In gve_adminq_issue_cmd(), return -EINVAL instead of 0 when an unknown
admin queue command opcode is encountered.
This prevents the function from silently succeeding on invalid input
and prevents undefined behavior by ensuring the function fails gracefully
when an unrecognized opcode is provided.
When CONFIG_VLAN_8021Q=n, a set of stub helpers are used, three of these
helpers use BUG() unconditionally.
This code should not be reached, as callers of these functions should
always check for is_vlan_dev() first, but the usage of BUG() is not
recommended, replace it with WARN_ON() instead.
Reviewed-by: Alex Lazar <alazar@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250616132626.1749331-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function `_rtl_pci_init_one_rxdesc()` can fail even when the new
`skb` is passed because of a DMA mapping error. If it fails, the `skb`
is not saved in the rx ringbuffer and thus lost.
[why]
DCN35 is having “DC: failed to blank crtc!” when running HPO
test cases. It's caused by not having sufficient udelay time.
[how]
Replace the old wait_for_blank_complete function with fsleep function to
sleep just until the next frame should come up. This way it doesn't poll
in case the pixel clock or other clock was bugged or until vactive and
the vblank are hit again.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wen Chen <Wen.Chen3@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd->rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.
Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the current implementation, IP coalescing is always enabled and
cannot be disabled.
As setting maximum frames to 0 or 1, or setting delay to zero implies
immediate delivery of single packets/IRQs, disable coalescing in
hardware in these cases.
This also guarantees that coalescing is never enabled with ICFT or ICTT
set to zero, a configuration that could lead to unpredictable behaviour
according to i.MX8MP reference manual.
If the device configuration fails (if `dma_dev->device_config()`),
`sg_dma_address(&sg)` is not initialized and the jump to `err_dma_prep`
leads to calling `dma_unmap_single()` on `sg_dma_address(&sg)`.
When an stp sync check is handled on a system with multiple
cpus each cpu gets a machine check but only the first one
actually handles the sync operation. All other CPUs spin
waiting for the first one to finish with a short udelay().
But udelay can't be used here as the first CPU modifies tod_clock_base
before performing the sync op. During this timeframe
get_tod_clock_monotonic() might return a non-monotonic time.
The time spent waiting should be very short and udelay is a busy loop
anyways, therefore simply remove the udelay.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The buffer bgx_sel used in snprintf() was too small to safely hold
the formatted string "BGX%d" for all valid bgx_id values. This caused
a -Wformat-truncation warning with `Werror` enabled during build.
Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in
snprintf() to ensure safety and suppress the warning.
Build warning:
CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o
drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function
‘bgx_acpi_match_id’:
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’
directive output may be truncated writing between 1 and 3 bytes into a
region of size 2 [-Werror=format-truncation=]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note:
directive argument in the range [0, 255]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~~~~~~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note:
‘snprintf’ output between 5 and 7 bytes into a destination of size 5
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
compiler warning due to insufficient snprintf buffer size.
Currently, __mkroute_output overrules the MTU value configured for
broadcast routes.
This buggy behaviour can be reproduced with:
ip link set dev eth1 mtu 9000
ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2
ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500
The maximum packet size should be 1500, but it is actually 8000:
ping -b 192.168.0.255 -s 8000
Fix __mkroute_output to allow MTU values to be configured for
for broadcast routes (to support a mixed-MTU local-area-network).
On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is
invoked within an interrupts-disabled region of code [1], it will invoke
rcu_read_unlock_special(), which uses an irq-work handler to force the
system to notice when the RCU read-side critical section actually ends.
That end won't happen until interrupts are enabled at the soonest.
In some kernels, such as those booted with rcutree.use_softirq=y, the
irq-work handler is used unconditionally.
The per-CPU rcu_data structure's ->defer_qs_iw_pending field is
updated by the irq-work handler and is both read and updated by
rcu_read_unlock_special(). This resulted in the following KCSAN splat:
BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special
read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8:
rcu_read_unlock_special+0x175/0x260
__rcu_read_unlock+0x92/0xa0
rt_spin_unlock+0x9b/0xc0
__local_bh_enable+0x10d/0x170
__local_bh_enable_ip+0xfb/0x150
rcu_do_batch+0x595/0xc40
rcu_cpu_kthread+0x4e9/0x830
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8:
rcu_preempt_deferred_qs_handler+0x1e/0x30
irq_work_single+0xaf/0x160
run_irq_workd+0x91/0xc0
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
no locks held by irq_work/8/88.
irq event stamp: 200272
hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320
hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70
softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0
softirqs last disabled at (0): [<0000000000000000>] 0x0
The problem is that irq-work handlers run with interrupts enabled, which
means that rcu_preempt_deferred_qs_handler() could be interrupted,
and that interrupt handler might contain an RCU read-side critical
section, which might invoke rcu_read_unlock_special(). In the strict
KCSAN mode of operation used by RCU, this constitutes a data race on
the ->defer_qs_iw_pending field.
This commit therefore disables interrupts across the portion of the
rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending
field. This suffices because this handler is not a fast path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
Management frames sent by userspace should never have the
order/HTC bit set, reject that. It could also cause some
confusion with the length of the buffer and the header so
the validation might end up wrong.
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
We found at Vates that there are lot of spurious interrupts when
benchmarking the xen-net PV driver frontend. This issue appeared with a
patch that addresses security issue XSA-391 (b27d47950e48 "xen/netfront:
harden netfront against event channel storms"). On an iperf benchmark,
spurious interrupts can represent up to 50% of the interrupts.
Spurious interrupts are interrupts that are rised for nothing, there is
no work to do. This appends because the function that handles the
interrupts ("xennet_tx_buf_gc") is also called at the end of the request
path to garbage collect the responses received during the transmission
load.
The request path is doing the work that the interrupt handler should
have done otherwise. This is particurary true when there is more than
one vcpu and get worse linearly with the number of vcpu/queue.
Moreover, this problem is amplifyed by the penalty imposed by a spurious
interrupt. When an interrupt is found spurious the interrupt chip will
delay the EOI to slowdown the backend. This delay will allow more
responses to be handled by the request path and then there will be more
chance the next interrupt will not find any work to do, creating a new
spurious interrupt.
This causes performance issue. The solution here is to remove the calls
from the request path and let the interrupt handler do the processing of
the responses. This approch removes most of the spurious interrupts
(<0.05%) and also has the benefit of freeing up cycles in the request
path, allowing it to process more work, which improves performance
compared to masking the spurious interrupt one way or another.
This optimization changes a part of the code that is present since the
net frontend driver was upstreamed. There is no similar pattern in the
other xen PV drivers. Since the first commit of xen-netfront is a blob
that doesn't explain all the design choices I can only guess why this
specific mecanism was here. This could have been introduce to compensate
a slow backend at the time (maybe the backend was fixed or optimize
later) or a small queue. In 18 years, both frontend and backend gain lot
of features and optimizations that could have obsolete the feature of
reaping completions from the TX path.
Some vif throughput performance figures from a 8 vCPUs, 4GB of RAM HVM
guest(s):
Without this patch on the :
vm -> dom0: 4.5Gb/s
vm -> vm: 7.0Gb/s
Without XSA-391 patch (revert of b27d47950e48):
vm -> dom0: 8.3Gb/s
vm -> vm: 8.7Gb/s
With XSA-391 and this patch:
vm -> dom0: 11.5Gb/s
vm -> vm: 12.6Gb/s
v2:
- add revewed and tested by tags
- resend with the maintainers in the recipients list
v3:
- remove Fixes tag but keep the commit ref in the explanation
- add a paragraph on why this code was here
To be more resilient to codec-detection failures when the hardware
powers on slowly, add retry mechanism to the device verification check.
Similar pattern is found throughout a number of Realtek codecs. Our
tests show that 60ms delay is sufficient to address readiness issues on
rt5640 chip.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Xinxin Wan <xinxin.wan@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://patch.msgid.link/20250530142120.2944095-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SYNC_IN pulse width must be at least 1.5 x Tmclk, corresponding to
~2.5 µs at the lowest supported MCLK frequency. Add a 3 µs delay to
ensure reliable synchronization timing even for the worst-case scenario.
But what the loop does is to multiply the boundary by 2 until it is
over the wanted border. This can be avoided by using fls() to get the
boundary value order and shift it by the appropriate number of bits at
once.
The 'sprintf' call in 'add_tuning_control' may exceed the 44-byte
buffer if either string argument is too long. This triggers a compiler
warning.
Replaced 'sprintf' with 'snprintf' to limit string lengths to prevent
overflow.
If cros_typec_probe is called before EC device is registered,
cros_typec_probe will fail. It may happen when cros-ec-typec.ko is
loaded before EC bus layer module (e.g. cros_ec_lpcs.ko,
cros_ec_spi.ko).
Return -EPROBE_DEFER when cros_typec_probe doesn't get EC device, so
the probe function can be called again after EC device is registered.
When KCOV is enabled all functions get instrumented, unless the
__no_sanitize_coverage attribute is used. To prepare for
__no_sanitize_coverage being applied to __init functions[1], we have
to handle differences in how GCC's inline optimizations get resolved.
For thinkpad_acpi routines, this means forcing two functions to be
inline with __always_inline.
In the function mperf_start(), mperf_monitor snapshots the time, tsc
and finally the aperf,mperf MSRs. However, this order of snapshotting
in is reversed in mperf_stop(). As a result, the C0 residency (which
is computed as delta_mperf * 100 / delta_tsc) is under-reported on
CPUs that is 100% busy.
Fix this by snapshotting time, tsc and then aperf,mperf in
mperf_stop() in the same order as in mperf_start().
Checking for the endpoint type is no reason for a WARN, as that can
cause a reboot. A driver not checking the endpoint type must not cause a
reboot, as there is just no point in this. We cannot prevent a device
from doing something incorrect as a reaction to a transfer. Hence
warning for a mere assumption being wrong is not sensible.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250612122149.2559724-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will
leads to null pointer dereference.
This was reproduced with topology loading and marking a link as ignore
due to missing hardware component on the system.
On module removal the soc_tplg_remove_link() would call
snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored,
no runtime was created.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://patch.msgid.link/20250619084222.559-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
code mistakenly used a hardcoded index (codec[1]) instead of
iterating, over the codec array using the loop variable i.
Use codec[i] instead of codec[1] to match the loop iteration.
We currently log parse failures for ELD data and some disconnection events
as errors without rate limiting. These log messages can be triggered very
frequently in some situations, especially ELD parsing when there is nothing
connected to a HDMI port which will generate:
hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0
While there's doubtless work that could be done on reducing the number of
connection notification callbacks it's possible these may be legitimately
generated by poor quality physical connections so let's use rate limiting
to mitigate the log spam for the parse errors and lower the severity for
disconnect logging to debug level.
The purpose of the warning is to prevent an unexpected change to the return
thunk mitigation. However, there are legitimate cases where the return
thunk is intentionally set more than once. For example, ITS and SRSO both
can set the return thunk after retbleed has set it. In both the cases
retbleed is still mitigated.
Replace the warning with an info about the active return thunk.
In the error path of sd_set_power_mode() we don't update host->power_mode,
which could lead to an imbalance of the runtime PM usage count. Fix this by
always updating host->power_mode.
The BRCMSTB and BRCMSTB_RESCAL reset drivers are also
used in the BCM2712, AKA the RPi5. The RPi platforms
have typically used the ARCH_BCM2835, and the PCIe
support for this SoC can use this config which depends
on these drivers so enable building them when just that
arch option is enabled to ensure the platform works as
expected.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20250630175301.846082-1-pbrobinson@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a GHES (Generic Hardware Error Source) triggers a panic, add the
TAINT_MACHINE_CHECK taint flag to the kernel. This explicitly marks the
kernel as tainted due to a machine check event, improving diagnostics
and post-mortem analysis. The taint is set with LOCKDEP_STILL_OK to
indicate lockdep remains valid.
At large scale deployment, this helps to quickly determine panics that
are coming due to hardware failures.
Many mobile phones feature multi-card tray designs, where the same
tray is used for both SD and SIM cards. If the SD card is placed
at the outermost location in the tray, the SIM card may come in
contact with SD card power-supply while removing the tray, possibly
resulting in SIM damage.
To prevent that, make sure the SD card is really inserted by reading
the Card Detect pin state. If it's not, turn off the power in
sdhci_msm_check_power_status() and also set the BUS_FAIL power state
on the controller as part of pwr_irq handling for BUS_ON request.
Initialization of the local acpi_object in acpi_processor_get_info()
only sets the first 4 bytes to zero and is thus incomplete. This is
indicated by messages like:
acpi ACPI0007:be: Invalid PBLK length [166288104]
Fix this by initializing all 16 bytes of the processor member of that
union.
When the computer enters sleep status without a monitor
connected, the system switches the console to the virtual
terminal tty63(SUSPEND_CONSOLE).
If a monitor is subsequently connected before waking up,
the system skips the required VT restoration process
during wake-up, leaving the console on tty63 instead of
switching back to tty1.
To fix this issue, a global flag vt_switch_done is introduced
to record whether the system has successfully switched to
the suspend console via vt_move_to_console() during suspend.
If the switch was completed, vt_switch_done is set to 1.
Later during resume, this flag is checked to ensure that
the original console is restored properly by calling
vt_move_to_console(orig_fgconsole, 0).
This prevents scenarios where the resume logic skips console
restoration due to incorrect detection of the console state,
especially when a monitor is reconnected before waking up.
According to POSIX spec, EAGAIN returned by read with O_NONBLOCK set
means the read would block. Hence, the common implementation in
nonblocking model will poll the file when the nonblocking read returns
EAGAIN. However, when the target file is thermal zone, this mechanism
will totally malfunction because thermal zone doesn't implement sysfs
notification and thus the poll will never return.
For example, the read in Golang implemnts such method and sometimes
hangs at reading some thermal zones via sysfs.
Change to return -ENODATA instead of -EAGAIN to userspace.
Since commit c5b6ababd21a ("locking/mutex: implement
mutex_trylock_nested") makes mutex_trylock() as an inlined
function if CONFIG_DEBUG_LOCK_ALLOC=y, we can not use
mutex_trylock() for testing the glob filter of ftrace.
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
In order to bring up secondary CPUs main CPU write trampoline
code to SRAM. The trampoline code is written while secondary
CPUs are powered on (at least that true for RK3188 CPU).
Sometimes that leads to kernel hang. Probably because secondary
CPU execute trampoline code while kernel doesn't expect.
The patch moves SRAM initialization step to the point where all
secondary CPUs are powered down.
That fixes rarely hangs on RK3188:
[ 0.091568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.091996] rockchip_smp_prepare_cpus: ncores 4
regmap_update_bits() can fail so check its return value in
wcd_gpio_direction_output() for consistency with the rest of the code
and propagate any errors.
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed as well.
When that flag is set don't show messages in the cleanup path for
marking the controller dead.
There is a subtle contradiction between sections of the xHCI 1.2 spec
regarding the initialization of Input Endpoint Context fields. Section
4.8.2 ("Endpoint Context Initialization") states that all fields should
be initialized to 0. However, Section 6.2.3 ("Endpoint Context", p.453)
specifies that the Average TRB Length (avg_trb_len) field shall be
greater than 0, and explicitly notes (p.454): "Software shall set
Average TRB Length to '8' for control endpoints."
Strictly setting all fields to 0 during initialization conflicts with
the specific recommendation for control endpoints. In practice, setting
avg_trb_len = 0 is not meaningful for the hardware/firmware, as the
value is used for bandwidth calculation.
Motivation: Our company is developing a custom Virtual xHC hardware
platform that strictly follows the xHCI spec and its recommendations.
During validation, we observed that enumeration fails and a parameter
error (TRB Completion Code = 5) is reported if avg_trb_len for EP0 is
not set to 8 as recommended by Section 6.2.3. This demonstrates the
importance of assigning a meaningful, non-zero value to avg_trb_len,
even in virtualized or emulated environments.
This patch explicitly sets avg_trb_len to 8 for EP0 in
xhci_setup_addressable_virt_dev(), as recommended in Section 6.2.3, to
prevent potential issues with xHCI host controllers that enforce the
spec strictly.
When a USB4 dock is unplugged from a system it won't respond to ring
events. The PCI core handles the surprise removal event and notifies
all PCI drivers. The XHCI PCI driver sets a flag that the device is
being removed, and when the device stops responding a flag is also
added to indicate it's dying.
When that flag is set don't bother to show warnings about a missing
controller.
ucsi_psy_get_current_max would return 0mA as the maximum current if
UCSI detected a BC or a Default USB Power sporce.
The comment in this function is true that we can't tell the difference
between DCP/CDP or SDP chargers, but we can guarantee that at least 1-unit
of USB 1.1/2.0 power is available, which is 100mA, which is a better
fallback value than 0, which causes some userspaces, including the ChromeOS
power manager, to regard this as a power source that is not providing
any power.
In reality, 100mA is guaranteed from all sources in these classes.
The kernel does not provide sys_futex() on 32-bit architectures that do not
support 32-bit time representations, such as riscv32.
As a result, glibc cannot define SYS_futex, causing compilation failures in
tests that rely on this syscall. Define SYS_futex as SYS_futex_time64 in
such cases to ensure successful compilation and compatibility.
Signed-off-by: Cynthia Huang <cynthia@andestech.com> Signed-off-by: Ben Zong-You Xie <ben717@andestech.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/all/20250710103630.3156130-1-ben717@andestech.com Signed-off-by: Sasha Levin <sashal@kernel.org>
AMU counters on certain CPPC-based platforms tend to yield inaccurate
delivered performance measurements on systems that are idle/mostly idle.
This results in an inaccurate frequency being stored by cpufreq in its
policy structure when the CPU is brought online. [1]
Consequently, if the userspace governor tries to set the frequency to a
new value, there is a possibility that it would be the erroneous value
stored earlier. In such a scenario, cpufreq would assume that the
requested frequency has already been set and return early, resulting in
the correct/new frequency request never making it to the hardware.
Since the operating frequency is liable to this sort of inconsistency,
mark the CPPC driver with CPUFREQ_NEED_UPDATE_LIMITS so that it is always
invoked when a target frequency update is requested.
When encounters some errors like these:
xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command
xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment
usb usb5-port6: couldn't allocate usb_device
It's hard to know whether xhc_state is dying or halted. So it's better
to print xhc_state's value which can help locate the resaon of the bug.
incidentally, securityfs_recursive_remove() is broken without that -
it leaks dentries, since simple_recursive_removal() does not expect
anything of that sort. It could be worked around by dput() in
remove_one() callback, but it's easier to just drop that double-get
stuff.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Modify ata_scsi_lpm_store() to return an error if a user attempts to set
a link power management policy for a port that does not support LPM,
that is, ports flagged with ATA_FLAG_NO_LPM.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20250701125321.69496-6-dlemoal@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We want a class that nests outside of I_MUTEX_NORMAL (for the sake of
callbacks that might want to lock the victim) and inside I_MUTEX_PARENT
(so that a variant of that could be used with parent of the victim
held locked by the caller).
In reality, simple_recursive_removal()
* never holds two locks at once
* holds the lock on parent of dentry passed to callback
* is used only on the trees with fixed topology, so the depths
are not changing.
So the locking order is actually fine.
AFAICS, the best solution is to assign I_MUTEX_CHILD to the locks
grabbed by that thing.
Reported-by: syzbot+169de184e9defe7fe709@syzkaller.appspotmail.com Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
generic/001 32s ... _check_generic_filesystem: filesystem on /dev/loop50 is inconsistent
(see /home/slavad/XFSTESTS-2/xfstests-dev/results//generic/001.full for details)
Ran: generic/001
Failures: generic/001
Failed 1 of 1 tests
fsck.hfs -d -n ./test-image.bin
** ./test-image.bin (NO WRITE)
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking HFS volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
Unused node is not erased (node = 2)
Unused node is not erased (node = 4)
<skipped>
Unused node is not erased (node = 253)
Unused node is not erased (node = 254)
Unused node is not erased (node = 255)
Unused node is not erased (node = 256)
** Checking catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x0004 CatStat = 0x00000000
** The volume untitled was found corrupt and needs to be repaired.
volume type is HFS
primary MDB is at block 2 0x02
alternate MDB is at block 20971518 0x13ffffe
primary VHB is at block 0 0x00
alternate VHB is at block 0 0x00
sector size = 512 0x200
VolumeObject flags = 0x19
total sectors for volume = 20971520 0x1400000
total sectors for embedded volume = 0 0x00
This patch adds logic of clearing the deleted b-tree node.
With `two-primaries` enabled, DRBD tries to detect "concurrent" writes
and handle write conflicts, so that even if you write to the same sector
simultaneously on both nodes, they end up with the identical data once
the writes are completed.
In handling "superseeded" writes, we forgot a kref_get,
resulting in a premature drbd_destroy_device and use after free,
and further to kernel crashes with symptoms.
Relevance: No one should use DRBD as a random data generator, and apparently
all users of "two-primaries" handle concurrent writes correctly on layer up.
That is cluster file systems use some distributed lock manager,
and live migration in virtualization environments stops writes on one node
before starting writes on the other node.
Which means that other than for "test cases",
this code path is never taken in real life.
FYI, in DRBD 9, things are handled differently nowadays. We still detect
"write conflicts", but no longer try to be smart about them.
We decided to disconnect hard instead: upper layers must not submit concurrent
writes. If they do, that's their fault.
Signed-off-by: Sarah Newman <srn@prgmr.com> Signed-off-by: Lars Ellenberg <lars@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20250627095728.800688-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Verify that number of partition maps isn't insanely high which can lead
to large allocation in udf_sb_alloc_partition_maps(). All partition maps
have to fit in the LVD which is in a single block.
Reported-by: syzbot+478f2c1a6f0f447a46bb@syzkaller.appspotmail.com Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For arm64 this requires forcing one ACPI function to be inlined with
__always_inline.
When the volume header contains erroneous values that do not reflect
the actual state of the filesystem, hfsplus_fill_super() assumes that
the attributes file is not yet created, which later results in hitting
BUG_ON() when hfsplus_create_attributes_file() is called. Replace this
BUG_ON() with -EIO error with a message to suggest running fsck tool.
where HFSPLUS_MAX_STRLEN is 255 bytes. The issue happens if length
of the structure instance has value bigger than 255 (for example,
65283). In such case, pointer on unicode buffer is going beyond of
the allocated memory.
The patch fixes the issue by checking the length value of
hfsplus_unistr instance and using 255 value in the case if length
value is bigger than HFSPLUS_MAX_STRLEN. Potential reason of such
situation could be a corruption of Catalog File b-tree's node.
Reported-by: Wenzhi Wang <wenzhi.wang@uwaterloo.ca> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org Reviewed-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20250710230830.110500-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reason of the issue that code doesn't check the correctness
of the requested offset and length. As a result, incorrect value
of offset or/and length could result in access out of allocated
memory.
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfsplus_bnode_read(), hfsplus_bnode_write(),
hfsplus_bnode_clear(), hfsplus_bnode_copy(), and hfsplus_bnode_move()
with the goal to prevent the access out of allocated memory
and triggering the crash.
Reported-by: Kun Hu <huk23@m.fudan.edu.cn> Reported-by: Jiaji Qin <jjtan24@m.fudan.edu.cn> Reported-by: Shuoran Bai <baishuoran@hrbeu.edu.cn> Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Link: https://lore.kernel.org/r/20250703214804.244077-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(),
hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent
the access out of allocated memory and triggering the crash.
Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
There is a reference count leak in ctnetlink_dump_table():
if (res < 0) {
nf_conntrack_get(&ct->ct_general); // HERE
cb->args[1] = (unsigned long)ct;
...
While its very unlikely, its possible that ct == last.
If this happens, then the refcount of ct was already incremented.
This 2nd increment is never undone.
This prevents the conntrack object from being released, which in turn
keeps prevents cnet->count from dropping back to 0.
This will then block the netns dismantle (or conntrack rmmod) as
nf_conntrack_cleanup_net_list() will wait forever.
This can be reproduced by running conntrack_resize.sh selftest in a loop.
It takes ~20 minutes for me on a preemptible kernel on average before
I see a runaway kworker spinning in nf_conntrack_cleanup_net_list.
One fix would to change this to:
if (res < 0) {
if (ct != last)
nf_conntrack_get(&ct->ct_general);
But this reference counting isn't needed in the first place.
We can just store a cookie value instead.
A followup patch will do the same for ctnetlink_exp_dump_table,
it looks to me as if this has the same problem and like
ctnetlink_dump_table, we only need a 'skip hint', not the actual
object so we can apply the same cookie strategy there as well.
Commit b40c5f4fde22 ("udp: disable inner UDP checksum offloads in
IPsec case") tried to fix checksumming in UFO when the packets are
going through IPsec, so that we can't rely on offloads because the UDP
header and payload will be encrypted.
But when doing a TCP test over VXLAN going through IPsec transport
mode with GSO enabled (esp4_offload module loaded), I'm seeing broken
UDP checksums on the encap after successful decryption.
The skbs get to udp4_ufo_fragment/__skb_udp_tunnel_segment via
__dev_queue_xmit -> validate_xmit_skb -> skb_gso_segment and at this
point we've already dropped the dst (unless the device sets
IFF_XMIT_DST_RELEASE, which is not common), so need_ipsec is false and
we proceed with checksum offload.
Make need_ipsec also check the secpath, which is not dropped on this
callpath.
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application") Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the BIOS sets a _PPC frequency limit upfront, it will fail to take
effect due to a call ordering issue. Namely, freq_qos_update_request()
is called before freq_qos_add_request() for the given request causing
the constraint update to be ignored. The call sequence in question is
as follows:
Address this by adding an acpi_processor_get_platform_limit() call
to acpi_processor_ppc_init(), after the perflib_req activation via
freq_qos_add_request(), which causes the initial _PPC limit to be
picked up as appropriate. However, also ensure that the _PPC limit
will not be picked up in the cases when the cpufreq driver does not
call acpi_processor_register_performance() by adding a pr->performance
check to the related_cpus loop in acpi_processor_ppc_init().
Fixes: d15ce412737a ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier") Signed-off-by: Jiayi Li <lijiayi@kylinos.cn> Link: https://patch.msgid.link/20250721032606.3459369-1-lijiayi@kylinos.cn
[ rjw: Consolidate pr-related checks in acpi_processor_ppc_init() ]
[ rjw: Subject and changelog adjustments ] Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 2d8b39a62a5d ACPI: processor: Avoid NULL pointer dereferences at init time Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: 3000ce3c52f8 cpufreq: Use per-policy frequency QoS Cc: 5.4+ <stable@vger.kernel.org> # 5.4+: a1bb46c36ce3 ACPI: processor: Add QoS requests for all CPUs Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _CRS resources in many cases want to have ResourceSource field
to be a type of ACPI String. This means that to compile properly
we need to enclosure the name path into double quotes. This will
in practice defer the interpretation to a run-time stage, However,
this may be interpreted differently on different OSes and ACPI
interpreter implementations. In particular ACPICA might not correctly
recognize the leading '^' (caret) character and will not resolve
the relative name path properly. On top of that, this piece may be
used in SSDTs which are loaded after the DSDT and on itself may also
not resolve relative name paths outside of their own scopes.
With this all said, fix documentation to use fully-qualified name
paths always to avoid any misinterpretations, which is proven to
work.
Fixes: 8eb5c87a92c0 ("i2c: add ACPI support for I2C mux ports") Reported-by: Yevhen Kondrashyn <e.kondrashyn@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250710170225.961303-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa424 ("get rid of NR_OPEN and introduce a sysctl_nr_open") Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using device_find_child() to locate a probed virtual-device-port node
causes a device refcount imbalance, as device_find_child() internally
calls get_device() to increment the device’s reference count before
returning its pointer. vdc_port_mpgroup_check() directly returns true
upon finding a matching device without releasing the reference via
put_device(). We should call put_device() to decrement refcount.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 3ee70591d6c4 ("sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://lore.kernel.org/r/20250719075856.3447953-1-make24@iscas.ac.cn Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the client sends an OPEN with claim type CLAIM_DELEG_CUR_FH or
CLAIM_DELEGATION_CUR, the delegation stateid and the file handle
must belong to the same file, otherwise return NFS4ERR_INVAL.
Note that RFC8881, section 8.2.4, mandates the server to return
NFS4ERR_BAD_STATEID if the selected table entry does not match the
current filehandle. However returning NFS4ERR_BAD_STATEID in the
OPEN causes the client to retry the operation and therefor get the
client into a loop. To avoid this situation we return NFS4ERR_INVAL
instead.
Reported-by: Petro Pavlov <petro.pavlov@vastdata.com> Fixes: c44c5eeb2c02 ("[PATCH] nfsd4: add open state code for CLAIM_DELEGATE_CUR") Cc: stable@vger.kernel.org Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lei Lu recently reported that nfsd4_setclientid_confirm() did not check
the return value from get_client_locked(). a SETCLIENTID_CONFIRM could
race with a confirmed client expiring and fail to get a reference. That
could later lead to a UAF.
Fix this by getting a reference early in the case where there is an
extant confirmed client. If that fails then treat it as if there were no
confirmed client found at all.
In the case where the unconfirmed client is expiring, just fail and
return the result from get_client_locked().
Reported-by: lei lu <llfamsec@gmail.com> Closes: https://lore.kernel.org/linux-nfs/CAEBF3_b=UvqzNKdnfD_52L05Mqrqui9vZ2eFamgAbV0WG+FNWQ@mail.gmail.com/ Fixes: d20c11d86d8f ("nfsd: Protect session creation and client confirm using client_lock") Cc: stable@vger.kernel.org Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netlink_attachskb() checks for the socket's read memory allocation
constraints. Firstly, it has:
rmem < READ_ONCE(sk->sk_rcvbuf)
to check if the just increased rmem value fits into the socket's receive
buffer. If not, it proceeds and tries to wait for the memory under:
rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf)
The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is
equal to sk->sk_rcvbuf. Thus the function neither successfully accepts
these conditions, nor manages to reschedule the task - and is called in
retry loop for indefinite time which is caught as:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212
(t=26000 jiffies g=230833 q=259957)
NMI backtrace for cpu 0
CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014
Call Trace:
<IRQ>
dump_stack lib/dump_stack.c:120
nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105
nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62
rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335
rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590
update_process_times kernel/time/timer.c:1953
tick_sched_handle kernel/time/tick-sched.c:227
tick_sched_timer kernel/time/tick-sched.c:1399
__hrtimer_run_queues kernel/time/hrtimer.c:1652
hrtimer_interrupt kernel/time/hrtimer.c:1717
__sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113
asm_call_irq_on_stack arch/x86/entry/entry_64.S:808
</IRQ>
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
__kernel_rwf_t is defined as int, the actual size of which is
implementation defined. It won't go well if some compiler / archs
ever defines it as i64, so replace it with __u32, hoping that
there is no one using i16 for it.
1. In func configfs_composite_bind() -> composite_os_desc_req_prepare():
if kmalloc fails, the pointer cdev->os_desc_req will be freed but not
set to NULL. Then it will return a failure to the upper-level function.
2. in func configfs_composite_bind() -> composite_dev_cleanup():
it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it
will attempt to use it.This will lead to a use-after-free issue.
BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0
Read of size 8 at addr 0000004827837a00 by task init/1
CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1
kasan_report+0x188/0x1cc
__asan_load8+0xb4/0xbc
composite_dev_cleanup+0xf4/0x2c0
configfs_composite_bind+0x210/0x7ac
udc_bind_to_driver+0xb4/0x1ec
usb_gadget_probe_driver+0xec/0x21c
gadget_dev_desc_UDC_store+0x264/0x27c
Hardware or bootloader will initialize TLB entries to any value, which
may collide with kernel's UNIQUE_ENTRYHI value. On MIPS microAptiv/M5150
family of cores this will trigger machine check exception and cause boot
failure. On M5150 simulation this could happen 7 times out of 1000 boots.
Replace local_flush_tlb_all() with r4k_tlb_uniquify() which probes each
TLB ENTRIHI unique value for collisions before it's written, and in case
of collision try a different ASID.
Cc: stable@kernel.org Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T99W709 is designed based on MTK T300(5G redcap) chip. There are
7 serial ports to be enumerated: AP_LOG, GNSS, AP_META, AT,
MD_META, NPT, DBG. RSVD(5) for ADB port.
It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can
cause a use-after-free when a connection is made to the bound socket.
The socket returned by accept() also has port VMADDR_PORT_ANY but is not
on the list of unbound sockets. Binding it will result in an extra
refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep
the binding until socket destruction).
Modify the check in __vsock_bind_connectible() to also prevent binding
to VMADDR_PORT_ANY.
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076edea7
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250801175423.2970334-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec679c ("perf/core: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e50471 ("perf/core: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
