Colin Walters [Tue, 9 Nov 2004 06:11:33 +0000 (06:11 +0000)]
2004-11-09 Colin Walters <walters@verbum.org>
* dbus/dbus-string.c (_dbus_string_get_length): New
function, writes DBusString to C buffer.
* dbus/dbus-string.h: Prototype it.
* dbus/dbus-message.c (dbus_message_type_to_string): New
function, converts message type into C string.
* dbus/dbus-message.h: Prototype it.
* bus/selinux.c (bus_selinux_check): Take source pid,
target pid, and audit data. Pass audit data to
avc_has_perm.
(log_audit_callback): New function, appends extra
audit information.
(bus_selinux_allows_acquire_service): Also take
service name, add it to audit data.
(bus_selinux_allows_send): Also take message
type, interface, method member, error name,
and destination, and add them to audit data.
(log_cb): Initialize func_audit.
Colin Walters [Sun, 7 Nov 2004 17:05:19 +0000 (17:05 +0000)]
2004-11-07 Colin Walters <walters@verbum.org>
* bus/bus.c (load_config): Break into three
separate functions: process_config_first_time_only,
process_config_every_time, and process_config_postinit.
(process_config_every_time): Move call of
bus_registry_set_service_context_table into
process_config_postinit.
(process_config_postinit): New function, does
any processing that needs to happen late
in initialization (and also on reload).
(bus_context_new): Instead of calling load_config,
open config parser here and call process_config_first_time_only
and process_config_every_time directly. Later, after
we have forked but before changing UID,
invoke bus_selinux_full_init, and then call
process_config_postinit.
(bus_context_reload_config): As in bus_context_new,
load parse file inside here, and call process_config_every_time
and process_config_postinit.
* bus/services.h, bus/services.c
(bus_registry_set_service_context_table): Rename
from bus_registry_set_sid_table. Take string hash from config
parser, and convert them here into SIDs.
* bus/config-parser.c (struct BusConfigParser): Have
config parser only store a mapping of service->context
string.
(merge_service_context_hash): New function.
(merge_included): Merge context string hashes instead
of using bus_selinux_id_table_union.
(bus_config_parser_new): Don't use bus_selinux_id_table_new;
simply create a new string hash.
(bus_config_parser_unref): Unref it.
(start_selinux_child): Simply insert strings into hash,
don't call bus_selinux_id_table_copy_over.
Colin Walters [Tue, 2 Nov 2004 20:27:48 +0000 (20:27 +0000)]
2004-11-02 Colin Walters <walters@verbum.org>
* bus/selinux.c (bus_selinux_init): Split into two functions,
bus_selinux_pre_init and bus_selinux_post_init.
(bus_selinux_pre_init): Just determine whether SELinux is
enabled.
(bus_selinux_post_init): Do everything else.
* bus/main.c (main): Call bus_selinux_pre_init before parsing
config file, and bus_selinux_post_init after. This ensures that
we don't lose the policyreload notification thread that
bus_selinux_init created before forking previously.
* bus/test-main.c (test_pre_hook): Update for split.
Colin Walters [Fri, 29 Oct 2004 18:50:29 +0000 (18:50 +0000)]
2004-10-29 Colin Walters <walters@redhat.com>
* tools/dbus-monitor.c (filter_func): Return
DBUS_HANDLER_RESULT_HANDLED in filter function
for now. See:
http://freedesktop.org/pipermail/dbus/2004-August/001433.html
Joe Shaw [Wed, 27 Oct 2004 22:35:03 +0000 (22:35 +0000)]
2004-10-27 Joe Shaw <joeshaw@novell.com>
* mono/Arguments.cs (GetDBusTypeConstructor):
type.UnderlyingSystemType will return "System.Byte" if you do it
on "byte[]", which is not what we want. So check the type.IsArray
property and use System.Array instead.
* dbus/dbus-sysdeps.c (fill_user_info): On errors do not free
the DBusUserInfo structure since this is passed into the function.
This would cause a double free when the function that allocated
the structure would try to free it when an error occured.
* (bus/session.conf.in, bus/Makefile.am, dbus/configure.in):
use /usr/share/dbus-1/services instead of /usr/lib/dbus-1.0/services
for service activation to avoid 32bit/64bit parallel install issues
Colin Walters [Fri, 22 Oct 2004 02:07:29 +0000 (02:07 +0000)]
2004-10-21 Colin Walters <walters@verbum.org>
* dbus/dbus-transport-unix.c (do_authentication): Return
authentication status to callers.
(unix_handle_watch): If we completed authentication this round,
don't do another read. Instead wait until the next iteration,
after we've read any pending data in the auth buffer.
(unix_do_iteration): Ditto.
(unix_handle_watch): Updated for new do_authentication prototype.
Jon Trowbridge [Wed, 29 Sep 2004 01:46:45 +0000 (01:46 +0000)]
2004-09-28 Jon Trowbridge <trow@ximian.com>
* mono/BusDriver.cs: Changed BusDriver struct to remove
the ServiceCreated and ServiceDeleted events and replace them
with the new ServiceOwnerChanged event.
* mono/example/BusListener.cs: Added a new example program,
which listens for and reports any ServiceOwnerChanged events
on the bus driver.
* mono/example/Makefile.am (DESTDIR): Build changes for the
new BusListener.cs example.
* dbus/dbus-sysdeps.c (_dbus_user_at_console): fix memleak in OOM.
* doc/busconfig.dtd: update the DTD for the at_console attribute.
* bus/driver.c (bus_driver_handle_hello): correctly handle Hello
messages after the first one (bug #1389).
* bus/dispatch.c (check_double_hello_message): add a test case for the
double hello message bug. (check_existent_service_activation): fix
check of spawning error.
Jon Trowbridge [Tue, 31 Aug 2004 03:59:14 +0000 (03:59 +0000)]
2004-08-30 Jon Trowbridge <trow@ximian.com>
* mono/BusDriver.cs: Added. This is a class for interacting with
the org.freedesktop.DBus service.
* mono/Message.cs: Added a mechanism to expose the message that is
currently being dispatched via the static Message.Current
property. Added Message.Sender and Message.Destination
properties.
* mono/Handler.cs: Expose the dispatched message via
Message.Current when handling method calls.
* mono/Service.cs: Expose the dispatched message via
Message.Current when handling signal emissions.
* mono/Connection.cs: Bind dbus_bus_get_base_service via the
Connection.BaseService property.
Jon Trowbridge [Thu, 26 Aug 2004 17:26:06 +0000 (17:26 +0000)]
2004-08-26 Jon Trowbridge <trow@ximian.com>
* bus/driver.c (bus_driver_handle_service_exists): Respond with
TRUE if we are inquiring about the existence of the built-in
org.freedesktop.DBus service.
* bus/config-parser.c:
(struct PolicyType): Add POLICY_CONSOLE
(struct Element.d.policy): s/gid_or_uid/gid_uid_or_at_console
(start_busconfig_child): Sets up console element when
<policy at_console=""> is encountered in a policy file
(append_rule_from_element): Convert console elements to console
rules.
* bus/policy.c:
(bus_policy_create_client_policy): Add console rules to the client
policy based on if the client is at the console
(bus_policy_append_console_rule): New function for adding a
console rule to a policy
(bus_policy_merge): Handle console rule merging
* dbus/dbus-sysdeps.h: Added the DBUS_CONSOLE_DIR constant
where we check for console user files
* dbus/dbus-sysdeps.c:
(_dbus_file_exists): New function which checks if the given
file exists
(_dbus_user_at_console): New function which does the system
specific process of checking if the user is at the console
* dbus/dbus-userdb.c:
(_dbus_is_console_user): New function converts a UID to user name
and then calls the system specific _dbus_user_at_console to
see if the user is at the console and therefor a console user
Olivier Andrieu [Wed, 25 Aug 2004 08:03:12 +0000 (08:03 +0000)]
* bus/config-parser.c (set_limit):
* bus/dbus-daemon-1.1.in:
* test/data/valid-config-files/many-rules.conf: set the
max_match_rules_per_connection limt from the config file.
* bus/selinux.c: Create a thread for policy reload notification.
(bus_selinux_get_policy_root): Implement.
Updated SELinux support from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/config-parser.c (start_busconfig_child)
(bus_config_parser_content): Support SELinux-root relative
inclusion.
* configure.in <HAVE_SELINUX>: Add -lpthread.
* bus/test-main.c (test_pre_hook, test_post_hook): New.
(test_post_hook): Move memory checking into here.
(test_pre_hook, test_post_hook): Move SELinux checks in
here, but conditional on a DBUS_TEST_SELINUX environment
variable. Unfortunately we can't run the SELinux checks
as a normal user, since they won't have any permissions
for /selinux. So this will have to be tested manually
for now, until we have virtualization for most of
libselinux.
SELinux support from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/selinux.c, bus/selinux.h: new file encapsulating selinux
functionality
* configure.in: add --enable-selinux
* bus/policy.c (bus_policy_merge): add FIXME to a comment
* bus/main.c (main): initialize and shut down selinux
* bus/connection.c: store SELinux ID on each connection, to avoid
repeated getting of the string context and converting it into
an ID
* bus/bus.c (bus_context_get_policy): new accessor, though it
isn't used
(bus_context_check_security_policy): check whether the security
context of sender connection can send to the security context of
recipient connection
* bus/config-parser.c: add parsing for <selinux> and <associate>
* dbus/dbus-transport.c (_dbus_transport_get_unix_fd): to
implement dbus_connection_get_unix_fd()
* dbus/dbus-connection.c (dbus_connection_get_unix_fd): new
function, used by the selinux stuff
* bus/config-loader-libxml.c: complete the implementation of libxml
backend for config file loader. Doesn't work with full OOM test yet.
* configure.in: change error when selecting libxml into a warning.
* test/data/invalid-config-files: add two non-well-formed XML files.
* glib/Makefile.am: libdbus_gtool always uses expat, not libxml.
* dbus/dbus-transport-unix.c (unix_handle_watch): do not disconnect in
case of DBUS_WATCH_HANGUP, several do_reading() may be necessary to
read all the buffer. (bug #894)
* bus/activation.c (bus_activation_activate_service): fix a potential
assertion failure (bug #896). Small optimization in the case of
auto-activation messages.
* dbus/dbus-message.c (verify_test_message, _dbus_message_test): add
test case for byte-through-vararg bug (#901). patch by Kimmo
Hämäläinen.
* dbus/dbus-sysdeps.c (fill_user_info): fix inexistent label name,
breaking build on Solaris, reported by Farhad Saberi on the ML.
* dbus/dbus-message.c (dbus_message_append_args_valist): fix the
va_arg invocation to account for integer promotion in the case of
DBUS_TYPE_BYTE (unsigned char is promoted to int). (bug #901)
* bus/services.c (bus_service_remove_owner): fix bug #902, use
_dbus_list_get_first_link, not _dbus_list_get_first.
* dbus/dbus-bus.c (dbus_bus_service_exists): plug a memory leak.
* dbus/dbus-object-tree.c (free_subtree_recurse): always null
handler functions so that the asserts in _dbus_object_subtree_unref
do not fail.
* dbus/dbus-transport-unix.c (do_reading):
_dbus_transport_queue_messages return value is of type
dbus_bool_t, not DBusDispatchStatus.
* bus/dispatch.c:
(check_get_connection_unix_user): Debug says GetProperty; but the
method is called GetConnectionUnixUser
(check_get_connection_unix_process_id): New function
(bus_dispatch_test): Actually call check_get_connection_unix_user();
also call check_get_connection_unix_process_id()
* bus/driver.c:
(bus_driver_handle_get_connection_unix_process_id): New function,
handles GetConnectionUnixProcessID on the org.freedesktop.DBus
interface
* dbus/dbus-auth.c:
(handle_server_data_external_mech): Set pid from the credentials
obtained from the socket
* dbus/dbus-connection.c:
(dbus_connection_get_unix_process_id): New function
* dbus/dbus-connection.h:
Add prototype for dbus_connection_get_unix_process_id
* dbus/dbus-transport.c:
(_dbus_transport_get_unix_process_id): New function
* dbus/dbus-transport.h:
Add prototype for _dbus_transport_get_unix_process_id
Add message argument to the default object_method_handler
function.
* python/dbus_bindings.pyx.in:
Automatically return NIL when passed an empty list
(we can't pass back a list since lists are typed
and we don't have any idea what type the the client
intended the list to be... :-( )
Add "message" argument to service-side dbus.Object
methods. This will break existing services written
using the python bindings, but will allow extraction
of all the message information (e.g. who its from).
Add improved "object oriented" signal handling/emission.
Havoc Pennington [Sun, 20 Jun 2004 15:28:15 +0000 (15:28 +0000)]
2004-06-20 Havoc Pennington <hp@redhat.com>
* dbus/dbus-glib-error-enum.h: autogenerate the GError enum
codes from the dbus error names
* glib/dbus-glib.h: move to subdir dbus/ since it's included
as dbus/dbus-glib.h and that breakage is now visible due to
including dbus/dbus-glib.h in dbus-glib-lowlevel.h
* glib/dbus-glib.h: s/gproxy/g_proxy/
* dbus/dbus-shared.h: new header to hold stuff shared with
binding APIs
* dbus/dbus-protocol.h (DBUS_ERROR_*): move errors here rather
than dbus-errors.h
* glib/dbus-glib.h (dbus_set_g_error): move to
dbus-glib-lowlevel.h
* glib/dbus-glib.h: remove dbus/dbus.h from here; change a bunch
of stuff to enable this
* dbus/dbus-glib-lowlevel.h: put dbus/dbus.h here
* a bunch of other changes with the same basic "separate glib
bindings from dbus.h" theme
* dbus/dbus-message-builder.c (_dbus_message_data_load): append
random signature when using REQUIRED_FIELDS (this hack won't work
in the long term)
* dbus/dbus-message.c: change the signature to be a header field,
instead of message->signature special-case string. Incremental
step forward. Then we can fix up code to send the signature in the
message, then fix up code to validate said signature, then fix up
code to not put the typecodes inline, etc.
(load_one_message): don't make up the signature after the fact
(decode_header_data): require signature field for the known
message types
* dbus/dbus-marshal.c (_dbus_marshal_string_len): new
* dbus/dbus-connection.h, dbus/dbus-connection.c: have object path
registration functions take the path argument as char* instead of
char**.
* dbus/dbus-marshal.h, dbus/dbus-marshal.c (_dbus_decompose_path):
split off the path decompostion part of
_dbus_demarshal_object_path. Some misc. fixes to silence compiler
warnings.
* dbus/dbus-auth.c: Rewrite auth protocol handling to use a state
machine approach. A state is implemented as a function that
handles incoming events as specified for that state.
* doc/dbus-specification.xml: Update auth protocol state machine
specification to match implementation. Remove some leftover
base64 examples.
* dbus/dbus-object-tree.c
(_dbus_object_tree_dispatch_and_unlock): fix dispatch for
non-fallback handlers (bug #684).
(_dbus_object_subtree_new): initialize invoke_as_fallback field.
(find_subtree_recurse): report wether the returned subtree is an
exact match or a "fallback" match higher up in the tree.
(object_tree_test_iteration): update test case.
projects / thirdparty / dbus.git / log
