Without such counters, it is difficult to easily debug issues with MPJ
not having the backup flags on production servers.
This is not strictly a fix, but it eases to validate the following
patches without requiring to take packet traces, to query ongoing
connections with Netlink with admin permissions, or to guess by looking
at the behaviour of the packet scheduler. Also, the modification is self
contained, isolated, well controlled, and the increments are done just
after others, there from the beginning. It looks then safe, and helpful
to backport this.
Currently the per connection announced address counter is never
decreased. As a consequence, after connection establishment, if
the NL PM deletes an endpoint and adds a new/different one, no
additional subflow is created for the new endpoint even if the
current limits allow that.
Address the issue properly updating the signaled address counter
every time the NL PM removes such addresses.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow
as 'backup' by setting the flag with the same name. Before this patch,
the backup was set if the other peer set it in its MP_JOIN + SYN
request.
It is not correct: the backup flag should be set in the MPJ+SYN+ACK only
if the host asks for it, and not mirroring what was done by the other
peer. It is then required to have a dedicated bit for each direction,
similar to what is done in the subflow context.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the per-connection announced address counter is never
decreased. When the user-space PM is in use, this just affect
the information exposed via diag/sockopt, but it could still foul
the PM to wrong decision.
Add the missing accounting for the user-space PM's sake.
Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.
A run with PROVE_LOCKING enabled detected the issue:
[ BUG: Invalid wait context ]
... c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
other info that might help us debug this:
context-{4:4}
2 locks held by ifconfig/146:
#0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
#1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98
Avoid the spinlock usage and convert carrier_lock to a mutex.
It could lead to error happen because the variable res is not updated if
the call to sr_share_read_word returns an error. In this particular case
error code was returned and res stayed uninitialized. Same issue also
applies to sr_read_reg.
This can be avoided by checking the return value of sr_share_read_word
and sr_read_reg, and propagating the error if the read operation failed.
Found by code review.
Cc: stable@vger.kernel.org Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Shigeru Yoshida <syoshida@redhat.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This refresh statement was originally present in the original patch:
https://lore.kernel.org/netdev/20221121191437.996297-2-shr@devkernel.io/
It has been removed with no explanation in v6:
https://lore.kernel.org/netdev/20230201222254.744422-2-shr@devkernel.io/
It is important to make the refresh for multishot requests, because if no
new requests using the same NAPI device are added to the ring, the entry
will become stale and be removed silently. The unsuspecting user will
not know that their ring had busy polling for only 60 seconds before
being pruned.
In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel
with chanctx emulation") I changed mac80211 to always have an
internal monitor_sdata to have something to have the chanctx
bound to.
However, if the driver didn't also have the WANT_MONITOR flag
this would cause mac80211 to allocate it without telling the
driver (which was intentional) but also use it for later APIs
to the driver without it ever having known about it which was
_not_ intentional.
Check through the code and only use the monitor_sdata in the
relevant places (TX, MU-MIMO follow settings, TX power, and
interface iteration) when the WANT_MONITOR flag is set.
The ext interrupts are enabled when the firmware has been started, but
this may never happen, for example, if the board configuration file is
missing.
When the system is later suspended, the driver unconditionally tries to
disable interrupts, which results in an irq disable imbalance and causes
the driver to spin indefinitely in napi_synchronize().
Make sure that the interrupts have been enabled before attempting to
disable them.
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a buffer is evicted for memory pressure or TTM evict all,
the placement is set to the eviction domain, this means the
buffer never gets revalidated on the next exec to the correct domain.
I think this should be fine to use the initial domain from the
object creation, as least with VM_BIND this won't change after
init so this should be the correct answer.
DISCOVERY_FINDING shall only be set for active scanning as passive
scanning is not meant to generate MGMT Device Found events causing
discovering state to go out of sync since userspace would believe it
is discovering when in fact it is just passive scanning.
Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088 Fixes: 2e2515c1ba38 ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fetching of userspace memory fails during the main loop, all drm sync
objs looked up until that point will be leaked because of the missing
drm_syncobj_put.
Fix it by exporting and using a common cleanup helper.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: bae7cb5d6800 ("drm/v3d: Create a CPU job extension for the reset performance query job") Cc: Maíra Canal <mcanal@igalia.com> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: stable@vger.kernel.org # v6.8+ Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711135340.84617-4-tursulin@igalia.com
(cherry picked from commit 484de39fa5f5b7bd0c5f2e2c5265167250ef7501) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fetching of userspace memory fails during the main loop, all drm sync
objs looked up until that point will be leaked because of the missing
drm_syncobj_put.
Fix it by exporting and using a common cleanup helper.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: 9ba0ff3e083f ("drm/v3d: Create a CPU job extension for the timestamp query job") Cc: Maíra Canal <mcanal@igalia.com> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: stable@vger.kernel.org # v6.8+ Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711135340.84617-3-tursulin@igalia.com
(cherry picked from commit 753ce4fea62182c77e1691ab4f9022008f25b62e) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check that the number of perfmons userspace is passing in the copy and
reset extensions is not greater than the internal kernel storage where
the ids will be copied into.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: bae7cb5d6800 ("drm/v3d: Create a CPU job extension for the reset performance query job") Cc: Maíra Canal <mcanal@igalia.com> Cc: Iago Toral Quiroga <itoral@igalia.com> Cc: stable@vger.kernel.org # v6.8+ Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240711135340.84617-2-tursulin@igalia.com
(cherry picked from commit f32b5128d2c440368b5bf3a7a356823e235caabb) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.
Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 82d354370189 ("drm/i915/skl: Implementation of SKL DPLL programming") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru
(cherry picked from commit 833cf12846aa19adf9b76bc79c40747726f3c0c1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suspend will disable pcie device. Thus, resume should do full hw
initialization again.
Add some APIs to ast_drm_thaw() before ast_post_gpu() to fix the issue.
v2:
- fix function-call arguments
Fixes: 5b71707dd13c ("drm/ast: Enable and unlock device access early during init") Reported-by: Cary Garrett <cogarre@gmail.com> Closes: https://lore.kernel.org/dri-devel/8ce1e1cc351153a890b65e62fed93b54ccd43f6a.camel@gmail.com/ Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240718030352.654155-1-jammy_huang@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Power up the ASTDP connector for connection status detection if the
connector is not active. Keep it powered if a display is attached.
This fixes a bug where the connector does not come back after
disconnecting the display. The encoder's atomic_disable turns off
power on the physical connector. Further HPD reads will fail,
thus preventing the driver from detecting re-connected displays.
For connectors that are actively used, only test the HPD flag without
touching power.
Fixes: f81bb0ac7872 ("drm/ast: report connection status on Display Port.") Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240717143319.104012-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dumb buffers can be used in kms but also through prime with gallium's
resource_from_handle. In the second case the dumb buffers can be
rendered by the GPU where with the regular DRM kms interfaces they
are mapped and written to by the CPU. Because the same buffer can
be written to by the GPU and CPU vmwgfx needs to use vmw_surface (object
which properly tracks dirty state of the guest and gpu memory)
instead of vmw_bo (which is just guest side memory).
Furthermore the dumb buffer handles are expected to be gem objects by
a lot of userspace.
Make vmwgfx accept gem handles in prime and kms but internally switch
to vmw_surface's to properly track the dirty state of the objects between
the GPU and CPU.
Introduce a version of the fence ops that on release doesn't remove
the fence from the pending list, and thus doesn't require a lock to
fix poll->fence wait->fence unref deadlocks.
vmwgfx overwrites the wait callback to iterate over the list of all
fences and update their status, to do that it holds a lock to prevent
the list modifcations from other threads. The fence destroy callback
both deletes the fence and removes it from the list of pending
fences, for which it holds a lock.
dma buf polling cb unrefs a fence after it's been signaled: so the poll
calls the wait, which signals the fences, which are being destroyed.
The destruction tries to acquire the lock on the pending fences list
which it can never get because it's held by the wait from which it
was called.
Old bug, but not a lot of userspace apps were using dma-buf polling
interfaces. Fix those, in particular this fixes KDE stalls/deadlock.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Fixes: 2298e804e96e ("drm/vmwgfx: rework to new fence interface, v2") Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.2+ Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722184313.181318-2-zack.rusin@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs "attention" file normally controls the Slot Control Attention
Indicator with 0 (off), 1 (on), 2 (blink) settings.
576243b3f9ea ("PCI: pciehp: Allow exclusive userspace control of
indicators") added pciehp_set_raw_indicator_status() to allow userspace to
directly control all four bits in both the Attention Indicator and the
Power Indicator fields via the "attention" file.
This is used on Intel VMD bridges so utilities like "ledmon" can use sysfs
"attention" to control up to 16 indicators for NVMe device RAID status.
abaaac4845a0 ("PCI: hotplug: Use FIELD_GET/PREP()") broke this by masking
the sysfs data with PCI_EXP_SLTCTL_AIC, which discards the upper two bits
intended for the Power Indicator Control field (PCI_EXP_SLTCTL_PIC).
For NVMe devices behind an Intel VMD, ledmon settings that use the
PCI_EXP_SLTCTL_PIC bits, i.e., ATTENTION_REBUILD (0x5), ATTENTION_LOCATE
(0x7), ATTENTION_FAILURE (0xD), ATTENTION_OFF (0xF), no longer worked
correctly.
Mask with PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC to retain both the
Attention Indicator and the Power Indicator bits.
Commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event
in process context") removed the process context workqueue from
amdtp_domain_stream_pcm_pointer() and update_pcm_pointers() to remove
its overhead.
With RME Fireface 800, this lead to a regression since
Kernels 5.14.0, causing an AB/BA deadlock competition for the
substream lock with eventual system freeze under ALSA operation:
thread 0:
* (lock A) acquire substream lock by
snd_pcm_stream_lock_irq() in
snd_pcm_status64()
* (lock B) wait for tasklet to finish by calling
tasklet_unlock_spin_wait() in
tasklet_disable_in_atomic() in
ohci_flush_iso_completions() of ohci.c
thread 1:
* (lock B) enter tasklet
* (lock A) attempt to acquire substream lock,
waiting for it to be released:
snd_pcm_stream_lock_irqsave() in
snd_pcm_period_elapsed() in
update_pcm_pointers() in
process_ctx_payloads() in
process_rx_packets() of amdtp-stream.c
Restore the process context work queue to prevent deadlock
AB/BA deadlock competition for ALSA substream lock of
snd_pcm_stream_lock_irq() in snd_pcm_status64()
and snd_pcm_stream_lock_irqsave() in snd_pcm_period_elapsed().
revert commit 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period
elapse event in process context")
Replace inline description to prevent future deadlock.
Cc: stable@vger.kernel.org Fixes: 7ba5ca32fe6e ("ALSA: firewire-lib: operate for period elapse event in process context") Reported-by: edmund.raile <edmund.raile@proton.me> Closes: https://lore.kernel.org/r/kwryofzdmjvzkuw6j3clftsxmoolynljztxqwg76hzeo4simnl@jn3eo7pe642q/ Signed-off-by: Edmund Raile <edmund.raile@protonmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240730195318.869840-3-edmund.raile@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current conversion from the legacy SysEx event to UMP SysEx packet
in the sequencer core has a couple of issues:
* The first packet trims the SysEx start byte (0xf0), hence it
contains only 5 bytes instead of 6. This isn't wrong, per
specification, but it's strange not to fill 6 bytes.
* When the SysEx end marker (0xf7) is placed at the first byte of the
next packet, it'll end up with an empty data just with the END
status. It can be rather folded into the previous packet with the
END status.
This patch tries to address those issues. The first packet may have 6
bytes even with the SysEx start, and an empty packet with the SysEx
end marker is omitted.
USB-audio driver puts SNDRV_CHMAP_SL and _SR as left and right
surround channels for UAC1 channel map, respectively. But they should
have been SNDRV_CHMAP_RL and _RR; the current value *_SL and _SR are
rather "side" channels, not "surround". I guess I took those
mistakenly when I read the spec mentioning "surround left".
This patch corrects those entries to be the right channels.
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Before this patch, the scheduler was only looking at the 'backup' flag.
That can make sense in some cases, but it looks like that's not what we
wanted for the general use, because either the path-manager was setting
both of them when sending an MP_PRIO, or the receiver was duplicating
the 'backup' flag in the subflow request.
Note that the use of these two flags in the path-manager are going to be
fixed in the next commits, but this change here is needed not to modify
the behaviour.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
both callers have verified that fd is not greater than ->max_fds;
however, misprediction might end up with
tofree = fdt->fd[fd];
being speculatively executed. That's wrong for the same reasons
why it's wrong in close_fd()/file_close_fd_locked(); the same
solution applies - array_index_nospec(fd, fdt->max_fds) could differ
from fd only in case of speculative execution on mispredicted path.
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The btrfs buffered write path runs through __extent_writepage() which
has some tricky return value handling for writepage_delalloc().
Specifically, when that returns 1, we exit, but for other return values
we continue and end up calling btrfs_folio_end_all_writers(). If the
folio has been unlocked (note that we check the PageLocked bit at the
start of __extent_writepage()), this results in an assert panic like
this one from syzbot:
I was hitting the same issue by doing hundreds of accelerated runs of
generic/475, which also hits IO errors by design.
I instrumented that reproducer with bpftrace and found that the
undesirable folio_unlock was coming from the following callstack:
folio_unlock+5
__process_pages_contig+475
cow_file_range_inline.constprop.0+230
cow_file_range+803
btrfs_run_delalloc_range+566
writepage_delalloc+332
__extent_writepage # inlined in my stacktrace, but I added it here
extent_write_cache_pages+622
Looking at the bisected-to patch in the syzbot report, Josef realized
that the logic of the cow_file_range_inline error path subtly changing.
In the past, on error, it jumped to out_unlock in cow_file_range(),
which honors the locked_page, so when we ultimately call
folio_end_all_writers(), the folio of interest is still locked. After
the change, we always unlocked ignoring the locked_page, on both success
and error. On the success path, this all results in returning 1 to
__extent_writepage(), which skips the folio_end_all_writers() call,
which makes it OK to have unlocked.
Fix the bug by wiring the locked_page into cow_file_range_inline() and
only setting locked_page to NULL on success.
Reported-by: syzbot+a14d8ac9af3a2a4fd0c8@syzkaller.appspotmail.com Fixes: 0586d0a89e77 ("btrfs: move extent bit and page cleanup into cow_file_range_inline") CC: stable@vger.kernel.org # 6.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The block group's avail bytes printed when dumping a space info subtract
the delalloc_bytes. However, as shown in btrfs_add_reserved_bytes() and
btrfs_free_reserved_bytes(), it is added or subtracted along with
"reserved" for the delalloc case, which means the "delalloc_bytes" is a
part of the "reserved" bytes. So, excluding it to calculate the avail space
counts delalloc_bytes twice, which can lead to an invalid result.
Fixes: e50b122b832b ("btrfs: print available space for a block group when dumping a space info") CC: stable@vger.kernel.org # 6.6+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When btrfs makes a block group read-only, it adds all free regions in the
block group to space_info->bytes_readonly. That free space excludes
reserved and pinned regions. OTOH, when btrfs makes the block group
read-write again, it moves all the unused regions into the block group's
zone_unusable. That unused region includes reserved and pinned regions.
As a result, it counts too much zone_unusable bytes.
Fortunately (or unfortunately), having erroneous zone_unusable does not
affect the calculation of space_info->bytes_readonly, because free
space (num_bytes in btrfs_dec_block_group_ro) calculation is done based on
the erroneous zone_unusable and it reduces the num_bytes just to cancel the
error.
This behavior can be easily discovered by adding a WARN_ON to check e.g,
"bg->pinned > 0" in btrfs_dec_block_group_ro(), and running fstests test
case like btrfs/282.
Fix it by properly considering pinned and reserved in
btrfs_dec_block_group_ro(). Also, add a WARN_ON and introduce
btrfs_space_info_update_bytes_zone_unusable() to catch a similar mistake.
Fixes: 169e0da91a21 ("btrfs: zoned: track unusable bytes for zones") CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pen ID, 0x80842, was not the correct ID for wacom driver to
treat. The ID was corrected to 0x8842.
Also, 0x4200 was not the expected ID used on any Wacom device.
Therefore, 0x4200 was removed.
The cros_ec_get_host_command_version_mask() function requires that the
caller must have ec_dev->lock mutex before calling it. This requirement
was not met and as a result it was possible that two commands were sent
to the device at the same time.
The problem was observed while using UART backend which doesn't use any
additional locks, unlike SPI backend which locks the controller until
response is received.
If a client sends out a cap update dropping caps with the prior 'seq'
just before an incoming cap revoke request, then the client may drop
the revoke because it believes it's already released the requested
capabilities.
This causes the MDS to wait indefinitely for the client to respond
to the revoke. It's therefore always a good idea to ack the cap
revoke request with the bumped up 'seq'.
Currently if the cap->issued equals to the newcaps the check_caps()
will do nothing, we should force flush the caps.
When using the shadow call stack sanitizer, all code must be compiled
with the -ffixed-x18 flag, but this flag is not currently being passed
to Rust. This results in crashes that are extremely difficult to debug.
To ensure that nobody else has to go through the same debugging session
that I had to, prevent configurations that enable both SHADOW_CALL_STACK
and RUST.
It is rather common for people to backport 724a75ac9542 ("arm64: rust:
Enable Rust support for AArch64"), so I recommend applying this fix all
the way back to 6.1.
Cc: stable@vger.kernel.org # 6.1 and later Fixes: 724a75ac9542 ("arm64: rust: Enable Rust support for AArch64") Signed-off-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20240729-shadow-call-stack-v4-1-2a664b082ea4@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although the Arm architecture permits concurrent modification and
execution of NOP and branch instructions, it still requires some
synchronisation to ensure that other CPUs consistently execute the newly
written instruction:
> When the modified instructions are observable, each PE that is
> executing the modified instructions must execute an ISB or perform a
> context synchronizing event to ensure execution of the modified
> instructions
Prior to commit f6cc0c501649 ("arm64: Avoid calling stop_machine() when
patching jump labels"), the arm64 jump_label patching machinery
performed synchronisation using stop_machine() after each modification,
however this was problematic when flipping static keys from atomic
contexts (namely, the arm_arch_timer CPU hotplug startup notifier) and
so we switched to the _nosync() patching routines to avoid "scheduling
while atomic" BUG()s during boot.
In hindsight, the analysis of the issue in f6cc0c501649 isn't quite
right: it cites the use of IPIs in the default patching routines as the
cause of the lockup, whereas stop_machine() does not rely on IPIs and
the I-cache invalidation is performed using __flush_icache_range(),
which elides the call to kick_all_cpus_sync(). In fact, the blocking
wait for other CPUs is what triggers the BUG() and the problem remains
even after f6cc0c501649, for example because we could block on the
jump_label_mutex. Eventually, the arm_arch_timer driver was fixed to
avoid the static key entirely in commit a862fc2254bd
("clocksource/arm_arch_timer: Remove use of workaround static key").
This all leaves the jump_label patching code in a funny situation on
arm64 as we do not synchronise with other CPUs to reduce the likelihood
of a bug which no longer exists. Consequently, toggling a static key on
one CPU cannot be assumed to take effect on other CPUs, leading to
potential issues, for example with missing preempt notifiers.
Rather than revert f6cc0c501649 and go back to stop_machine() for each
patch site, implement arch_jump_label_transform_apply() and kick all
the other CPUs with an IPI at the end of patching.
Cc: Alexander Potapenko <glider@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Fixes: f6cc0c501649 ("arm64: Avoid calling stop_machine() when patching jump labels") Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240731133601.3073-1-will@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The RISC-V kernel already has checks to ensure that memory which would
lie outside of the linear mapping is not used. However those checks
use memory_limit, which is used to implement the mem= kernel command
line option (to limit the total amount of memory, not its address
range). When memory is made up of two or more non-contiguous memory
banks this check is incorrect.
Two changes are made here:
- add a call in setup_bootmem() to memblock_cap_memory_range() which
will cause any memory which falls outside the linear mapping to be
removed from the memory regions.
- remove the check in create_linear_mapping_page_table() which was
intended to remove memory which is outside the liner mapping based
on memory_limit, as it is no longer needed. Note a check for
mapping more memory than memory_limit (to implement mem=) is
unnecessary because of the existing call to
memblock_enforce_memory_limit().
This issue was seen when booting on a SV39 platform with two memory
banks:
0x00,80000000 1GiB
0x20,00000000 32GiB
This memory range is 158GiB from top to bottom, but the linear mapping
is limited to 128GiB, so the lower block of RAM will be mapped at
PAGE_OFFSET, and the upper block straddles the top of the linear
mapping.
The problem is that memblock (unaware that some physical memory cannot
be used) has allocated memory from the top of memory but which is
outside the linear mapping region.
Signed-off-by: Stuart Menefy <stuart.menefy@codasip.com> Fixes: c99127c45248 ("riscv: Make sure the linear mapping does not use the kernel mapping") Reviewed-by: David McKay <david.mckay@codasip.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240622114217.2158495-1-stuart.menefy@codasip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sometimes the hotplug cpu stalls at the arch_cpu_idle() for a while after
workqueue_online_cpu(). When cpu stalls at the idle loop, the reschedule
IPI is pending. However the enable bit is not enabled yet so the cpu stalls
at WFI until watchdog timeout. Therefore enable the IPI before the
workqueue_online_cpu() to fix the issue.
Fixes: 63c5484e7495 ("workqueue: Add multiple affinity scopes and interface to select them") Signed-off-by: Nick Hu <nick.hu@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20240717031714.1946036-1-nick.hu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is required to check event type before checking event config.
Events with the different types can have the same config.
This check is missed for legacy mode code
For such perf usage:
sysctl -w kernel.perf_user_access=2
perf stat -e cycles,L1-dcache-loads --
driver will try to force both events to CYCLE counter.
This commit implements event type check before forcing
events on the special counters.
Currently, the RISC-V firmware JSON file has duplicate event name
"FW_SFENCE_VMA_RECEIVED". According to the RISC-V SBI PMU extension[1],
the event name should be "FW_SFENCE_VMA_ASID_SENT".
Before this patch:
$ perf list
firmware:
fw_access_load
[Load access trap event. Unit: cpu]
fw_access_store
[Store access trap event. Unit: cpu]
....
fw_set_timer
[Set timer event. Unit: cpu]
fw_sfence_vma_asid_received
[Received SFENCE.VMA with ASID request from other HART event. Unit: cpu]
fw_sfence_vma_received
[Sent SFENCE.VMA with ASID request to other HART event. Unit: cpu]
After this patch:
$ perf list
firmware:
fw_access_load
[Load access trap event. Unit: cpu]
fw_access_store
[Store access trap event. Unit: cpu]
.....
fw_set_timer
[Set timer event. Unit: cpu]
fw_sfence_vma_asid_received
[Received SFENCE.VMA with ASID request from other HART event. Unit: cpu]
fw_sfence_vma_asid_sent
[Sent SFENCE.VMA with ASID request to other HART event. Unit: cpu]
fw_sfence_vma_received
[Received SFENCE.VMA request from other HART event. Unit: cpu]
When alignment handling is delegated to the kernel, everything must be
word-aligned in purgatory, since the trap handler is then set to the
kexec one. Without the alignment, hitting the exception would
ultimately crash. On other occasions, the kernel's handler would take
care of exceptions.
This has been tested on a JH7110 SoC with oreboot and its SBI delegating
unaligned access exceptions and the kernel configured to handle them.
The current logic only works if the PIO is between two
other ND user options. This fixes it so that the PIO
can also be either before or after other ND user options
(for example the first or last option in the RA).
side note: there's actually Android tests verifying
a portion of the old broken behaviour, so:
https://android-review.googlesource.com/c/kernel/tests/+/3196704
fixes those up.
Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Patrick Rohr <prohr@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Fixes: 048c796beb6e ("ipv6: adjust ndisc_is_useropt() to also return true for PIO") Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter") Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.
Fixes: 667daedaecd1 ("net/mlx5e: Toggle link only after modifying port parameters") Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.
Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.
Fixes: 94ceffb48eac ("net/mlx5e: Implement CT entry update") Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.
Fixes: fa5aa2f89073 ("net/mlx5e: Use chains for IPsec policy priority offload") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On sync reset reload work, when remote host updates devlink on reload
actions performed on that host, it misses taking devlink lock before
calling devlink_remote_reload_actions_performed() which results in
triggering lock assert like the following:
The cited commit didn't change the body of the loop as it should.
It shouldn't be using MLX5_LAG_P1.
Fixes: 7e978e7714d6 ("net/mlx5: Lag, use actual number of lag ports") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/20240730061638.1831002-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().
Let's call register_pernet_subsys() before xt_register_template().
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We had a report that iptables-restore sometimes triggered null-ptr-deref
at boot time. [0]
The problem is that iptable_nat_table_init() is exposed to user space
before the kernel fully initialises netns.
In the small race window, a user could call iptable_nat_table_init()
that accesses net_generic(net, iptable_nat_net_id), which is available
only after registering iptable_nat_net_ops.
Let's call register_pernet_subsys() before xt_register_template().
Allow userspace to use damage clips with atomic async flips. Damage
clips are useful for partial plane updates, which can be helpful for
clients that want to do flips asynchronously.
Allow userspace to use explicit synchronization with atomic async flips.
That means that the flip will wait for some hardware fence, and then
will flip as soon as possible (async) in regard of the vblank.
The recent regression report revealed that the use of WC pages for AMD
HDMI device together with AMD IOMMU leads to unexpected truncation or
noises. The issue seems triggered by the change in the kernel core
memory allocation that enables IOMMU driver to use always S/G
buffers. Meanwhile, the use of WC pages has been a workaround for the
similar issue with standard pages in the past. So, now we need to
apply the workaround conditionally, namely, only when IOMMU isn't in
place.
This patch modifies the workaround code to check the DMA ops at first
and apply the snoop-off only when needed.
Since virtual and real addresses are not the same anymore the
assumption that the kernel image is contained within the identity
mapping is also not true anymore.
Fix this by adding two explicit areas and at the correct locations: one
for the 8kb lowcore area, and one for the identity mapping.
The MDIX status is not accurately reflecting the current state after the link
partner has manually altered its MDIX configuration while operating in forced
mode.
Access information about Auto mdix completion and pair selection from the
KSZ9131's Auto/MDI/MDI-X status register
Fixes: b64e6a8794d9 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131") Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This function has a nested loop. The problem is that both the inside
and outside loop use the same variable as an iterator. I found this
via static analysis so I'm not sure the impact. It could be that it
loops forever or, more likely, the loop exits early.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/eaa8f403-7779-4d81-973d-a9ecddc0bf6f@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
iucv_sever_path() is called from process context and from bh context.
iucv->path is used as indicator whether somebody else is taking care of
severing the path (or it is already removed / never existed).
This needs to be done with atomic compare and swap, otherwise there is a
small window where iucv_sock_close() will try to work with a path that has
already been severed and freed by iucv_callback_connrej() called by
iucv_tasklet_fn().
Note that bh_lock_sock() is not serializing the tasklet context against
process context, because the check for sock_owned_by_user() and
corresponding handling is missing.
Ideas for a future clean-up patch:
A) Correct usage of bh_lock_sock() in tasklet context, as described in Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/
Re-enqueue, if needed. This may require adding return values to the
tasklet functions and thus changes to all users of iucv.
B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.
Fixes: 7d316b945352 ("af_iucv: remove IUCV-pathes completely") Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ice_cfg_txq_interrupt() internally handles XDP Tx ring. Do not use
ice_for_each_tx_ring() in ice_qvec_cfg_msix() as this causing us to
treat XDP ring that belongs to queue vector as Tx ring and therefore
misconfiguring the interrupts.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is read by data path and modified from process context on remote cpu
so it is needed to use WRITE_ONCE to clear the pointer.
Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
xsk_buff_pool pointers that ice ring structs hold are updated via
ndo_bpf that is executed in process context while it can be read by
remote CPU at the same time within NAPI poll. Use synchronize_net()
after pointer update and {READ,WRITE}_ONCE() when working with mentioned
pointer.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This so we prevent Tx timeout issues. One of conditions checked on
running in the background dev_watchdog() is netif_carrier_ok(), so let
us turn it off when we disable the queues that belong to a q_vector
where XSK pool is being configured. Turn carrier on in ice_qp_ena()
only when ice_get_link_status() tells us that physical link is up.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Don't bail out right when spotting an error within ice_qp_{dis,ena}()
but rather track error and go through whole flow of disabling and
enabling queue pair.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.
Additionally, turn off regular Tx queue before disabling irqs and NAPI.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b033f ("ice: Add support to
enable/disable all Rx queues before waiting").
To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.
Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.
Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.
Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API") Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
PWR_CLK_STATE only needs to be modified up until gen11. For gen12 this
code is not applicable. Remove code to update context image with
PWR_CLK_STATE for gen12.
The cited commit accidentally replaced tgt_net with net in rtnl_dellink().
As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified
with IFLA_IFNAME or IFLA_ALT_IFNAME.
Let's pass tgt_net to rtnl_dev_get().
Fixes: cc6090e985d7 ("net: rtnetlink: introduce helper to get net_device instance by ifname") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
softirq may get lost if an Rx interrupt comes before we call
napi_enable. Move napi_enable in front of axienet_setoptions(), which
turns on the device, to address the issue.
Link: https://lists.gnu.org/archive/html/qemu-devel/2024-07/msg06160.html Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive") Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
tp->scaling_ratio is not updated based on skb->len/skb->truesize once
SO_RCVBUF is set leading to the maximum window scaling to be 25% of
rcvbuf after
commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale")
and 50% of rcvbuf after
commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio").
50% tries to emulate the behavior of older kernels using
sysctl_tcp_adv_win_scale with default value.
Systems which were using a different values of sysctl_tcp_adv_win_scale
in older kernels ended up seeing reduced download speeds in certain
cases as covered in https://lists.openwall.net/netdev/2024/05/15/13
While the sysctl scheme is no longer acceptable, the value of 50% is
a bit conservative when the skb->len/skb->truesize ratio is later
determined to be ~0.66.
Applications not specifying SO_RCVBUF update the window scaling and
the receiver buffer every time data is copied to userspace. This
computation is now used for applications setting SO_RCVBUF to update
the maximum window scaling while ensuring that the receive buffer
is within the application specified limit.
Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The indirection table and the key follow struct ethtool_rxfh
in user memory.
To reset the indirection table user space calls SET_RXFH with
table of size 0 (OTOH to say "no change" it should use -1 / ~0).
The logic for calculating the offset where they key sits is
incorrect in this case, as kernel would still offset by the full
table length, while for the reset there is no indir table and
key is immediately after the struct.
Fixes: 3de0b592394d ("ethtool: Support for configurable RSS hash key") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When suspending the scan filter policy cannot be 0x00 (no acceptlist)
since that means the host has to process every advertisement report
waking up the system, so this attempts to check if hdev is marked as
suspended and if the resulting filter policy would be 0x00 (no
acceptlist) then skip passive scanning if thre no devices in the
acceptlist otherwise reset the filter policy to 0x01 so the acceptlist
is used since the devices programmed there can still wakeup be system.
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The previous fix (7aeb25908648) only handles the unsol_event reporting
during interrupts and does not include the polling mode used to set
jackroll_ms, so now we are replacing it with
snd_hda_jack_detect_enable_callback.
Fixes: 7aeb25908648 ("ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140") Co-developed-by: bo liu <bo.liu@senarytech.com> Signed-off-by: bo liu <bo.liu@senarytech.com> Signed-off-by: songxiebing <songxiebing@kylinos.cn> Link: https://patch.msgid.link/20240726100726.50824-1-soxiebing@163.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PHY built in to the Realtek RTL8366S switch controller was
previously supported by genphy_driver. This PHY does not implement MMD
operations. Since commit 9b01c885be36 ("net: phy: c22: migrate to
genphy_c45_write_eee_adv()"), MMD register reads have been made during
phy_probe to determine EEE support. For genphy_driver, these reads are
transformed into 802.3 annex 22D clause 45-over-clause 22
mmd_phy_indirect operations that perform MII register writes to
MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers,
which on this PHY are reserved and have another function, rendering the
PHY unusable while so configured.
Proper support for this PHY is restored by providing a phy_driver that
declares MMD operations as unsupported by using the helper functions
provided for that purpose, while remaining otherwise identical to
genphy_driver.
Fixes: 9b01c885be36 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Reported-by: Russell Senior <russell@personaltelco.net> Closes: https://github.com/openwrt/openwrt/issues/15981 Link: https://github.com/openwrt/openwrt/issues/15739 Signed-off-by: Mark Mentovai <mark@mentovai.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The minimum header length calculation (equivalent to the start
of the elements) for the S1G long beacon erroneously required
only up to the start of u.s1g_beacon rather than the start of
u.s1g_beacon.variable. Fix that, and also shuffle the branches
around a bit to not assign useless values that are overwritten
later.
Individual MLO links connection status is not copied to
EVENT_CONNECT_RESULT data while processing the connect response
information in cfg80211_connect_done(). Due to this failed links
are wrongly indicated with success status in EVENT_CONNECT_RESULT.
To fix this, copy the individual MLO links status to the
EVENT_CONNECT_RESULT data.
Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com
[commit message editorial changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Local variable key created at:
tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324
tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408
Fixes: 88c67aeb1407 ("sched: act_ct: add netns into the key of tcf_ct_flow_table") Reported-by: syzbot+1b5e4e187cc586d05ea0@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When multi-monitor is cycled the X,Y position of the Screen Target will
likely change but the resolution will not. We need to trigger a modeset
when this occurs in order to recreate the Screen Target with the correct
X,Y position.
Fixes a bug where multiple displays are shown in a single scrollable
host window rather than in 2+ windows on separate host displays.
The response to a GET request in Netlink should fully identify
the queried object. RSS_GET accepts context id as an input,
so it must echo that attribute back to the response.
The spec for Ethtool is a bit inaccurate. We don't currently
support dump. Context is only accepted as input and not echoed
to output (which is a separate bug).
Fixes: a353318ebf24 ("tools: ynl: populate most of the ethtool spec") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240724234249.2621109-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In __bnxt_reserve_rings(), the existing code unconditionally sets the
default RSS indirection table to default if netif_is_rxfh_configured()
returns false. This used to be correct before we added RSS contexts
support. For example, if the user is changing the number of ethtool
channels, we will enter this path to reserve the new number of rings.
We will then set the RSS indirection table to default to cover the new
number of rings if netif_is_rxfh_configured() is false.
Now, with RSS contexts support, if the user has added or deleted RSS
contexts, we may now enter this path to reserve the new number of VNICs.
However, netif_is_rxfh_configured() will not return the correct state if
we are still in the middle of set_rxfh(). So the existing code may
set the indirection table of the default RSS context to default by
mistake.
Fix it to check if the reservation of the RX rings is changing. Only
check netif_is_rxfh_configured() if it is changing. RX rings will not
change in the middle of set_rxfh() and this will fix the issue.
Fixes: b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()") Reported-and-tested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/20240625010210.2002310-1-kuba@kernel.org Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240724222106.147744-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This code was never updated to support Screen Targets.
Fixes a bug where Xv playback displays a green screen instead of actual
video contents when 3D acceleration is disabled in the guest.
Fixes: c8261a961ece ("vmwgfx: Major KMS refactoring / cleanup in preparation of screen targets") Reported-by: Doug Brown <doug@schmorgal.com> Closes: https://lore.kernel.org/all/bd9cb3c7-90e8-435d-bc28-0e38fee58977@schmorgal.com Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Tested-by: Doug Brown <doug@schmorgal.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719163627.20888-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix races issues in virtual crc generation by making sure the surface
the code uses for crc computation is properly ref counted.
Crc generation was trying to be too clever by allowing the surfaces
to go in and out of scope, with the hope of always having some kind
of screen present. That's not always the code, in particular during
atomic disable, so to make sure the surface, when present, is not
being actively destroyed at the same time, hold a reference to it.
In commit 50c1a36f594b ("drm/gpuvm: track/lock/validate external/evicted
objects") we started using drm_exec, but did not select DRM_EXEC in the
Kconfig for DRM_GPUVM, fix this.
Cc: Christian König <christian.koenig@amd.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: 50c1a36f594b ("drm/gpuvm: track/lock/validate external/evicted objects") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240715135158.133287-1-dakr@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
With 0dd5041c9a0e ("perf addr_location: Add init/exit/copy functions"),
when cpumode is 3 (macro PERF_RECORD_MISC_HYPERVISOR),
thread__find_map() could return with al->maps being NULL.
The path below could add a callchain_cursor_node with NULL ms.maps.
Sensors discovery is independent of HID device initialization. If sensor
discovery fails after HID initialization, then the HID device needs to be
deinitialized. Therefore, sensors discovery should be moved before HID
device initialization.
Fixes: 7bcfdab3f0c6 ("HID: amd_sfh: if no sensors are enabled, clean up") Tested-by: Aurinko <petrvelicka@tuta.io> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Link: https://patch.msgid.link/20240718111616.3012155-1-Basavaraj.Natikar@amd.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
perf_callchain_store() return 0 on success, -1 otherwise, fix
callchain_trace() to return correct bool value. So walk_stackframe() can
have a chance to stop walking the stack ahead.
Fixes: 70ccc7c0667b ("ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
