The userprogs infrastructure does not expect clang being used with GNU ld
and in that case uses /usr/bin/ld for linking, not the configured $(LD).
This fallback is problematic as it will break when cross-compiling.
Mixing clang and GNU ld is used for example when building for SPARC64,
as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst.
Relax the check around --ld-path so it gets used for all linkers.
Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nathan: Work around wrapping '--ld-path' in cc-option in older stable
branches due to older minimum LLVM version] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During a device-initiated disconnect, the End Transfer command resets
the event filter, allowing a new xferNotReady event to be generated
before the controller is fully halted. Processing this late event
incorrectly triggers a Start Transfer, which prevents the controller
from halting and results in a DSTS.DEVCTLHLT bit polling timeout.
Ignore the late xferNotReady event if the controller is already in a
disconnected state.
Many Realtek USB Wi-Fi dongles released in recent years have two modes:
one is driver CD mode which has Windows driver onboard, another one is
Wi-Fi mode. Add the US_FL_IGNORE_DEVICE quirk for these multi-mode devices.
Otherwise, usb_modeswitch may fail to switch them to Wi-Fi mode.
Currently there are only two USB IDs known to be used by these multi-mode
Wi-Fi dongles: 0bda:1a2b and 0bda:a192.
Since 'bcs->Residue' has the data type '__le32', convert it to the
correct byte order of the CPU using this driver when assigning it to
the local variable 'residue'.
Add the US_FL_BULK_IGNORE_TAG quirk for Novatek NTK96550-based camera
to fix USB resets after sending SCSI vendor commands due to CBW and
CSW tags difference, leading to undesired slowness while communicating
with the device.
Please find below the copy of /sys/kernel/debug/usb/devices with my
device plugged in (listed as TechSys USB mass storage here, the
underlying chipset being the Novatek NTK96550-based camera):
Increase the External ROM access timeouts to prevent failures during
programming of External SPI EEPROM chips. The current timeouts are
too short for some SPI EEPROMs used with uPD720201 controllers.
The current timeout for Chip Erase in renesas_rom_erase() is 100 ms ,
the current timeout for Sector Erase issued by the controller before
Page Program in renesas_fw_download_image() is also 100 ms. Neither
timeout is sufficient for e.g. the Macronix MX25L5121E or MX25V5126F.
MX25L5121E reference manual [1] page 35 section "ERASE AND PROGRAMMING
PERFORMANCE" and page 23 section "Table 8. AC CHARACTERISTICS (Temperature
= 0°C to 70°C for Commercial grade, VCC = 2.7V ~ 3.6V)" row "tCE" indicate
that the maximum time required for Chip Erase opcode to complete is 2 s,
and for Sector Erase it is 300 ms .
MX25V5126F reference manual [2] page 47 section "13. ERASE AND PROGRAMMING
PERFORMANCE (2.3V - 3.6V)" and page 42 section "Table 8. AC CHARACTERISTICS
(Temperature = -40°C to 85°C for Industrial grade, VCC = 2.3V - 3.6V)" row
"tCE" indicate that the maximum time required for Chip Erase opcode to
complete is 3.2 s, and for Sector Erase it is 400 ms .
Update the timeouts such, that Chip Erase timeout is set to 5 seconds,
and Sector Erase timeout is set to 500 ms. Such lengthy timeouts ought
to be sufficient for majority of SPI EEPROM chips.
In get_channel(), the reference obtained by bus_find_device_by_name()
was dropped via put_device() before accessing the device's driver data
Move put_device() after usage to avoid potential issues.
Fix passing a u32 value as a u16 buffer scan item. This works on little-
endian systems, but not on big-endian systems.
A new local variable is introduced for getting the register value and
the array is changed to a struct to make the data layout more explicit
rather than just changing the type and having to recalculate the proper
length needed for the timestamp.
`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.
Fixes: df6e71256c84 ("iio: pressure: bmp280: Explicitly mark GPIO optional") Signed-off-by: Salah Triki <salah.triki@gmail.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
do_change_type() and do_set_group() are operating on different
aspects of the same thing - propagation graph. The latter
asks for mounts involved to be mounted in namespace(s) the caller
has CAP_SYS_ADMIN for. The former is a mess - originally it
didn't even check that mount *is* mounted. That got fixed,
but the resulting check turns out to be too strict for userland -
in effect, we check that mount is in our namespace, having already
checked that we have CAP_SYS_ADMIN there.
What we really need (in both cases) is
* only touch mounts that are mounted. That's a must-have
constraint - data corruption happens if it get violated.
* don't allow to mess with a namespace unless you already
have enough permissions to do so (i.e. CAP_SYS_ADMIN in its userns).
That's an equivalent of what do_set_group() does; let's extract that
into a helper (may_change_propagation()) and use it in both
do_set_group() and do_change_type().
Fixes: 12f147ddd6de "do_change_type(): refuse to operate on unmounted/not ours mounts" Acked-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously a sharing group (shared and master ids pair) can be only
inherited when mount is created via bindmount. This patch adds an
ability to add an existing private mount into an existing sharing group.
With this functionality one can first create the desired mount tree from
only private mounts (without the need to care about undesired mount
propagation or mount creation order implied by sharing group
dependencies), and next then setup any desired mount sharing between
those mounts in tree as needed.
This allows CRIU to restore any set of mount namespaces, mount trees and
sharing group trees for a container.
We have many issues with restoring mounts in CRIU related to sharing
groups and propagation:
- reverse sharing groups vs mount tree order requires complex mounts
reordering which mostly implies also using some temporary mounts
(please see https://lkml.org/lkml/2021/3/23/569 for more info)
- mount() syscall creates tons of mounts due to propagation
- mount re-parenting due to propagation
- "Mount Trap" due to propagation
- "Non Uniform" propagation, meaning that with different tricks with
mount order and temporary children-"lock" mounts one can create mount
trees which can't be restored without those tricks
(see https://www.linuxplumbersconf.org/event/7/contributions/640/)
With this new functionality we can resolve all the problems with
propagation at once.
Link: https://lore.kernel.org/r/20210715100714.120228-1-ptikhomirov@virtuozzo.com Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Mattias Nissler <mnissler@chromium.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: lkml <linux-kernel@vger.kernel.org> Co-developed-by: Andrei Vagin <avagin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Stable-dep-of: cffd0441872e ("use uniform permission checks for all mount propagation changes") Signed-off-by: Sasha Levin <sashal@kernel.org>
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/20250811141830.343774-1-yebin@huaweicloud.com Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Drop userspace_pm.sh from TEST_PROGS ] Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Drop mptcp_sockopt.sh from TEST_PROGS, and drop "sendfile" which is
not supported in this version. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dce110_fill_display_configs is shared between DCE 6-11, and
finding the first CRTC and its line time is relevant to DCE 6 too.
Move the code to find it from DCE 11 specific code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On DCE 6, DP audio was not working. However, it worked when an
HDMI monitor was also plugged in.
Looking at dce_aud_wall_dto_setup it seems that the main
difference is that we use DTO1 when only DP is plugged in.
When programming DTO1, it uses audio_dto_source_clock_in_khz
which is set from get_dp_ref_freq_khz
The dce60_get_dp_ref_freq_khz implementation looks incorrect,
because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6,
so it isn't usable.
I compared dce60_get_dp_ref_freq_khz to the legacy display code,
specifically dce_v6_0_audio_set_dto, and it turns out that in
case of DCE 6, it needs to use the display clock. With that,
DP audio started working on Pitcairn, Oland and Cape Verde.
However, it still didn't work on Tahiti. Despite having the
same DCE version, Tahiti seems to have a different audio device.
After some trial and error I realized that it works with the
default display clock as reported by the VBIOS, not the current
display clock.
For later VBIOS versions, the fractional feedback divider is
calculated as the remainder of dividing the feedback divider by
a factor, which is set to 1000000. For reference, see:
- calculate_fb_and_fractional_fb_divider
- calc_pll_max_vco_construct
However, in case of old VBIOS versions that have
set_pixel_clock_v3, they only have 1 byte available for the
fractional feedback divider, and it's expected to be set to the
remainder from dividing the feedback divider by 10.
For reference see the legacy display code:
- amdgpu_pll_compute
- amdgpu_atombios_crtc_program_pll
This commit fixes set_pixel_clock_v3 by dividing the fractional
feedback divider passed to the function by 100000.
Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 027e7acc7e17802ebf28e1edb88a404836ad50d6) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HP EliteBook x360 830 G6 and HP EliteBook 830 G6 have
Realtek HDA codec ALC215. It needs the ALC285_FIXUP_HP_GPIO_LED
quirk to enable the mute LED.
The existing memstick core patch: commit 62c59a8786e6 ("memstick: Skip
allocating card when removing host") sets host->removing in
memstick_remove_host(),but still exists a critical time window where
memstick_check can run after host->eject is set but before removing is set.
In the rtsx_usb_ms driver, the problematic sequence is:
1. rtsx_usb_ms_drv_remove sets host->eject = true
2. cancel_work_sync(&host->handle_req) runs
3. memstick_check work may be executed here <-- danger window
4. memstick_remove_host sets removing = 1
During this window (step 3), memstick_check calls memstick_alloc_card,
which may indefinitely waiting for mrq_complete completion that will
never occur because rtsx_usb_ms_request sees eject=true and skips
scheduling work, memstick_set_rw_addr waits forever for completion.
This causes a deadlock when memstick_remove_host tries to flush_workqueue,
waiting for memstick_check to complete, while memstick_check is blocked
waiting for mrq_complete completion.
Fix this by setting removing=true at the start of rtsx_usb_ms_drv_remove,
before any work cancellation. This ensures memstick_check will see the
removing flag immediately and exit early, avoiding the deadlock.
For htb_next_rb_node(), after calling the 1st htb_deactivate(), the
clprio[prio]->ptr could be already set to NULL, which means
htb_next_rb_node() is vulnerable here.
For htb_deactivate(), although we checked qlen before calling it, in
case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again
which triggers the warning inside.
To fix the issues here, we need to:
1) Make htb_deactivate() idempotent, that is, simply return if we
already call it before.
2) Make htb_next_rb_node() safe against ptr==NULL.
Many thanks to Alan for testing and for the reproducer.
Fixes: 5ba8b837b522 ("sch_htb: make htb_qlen_notify() idempotent") Reported-by: Alan J. Wylie <alan@wylie.me.uk> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250428232955.1740419-2-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After making all ->qlen_notify() callbacks idempotent, now it is safe to
remove the check of qlen!=0 from both fq_codel_dequeue() and
codel_qdisc_dequeue().
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211636.166257-1-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qfq_qlen_notify() always deletes its class from its active list
with list_del_init() _and_ calls qfq_deactivate_agg() when the whole list
becomes empty.
To make it idempotent, just skip everything when it is not in the active
list.
Also change other list_del()'s to list_del_init() just to be extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-5-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hfsc_qlen_notify() is not idempotent either and not friendly
to its callers, like fq_codel_dequeue(). Let's make it idempotent
to ease qdisc_tree_reduce_backlog() callers' life:
1. update_vf() decreases cl->cl_nactive, so we can check whether it is
non-zero before calling it.
2. eltree_remove() always removes RB node cl->el_node, but we can use
RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-4-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drr_qlen_notify() always deletes the DRR class from its active list
with list_del(), therefore, it is not idempotent and not friendly
to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-3-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
htb_qlen_notify() always deactivates the HTB class and in fact could
trigger a warning if it is already deactivated. Therefore, it is not
idempotent and not friendly to its callers, like fq_codel_dequeue().
Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211033.166059-2-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The panic happens in br_dev_queue_push_xmit() once it receives a
corrupted skb with ETH header already pushed in linear data. When it
attempts the skb_push() call, there's not enough headroom and
skb_push() panics.
The corrupted skb is put on the queue by HSR layer, which makes a
sequence of unintended transformations when it receives a specific
corrupted HSR frame (with incomplete TAG).
Fix it by dropping and consuming frames that are not long enough to
contain both ethernet and hsr headers.
Alternative fix would be to check for enough headroom before skb_push()
in br_dev_queue_push_xmit().
In the reproducer, this is injected via AF_PACKET, but I don't easily
see why it couldn't be sent over the wire from adjacent network.
Further Details:
In the reproducer, the following network interface chain is set up:
To trigger the events leading up to crash, reproducer sends a corrupted
HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'.
The first HSR-layer function to process this frame is
hsr_handle_frame(). It and then checks if the
protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that
the skb is long enough. For the crashing frame it is not, and hence the
skb->network_header and skb->mac_len fields are set incorrectly,
pointing after the end of the linear buffer.
I will call this a BUG#1 and it is what is addressed by this patch. In
the crashing scenario before the fix, the skb continues to go down the
hsr path as follows.
hsr_handle_frame() then calls this sequence
hsr_forward_skb()
fill_frame_info()
hsr->proto_ops->fill_frame_info()
hsr_fill_frame_info()
hsr_fill_frame_info() contains a check that intends to check whether the
skb actually contains the HSR header. But the check relies on the
skb->mac_len field which was erroneously setup due to BUG#1, so the
check passes and the execution continues back in the hsr_forward_skb():
In create_stripped_skb_hsr(), a copy of the skb is created and is
further corrupted by operation that attempts to strip the HSR tag in a
call to __pskb_copy().
The skb enters create_stripped_skb_hsr() with ethernet header pushed in
linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of
ethernet header into the headroom, creating skb_in with a headroom of
size 8. The subsequent __pskb_copy() then creates an skb with headroom
of just 2 and skb->len of just 12, this is how it looks after the copy:
gdb) p skb->len
$10 = 12
(gdb) p skb->data
$11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373",
(gdb) p skb->head
$12 = (unsigned char *) 0xffff888041e45380 ""
It seems create_stripped_skb_hsr() assumes that ETH header is pulled
in the headroom when it's entered, because it just pulls HSR header on
top. But that is not the case in our code-path and we end up with the
corrupted skb instead. I will call this BUG#2
*I got confused here because it seems that under no conditions can
create_stripped_skb_hsr() work well, the assumption it makes is not true
during the processing of hsr frames - since the skb_push() in
hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I
missed something here.*
Next, the execution arrives in hsr_deliver_master(). It calls
skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have
enough space for the pull (as it only has 12 bytes in total at this
point).
*The skb_pull() here further suggests that ethernet header is meant
to be pushed through the whole hsr processing and
create_stripped_skb_hsr() should pull it before doing the HSR header
pull.*
hsr_deliver_master() then puts the corrupted skb on the queue, it is
then picked up from there by bridge frame handling layer and finally
lands in br_dev_queue_push_xmit where it panics.
Cc: stable@kernel.org Fixes: 48b491a5cc74 ("net: hsr: fix mac_len checks") Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com Signed-off-by: Jakub Acs <acsjakub@amazon.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check to ensure that the packet size does not exceed the number of
available words after reading the packet header from shared memory. This
ensures that the size provided by the firmware is safe to process and
prevent potential out-of-bounds memory access.
ov2659_probe() doesn't properly free control handler resources in failure
paths, causing memory leaks. Add v4l2_ctrl_handler_free() to prevent these
memory leaks and reorder the ctrl_handler assignment for better code flow.
Fixes: c4c0283ab3cd ("[media] media: i2c: add support for omnivision's ov2659 sensor") Cc: stable@vger.kernel.org Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the interrupt handler rain_interrupt(), the buffer full check on
rain->buf_len is performed before acquiring rain->buf_lock. This
creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as
rain->buf_len is concurrently accessed and modified in the work
handler rain_irq_work_handler() under the same lock.
Multiple interrupt invocations can race, with each reading buf_len
before it becomes full and then proceeding. This can lead to both
interrupts attempting to write to the buffer, incrementing buf_len
beyond its capacity (DATA_SIZE) and causing a buffer overflow.
Fix this bug by moving the spin_lock() to before the buffer full
check. This ensures that the check and the subsequent buffer modification
are performed atomically, preventing the race condition. An corresponding
spin_unlock() is added to the overflow path to correctly release the
lock.
This possible bug was found by an experimental static analysis tool
developed by our team.
Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an program is streaming (ffplay) and another program (qv4l2)
changes the TV standard from NTSC to PAL, the kernel crashes due to trying
to copy to unmapped memory.
Changing from NTSC to PAL increases the resolution in the usbtv struct,
but the video plane buffer isn't adjusted, so it overflows.
Fixes: 0e0fe3958fdd13d ("[media] usbtv: Add support for PAL video source") Cc: stable@vger.kernel.org Signed-off-by: Ludwig Disterhof <ludwig@disterhof.eu> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: call vb2_is_busy instead of vb2_is_streaming] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add video_device_release() in label 'err_m2m' to release the memory
allocated by video_device_alloc() and prevent potential memory leaks.
Remove the reduntant code in label 'err_m2m'.
Fixes: a8ef0488cc59 ("media: imx: add csc/scaler mem2mem device") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test pattern is set by a 8-bit register according to the
specification.
+--------+-------------------------------+
| BIT[0] | Solid color |
+--------+-------------------------------+
| BIT[1] | Color bar |
+--------+-------------------------------+
| BIT[2] | Fade to grey color bar |
+--------+-------------------------------+
| BIT[3] | PN9 |
+--------+-------------------------------+
| BIT[4] | Gradient horizontal |
+--------+-------------------------------+
| BIT[5] | Gradient vertical |
+--------+-------------------------------+
| BIT[6] | Check board |
+--------+-------------------------------+
| BIT[7] | Slant pattern |
+--------+-------------------------------+
Based on function above, current test pattern programming is wrong.
This patch fixes it by 'BIT(pattern - 1)'. If pattern is 0, driver
will disable the test pattern generation and set the pattern to 0.
Fixes: e62138403a84 ("media: hi556: Add support for Hi-556 sensor") Cc: stable@vger.kernel.org Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This sd_init() function reads the firmware. The firmware data holds a
series of records and the function reads each record and sends the data
to the device. The request_ihex_firmware() function
calls ihex_validate_fw() which ensures that the total length of all the
records won't read out of bounds of the fw->data[].
However, a potential issue is if there is a single very large
record (larger than PAGE_SIZE) and that would result in memory
corruption. Generally we trust the firmware, but it's always better to
double check.
Fixes: 49b61ec9b5af ("[media] gspca: Add new vicam subdriver") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.
>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.
Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.
Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list()
periodically release j_list_lock after processing a batch of buffers to
avoid long hold times on the j_list_lock. However, since both functions
contend for j_list_lock, the combined time spent waiting and processing
can be significant.
jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when
need_resched() is true to avoid softlockups during prolonged operations.
But jbd2_log_do_checkpoint() only exits its loop when need_resched() is
true, relying on potentially sleeping functions like __flush_batch() or
wait_on_buffer() to trigger rescheduling. If those functions do not sleep,
the kernel may hit a softlockup.
An endpoint driver configfs attributes group is added to the
epf_group list of struct pci_epf_driver by pci_epf_add_cfs() but an
added group is not removed from this list when the attribute group is
unregistered with pci_ep_cfs_remove_epf_group().
Add the missing list_del() call in pci_ep_cfs_remove_epf_group()
to correctly remove the attribute group from the driver list.
With this change, once the loop over all attribute groups in
pci_epf_remove_cfs() completes, the driver epf_group list should be
empty. Add a WARN_ON() to make sure of that.
Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250624114544.342159-3-dlemoal@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doing a list_del() on the epf_group field of struct pci_epf_driver in
pci_epf_remove_cfs() is not correct as this field is a list head, not
a list entry. This list_del() call triggers a KASAN warning when an
endpoint function driver which has a configfs attribute group is torn
down:
==================================================================
BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198
Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319
The Linux hwmon sysfs API values for pwmX_auto_pointY_pwm represent an
integer value between 0 (0%) to 255 (100%) and the pwmX_auto_pointY_temp
represent millidegrees Celcius.
Commit a6d80df47ee2 ("hwmon: (gsc-hwmon) fix fan pwm temperature
scaling") properly addressed the incorrect scaling in the
pwm_auto_point_temp_store implementation but erroneously scaled
the pwm_auto_point_pwm_show (pwm value) instead of the
pwm_auto_point_temp_show (temp value) resulting in:
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_pwm
25500
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_temp
4500
Fix the scaling of these attributes:
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_pwm
255
# cat /sys/class/hwmon/hwmon0/pwm1_auto_point6_temp
45000
Fixes: a6d80df47ee2 ("hwmon: (gsc-hwmon) fix fan pwm temperature scaling") Cc: stable@vger.kernel.org Signed-off-by: Tim Harvey <tharvey@gateworks.com> Link: https://lore.kernel.org/r/20250718200259.1840792-1-tharvey@gateworks.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the i.MX93 TRM, section 67.3.2.1 "MOD register update", the value
of the TPM counter does NOT get updated when writing MOD.MOD unless
SC.CMOD != 0. Therefore, with the current code, assuming the following
sequence:
1) pwm_disable()
2) pwm_apply_might_sleep() /* period is changed here */
3) pwm_enable()
and assuming only one channel is active, if CNT.COUNT is higher than the
MOD.MOD value written during the pwm_apply_might_sleep() call then, when
re-enabling the PWM during pwm_enable(), the counter will end up resetting
after UINT32_MAX - CNT.COUNT + MOD.MOD cycles instead of MOD.MOD cycles as
normally expected.
Fix this problem by forcing a reset of the TPM counter before MOD.MOD is
written.
Add the missing memory barrier to make sure that LMAC source ring
descriptors are written before updating the head pointer to avoid
passing stale data to the firmware on weakly ordered architectures like
aarch64.
Note that non-LMAC rings use MMIO write accessors which have the
required write memory barrier.
A new warning in clang [1] complains that diq_start in
wlc_lcnphy_tx_iqlo_cal() is passed uninitialized as a const pointer to
wlc_lcnphy_common_read_table():
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2728:13: error: variable 'diq_start' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2728 | &diq_start, 1, 16, 69);
| ^~~~~~~~~
The table pointer passed to wlc_lcnphy_common_read_table() should not be
considered constant, as wlc_phy_read_table() is ultimately going to
update it. Remove the const qualifier from the tbl_ptr to clear up the
warning.
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of statterlists related calls. dma_unmap_sg() function
has to be called with the number of elements originally passed to the
dma_map_sg() function, not the one returned in sgtable's nents.
CC: stable@vger.kernel.org Fixes: 425902f5c8e3 ("fpga zynq: Use the scatterlist interface") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20250616120932.1090614-1-m.szyprowski@samsung.com Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()")
inadvertantly added the entry 0x40 (ATA_DRDY) to the stat_table array in
the function ata_to_sense_error(). This entry ties a failed qc which has
a status filed equal to ATA_DRDY to the sense key ILLEGAL REQUEST with
the additional sense code UNALIGNED WRITE COMMAND. This entry will be
used to generate a failed qc sense key and sense code when the qc is
missing sense data and there is no match for the qc error field in the
sense_table array of ata_to_sense_error().
As a result, for a failed qc for which we failed to get sense data (e.g.
read log 10h failed if qc is an NCQ command, or REQUEST SENSE EXT
command failed for the non-ncq case, the user very often end up seeing
the completely misleading "unaligned write command" error, even if qc
was not a write command. E.g.:
Fix this by removing the ATA_DRDY entry from the stat_table array so
that we default to always returning ABORTED COMMAND without any
additional sense code, since we do not know any better. The entry 0x08
(ATA_DRQ) is also removed since signaling ABORTED COMMAND with a parity
error is also misleading (as a parity error would likely be signaled
through a bus error). So for this case, also default to returning
ABORTED COMMAND without any additional sense code. With this, the
previous example error case becomes:
sd 0:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#17 Sense Key : Aborted Command [current]
sd 0:0:0:0: [sda] tag#17 Add. Sense: No additional sense information
sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Together with these fixes, refactor stat_table to make it more readable
by putting the entries comments in front of the entries and using the
defined status bits macros instead of hardcoded values.
Reported-by: Lorenz Brun <lorenz@brun.one> Reported-by: Brandon Schwartz <Brandon.Schwartz@wdc.com> Fixes: 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org Fixes: fc82228a5e38 ("ext4: support fast symlinks from ext3 file systems") Signed-off-by: Andreas Dilger <adilger@whamcloud.com> Reviewed-by: Li Dongyang <dongyangli@ddn.com> Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com> Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121 Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch is wrong as it checks vc_origin against vc_screenbuf,
while in text mode it should compare against vga_vram_base.
As such it broke VGA text scrolling, which can be reproduced like this:
(1) boot a kernel that is configured to use text mode VGA-console
(2) type commands: ls -l /usr/bin | less -S
(3) scroll up/down with cursor-down/up keys
Reported-by: Jari Ruusu <jariruusu@protonmail.com> Cc: stable@vger.kernel.org Cc: Yi Yang <yiyang13@huawei.com> Cc: GONG Ruiqi <gongruiqi1@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIPS32r2 ChaCha code has never been buildable with the clang
assembler. First, clang doesn't support the 'rotl' pseudo-instruction:
error: unknown instruction, did you mean: rol, rotr?
Second, clang requires that both operands of the 'wsbh' instruction be
explicitly given:
error: too few operands for instruction
To fix this, align the code with the real instruction set by (1) using
the real instruction 'rotr' instead of the nonstandard pseudo-
instruction 'rotl', and (2) explicitly giving both operands to 'wsbh'.
To make removing the use of 'rotl' a bit easier, also remove the
unnecessary special-casing for big endian CPUs at
.Lchacha_mips_xor_bytes. The tail handling is actually
endian-independent since it processes one byte at a time. On big endian
CPUs the old code byte-swapped SAVED_X, then iterated through it in
reverse order. But the byteswap and reverse iteration canceled out.
Tested with chacha20poly1305-selftest in QEMU using "-M malta" with both
little endian and big endian mips32r2 kernels.
Fixes: 49aa7c00eddf ("crypto: mips/chacha - import 32r2 ChaCha code from Zinc") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505080409.EujEBwA0-lkp@intel.com/ Link: https://lore.kernel.org/r/20250619225535.679301-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The maximum number of keycodes got bumped to 256 a very long time ago,
but the default keymaps were never adjusted to match. This is causing
the kernel to interpret keycodes above 127 as U+0000 if the shipped
generated keymap is used.
Fix this by mapping all keycodes above 127 to K_HOLE so the kernel
ignores them.
The contents of this patche were generated by rerunning `loadkeys
--mktable --unicode` and only including the changes to map keycodes
above 127 to K_HOLE.
We don't process Unicode characters if the virtual terminal is in raw
mode, so there's no reason why we shouldn't do the same for K_OFF
(especially since people would expect K_OFF to actually turn off all VT
key processing).
On big endian platform like PowerPC, the MHI bus (which is little endian)
does not start properly. The following example shows the error messages by
using QCN9274 WLAN device with ath12k driver:
ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
ath12k_pci 0001:01:00.0: MSI vectors: 1
ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2)
ath12k_pci 0001:01:00.0: failed to start mhi: -110
ath12k_pci 0001:01:00.0: failed to power up :-110
ath12k_pci 0001:01:00.0: failed to create soc core: -110
ath12k_pci 0001:01:00.0: failed to init core: -110
ath12k_pci: probe of 0001:01:00.0 failed with error -110
The issue seems to be with the incorrect DMA address/size used for
transferring the firmware image over BHI. So fix it by converting the DMA
address and size of the BHI vector table to little endian format before
sending them to the device.
Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells") Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
[mani: added stable tag and reworded commit message] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250519145837.958153-1-alexander.wilhelm@westermo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a recent change in clang to expose uninitialized warnings from
const variables [1], there is a warning in cxacru_heavy_init():
drivers/usb/atm/cxacru.c:1104:6: error: variable 'bp' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1113:39: note: uninitialized use occurs here
1113 | cxacru_upload_firmware(instance, fw, bp);
| ^~
drivers/usb/atm/cxacru.c:1104:2: note: remove the 'if' if its condition is always true
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1095:32: note: initialize the variable 'bp' to silence this warning
1095 | const struct firmware *fw, *bp;
| ^
| = NULL
While the warning is technically correct that bp is conditionally passed
uninitialized to cxacru_upload_firmware(), it is ultimately a false
positive warning on the uninitialized use of bp because the same
condition that initializes bp, instance->modem_type->boot_rom_patch, is
the same one that gates the use of bp within cxacru_upload_firmware().
As this warning occurs in clang's frontend before inlining occurs, it
cannot know that these conditions are indentical to avoid the warning.
Manually inline cxacru_upload_firmware() into cxacru_heavy_init(), as
that is its only callsite, so that clang can see that bp is initialized
and used under the same condition, clearing up the warning without any
functional changes to the code (LLVM was already doing this inlining
later).
Move the cursor position rightward after rendering the character,
not before. This avoids complications that arise when the recursive
console_putc call has to wrap the line and/or scroll the display.
This also fixes the linewrap bug that crops off the rightmost column.
When the cursor is at the bottom of the display, a linefeed will not
move the cursor position further downward. Instead, the display scrolls
upward. Avoid the repeated add/subtract sequence by way of a single
subtraction at the initialization of console_struct_num_rows.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/9d4e8c68a456d5f2bc254ac6f87a472d066ebd5e.1743115195.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The freq_tables[] array has num_possible_cpus() elements so, to avoid an
out of bounds access, this loop should be capped at "< nb_cpus" instead
of "<= nb_cpus". The freq_tables[] array is allocated in
armada_8k_cpufreq_init().
Cc: stable@vger.kernel.org Fixes: f525a670533d ("cpufreq: ap806: add cpufreq driver for Armada 8K") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.
In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.
When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().
Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.
Currently, the driver performs a length check of the metadata buffer
before the actual metadata size is known and before the metadata is
decided to be copied. This results in valid metadata buffers being
incorrectly marked as invalid.
Move the length check to occur after the metadata size is determined and
is decided to be copied.
Cc: stable@vger.kernel.org Fixes: 088ead255245 ("media: uvcvideo: Add a metadata device node") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250707-uvc-meta-v8-1-ed17f8b1218b@chromium.org Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buffer length check before calling uvc_parse_format() only ensured
that the buffer has at least 3 bytes (buflen > 2), buf the function
accesses buffer[3], requiring at least 4 bytes.
This can lead to an out-of-bounds read if the buffer has exactly 3 bytes.
Fix it by checking that the buffer has at least 4 bytes in
uvc_parse_format().
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: c0efd232929c ("V4L/DVB (8145a): USB Video Class driver") Cc: stable@vger.kernel.org Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250610124107.37360-1-yjjuny.lee@samsung.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When netpoll is enabled, calling pr_warn_once() while holding
kmemleak_lock in mem_pool_alloc() can cause a deadlock due to lock
inversion with the netconsole subsystem. This occurs because
pr_warn_once() may trigger netpoll, which eventually leads to
__alloc_skb() and back into kmemleak code, attempting to reacquire
kmemleak_lock.
Fix this by setting a flag and issuing the pr_warn_once() after
kmemleak_lock is released.
Link: https://lkml.kernel.org/r/20250731-kmemleak_lock-v1-1-728fd470198f@debian.org Fixes: c5665868183f ("mm: kmemleak: use the memory pool for early allocations") Signed-off-by: Breno Leitao <leitao@debian.org> Reported-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A soft lockup warning was observed on a relative small system x86-64
system with 16 GB of memory when running a debug kernel with kmemleak
enabled.
watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]
The test system was running a workload with hot unplug happening in
parallel. Then kemleak decided to disable itself due to its inability to
allocate more kmemleak objects. The debug kernel has its
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.
The soft lockup happened in kmemleak_do_cleanup() when the existing
kmemleak objects were being removed and deleted one-by-one in a loop via a
workqueue. In this particular case, there are at least 40,000 objects
that need to be processed and given the slowness of a debug kernel and the
fact that a raw_spinlock has to be acquired and released in
__delete_object(), it could take a while to properly handle all these
objects.
As kmemleak has been disabled in this case, the object removal and
deletion process can be further optimized as locking isn't really needed.
However, it is probably not worth the effort to optimize for such an edge
case that should rarely happen. So the simple solution is to call
cond_resched() at periodic interval in the iteration loop to avoid soft
lockup.
Link: https://lkml.kernel.org/r/20250728190248.605750-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch.
The current power direction of an USB-C port also influences the
power_supply's online status, so a power role change should also update
the power_supply.
Fixes an issue on some systems where plugging in a normal USB device in
for the first time after a reboot will cause upower to erroneously
consider the system to be connected to AC power.
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2f1 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection") Cc: stable@vger.kernel.org Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250711140143.2105224-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the regmap_write() for software reset in fsl_sai_config_disable would
cause the FSL_SAI_CSR_BCE bit to be cleared. Refer to
commit 197c53c8ecb34 ("ASoC: fsl_sai: Don't disable bitclock for i.MX8MP")
FSL_SAI_CSR_BCE should not be cleared. So need to use regmap_update_bits()
instead of regmap_write() for these bit operations.
Fixes: dc78f7e59169d ("ASoC: fsl_sai: Force a software reset when starting in consumer mode") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/20250807020318.2143219-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dai->probed is used at snd_soc_pcm_dai_probe/remove(),
and used to call real remove() function only when it was probed.
int snd_soc_pcm_dai_probe(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
if (dai->driver->probe) {
(A) int ret = dai->driver->probe(dai);
if (ret < 0)
return soc_dai_ret(dai, ret);
}
=> dai->probed = 1;
}
...
}
int snd_soc_pcm_dai_remove(...)
{
...
for_each_rtd_dais(rtd, i, dai) {
...
=> if (dai->probed &&
...) {
...
}
=> dai->probed = 0;
}
...
}
But on probe() case, we need to check dai->probed before calling
real probe() function at (A), otherwise real probe() might be called
multi times (but real remove() will be called only once).
This patch checks it at probe().
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
Some chip types in the ds1307 driver already have OSF handling to
determine whether .read_time provides valid RTC data or returns -EINVAL.
This change removes the clear of the OSF in .probe as the OSF needs to
be preserved to expand the OSF handling to the ds1341 chip type (note
that DS1341 and DS1342 share a datasheet).
The error occurs on the third attempt to encode extents. When function
ext_tree_prepare_commit() reallocates a larger buffer to retry encoding
extents, the "layoutupdate_pages" page array is initialized only after the
retry loop. But ext_tree_free_commitdata() is called on every iteration
and tries to put pages in the array, thus dereferencing uninitialized
pointers.
An additional problem is that there is no limit on the maximum possible
buffer_size. When there are too many extents, the client may create a
layoutcommit that is larger than the maximum possible RPC size accepted
by the server.
During testing, we observed two typical scenarios. First, one memory page
for extents is enough when we work with small files, append data to the
end of the file, or preallocate extents before writing. But when we fill
a new large file without preallocating, the number of extents can be huge,
and counting the number of written extents in ext_tree_encode_commit()
does not help much. Since this number increases even more between
unlocking and locking of ext_tree, the reallocated buffer may not be
large enough again and again.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250630183537.196479-2-sergeybashirov@gmail.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When there are too many block extents for a layoutcommit, they may not
all fit into the maximum-sized RPC. This patch allows the generic pnfs
code to properly handle -ENOSPC returned by the block/scsi layout driver
and trigger additional layoutcommits if necessary.
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20250630183537.196479-5-sergeybashirov@gmail.com Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At the end of the isect translation, disc_addr represents the physical
disk offset. Thus, end calculated from disk_addr is also a physical disk
offset. Therefore, range checking should be done using map->disk_offset,
not map->start.
Because of integer division, we need to carefully calculate the
disk offset. Consider the example below for a stripe of 6 volumes,
a chunk size of 4096, and an offset of 70000.
In blk_stack_limits(), we check that the t->chunk_sectors value is a
multiple of the t->physical_block_size value.
However, by finding the chunk_sectors value in bytes, we may overflow
the unsigned int which holds chunk_sectors, so change the check to be
based on sectors.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250729091448.1691334-2-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the LAN8710A datasheet (Rev. B, section 3.8.5.1), a hardware
reset is required after power-on, and the reference clock (REF_CLK) must be
established before asserting reset.
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com>
[masahiro: took from Buildroot, adjusted the commit subject] Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The on_treeview2_cursor_changed() handler is connected to both the left
and right tree views, but it hardcodes model2 (the GtkTreeModel of the
right tree view). This is incorrect. Get the associated model from the
view.
During BMC firmware upgrades on live systems, the ipmi_msghandler
generates excessive "BMC returned incorrect response" warnings
while the BMC is temporarily offline. This can flood system logs
in large deployments.
Replace dev_warn() with dev_warn_ratelimited() to throttle these
warnings and prevent log spam during BMC maintenance operations.
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc09e ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd56
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/ Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
This patch fixes an issue where the touchpad cursor movement becomes
slow on the Dell Precision 5560. Force the touchpad freq to 100khz
as a workaround.
Tested on Dell Precision 5560 with 6.14 to 6.14.6. Cursor movement
is now smooth and responsive.
Signed-off-by: fangzhong.zhou <myth5@myth5.com>
[wsa: kept sorting and removed unnecessary parts from commit msg] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
'I3C_BCR_HDR_CAP' is still spec v1.0 and has been renamed to 'advanced
capabilities' in v1.1 onwards. The ST pressure sensor LPS22DF does not
have HDR, but has the 'advanced cap' bit set. The core still wants to
get additional information using the CCC 'GETHDRCAP' (or GETCAPS in v1.1
onwards). Not all controllers support this CCC and will notify the upper
layers about it. For instantiating the device, we can ignore this
unsupported CCC as standard communication will work. Without this patch,
the device will not be instantiated at all.
In using CONFIG_RTC_HCTOSYS, rtc_hctosys() will sync the RTC time to the
kernel time as long as rtc_read_time() succeeds. In some power loss
situations, our supercapacitor-backed DS1342 RTC comes up with either an
unpredictable future time or the default 01/01/00 from the datasheet.
The oscillator stop flag (OSF) is set in these scenarios due to the
power loss and can be used to determine the validity of the RTC data.
This change expands the oscillator stop flag (OSF) handling that has
already been implemented for some chips to the ds1341 chip (DS1341 and
DS1342 share a datasheet). This handling manages the validity of the RTC
data in .read_time and .set_time based on the OSF.
LKP found a random config which failed to build because IO accessors
were not defined:
In file included from drivers/i3c/master.c:21:
drivers/i3c/internals.h: In function 'i3c_writel_fifo':
>> drivers/i3c/internals.h:35:9: error: implicit declaration of function 'writesl' [-Werror=implicit-function-declaration]
Add the proper header to where the IO accessors are used.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507150208.BZDzzJ5E-lkp@intel.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250717120046.9022-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
