, 13 Sep 2024 22:27:42 +0000 (15:27 -0700)]
Merge branch 'jk/sparse-fdleak-fix'
A file descriptor left open is now properly closed when "git
sparse-checkout" updates the sparse patterns.
* jk/sparse-fdleak-fix:
sparse-checkout: use fdopen_lock_file() instead of xfdopen()
sparse-checkout: check commit_lock_file when writing patterns
sparse-checkout: consolidate cleanup when writing patterns
Junio C Hamano [Fri, 13 Sep 2024 22:26:49 +0000 (15:26 -0700)]
Merge branch 'jk/free-commit-buffer-of-skipped-commits' into maint-2.46
The code forgot to discard unnecessary in-core commit buffer data
for commits that "git log --skip=<number>" traversed but omitted
from the output, which has been corrected.
* jk/free-commit-buffer-of-skipped-commits:
revision: free commit buffers for skipped commits
Junio C Hamano [Thu, 12 Sep 2024 18:47:23 +0000 (11:47 -0700)]
Merge branch 'jk/messages-with-excess-lf-fix'
One-line messages to "die" and other helper functions will get LF
added by these helper functions, but many existing messages had an
unnecessary LF at the end, which have been corrected.
* jk/messages-with-excess-lf-fix:
drop trailing newline from warning/error/die messages
Junio C Hamano [Thu, 12 Sep 2024 18:47:23 +0000 (11:47 -0700)]
Merge branch 'ps/pack-refs-auto-heuristics'
"git pack-refs --auto" for the files backend was too aggressive,
which has been a bit tamed.
* ps/pack-refs-auto-heuristics:
refs/files: use heuristic to decide whether to repack with `--auto`
t0601: merge tests for auto-packing of refs
wrapper: introduce `log2u()`
Junio C Hamano [Thu, 12 Sep 2024 18:47:23 +0000 (11:47 -0700)]
Merge branch 'tb/multi-pack-reuse-fix'
A data corruption bug when multi-pack-index is used and the same
objects are stored in multiple packfiles has been corrected.
* tb/multi-pack-reuse-fix:
builtin/pack-objects.c: do not open-code `MAX_PACK_OBJECT_HEADER`
pack-bitmap.c: avoid repeated `pack_pos_to_offset()` during reuse
builtin/pack-objects.c: translate bit positions during pack-reuse
pack-bitmap: tag bitmapped packs with their corresponding MIDX
t/t5332-multi-pack-reuse.sh: verify pack generation with --strict
Junio C Hamano [Thu, 12 Sep 2024 18:02:16 +0000 (11:02 -0700)]
Merge branch 'ps/bundle-outside-repo-fix' into maint-2.46
"git bundle unbundle" outside a repository triggered a BUG()
unnecessarily, which has been corrected.
* ps/bundle-outside-repo-fix:
bundle: default to SHA1 when reading bundle headers
builtin/bundle: have unbundle check for repo before opening its bundle
Junio C Hamano [Thu, 12 Sep 2024 18:02:16 +0000 (11:02 -0700)]
Merge branch 'jc/patch-id' into maint-2.46
The patch parser in "git patch-id" has been tightened to avoid
getting confused by lines that look like a patch header in the log
message.
cf. <Zqh2T_2RLt0SeKF7@tanuki>
* jc/patch-id:
patch-id: tighten code to detect the patch header
patch-id: rewrite code that detects the beginning of a patch
patch-id: make get_one_patchid() more extensible
patch-id: call flush_current_id() only when needed
t4204: patch-id supports various input format
The code forgot to discard unnecessary in-core commit buffer data
for commits that "git log --skip=<number>" traversed but omitted
from the output, which has been corrected.
* jk/free-commit-buffer-of-skipped-commits:
revision: free commit buffers for skipped commits
Junio C Hamano [Mon, 9 Sep 2024 17:13:44 +0000 (10:13 -0700)]
Merge branch 'cp/unit-test-reftable-stack' into ps/reftable-exclude
* cp/unit-test-reftable-stack:
t-reftable-stack: add test for stack iterators
t-reftable-stack: add test for non-default compaction factor
t-reftable-stack: use reftable_ref_record_equal() to compare ref records
t-reftable-stack: use Git's tempfile API instead of mkstemp()
t: harmonize t-reftable-stack.c with coding guidelines
t: move reftable/stack_test.c to the unit testing framework
reftable_stack_init_ref_iterator and reftable_stack_init_log_iterator
as defined by reftable/stack.{c,h} initialize a stack iterator to
iterate over the ref and log records in a reftable stack respectively.
Since these functions are not exercised by any of the existing tests,
add a test for them.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t-reftable-stack: add test for non-default compaction factor
In a recent codebase update (commit ae8e378430, merge branch
'ps/reftable-write-options', 2024/05/13) the geometric factor used
in auto-compaction of reftable tables was made configurable. Add
a test to verify the functionality introduced by this update.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t-reftable-stack: use reftable_ref_record_equal() to compare ref records
In the current stack tests, ref records are compared for equality
by sometimes using the dedicated function for ref-record comparison,
reftable_ref_record_equal(), and sometimes by explicity comparing
contents of the ref records.
The latter method is undesired because there can exist unequal ref
records with some of the contents being equal. Replace the latter
instances of ref-record comparison with the former. This has the
added benefit of preserving uniformity throughout the test file.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when 7cc91a2f (Add the configuration option skipFetchAll,
2009-11-09) added for the sole purpose of adding skipFetchAll as a
synonym to skipDefaultUpdate, there was no explanation about the
reason why it was needed., but these two configuration variables
mean exactly the same thing.
Also, when we taught the "prefetch" task to "git maintenance" later,
we did make it pay attention to the setting, but we forgot to
document it.
Document these variables as synonyms that collectively implements
the last-one-wins semantics, and also clarify that the prefetch task
is also controlled by this variable.
Ramsay Jones [Mon, 9 Sep 2024 01:23:48 +0000 (02:23 +0100)]
config.mak.uname: add HAVE_DEV_TTY to cygwin config section
If neither HAVE_DEV_TTY nor GIT_WINDOWS_NATIVE is set, while compiling
the 'compat/terminal.c' code, then the fallback code calls the system
getpass() function. Unfortunately, this ignores the 'echo' parameter of
the git_terminal_prompt() function, since it has no way to implement that
functionality. This results in a less than optimal user experience on
cygwin, which does not define either of those build flags.
However, cygwin does have a functional '/dev/tty', so that it can build
with HAVE_DEV_TTY and benefit from the improved user experience.
The improved git_terminal_prompt() function that comes with HAVE_DEV_TTY
is used in the git_prompt() function, which in turn is used by the
'git credential', 'git bisect' and 'git help' commands. In addition to
git_terminal_prompt(), read_key_without_echo() is likewise improved and
used by the 'git add -p' command.
While using the 'git credential fill' command, for example:
$ printf "%s\n" protocol=https host=example.com path=git | ./git credential fill
Username for 'https://example.com': user
Password for 'https://user@example.com':
protocol=https
host=example.com
username=user
password=pass
$
The 'user' name is now echoed while typing (the password isn't), where this
wasn't the case before.
When using the auto-correct feature:
$ ./git -c help.autocorrect=prompt fred
WARNING: You called a Git command named 'fred', which does not exist.
Run 'grep' instead [y/N]? n
$ ./git -c help.autocorrect=prompt fred
WARNING: You called a Git command named 'fred', which does not exist.
Run 'grep' instead [y/N]? y
fatal: no pattern given
$
The user can actually see what they are typing at the prompt. Similar
comments apply to 'git bisect':
$ ./git bisect bad master~1
You need to start by "git bisect start"
Do you want me to do it for you [Y/n]? y
status: waiting for both good and bad commits
status: waiting for good commit(s), bad commit known
$ ./git bisect reset
Already on 'master-tmp'
$
$ ./git bisect start
status: waiting for both good and bad commits
$ ./git bisect bad master~1
status: waiting for good commit(s), bad commit known
$ ./git bisect next
warning: bisecting only with a bad commit
Are you sure [Y/n]? n
$ ./git bisect reset
Already on 'master-tmp'
$
The read_key_without_echo() function leads to a much improved 'git add -p'
command, when the 'interactive.singleKey' configuration is set:
$ cd ..
$ mkdir test-git
$ cd test-git
$ git init -q
$ echo foo >file
$ git add file
$ echo bar >file
$ ../git/git -c interactive.singleKey=true add -p
diff --git a/file b/file
index 257cc56..5716ca5 100644
--- a/file
+++ b/file
@@ -1 +1 @@
-foo
+bar
(1/1) Stage this hunk [y,n,q,a,d,e,p,?]? y
$
Note that, not only is the user input echoed, but that it is immediately
accepted (without having to type <return>) and the program exits with the
hunk staged (in this case) or not.
In order to reap these benefits, set the HAVE_DEV_TTY build flag in the
cygwin configuration section of config.mak.uname.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t-reftable-stack: use Git's tempfile API instead of mkstemp()
Git's tempfile API defined by $GIT_DIR/tempfile.{c,h} provides
a unified interface for tempfile operations. Since reftable/stack.c
uses this API for all its tempfile needs instead of raw functions
like mkstemp(), make the ported stack test strictly use Git's
tempfile API as well.
A bigger benefit is the fact that we know to clean up the tempfile
in case the test fails because it gets registered and pruned via a
signal handler.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: harmonize t-reftable-stack.c with coding guidelines
Harmonize the newly ported test unit-tests/t-reftable-stack.c
with the following guidelines:
- Single line 'for' statements must omit curly braces.
- Structs must be 0-initialized with '= { 0 }' instead of '= { NULL }'.
- Array sizes and indices should preferably be of type 'size_t' and
not 'int'.
- Function pointers should be passed as 'func' and not '&func'.
While at it, remove initialization for those variables that are
re-used multiple times, like loop variables.
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t: move reftable/stack_test.c to the unit testing framework
reftable/stack_test.c exercises the functions defined in
reftable/stack.{c, h}. Migrate reftable/stack_test.c to the
unit testing framework. Migration involves refactoring the tests
to use the unit testing framework instead of reftable's test
framework and renaming the tests to be in-line with unit-tests'
standards.
Since some of the tests use set_test_hash() defined by
reftable/test_framework.{c, h} but these files are not
'#included' in the test file, copy this function in the
ported test file.
With the migration of stack test to the unit-tests framework,
"test-tool reftable" becomes a no-op. Hence, get rid of everything
that uses "test-tool reftable" alongside everything that is used
to implement it.
While at it, alphabetically sort the cmds[] list in
helper/test-tool.c by moving the entry for "dump-reftable".
Mentored-by: Patrick Steinhardt <ps@pks.im> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 8 Sep 2024 07:08:35 +0000 (09:08 +0200)]
diff: report dirty submodules as changes in builtin_diff()
The diff machinery has two ways to detect changes to set the exit code:
Just comparing hashes and comparing blob contents. The latter is needed
if certain changes have to be ignored, e.g. with --ignore-space-change
or --ignore-matching-lines. It's enabled by the diff_options flag
diff_from_contents.
The slower mode as never considered submodules (and subrepos) as changes
with --submodule=diff or --submodule=log, which is inconsistent with
--submodule=short (the default). Fix it.
d7b97b7185 (diff: let external diffs report that changes are
uninteresting, 2024-06-09) set diff_from_contents if external diff
programs are allowed. This is the default e.g. for git diff, and so
that change exposed the inconsistency much more widely.
Reported-by: David Hull <david.hull@friendbuy.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 8 Sep 2024 07:05:44 +0000 (09:05 +0200)]
diff: report copies and renames as changes in run_diff_cmd()
The diff machinery has two ways to detect changes to set the exit code:
Just comparing hashes and comparing blob contents. The latter is needed
if certain changes have to be ignored, e.g. with --ignore-space-change
or --ignore-matching-lines. It's enabled by the diff_options flag
diff_from_contents.
The slower mode has never considered copies and renames to be changes,
which is inconsistent with the quicker one. Fix it. Even if we ignore
the file contents (because it's empty or contains only ignored lines),
there's still the meta data change of adding or changing a filename, so
we need to report it in the exit code.
d7b97b7185 (diff: let external diffs report that changes are
uninteresting, 2024-06-09) set diff_from_contents if external diff
programs are allowed. This is the default e.g. for git diff, and so
that change exposed the inconsistency much more widely.
Reported-by: Jorge Luis Martinez Gomez <jol@jol.dev> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The GIT_ADVICE environment variable was added implicitly in b79deeb5544
(advice: add --no-advice global option, 2024-05-03) but was not
documented. Add documentation to show that it is an option for tools
that want to disable these messages. Make note that while the
--no-advice option exists, older Git versions will fail to parse that
option. The environment variable presents a way to change the behavior
of Git versions that understand it without disrupting older versions.
Co-authored-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some large repositories use tags to track a huge list of release
versions. While this choice is costly on the ref advertisement, it is
further wasteful for clients who do not need those tags. Allow clients
to optionally skip the tag advertisement.
This behavior is similar to that of 'git clone --no-tags' implemented in 0dab2468ee5 (clone: add a --no-tags option to clone without tags,
2017-04-26), including the modification of the remote.origin.tagOpt
config value to include "--no-tags".
One thing that is opposite of the 'git clone' implementation is that
this allows '--tags' as an assumed option, which can be naturally negated
with '--no-tags'. The clone command does not accept '--tags' but allows
"--no-no-tags" as the negation of its '--no-tags' option.
While testing this option, combine the test with the previously untested
'--no-src' option introduced in 4527db8ff8c (scalar: add --[no-]src
option, 2023-08-28).
Signed-off-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 6 Sep 2024 17:38:49 +0000 (10:38 -0700)]
Merge branch 'jk/unused-parameters'
Make our codebase compilable with the -Werror=unused-parameter
option.
* jk/unused-parameters:
CodingGuidelines: mention -Wunused-parameter and UNUSED
config.mak.dev: enable -Wunused-parameter by default
compat: mark unused parameters in win32/mingw functions
compat: disable -Wunused-parameter in win32/headless.c
compat: disable -Wunused-parameter in 3rd-party code
t-reftable-readwrite: mark unused parameter in callback function
gc: mark unused config parameter in virtual functions
Brian Lyles [Fri, 6 Sep 2024 14:50:08 +0000 (09:50 -0500)]
interpret-trailers: handle message without trailing newline
When git-interpret-trailers is used to add a trailer to a message that
does not end in a trailing newline, the new trailer is added on the line
immediately following the message instead of as a trailer block
separated from the message by a blank line.
For example, if a message's text was exactly "The subject" with no
trailing newline present, `git interpret-trailers --trailer
my-trailer=true` will result in the following malformed commit message:
The subject
my-trailer: true
While it is generally expected that a commit message should end with a
newline character, git-interpret-trailers should not be returning an
invalid message in this case.
Use `strbuf_complete_line` to ensure that the message ends with a
newline character when reading the input.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 6 Sep 2024 03:48:41 +0000 (23:48 -0400)]
sparse-checkout: use fdopen_lock_file() instead of xfdopen()
When updating sparse patterns, we open a lock_file to write out the new
data. The lock_file struct holds the file descriptor, but we call
fdopen() to get a stdio handle to do the actual write.
After we finish writing, we fflush() so that all of the data is on disk,
and then call commit_lock_file() which closes the descriptor. But we
never fclose() the stdio handle, leaking it.
The obvious solution seems like it would be to just call fclose(). But
when? If we do it before commit_lock_file(), then the lock_file code is
left thinking it owns the now-closed file descriptor, and will do an
extra close() on the descriptor. But if we do it before, we have the
opposite problem: the lock_file code will close the descriptor, and
fclose() will do the extra close().
We can handle this correctly by using fdopen_lock_file(). That leaves
ownership of the stdio handle with the lock_file, which knows not to
double-close it.
We do have to adjust the code a bit:
- we have to handle errors ourselves; we can just die(), since that's
what xfdopen() would have done (and we can even provide a more
specific error message).
- we no longer need to call fflush(); committing the lock-file
auto-closes it, which will now do the flush for us. As a bonus, this
will actually check that the flush was successful before renaming
the file into place.
- we can get rid of the local "fd" variable, since we never look at it
ourselves now
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 6 Sep 2024 03:47:38 +0000 (23:47 -0400)]
sparse-checkout: check commit_lock_file when writing patterns
When writing a new "sparse-checkout" file, we do the usual strategy of
writing to a lockfile and committing it into place. But we don't check
the outcome of commit_lock_file(). Failing there would prevent us from
writing a bogus file (good), but we would ignore the error and return a
successful exit code (bad).
Fix this by calling die(). Note that we need to keep the sparse_filename
variable valid for longer, since the filename stored in the lock_file
struct will be dropped when we run commit_lock_file().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 6 Sep 2024 03:47:08 +0000 (23:47 -0400)]
sparse-checkout: consolidate cleanup when writing patterns
In write_patterns_and_update(), we always need to free the pattern list
before exiting the function. Rather than handling it manually when we
return early, we can jump to an "out" label where cleanup happens. This
let us drop one line, but also establishes a pattern we can use for
other cleanup.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 5 Sep 2024 08:51:49 +0000 (04:51 -0400)]
drop trailing newline from warning/error/die messages
Our error reporting routines append a trailing newline, and the strings
we pass to them should not include them (otherwise we get an extra blank
line after the message).
These cases were all found by looking at the results of:
Note that we _do_ sometimes include a newline in the middle of such
messages, to create multiline output (hence our grep matching "," or ")"
after we see the newline, so we know we're at the end of the string).
It's possible that one or more of these cases could intentionally be
including a blank line at the end, but having looked at them all
manually, I think these are all just mistakes.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Lyles [Tue, 3 Sep 2024 22:06:47 +0000 (22:06 +0000)]
builtin/cat-file: mark 'git cat-file' sparse-index compatible
This change affects how 'git cat-file' works with the index when
specifying an object with the ":<path>" syntax (which will give file
contents from the index).
'git cat-file' expands a sparse index to a full index any time contents
are requested from the index by specifying an object with the ":<path>"
syntax. This is true even when the requested file is part of the sparse
index, and results in much slower 'git cat-file' operations when working
within the sparse index.
Mark 'git cat-file' as not needing a full index, so that you only pay
the cost of expanding the sparse index to a full index when you request
a file outside of the sparse index.
Add tests to ensure both that:
- 'git cat-file' returns the correct file contents whether or not the
file is in the sparse index
- 'git cat-file' expands to the full index any time you request
something outside of the sparse index
Signed-off-by: Kevin Lyles <klyles+github@epic.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
