Linus Torvalds [Fri, 21 Nov 2025 18:43:58 +0000 (10:43 -0800)]
Merge tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a use-after-free bug in GPIO character device code
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update my email address
gpio: cdev: make sure the cdev fd is still active before emitting events
Linus Torvalds [Fri, 21 Nov 2025 17:55:55 +0000 (09:55 -0800)]
Merge tag 'drm-fixes-2025-11-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"A range of small fixes across the board, the i915 display
disambiguation is probably the biggest otherwise amdgpu and xe as
usual with tegra, nouveau, radeon and a core atomic fix.
Looks mostly normal.
atomic:
- Return error codes on failed blob creation for planes
nouveau:
- Fix memory leak
tegra:
- Fix device ref counting
- Fix pid ref counting
- Revert booting on Pixel C
xe:
- Fix out-of-bounds access with BIT()
- Fix kunit test checking wrong condition
- Drop duplicate kconfig select
- Fix guc2host irq handler with MSI-X
i915:
- Wildcat Lake and Panther Lake detangled for display fixes
* tag 'drm-fixes-2025-11-21' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/amdgpu: Add sriov vf check for VCN per queue reset support.
drm/amdgpu/ttm: Fix crash when handling MMIO_REMAP in PDE flags
drm/amdgpu/vm: Check PRT uAPI flag instead of PTE flag
drm/amdgpu: Skip emit de meta data on gfx11 with rs64 enabled
drm/amd: Skip power ungate during suspend for VPE
drm/plane: Fix create_in_format_blob() return value
drm/xe/irq: Handle msix vector0 interrupt
drm/xe: Remove duplicate DRM_EXEC selection from Kconfig
drm/xe/kunit: Fix forcewake assertion in mocs test
drm/xe: Prevent BIT() overflow when handling invalid prefetch region
drm/radeon: delete radeon_fence_process in is_signaled, no deadlock
drm/amd/display: Fix pbn to kbps Conversion
drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5
drm/amd/display: Add an HPD filter for HDMI
drm/amd/display: Increase DPCD read retries
drm/amd/display: Move sleep into each retry for retrieve_link_cap()
drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched
drm/i915/xe3: Restrict PTL intel_encoder_is_c10phy() to only PHY A
drm/i915/display: Add definition for wcl as subplatform
drm/pcids: Split PTL pciids group to make wcl subplatform
...
Linus Torvalds [Fri, 21 Nov 2025 17:29:02 +0000 (09:29 -0800)]
samples: work around glibc redefining some of our defines wrong
Apparently as of version 2.42, glibc headers define AT_RENAME_NOREPLACE
and some of the other flags for renameat2() and friends in <stdio.h>.
Which would all be fine, except for inexplicable reasons glibc decided
to define them _differently_ from the kernel definitions, which then
makes some of our sample code that includes both kernel headers and user
space headers unhappy, because the compiler will (correctly) complain
about redefining things.
Now, mixing kernel headers and user space headers is always a somewhat
iffy proposition due to namespacing issues, but it's kind of inevitable
in our sample and selftest code. And this is just glibc being stupid.
Those defines come from the kernel, glibc is exposing the kernel
interfaces, and glibc shouldn't make up some random new expressions for
these values.
It's not like glibc headers changed the actual result values, but they
arbitrarily just decided to use a different expression to describe those
values. The kernel just does
instead. Same value in the end, but very different macro definition.
For absolutely no reason.
This has since been fixed in the glibc development tree, so eventually
we'll end up with the canonical expressions and no clashes. But in the
meantime the broken headers are in the glibc-2.42 release and have made
it out into distributions.
Do a minimal work-around to make the samples build cleanly by just
undefining the affected macros in between the user space header include
and the kernel header includes.
Linus Torvalds [Thu, 20 Nov 2025 19:04:37 +0000 (11:04 -0800)]
Merge tag 'sched_ext-for-6.18-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"One low risk and obvious fix: scx_enable() was dereferencing an error
pointer on helper kthread creation failure. Fixed"
* tag 'sched_ext-for-6.18-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix scx_enable() crash on helper kthread creation failure
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure.
Linus Torvalds [Thu, 20 Nov 2025 17:46:52 +0000 (09:46 -0800)]
Merge tag 'pm-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a regression introduced during the 6.16 development cycle that may
cause runtime PM to be enabled by mistake for devices that do not
support it (which may lead to some serious trouble) if there is a
system wakeup event during the "late suspend" phase of system suspend"
* tag 'pm-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Fix runtime PM enabling in device_resume_early()
Linus Torvalds [Thu, 20 Nov 2025 17:44:27 +0000 (09:44 -0800)]
Merge tag 'acpi-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes EINJV2 support introduced during the 6.17 cycle by
unbreaking the initialization broken by a previous attempted fix,
adding sanity checks for data coming from the platform firmware, and
updating the code to handle injecting legacy error types on an EINJV2
capable systems properly (Tony Luck)"
* tag 'acpi-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: APEI: EINJ: Fix EINJV2 initialization and injection
Linus Torvalds [Thu, 20 Nov 2025 17:39:34 +0000 (09:39 -0800)]
Merge tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
Linus Torvalds [Thu, 20 Nov 2025 16:52:07 +0000 (08:52 -0800)]
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
Michal Luczaj [Wed, 19 Nov 2025 14:02:59 +0000 (15:02 +0100)]
vsock: Ignore signal/timeout on connect() if already established
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
Andrey Vatoropin [Wed, 19 Nov 2025 10:51:12 +0000 (10:51 +0000)]
be2net: pass wrb_params in case of OS2BMC
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit bc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Paolo Abeni [Thu, 20 Nov 2025 12:02:00 +0000 (13:02 +0100)]
Merge tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless-2025-11-20
A single fix for scanning on some rtw89 devices.
* tag 'wireless-2025-11-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: rtw89: hw_scan: Don't let the operating channel be last
====================
David Bauer [Tue, 18 Nov 2025 00:16:18 +0000 (01:16 +0100)]
l2tp: reset skb control buffer on xmit
The L2TP stack did not reset the skb control buffer before sending the
encapsulated package.
In a setup with an ath10k radio and batman-adv over an L2TP tunnel
massive fragmentations happen sporadically if the L2TP tunnel is
established over IPv4.
L2TP might reset some of the fields in the IP control buffer, but L2TP
assumes the type of the control buffer to be of an IPv4 packet.
In case the L2TP interface is used as a batadv hardif or the packet is
an IPv6 packet, this assumption breaks.
Clear the entire control buffer to avoid such mishaps altogether.
Correct RGMII delay application logic in lan937x_set_tune_adj().
The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the
new delay value. This caused the new value to be bitwise-OR'd with the
existing PORT_TUNE_ADJ field instead of replacing it.
For example, when setting the RGMII 2 TX delay on port 4, the
intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was
incorrectly OR'd with the default 0x1B (from register value 0xDA3),
leaving the delay at the wrong setting.
This patch adds the missing mask to clear the field, ensuring the
correct delay value is written. Physical measurements on the RGMII TX
lines confirm the fix, showing the delay changing from ~1ns (before
change) to ~2ns.
While testing on i.MX 8MP showed this was within the platform's timing
tolerance, it did not match the intended hardware-characterized value.
Fixes: b19ac41faa3f ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Johannes Berg [Thu, 20 Nov 2025 08:43:24 +0000 (09:43 +0100)]
Merge tag 'rtw-2025-11-20' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
==================
rtw patches for v6.18-rc7
Fix firmware goes wrong and causes device unusable after scanning. This
issue presents under certain regulatory domain reported from end users.
==================
Jakub Kicinski [Thu, 20 Nov 2025 04:10:53 +0000 (20:10 -0800)]
Merge branch '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-18 (idpf, ice)
This series contains updates to idpf and ice drivers.
Emil adds a check for NULL vport_config during removal to avoid NULL
pointer dereference in idpf.
Grzegorz fixes PTP teardown paths to account for some missed cleanups
for ice driver.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix PTP cleanup on driver removal in error path
idpf: fix possible vport_config NULL pointer deref in remove
====================
Gang Yan [Tue, 18 Nov 2025 07:20:29 +0000 (08:20 +0100)]
selftests: mptcp: add a check for 'add_addr_accepted'
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Gang Yan [Tue, 18 Nov 2025 07:20:28 +0000 (08:20 +0100)]
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
Fix inverted WARN_ON_ONCE condition that prevented normal address
removal counter updates. The current code only executes decrement
logic when the counter is already 0 (abnormal state), while
normal removals (counter > 0) are ignored.
Signed-off-by: Gang Yan <yangang@kylinos.cn> Fixes: 636113918508 ("mptcp: pm: remove '_nl' from mptcp_pm_nl_rm_addr_received") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-10-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
selftests: mptcp: join: fastclose: remove flaky marks
After recent fixes like the parent commit, and "selftests: mptcp:
connect: trunc: read all recv data", the two fastclose subtests no
longer look flaky any more.
It then feels fine to remove these flaky marks, to no longer ignore
these subtests in case of errors.
Paolo Abeni [Tue, 18 Nov 2025 07:20:24 +0000 (08:20 +0100)]
mptcp: fix duplicate reset on fastclose
The CI reports sporadic failures of the fastclose self-tests. The root
cause is a duplicate reset, not carrying the relevant MPTCP option.
In the failing scenario the bad reset is received by the peer before
the fastclose one, preventing the reception of the latter.
Indeed there is window of opportunity at fastclose time for the
following race:
Paolo Abeni [Tue, 18 Nov 2025 07:20:23 +0000 (08:20 +0100)]
mptcp: decouple mptcp fastclose from tcp close
With the current fastclose implementation, the mptcp_do_fastclose()
helper is in charge of two distinct actions: send the fastclose reset
and cleanup the subflows.
Formally decouple the two steps, ensuring that mptcp explicitly closes
all the subflows after the mentioned helper.
This will make the upcoming fix simpler, and allows dropping the 2nd
argument from mptcp_destroy_common(). The Fixes tag is then the same as
in the next commit to help with the backports.
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 18 Nov 2025 07:20:22 +0000 (08:20 +0100)]
mptcp: do not fallback when OoO is present
In case of DSS corruption, the MPTCP protocol tries to avoid the subflow
reset if fallback is possible. Such corruptions happen in the receive
path; to ensure fallback is possible the stack additionally needs to
check for OoO data, otherwise the fallback will break the data stream.
Paolo Abeni [Tue, 18 Nov 2025 07:20:21 +0000 (08:20 +0100)]
mptcp: fix premature close in case of fallback
I'm observing very frequent self-tests failures in case of fallback when
running on a CONFIG_PREEMPT kernel.
The root cause is that subflow_sched_work_if_closed() closes any subflow
as soon as it is half-closed and has no incoming data pending.
That works well for regular subflows - MPTCP needs bi-directional
connectivity to operate on a given subflow - but for fallback socket is
race prone.
When TCP peer closes the connection before the MPTCP one,
subflow_sched_work_if_closed() will schedule the MPTCP worker to
gracefully close the subflow, and shortly after will do another schedule
to inject and process a dummy incoming DATA_FIN.
On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the
fallback subflow before subflow_sched_work_if_closed() is able to create
the dummy DATA_FIN, unexpectedly interrupting the transfer.
Address the issue explicitly avoiding closing fallback subflows on when
the peer is only half-closed.
Note that, when the subflow is able to create the DATA_FIN before the
worker invocation, the worker will change the msk state before trying to
close the subflow and will skip the latter operation as the msk will not
match anymore the precondition in __mptcp_close_subflow().
Fixes: f09b0ad55a11 ("mptcp: close subflow when receiving TCP+FIN") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 18 Nov 2025 07:20:20 +0000 (08:20 +0100)]
mptcp: avoid unneeded subflow-level drops
The rcv window is shared among all the subflows. Currently, MPTCP sync
the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time.
The above means that incoming data may sporadically observe outdated
TCP-level rcv window and being wrongly dropped by TCP.
Address the issue checking for the edge condition before queuing the
data at TCP level, and eventually syncing the rcv window as needed.
Note that the issue is actually present from the very first MPTCP
implementation, but backports older than the blamed commit below will
range from impossible to useless.
Paolo Abeni [Tue, 18 Nov 2025 07:20:19 +0000 (08:20 +0100)]
mptcp: fix ack generation for fallback msk
mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level
rcv_wnd sent, and such information is tracked into the msk->old_wspace
field, updated at ack transmission time by mptcp_write_options().
Fallback socket do not add any mptcp options, such helper is never
invoked, and msk->old_wspace value remain stale. That in turn makes
ack generation at recvmsg() time quite random.
Address the issue ensuring mptcp_write_options() is invoked even for
fallback sockets, and just update the needed info in such a case.
The issue went unnoticed for a long time, as mptcp currently overshots
the fallback socket receive buffer autotune significantly. It is going
to change in the near future.
Bitterblue Smith [Thu, 13 Nov 2025 22:54:48 +0000 (00:54 +0200)]
wifi: rtw89: hw_scan: Don't let the operating channel be last
Scanning can be offloaded to the firmware. To that end, the driver
prepares a list of channels to scan, including periodic visits back to
the operating channel, and sends the list to the firmware.
When the channel list is too long to fit in a single H2C message, the
driver splits the list, sends the first part, and tells the firmware to
scan. When the scan is complete, the driver sends the next part of the
list and tells the firmware to scan.
When the last channel that fit in the H2C message is the operating
channel something seems to go wrong in the firmware. It will
acknowledge receiving the list of channels but apparently it will not
do anything more. The AP can't be pinged anymore. The driver still
receives beacons, though.
One way to avoid this is to split the list of channels before the
operating channel.
Affected devices:
* RTL8851BU with firmware 0.29.41.3
* RTL8832BU with firmware 0.29.29.8
* RTL8852BE with firmware 0.29.29.8
The commit 57a5fbe39a18 ("wifi: rtw89: refactor flow that hw scan handles channel list")
is found by git blame, but it is actually to refine the scan flow, but not
a culprit, so skip Fixes tag.
drm/amdgpu/ttm: Fix crash when handling MMIO_REMAP in PDE flags
The MMIO_REMAP BO is a special 4K IO page that does not have a ttm_tt
behind it. However, amdgpu_ttm_tt_pde_flags() was treating it like
normal TT/doorbell/preempt memory and unconditionally accessed
ttm->caching. For the MMIO_REMAP BO, ttm is NULL, so this leads to a
NULL pointer dereference when computing PDE flags.
Fix this by checking that ttm is non-NULL before reading ttm->caching.
This prevents the crash for MMIO_REMAP and also makes the code more
defensive if other BOs ever come through without a ttm_tt.
Fixes: fb5a52dbe9fe ("drm/amdgpu: Implement TTM handling for MMIO_REMAP placement") Suggested-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Tested-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0db94da5a0a1cacda080b9ec8425fcbe4babc141)
Timur Kristóf [Wed, 19 Nov 2025 09:25:42 +0000 (10:25 +0100)]
drm/amdgpu/vm: Check PRT uAPI flag instead of PTE flag
This fixes sparse mappings (aka. partially resident textures).
Check the correct flags.
Since a recent refactor, the code works with uAPI flags (for
mapping buffer objects), and not PTE (page table entry) flags.
Fixes: 6716a823d18d ("drm/amdgpu: rework how PTE flags are generated v3") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8feeab26c80635b802f72b3ed986c693ff8f3212)
Yifan Zha [Fri, 14 Nov 2025 09:48:58 +0000 (17:48 +0800)]
drm/amdgpu: Skip emit de meta data on gfx11 with rs64 enabled
[Why]
Accoreding to CP updated to RS64 on gfx11,
WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW.
That packet is used for MCBP on F32 based system.
So it would lead to incorrect GRBM write and FW is not handling that
extra case correctly.
[How]
With gfx11 rs64 enabled, skip emit de meta data.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8366cd442d226463e673bed5d199df916f4ecbcf) Cc: stable@vger.kernel.org
During the suspend sequence VPE is already going to be power gated
as part of vpe_suspend(). It's unnecessary to call during calls to
amdgpu_device_set_pg_state().
It actually can expose a race condition with the firmware if s0i3
sequence starts as well. Drop these calls.
Cc: Peyton.Lee@amd.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2a6c826cfeedd7714611ac115371a959ead55bda) Cc: stable@vger.kernel.org
Ville Syrjälä [Wed, 12 Nov 2025 23:30:28 +0000 (01:30 +0200)]
drm/plane: Fix create_in_format_blob() return value
create_in_format_blob() is either supposed to return a valid
pointer or an error, but never NULL. The caller will dereference
the blob when it is not an error, and thus will oops if NULL
returned. Return proper error values in the failure cases.
Cc: stable@vger.kernel.org Cc: Arun R Murthy <arun.r.murthy@intel.com> Fixes: 0d6dcd741c26 ("drm/plane: modify create_in_formats to acommodate async") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patch.msgid.link/20251112233030.24117-2-ville.syrjala@linux.intel.com Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Linus Torvalds [Wed, 19 Nov 2025 17:36:04 +0000 (09:36 -0800)]
Merge tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are mainly devicetree fixes for the arm platforms from Rockchips
NXP, ASpeed and Broadcom, addressing issues with accidental
overclocking, pinctrl, network and dtc warnings.
There are additional fixes for regressions with the i.MX reset and
memory controller drivers as well as the Tegra memory controller
driver.
Minor updates to the MAINTAINERS file, tee documentation and
defconfigs bring those up to date with recent changes elsewhere"
* tag 'soc-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
MAINTAINERS: sync omap devicetree maintainers with omap platform
MAINTAINERS: Update Krzysztof Kozlowski's email
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
tee: <uapi/linux/tee.h: fix all kernel-doc issues
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: broadcom: bcm2712: rpi-5: Add ethernet0 alias
arm64: dts: broadcom: Assign clock rates in eth node for RPi5
reset: imx8mp-audiomix: Fix bad mask values
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
arm64: defconfig: Fix V3D deferred probe timeout
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
memory: tegra210: Fix incorrect client ids
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
...
Linus Torvalds [Wed, 19 Nov 2025 17:26:09 +0000 (09:26 -0800)]
Merge tag 'pwm/for-6.18-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Correct mismatched pwm chip info for adp5585.
Luke Wang found a problem in the pwm-adp5585 driver about how register
information is mapped to the different device variants. This
effectively made the driver non-functional.
That didn't pop up before because the driver change was developed as
part of a bigger mfd series and the original author didn't retest PWM
functionality after it was tested in an earlier revision but then
reworked"
* tag 'pwm/for-6.18-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: adp5585: Correct mismatched pwm chip info
Linus Torvalds [Wed, 19 Nov 2025 16:54:58 +0000 (08:54 -0800)]
Merge tag 'hid-for-linus-2025111901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- memory leak fixes in hid-uclogic, hid-ntrig and hid-playstation
drivers (Abdun Nihaal, Masami Ichikawa)
- regression fix for playback handling in hid-pidff (Tomasz Pakuła)
- initialization fix for some amd_sfh platforms (Mario Limonciello)
- a few assorted device-specific ID additions and quirks
* tag 'hid-for-linus-2025111901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: uclogic: Fix potential memory leak in error path
HID: playstation: Fix memory leak in dualshock4_get_calibration_data()
HID: pidff: Fix needs_playback check
HID: corsair-void: Use %pe for printing PTR_ERR
HID: elecom: Add support for ELECOM M-XT3URBK (018F)
HID: hid-input: Extend Elan ignore battery quirk to USB
HID: hid-ntrig: Prevent memory leak in ntrig_report_version()
HID: amd_sfh: Stop sensor before starting
HID: apple: Add SONiX AK870 PRO to non_apple_keyboards quirk list
HID: lenovo: fixup Lenovo Yoga Slim 7x Keyboard rdesc
HID: quirks: work around VID/PID conflict for 0x4c4a/0x4155
Wei Fang [Mon, 17 Nov 2025 10:29:43 +0000 (18:29 +0800)]
net: phylink: add missing supported link modes for the fixed-link
Pause, Asym_Pause and Autoneg bits are not set when pl->supported is
initialized, so these link modes will not work for the fixed-link. This
leads to a TCP performance degradation issue observed on the i.MX943
platform.
The switch CPU port of i.MX943 is connected to an ENETC MAC, this link
is a fixed link and the link speed is 2.5Gbps. And one of the switch
user ports is the RGMII interface, and its link speed is 1Gbps. If the
flow-control of the fixed link is not enabled, we can easily observe
the iperf performance of TCP packets is very low. Because the inbound
rate on the CPU port is greater than the outbound rate on the user port,
the switch is prone to congestion, leading to the loss of some TCP
packets and requiring multiple retransmissions.
Solving this problem should be as simple as setting the Asym_Pause and
Pause bits. The reason why the Autoneg bit needs to be set, Russell
has gave a very good explanation in the thread [1], see below.
"As the advertising and lp_advertising bitmasks have to be non-empty,
and the swphy reports aneg capable, aneg complete, and AN enabled, then
for consistency with that state, Autoneg should be set. This is how it
was prior to the blamed commit."
Linus Torvalds [Wed, 19 Nov 2025 16:27:05 +0000 (08:27 -0800)]
Merge tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix memblock_estimated_nr_free_pages() for soft-reserved memory
The "soft-reserved" memory regions (EFI_MEMORY_SP) are added to the
memblock.reserved, but not to the memblock.memory. It causes
memblock_estimated_nr_free_pages() to return a value smaller value
than expected, or if it underflows, an extremely large value.
Calculate the number of estimated free pages using
memblock_reserved_kern_size() instead of memblock_reserved_size() to
fix the issue"
* tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_estimated_nr_free_pages() for soft-reserved memory
gpio: cdev: make sure the cdev fd is still active before emitting events
With the final call to fput() on a file descriptor, the release action
may be deferred and scheduled on a work queue. The reference count of
that descriptor is still zero and it must not be used. It's possible
that a GPIO change, we want to notify the user-space about, happens
AFTER the reference count on the file descriptor associated with the
character device went down to zero but BEFORE the .release() callback
was called from the workqueue and so BEFORE we unregistered from the
notifier.
Using the regular get_file() routine in this situation triggers the
following warning:
struct file::f_count incremented from zero; use-after-free condition present!
So use the get_file_active() variant that will return NULL on file
descriptors that have been or are being released.
Fixes: 40b7c49950bd ("gpio: cdev: put emitting the line state events on a workqueue") Reported-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Closes: https://lore.kernel.org/all/5d605f7fc99456804911403102a4fe999a14cc85.camel@siemens.com/ Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20251117-gpio-cdev-get-file-v1-1-28a16b5985b8@linaro.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The test covers various cases to verify SO_PEEK_OFF behaviour
for all AF_UNIX socket types.
two_chunks_blocking and two_chunks_overlap_blocking reproduce
the issue mentioned in the previous patch.
Without the patch, the two tests fail:
# RUN so_peek_off.stream.two_chunks_blocking ...
# so_peek_off.c:121:two_chunks_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_blocking
not ok 3 so_peek_off.stream.two_chunks_blocking
# RUN so_peek_off.stream.two_chunks_overlap_blocking ...
# so_peek_off.c:159:two_chunks_overlap_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_overlap_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_overlap_blocking
not ok 5 so_peek_off.stream.two_chunks_overlap_blocking
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
Miao Wang reported a bug of SO_PEEK_OFF on AF_UNIX SOCK_STREAM
socket.
The unexpected behaviour is triggered when the peek offset is
larger than the recv queue and the thread is unblocked by new
data.
Let's assume a socket which has "aaaa" in the recv queue and
the peek offset is 4.
First, unix_stream_read_generic() reads the offset 4 and skips
the skb(s) of "aaaa" with the code below:
skip = max(sk_peek_offset(sk, flags), 0); /* @skip is 4. */
do {
...
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
...
skb = skb_peek_next(skb, &sk->sk_receive_queue);
if (!skb)
goto again; /* @skip is 0. */
}
The thread jumps to the 'again' label and goes to sleep since
new data has not arrived yet.
Later, new data "bbbb" unblocks the thread, and the thread jumps
to the 'redo:' label to restart the entire process from the first
skb in the recv queue.
do {
...
redo:
...
last = skb = skb_peek(&sk->sk_receive_queue);
...
again:
if (skb == NULL) {
...
timeo = unix_stream_data_wait(sk, timeo, last,
last_len, freezable);
...
goto redo; /* @skip is 0 !! */
However, the peek offset is not reset in the path.
If the buffer size is 8, recv() will return "aaaabbbb" without
skipping any data, and the final offset will be 12 (the original
offset 4 + peeked skbs' length 8).
After sleeping in unix_stream_read_generic(), we have to fetch the
peek offset again.
Let's move the redo label before mutex_lock(&u->iolock).
Fixes: 9f389e35674f ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Reported-by: Miao Wang <shankerwangmiao@gmail.com> Closes: https://lore.kernel.org/netdev/3B969F90-F51F-4B9D-AB1A-994D9A54D460@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20251117174740.3684604-2-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pradyumn Rahar [Mon, 17 Nov 2025 12:16:08 +0000 (14:16 +0200)]
net/mlx5: Clean up only new IRQ glue on request_irq() failure
The mlx5_irq_alloc() function can inadvertently free the entire rmap
and end up in a crash[1] when the other threads tries to access this,
when request_irq() fails due to exhausted IRQ vectors. This commit
modifies the cleanup to remove only the specific IRQ mapping that was
just added.
This prevents removal of other valid mappings and ensures precise
cleanup of the failed IRQ allocation's associated glue object.
Note: This error is observed when both fwctl and rds configs are enabled.
[1]
mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1
mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to
request irq. err = -28
infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while
trying to test write-combining support
mlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1
mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to
request irq. err = -28
general protection fault, probably for non-canonical address
0xe277a58fde16f291: 0000 [#1] SMP NOPTI
Eric Dumazet [Mon, 17 Nov 2025 10:07:44 +0000 (10:07 +0000)]
mptcp: fix a race in mptcp_pm_del_add_timer()
mptcp_pm_del_add_timer() can call sk_stop_timer_sync(sk, &entry->add_timer)
while another might have free entry already, as reported by syzbot.
Add RCU protection to fix this issue.
Also change confusing add_timer variable with stop_timer boolean.
syzbot report:
BUG: KASAN: slab-use-after-free in __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616
Read of size 4 at addr ffff8880311e4150 by task kworker/1:1/44
1) Misc fixes for xfrm_state creation/modification/deletion.
Patchset from Sabrina Dubroca.
2) Fix inner packet family determination for xfrm offloads.
From Jianbo Liu.
3) Don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path. From Jianbo Liu.
4) Fix memory leaks in xfrm_add_acquire for policy offloads and policy
security contexts. From Zilin Guan.
* tag 'ipsec-2025-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: fix memory leak in xfrm_add_acquire()
xfrm: Prevent locally generated packets from direct output in tunnel mode
xfrm: Determine inner GSO type from packet inner protocol
xfrm: Check inner packet family directly from skb_dst
xfrm: check all hash buckets for leftover states during netns deletion
xfrm: set err and extack on failure to create pcpu SA
xfrm: call xfrm_dev_state_delete when xfrm_state_migrate fails to add the state
xfrm: make state as DEAD before final put when migrate fails
xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added
xfrm: drop SA reference in xfrm_state_update if dir doesn't match
====================
Shay Drory [Mon, 17 Nov 2025 12:05:49 +0000 (14:05 +0200)]
devlink: rate: Unset parent pointer in devl_rate_nodes_destroy
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
Grzegorz Nitka [Mon, 20 Oct 2025 10:02:16 +0000 (12:02 +0200)]
ice: fix PTP cleanup on driver removal in error path
Improve the cleanup on releasing PTP resources in error path.
The error case might happen either at the driver probe and PTP
feature initialization or on PTP restart (errors in reset handling, NVM
update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf
function) and 'ps_lock' mutex deinitialization were missed.
Additionally, ptp clock was not unregistered in the latter case.
Keep PTP state as 'uninitialized' on init to distinguish between error
scenarios and to avoid resource release duplication at driver removal.
The consequence of missing ice_ptp_cleanup_pf call is the following call
trace dumped when ice_adapter object is freed (port list is not empty,
as it is required at this stage):
Fixes: e800654e85b5 ("ice: Use ice_adapter for PTP shared data instead of auxdev") Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Arnd Bergmann [Tue, 18 Nov 2025 21:45:25 +0000 (22:45 +0100)]
Merge tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Regulator/supply fixes for a number of boards, removed too fast
cpu OPPs from rk3576 (not supported in newer vendor TF-A and never
supported in upstream TF-A). As well as some DTS validation fixes
and one pinctrl fix for the odroid-m1.
* tag 'v6.18-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5
arm64: dts: rockchip: disable HS400 on RK3588 Tiger
arm64: dts: rockchip: drop reset from rk3576 i2c9 node
arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2
arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2
arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1
arm64: dts: rockchip: Fix indentation on rk3399 haikou demo dtso
arm64: dts: rockchip: Make RK3588 GPU OPP table naming less generic
arm64: dts: rockchip: Drop 'rockchip,grf' prop from tsadc on rk3328
arm64: dts: rockchip: Remove non-functioning CPU OPPs from RK3576
arm64: dts: rockchip: Fix PCIe power enable pin for BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Set correct pinctrl for I2S1 8ch TX on odroid-m1
Current gu2host handler registered as MSI-X vector 0 and as per bspec for
a msix vector 0 interrupt, the driver must check the legacy registers
190008(TILE_INT_REG), 190060h (GT INTR Identity Reg 0) and other registers
mentioned in "Interrupt Service Routine Pseudocode" otherwise it will block
the next interrupts. To overcome this issue replacing guc2host handler
with legacy xe_irq_handler.
Fixes: da889070be7b2 ("drm/xe/irq: Separate MSI and MSI-X flows")
Bspec: 62357 Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Link: https://patch.msgid.link/20251107083141.2080189-1-venkata.ramana.nayana@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit c34a14bce7090862ebe5a64abe8d85df75e62737) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Shuicheng Lin [Mon, 10 Nov 2025 23:26:58 +0000 (23:26 +0000)]
drm/xe: Remove duplicate DRM_EXEC selection from Kconfig
There are 2 identical "select DRM_EXEC" lines for DRM_XE.
Remove one to clean up the configuration.
Fixes: d490ecf57790 ("drm/xe: Rework xe_exec and the VM rebind worker to use the drm_exec helper") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patch.msgid.link/20251110232657.1807998-2-shuicheng.lin@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit b1aa02acd03bfef3ed39c511d33c4a4303d2f9b1) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Matt Roper [Thu, 13 Nov 2025 23:40:39 +0000 (15:40 -0800)]
drm/xe/kunit: Fix forcewake assertion in mocs test
The MOCS kunit test calls KUNIT_ASSERT_TRUE_MSG() with a condition of
'true;' this prevents the assertion from ever failing. Replace
KUNIT_ASSERT_TRUE_MSG with KUNIT_FAIL_AND_ABORT to get the intended
failure behavior in cases where forcewake was not acquired successfully.
Fixes: 51c0ee84e4dc ("drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs") Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patch.msgid.link/20251113234038.2256106-2-matthew.d.roper@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 9be4f0f687048ba77428ceca11994676736507b7) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Shuicheng Lin [Wed, 12 Nov 2025 18:10:06 +0000 (18:10 +0000)]
drm/xe: Prevent BIT() overflow when handling invalid prefetch region
If user provides a large value (such as 0x80) for parameter
prefetch_mem_region_instance in vm_bind ioctl, it will cause
BIT(prefetch_region) overflow as below:
"
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in drivers/gpu/drm/xe/xe_vm.c:3414:7
shift exponent 128 is too large for 64-bit type 'long unsigned int'
CPU: 8 UID: 0 PID: 53120 Comm: xe_exec_system_ Tainted: G W 6.18.0-rc1-lgci-xe-kernel+ #200 PREEMPT(voluntary)
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
Call Trace:
<TASK>
dump_stack_lvl+0xa0/0xc0
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_shift_out_of_bounds+0x10e/0x170
? mutex_unlock+0x12/0x20
xe_vm_bind_ioctl.cold+0x20/0x3c [xe]
...
"
Fix it by validating prefetch_region before the BIT() usage.
v2: Add Closes and Cc stable kernels. (Matt)
Reported-by: Koen Koning <koen.koning@intel.com> Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6478 Cc: <stable@vger.kernel.org> # v6.8+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patch.msgid.link/20251112181005.2120521-2-shuicheng.lin@intel.com
(cherry picked from commit 8f565bdd14eec5611cc041dba4650e42ccdf71d9) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Linus Torvalds [Tue, 18 Nov 2025 18:02:22 +0000 (10:02 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running
without anything set until the first preemption of the vcpu
x86:
- Fix selftests failure on AMD, checking for an optimization that was
not happening anymore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix redundant updates of LBR MSR intercepts
KVM: arm64: VHE: Compute fgt traps before activating them
KVM: arm64: Finalize ID registers only once per VM
Robert McClinton [Sun, 16 Nov 2025 17:33:21 +0000 (12:33 -0500)]
drm/radeon: delete radeon_fence_process in is_signaled, no deadlock
Delete the attempt to progress the queue when checking if fence is
signaled. This avoids deadlock.
dma-fence_ops::signaled can be called with the fence lock in unknown
state. For radeon, the fence lock is also the wait queue lock. This can
cause a self deadlock when signaled() tries to make forward progress on
the wait queue. But advancing the queue is unneeded because incorrectly
returning false from signaled() is perfectly acceptable.
Link: https://github.com/brave/brave-browser/issues/49182 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4641 Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Robert McClinton <rbmccav@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 527ba26e50ec2ca2be9c7c82f3ad42998a75d0db) Cc: stable@vger.kernel.org
Fangzhi Zuo [Fri, 7 Nov 2025 20:01:30 +0000 (15:01 -0500)]
drm/amd/display: Fix pbn to kbps Conversion
[Why]
Existing routine has two conversion sequence,
pbn_to_kbps and kbps_to_pbn with margin.
Non of those has without-margin calculation.
kbps_to_pbn with margin conversion includes
fec overhead which has already been included in
pbn_div calculation with 0.994 factor considered.
It is a double counted fec overhead factor that causes
potential bw loss.
Ivan Lipski [Wed, 5 Nov 2025 20:27:42 +0000 (15:27 -0500)]
drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5
[Why]
On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and
cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5,
while it's still powered on, the cached cursor_state
(dpp_base->pos.cur0_ctl.bits.cur0_enable)
and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a
double cursor in full screen with non-native scaling.
[How]
Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673 Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79b3c037f972dcb13e325a8eabfb8da835764e15) Cc: stable@vger.kernel.org
Ivan Lipski [Thu, 30 Oct 2025 15:25:33 +0000 (11:25 -0400)]
drm/amd/display: Add an HPD filter for HDMI
[Why]
Some monitors perform rapid “autoscan” HPD re‑assertions right after a
disconnect or powersaving mode enablement. These appear as a quick
disconnect→reconnect with an identical EDID. Since Linux has no HDMI
hotplug detection (HPD) filter, these quick reconnects are seen as hotplug
events, which can unintentionally wake a system with DPMS off.
An example: https://gitlab.freedesktop.org/drm/amd/-/issues/2876
Such 'fake reconnects' are considered when the interval between a
disconnect and a connect is within 1500ms (experimentally chosen using
several monitors), and the two connections have the same EDID.
[How]
Implement a time-based debounce mechanism:
1. On HDMI disconnect detection, instead of immediately processing the
HPD event, save the current sink and schedule delayed work (default 1500ms)
2. If another HDMI disconnect HPD event arrives during the debounce period,
it reschedules the pending work, ensuring only the final state is processed.
3. When the debounce timer expires, re-detect the display and compare the
new sink with the cached one using EDID comparison.
4. If sinks match (same EDID), this was a spontaneous HPD toggle:
- Update connector state internally
- Skip hotplug event to prevent desktop rearrangement
If sinks differ, this was a real display change:
- Process normally with the hotplug event
The debounce delay is configurable via module parameter
'hdmi_hpd_debounce_delay_ms'.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2876 Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c918e75e1ed95be76f8e3156a411188f650fe03f)
[Why]
Empirical measurement of some monitors that fail to read EDID while
booting shows that the number of retries with a 30ms delay between
tries is as high as 16.
[How]
Increase number of retries to 20.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ad1c59ad7cf74ec06e32fe2c330ac1e957222288) Cc: stable@vger.kernel.org
Tomasz Pakuła [Mon, 3 Nov 2025 20:02:43 +0000 (21:02 +0100)]
HID: pidff: Fix needs_playback check
A small bug made it's way here when rewriting code to Linux quality.
Currently, if an effect is not infinite and a program requests it's
playback with the same number of loops, the play command won't be fired
and if an effect is infinite, the spam will continue.
We want every playback update for non-infinite effects and only some
for infinite (detecting when a program requests stop with 0 which will
be different than previous value which is usually 1 or 255).
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
drm/amd/display: Move sleep into each retry for retrieve_link_cap()
[Why]
When a monitor is booting it's possible that it isn't ready to retrieve
link caps and this can lead to an EDID read failure:
```
[drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed.
amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read.
```
[How]
Rather than msleep once and try a few times, msleep each time. Should
be no changes for existing working monitors, but should correct reading
caps on a monitor that is slow to boot.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 669dca37b3348a447db04bbdcbb3def94d5997cc) Cc: stable@vger.kernel.org
Naoki Ueki [Mon, 3 Nov 2025 12:16:45 +0000 (21:16 +0900)]
HID: elecom: Add support for ELECOM M-XT3URBK (018F)
The ELECOM M-XT3URBK trackball has an additional device ID (0x018F), which
shares the same report descriptor as the existing device (0x00FB). However,
the driver does not currently recognize this new ID, resulting in only five
buttons being functional.
This patch adds the new device ID so that all six buttons work properly.
Yosry Ahmed [Wed, 12 Nov 2025 01:30:17 +0000 (01:30 +0000)]
KVM: SVM: Fix redundant updates of LBR MSR intercepts
Don't update the LBR MSR intercept bitmaps if they're already up-to-date,
as unconditionally updating the intercepts forces KVM to recalculate the
MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are
functionally okay; however, they neuter an optimization in Hyper-V
nested virtualization enlightenments and this manifests as a self-test
failure.
In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e.
tell KVM that no changes were made to the MSR bitmap since the last VMRUN.
The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap
"without telling KVM about it" to verify that KVM honors the clean hint,
correctly fails because KVM notices the changed bitmap anyway:
==== Test Assertion Failure ====
x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081
pid=193558 tid=193558 errno=4 - Interrupted system call
1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659
2 0x0000000000406186: _vcpu_run at kvm_util.c:1699
3 (inlined by) vcpu_run at kvm_util.c:1710
4 0x0000000000401f2a: main at hyperv_svm_test.c:175
5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:?
6 0x000000000041f27c: __libc_start_main_impl at ??:?
7 0x00000000004021a0: _start at ??:?
vmcb->control.exit_code == SVM_EXIT_VMMCALL
Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments()
when svm_set_intercept_for_msr() performs a no-op change. changes to
the L0 MSR interception bitmap are only triggered by full CPUID updates
and MSR filter updates, both of which should be rare. Changing
svm_set_intercept_for_msr() risks hiding unintended pessimizations
like this one, and is actually more complex than this change.
Fixes: fbe5e5f030c2 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()") Cc: stable@vger.kernel.org Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev> Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev
[Rewritten commit message based on mailing list discussion. - Paolo] Reviewed-by: Sean Christopherson <seanjc@google.com> Tested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched
[why]
1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz
depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes,
gating DTBCLK causes the DP2 sink to lose its clock source.
2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk,
but gates DTBCLK when either pix_clk or ref_dtbclk is zero.
pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched,
which can lead to DTBCLK being gated by mistake.
[how]
Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK;
this is more accurate.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4701 Fixes: 5949e7c4890c ("drm/amd/display: Enable Dynamic DTBCLK Switch") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d04eb0c402780ca037b62a6aecf23b863545ebca) Cc: stable@vger.kernel.org
Paolo Bonzini [Tue, 18 Nov 2025 16:38:01 +0000 (17:38 +0100)]
Merge tag 'kvmarm-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.18, take #3
- Only adjust the ID registers when no irqchip has been created once
per VM run, instead of doing it once per vcpu, as this otherwise
triggers a pretty bad conbsistency check failure in the sysreg code.
- Make sure the per-vcpu Fine Grain Traps are computed before we load
the system registers on the HW, as we otherwise start running without
anything set until the first preemption of the vcpu.
Linus Torvalds [Tue, 18 Nov 2025 16:21:27 +0000 (08:21 -0800)]
mm/huge_memory: Fix initialization of huge zero folio
The recent fix to properly initialize the tags of the huge zero folio
had an unfortunate not-so-subtle side effect: it caused the actual
*contents* of the huge zero folio to not be initialized at all when the
hardware didn't support the memory tagging.
The reason was the unfortunate semantics of tag_clear_highpage(): on
hardware that didn't do the tagging, it would silently just not do
anything at all. And since this is done only on arm64 with MTE support,
that basically meant most hardware.
It wasn't necessarily immediately obvious since the huge zero page isn't
necessarily very heavily used - or because it might already be zero
because all-zeroes is the most common pattern. But it ends up causing
random odd user space failures when you do hit it.
The unfortunate semantics have been around for a while, but became a
real bug only when we started actively using __GFP_ZEROTAGS in the
generic get_huge_zero_folio() function - before that, it had only ever
been used in code that checked that the hardware supported it.
Fix this by simply changing the semantics of tag_clear_highpage() to
return whether it actually successfully did something or not. While at
it, also make it initialize multiple pages in one go, since that's
actually what the only caller wants it to do and it simplifies the whole
logic.
Fixes: adfb6609c680 ("mm/huge_memory: initialise the tags of the huge zero folio") Link: https://lore.kernel.org/all/20251117082023.90176-1-00107082@163.com/ Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org> Reported-and-tested-by: David Wang <00107082@163.com> Reported-and-tested-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PM: sleep: core: Fix runtime PM enabling in device_resume_early()
Runtime PM should only be enabled in device_resume_early() if it has
been disabled for the given device by device_suspend_late(). Otherwise,
it may cause runtime PM callbacks to run prematurely in some cases
which leads to further functional issues.
Make two changes to address this problem.
First, reorder device_suspend_late() to only disable runtime PM for a
device when it is going to look for the device's callback or if the
device is a "syscore" one. In all of the other cases, disabling runtime
PM for the device is not in fact necessary. However, if the device's
callback returns an error and the power.is_late_suspended flag is not
going to be set, enable runtime PM so it only remains disabled when
power.is_late_suspended is set.
Second, make device_resume_early() only enable runtime PM for the
devices with the power.is_late_suspended flag set.
Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous") Reported-by: Rose Wu <ya-jou.wu@mediatek.com> Closes: https://lore.kernel.org/linux-pm/70b25dca6f8c2756d78f076f4a7dee7edaaffc33.camel@mediatek.com/ Cc: 6.16+ <stable@vger.kernel.org> # 6.16+ Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/12784270.O9o76ZdvQC@rafael.j.wysocki
drm/i915/xe3: Restrict PTL intel_encoder_is_c10phy() to only PHY A
On PTL, no combo PHY is connected to PORT B. However, PORT B can
still be used for Type-C and will utilize the C20 PHY for eDP
over Type-C. In such configurations, VBTs also enumerate PORT B.
This leads to issues where PORT B is incorrectly identified as using the
C10 PHY, due to the assumption that returning true for PORT B in
intel_encoder_is_c10phy() would not cause problems.
From PTL's perspective, only PORT A/PHY A uses the C10 PHY.
Update the helper intel_encoder_is_c10phy() to return true only for
PORT A/PHY on PTL.
drm/i915/display: Add definition for wcl as subplatform
We will need to differentiate between WCL and PTL in
intel_encoder_is_c10phy(). Since WCL and PTL use the same display
architecture, let's define WCL as a subplatform of PTL to allow the
differentiation.
v2: Update commit message and reorder wcl define (Gustavo)
Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250922150317.2334680-3-dnyaneshwar.bhadane@intel.com
(cherry picked from commit 4dfaae643e59cf3ab71b88689dce1b874f036f00) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added Fixes tag when porting it to fixes]
drm/pcids: Split PTL pciids group to make wcl subplatform
To form the WCL platform as a subplatform of PTL in definition,
WCL pci ids are splited into saparate group from PTL.
So update the pciidlist struct to cover all the pci ids.
v2:
- Squash wcl description in single patch for display and xe.(jani,gustavo)
Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com
(cherry picked from commit 32620e176443bf23ec81bfe8f177c6721a904864) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added the Fixes tag when porting it to fixes]
Handle skb allocation failures in RX path, to avoid NULL pointer
dereference and RX stalls under memory pressure. If the refill fails
with -ENOMEM, complete napi polling and wake up later to retry via timer.
Also explicitly re-enable RX DMA after oom, so the dmac doesn't remain
stopped in this situation.
Previously, memory pressure could lead to skb allocation failures and
subsequent Oops like:
Steps to reproduce the issue:
1. Start a continuous network traffic, like scp of a 20GB file
2. Inject failslab errors using the kernel fault injection:
echo -1 > /sys/kernel/debug/failslab/times
echo 30 > /sys/kernel/debug/failslab/interval
echo 100 > /sys/kernel/debug/failslab/probability
3. After some time, traces start to appear, kernel Oopses
and the system stops
Step 2 is not always necessary, as it is usually already triggered by
the transfer of a big enough file.
Pavel Zhigulin [Thu, 13 Nov 2025 11:27:56 +0000 (14:27 +0300)]
net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()
The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate
over 'cqe->len_list[]' using only a zero-length terminator as
the stopping condition. If the terminator was missing or
malformed, the loop could run past the end of the fixed-size array.
Add an explicit bound check using ARRAY_SIZE() in both loops to prevent
a potential out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Randy Dunlap [Tue, 11 Nov 2025 06:09:34 +0000 (22:09 -0800)]
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
In file uncore-frequency/uncore-frequency-common.h,
correct all kernel-doc warnings by adding missing leading " *" to some
lines, adding a missing kernel-doc entry, and fixing a name typo.
Warning: uncore-frequency-common.h:50 bad line:
Storage for kobject attribute elc_low_threshold_percent
Warning: uncore-frequency-common.h:52 bad line:
Storage for kobject attribute elc_high_threshold_percent
Warning: uncore-frequency-common.h:54 bad line:
Storage for kobject attribute elc_high_threshold_enable
Warning: uncore-frequency-common.h:92 struct member
'min_freq_khz_kobj_attr' not described in 'uncore_data'
Warning: uncore-frequency-common.h:92 struct member
'die_id_kobj_attr' not described in 'uncore_data'
Fixes: 24b6616355f7 ("platform/x86/intel-uncore-freq: Add efficiency latency control to sysfs interface") Fixes: 416de0246f35 ("platform/x86: intel-uncore-freq: Fix types in sysfs callbacks") Fixes: 247b43fcd872 ("platform/x86/intel-uncore-freq: Add attributes to show die_id") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20251111060938.1998542-1-rdunlap@infradead.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Armin Wolf [Mon, 17 Nov 2025 15:59:38 +0000 (16:59 +0100)]
platform/x86: acer-wmi: Ignore backlight event
On the Acer Nitro AN515-58, the event 4 - 0 is send by the ACPI
firmware when the backlight up/down keys are pressed. Ignore this
event to avoid spamming the kernel log with error messages, as the
acpi-video driver already handles brightness up/down events.
Reported-by: Bugaddr <Bugaddr@protonmail.com> Closes: https://bugaddr.tech/posts/2025-11-16-debugging-the-acer-nitro-5-an515-58-fn-f10-keyboard-backlight-bug-on-linux/#wmi-interface-issues Tested-by: Bugaddr <Bugaddr@protonmail.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20251117155938.3030-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Haotian Zhang [Mon, 17 Nov 2025 03:33:54 +0000 (11:33 +0800)]
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
isst_if_probe() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is returned from the probe function as is but
probe functions should return normal errnos. A proper implementation
can be found in drivers/leds/leds-ss4200.c.
Convert PCIBIOS_* return codes using pcibios_err_to_errno() into
normal errno before returning.
Anthony Wong [Sun, 16 Nov 2025 18:53:11 +0000 (02:53 +0800)]
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
Add AWCC support to Alienware 16 Aurora
Cc: stable@vger.kernel.org Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com> Reviewed-by: Kurt Borja <kuurtb@gmail.com> Link: https://patch.msgid.link/20251116185311.18074-1-anthony.wong@canonical.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Lorenzo Bianconi [Thu, 13 Nov 2025 17:19:38 +0000 (18:19 +0100)]
net: airoha: Do not loopback traffic to GDM2 if it is available on the device
Airoha_eth driver forwards offloaded uplink traffic (packets received
on GDM1 and forwarded to GDM{3,4}) to GDM2 in order to apply hw QoS.
This is correct if the device does not support a dedicated GDM2 port.
In this case, in order to enable hw offloading for uplink traffic,
the packets should be sent to GDM{3,4} directly.
Ido Schimmel [Sun, 16 Nov 2025 08:10:29 +0000 (10:10 +0200)]
selftests: net: lib: Do not overwrite error messages
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally
from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.
After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'
frees it again.
Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.
Bug detected by the clang static analyzer.
Fixes: 0c0b20587b9f25a2 ("s390/ctcm: fix potential memory leak") Reviewed-by: Aswin Karuvally <aswin@linux.ibm.com> Signed-off-by: Aleksei Nikiforov <aleksei.nikiforov@linux.ibm.com> Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251112182724.1109474-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nam Cao [Mon, 17 Nov 2025 08:42:31 +0000 (08:42 +0000)]
nouveau/firmware: Add missing kfree() of nvkm_falcon_fw::boot
nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a
kmemleak warning.
Make sure this data is deallocated.
Fixes: 2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patch.msgid.link/20251117084231.2910561-1-namcao@linutronix.de
Linus Torvalds [Mon, 17 Nov 2025 17:11:27 +0000 (09:11 -0800)]
Merge tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix unitialized variable in statmount_string()
- Fix hostfs mounting when passing host root during boot
- Fix dynamic lookup to fail on cell lookup failure
- Fix missing file type when reading bfs inodes from disk
- Enforce checking of sb_min_blocksize() calls and update all callers
accordingly
- Restore write access before closing files opened by open_exec() in
binfmt_misc
- Always freeze efivarfs during suspend/hibernate cycles
- Fix statmount()'s and listmount()'s grab_requested_mnt_ns() helper to
actually allow mount namespace file descriptor in addition to mount
namespace ids
- Fix tmpfs remount when noswap is specified
- Switch Landlock to iput_not_last() to remove false-positives from
might_sleep() annotations in iput()
- Remove dead node_to_mnt_ns() code
- Ensure that per-queue kobjects are successfully created
* tag 'vfs-6.18-rc7.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
landlock: fix splats from iput() after it started calling might_sleep()
fs: add iput_not_last()
shmem: fix tmpfs reconfiguration (remount) when noswap is set
fs/namespace: correctly handle errors returned by grab_requested_mnt_ns
power: always freeze efivarfs
binfmt_misc: restore write access before closing files opened by open_exec()
block: add __must_check attribute to sb_min_blocksize()
virtio-fs: fix incorrect check for fsvq->kobj
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
mnt: Remove dead code which might prevent from building
bfs: Reconstruct file type when loading from disk
afs: Fix dynamic lookup to fail on cell lookup failure
hostfs: Fix only passing host root in boot stage with new mount
fs: Fix uninitialized 'offp' in statmount_string()
Linus Torvalds [Mon, 17 Nov 2025 17:01:22 +0000 (09:01 -0800)]
Merge tag 'sched_ext-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"Five fixes addressing PREEMPT_RT compatibility and locking issues.
Three commits fix potential deadlocks and sleeps in atomic contexts on
RT kernels by converting locks to raw spinlocks and ensuring IRQ work
runs in hard-irq context. The remaining two fix unsafe locking in the
debug dump path and a variable dereference typo"
* tag 'sched_ext-for-6.18-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize rq->scx.kick_cpus_irq_work
sched_ext: Fix possible deadlock in the deferred_irq_workfn()
sched/ext: convert scx_tasks_lock to raw spinlock
sched_ext: Fix unsafe locking in the scx_dump_state()
sched_ext: Fix use of uninitialized variable in scx_bpf_cpuperf_set()
Linus Torvalds [Mon, 17 Nov 2025 16:57:21 +0000 (08:57 -0800)]
Merge tag 'mtd/fixes-for-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Mostly small misc fixes, here they are sorted by sub-subsystem:
ECC fixes:
- Realtek Kconfig fix
SPI NAND fixes:
- Remove nonexistent QE bit on FMSH FM25S01A
Raw NAND fixes:
- Prevent DMA device NULL pointer dereference in Cadence driver
MTD device fixes:
- Possible integer overflow in read/write ioctls
- Fix the IRQ handler pointer in the onenand driver, even if in
practice it is never dereferenced.
* tag 'mtd/fixes-for-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: onenand: Pass correct pointer to IRQ handler
mtd: spinand: fmsh: remove QE bit for FM25S01A flash
mtd: rawnand: cadence: fix DMA device NULL pointer dereference
mtd: rawnand: realtek: Make rtl_ecc_engine_ops const
mtd: nand: MTD_NAND_ECC_REALTEK should depend on HAS_DMA
mtd: nand: realtek-ecc: Fix a IS_ERR() vs NULL bug in probe
mtdchar: fix integer overflow in read/write ioctls
Zqiang [Mon, 17 Nov 2025 12:53:10 +0000 (20:53 +0800)]
sched_ext: Use IRQ_WORK_INIT_HARD() to initialize rq->scx.kick_cpus_irq_work
For PREEMPT_RT kernels, the kick_cpus_irq_workfn() be invoked in
the per-cpu irq_work/* task context and there is no rcu-read critical
section to protect. this commit therefore use IRQ_WORK_INIT_HARD() to
initialize the per-cpu rq->scx.kick_cpus_irq_work in the
init_sched_ext_class().
projects / thirdparty / linux.git / log
