During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc27561f ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()") Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: stable@vger.kernel.org Fixes: 5f38ac54e605 ("drm/amd/pm: fix the high voltage and temperature issue") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given that ERROR_RECOVERY calls into PORT_RESET for Hi-Zing
the CC pins, setting CC pins to default state during PORT_RESET
breaks error recovery.
4.5.2.2.2.1 ErrorRecovery State Requirements
The port shall not drive VBUS or VCONN, and shall present a
high-impedance to ground (above zOPEN) on its CC1 and CC2 pins.
Hi-Zing the CC pins is the inteded behavior for PORT_RESET.
CC pins are set to default state after tErrorRecovery in
PORT_RESET_WAIT_OFF.
4.5.2.2.2.2 Exiting From ErrorRecovery State
A Sink shall transition to Unattached.SNK after tErrorRecovery.
A Source shall transition to Unattached.SRC after tErrorRecovery.
Cc: stable@vger.kernel.org Cc: Frank Wang <frank.wang@rock-chips.com> Fixes: 1e35f074399d ("usb: typec: tcpm: fix cc role at port reset") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240117114742.2587779-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB
Wireless M-Bus USB-adapter. It is used to read wireless water, gas and
electricity meters.
Signed-off-by: Leonard Dallmayr <leonard.dallmayr@mailbox.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the USB serial option driver support for the Fibocom
FM101-GL
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
The RODE NT-USB+ is marketed as a professional usb microphone, however the
usb audio interface is a mess:
[ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4
[ 1.503912] usb 1-5: config 1 has no interface number 4
[ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09
[ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.519697] usb 1-5: Product: RØDE NT-USB+
[ 1.519699] usb 1-5: Manufacturer: RØDE
[ 1.519700] usb 1-5: SerialNumber: 1D773A1A
[ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82
[ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82
[ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2
Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get.
I have asked Rode support to fix it, but they show no interest.
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Correct header file is needed for getting CLOSE_RANGE_* macros.
Previously it was tested with newer glibc which didn't show the need to
include the header which was a mistake.
The original code didn't update the firmware version if the
"next slot" of the AFI register isn't zero or if the
"current slot" field is zero; in those cases it assumed
that a reset was needed.
However, the NVMe specification doesn't exclude the possibility that
the "next slot" value is equal to the "current slot" value,
meaning that the same firmware slot will be activated after performing
a controller level reset; in this case a reset is clearly not
necessary and we can safely update the firmware version.
Modify the code so the kernel will report that a Controller Level Reset
is needed only in the following cases:
1) If the "current slot" field is zero. This is invalid and means that
something is wrong, a reset is needed.
or
2) if the "next slot" field isn't zero AND it's not equal to the
"current slot" value. This means that at the next reset a different
firmware slot will be activated.
Fixes: 983a338b96c8 ("nvme: update firmware version after commit") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The percpu area overflow_stacks is exported from arch/riscv/kernel/traps.c
for use in the entry code, but is not declared anywhere. Add the relevant
declaration to arch/riscv/include/asm/stacktrace.h to silence the following
sparse warning:
arch/riscv/kernel/traps.c:395:1: warning: symbol '__pcpu_scope_overflow_stack' was not declared. Should it be static?
We don't add the stackinfo_get_overflow() call as for some of the other
architectures as this doesn't seem to be used yet, so just silence the
warning.
The fscrypt code will use i_blkbits to setup ci_data_unit_bits when
allocating the new inode, but ceph will initiate i_blkbits ater when
filling the inode, which is too late. Since ci_data_unit_bits will only
be used by the fscrypt framework so initiating i_blkbits with
CEPH_FSCRYPT_BLOCK_SHIFT is safe.
Link: https://tracker.ceph.com/issues/64035 Fixes: 5b1188847180 ("fscrypt: support crypto data unit size less than filesystem block size") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A short read may occur while reading the message footer from the
socket. Later, when the socket is ready for another read, the
messenger invokes all read_partial_*() handlers, including
read_partial_sparse_msg_data(). The expectation is that
read_partial_sparse_msg_data() would bail, allowing the messenger to
invoke read_partial() for the footer and pick up where it left off.
However read_partial_sparse_msg_data() violates that and ends up
calling into the state machine in the OSD client. The sparse-read
state machine assumes that it's a new op and interprets some piece of
the footer as the sparse-read header and returns bogus extents/data
length, etc.
To determine whether read_partial_sparse_msg_data() should bail, let's
reuse cursor->total_resid. Because once it reaches to zero that means
all the extents and data have been successfully received in last read,
else it could break out when partially reading any of the extents and
data. And then osd_sparse_read() could continue where it left off.
[ idryomov: changelog ]
Link: https://tracker.ceph.com/issues/63586 Fixes: d396f89db39a ("libceph: add sparse read support to msgr1") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
These functions are supposed to behave like other read_partial_*()
handlers: the contract with messenger v1 is that the handler bails if
the area of the message it's responsible for is already processed.
This comes up when handling short reads from the socket.
[ idryomov: changelog ]
Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 8e46a2d068c9 ("libceph: just wait for more data to be available on the socket") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock
for waking up EH handler") intended to fix a hard lockup issue triggered by
EH. The core idea was to move scsi_host_busy() out of the host lock when
processing individual commands for EH. However, a suggested style change
inadvertently caused scsi_host_busy() to remain under the host lock. Fix
this by calling scsi_host_busy() outside the lock.
Fixes: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler") Cc: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The spare_init() calls memmap_populate() many times to create VA to PA
mapping for the VMEMMAP area, where all "struct page" are located once
CONFIG_SPARSEMEM_VMEMMAP is defined. These "struct page" are later
initialized in the zone_sizes_init() function. However, during this
process, no sfence.vma instruction is executed for this VMEMMAP area.
This omission may cause the hart to fail to perform page table walk
because some data related to the address translation is invisible to the
hart. To solve this issue, the local_flush_tlb_kernel_range() is called
right after the sparse_init() to execute a sfence.vma instruction for this
VMEMMAP area, ensuring that all data related to the address translation
is visible to the hart.
The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).
But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.
So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dennis Zhou <dennis@kernel.org>
Stable-dep-of: d9807d60c145 ("riscv: mm: execute local TLB flush after populating vmemmap") Signed-off-by: Sasha Levin <sashal@kernel.org>
The issue here is when this is called from ntfs_load_attr_list(). The
"size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow
on a 64bit systems but on 32bit systems the "+ 1023" can overflow and
the result is zero. This means that the kmalloc will succeed by
returning the ZERO_SIZE_PTR and then the memcpy() will crash with an
Oops on the next line.
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pipapo needs a scratchpad area to keep state during matching.
This state can be large and thus cannot reside on stack.
Each set preallocates percpu areas for this.
On each match stage, one scratchpad half starts with all-zero and the other
is inited to all-ones.
At the end of each stage, the half that starts with all-ones is
always zero. Before next field is tested, pointers to the two halves
are swapped, i.e. resmap pointer turns into fill pointer and vice versa.
After the last field has been processed, pipapo stashes the
index toggle in a percpu variable, with assumption that next packet
will start with the all-zero half and sets all bits in the other to 1.
This isn't reliable.
There can be multiple sets and we can't be sure that the upper
and lower half of all set scratch map is always in sync (lookups
can be conditional), so one set might have swapped, but other might
not have been queried.
Thus we need to keep the index per-set-and-cpu, just like the
scratchpad.
Note that this bug fix is incomplete, there is a related issue.
avx2 and normal implementation might use slightly different areas of the
map array space due to the avx2 alignment requirements, so
m->scratch (generic/fallback implementation) and ->scratch_aligned
(avx) may partially overlap. scratch and scratch_aligned are not distinct
objects, the latter is just the aligned address of the former.
After this change, write to scratch_align->map_index may write to
scratch->map, so this issue becomes more prominent, we can set to 1
a bit in the supposedly-all-zero area of scratch->map[].
A followup patch will remove the scratch_aligned and makes generic and
avx code use the same (aligned) area.
Its done in a separate change to ease review.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a timestamp field at the beginning of the transaction, store it
in the nftables per-netns area.
Update set backend .insert, .deactivate and sync gc path to use the
timestamp, this avoids that an element expires while control plane
transaction is still unfinished.
.lookup and .update, which are used from packet path, still use the
current time to check if the element has expired. And .get path and dump
also since this runs lockless under rcu read size lock. Then, there is
async gc which also needs to check the current time since it runs
asynchronously from a workqueue.
Fixes: c3e1b005ed1c ("netfilter: nf_tables: add set element timeout support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li <Roman.Li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
'panel_cntl' structure used to control the display panel could be null,
dereferencing it could lead to a null pointer access.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250)
Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun <yongqiang.sun@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32.
NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in
nla_policy is s16, see 3e48be05f3c7 ("netlink: add attribute range
validation to policy").
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.
This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.
Repeat the "real" / expected packet.
Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS") Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case devlink_rel_nested_in_notify_work() can not take the devlink
lock mutex. Convert the work to delayed work and in case of reschedule
do it jiffie later and avoid potential looping.
Suggested-by: Paolo Abeni <pabeni@redhat.com> Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240205171114.338679-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This forms a self-cyclic reference that GC should finally untangle
but does not due to lack of MSG_OOB handling, resulting in memory
leak.
Recently, commit 11498715f266 ("af_unix: Remove io_uring code for
GC.") removed io_uring's dead code in GC and revealed the problem.
The code was executed at the final stage of GC and unconditionally
moved all GC candidates from gc_candidates to gc_inflight_list.
That papered over the reported problem by always making the following
WARN_ON_ONCE(!list_empty(&gc_candidates)) false.
The problem has been there since commit 2aab4b969002 ("af_unix: fix
struct pid leaks in OOB support") added full scm support for MSG_OOB
while fixing another bug.
To fix this problem, we must call kfree_skb() for unix_sk(sk)->oob_skb
if the socket still exists in gc_candidates after purging collected skb.
Then, we need to set NULL to oob_skb before calling kfree_skb() because
it calls last fput() and triggers unix_release_sock(), where we call
duplicate kfree_skb(u->oob_skb) if not NULL.
Note that the leaked socket remained being linked to a global list, so
kmemleak also could not detect it. We need to check /proc/net/protocol
to notice the unfreed socket.
The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.
tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.
This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().
In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.
Address the issue using much larger write operations.
Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.
Fixes: 6bb382bcf742 ("selftests: add a selftest for big tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the counting of new acks and nacks when parsing a packet - something
that is used in congestion control.
As the code stands, it merely notes if there are any nacks whereas what we
really should do is compare the previous SACK table to the new one,
assuming we get two successive ACK packets with nacks in them. However, we
really don't want to do that if we can avoid it as the tables might not
correspond directly as one may be shifted from the other - something that
will only get harder to deal with once extended ACK tables come into full
use (with a capacity of up to 8192).
Instead, count the number of nacks shifted out of the old SACK, the number
of nacks retained in the portion still active and the number of new acks
and nacks in the new table then calculate what we need.
Note this ends up a bit of an estimate as the Rx protocol allows acks to be
withdrawn by the receiver and packets requested to be retransmitted.
Fixes: d57a3a151660 ("rxrpc: Save last ACK's SACK table rather than marking txbufs") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Stop rxrpc from sending a DUP ACK in response to a PING RESPONSE ACK on a
dead call. We may have initiated the ping but the call may have beaten the
response to completion.
Fixes: 18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the construction of delayed ACKs to not set the reference serial number
as they can't be used as an RTT reference.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number. This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.
However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.
Fix the generation of serial numbers to retry if it comes up with a zero.
Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The .compat section is a dummy PE section that contains the address of
the 32-bit entrypoint of the 64-bit kernel image if it is bootable from
32-bit firmware (i.e., CONFIG_EFI_MIXED=y)
This section is only 8 bytes in size and is only referenced from the
loader, and so it is placed at the end of the memory view of the image,
to avoid the need for padding it to 4k, which is required for sections
appearing in the middle of the image.
Unfortunately, this violates the PE/COFF spec, and even if most EFI
loaders will work correctly (including the Tianocore reference
implementation), PE loaders do exist that reject such images, on the
basis that both the file and memory views of the file contents should be
described by the section headers in a monotonically increasing manner
without leaving any gaps.
So reorganize the sections to avoid this issue. This results in a slight
padding overhead (< 4k) which can be avoided if desired by disabling
CONFIG_EFI_MIXED (which is only needed in rare cases these days)
This code prints the wrong variable in the warning message. It should
print "i" instead of "info->offset". On the first iteration "info" is
uninitialized leading to a crash and on subsequent iterations it prints
the previous offset instead of the current one.
Fixes: e0f74ed4634d ("i915/gvt: Separate the MMIO tracking table from GVT-g") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/11957c20-b178-4027-9b0a-e32e9591dd7c@moroto.mountain Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
inet_recv_error() is called without holding the socket lock.
IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning.
Fixes: f4713a3dfad0 ("net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before commit 7108b80a542b ("hwmon/coretemp: Handle large core ID
value"), there is a fixed mapping between
1. cpu_core_id
2. the index in pdata->core_data[] array
3. the sysfs attr name, aka "tempX_"
The later two always equal cpu_core_id + 2.
After the commit, pdata->core_data[] index is got from ida so that it
can handle sparse core ids and support more cores within a package.
However, the commit erroneously maps the sysfs attr name to
pdata->core_data[] index instead of cpu_core_id + 2.
As a result, the code is not aligned with the comments, and brings user
visible changes in hwmon sysfs on systems with sparse core id.
For example, before commit 7108b80a542b ("hwmon/coretemp: Handle large
core ID value"),
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon3/temp10_label:Core 8
/sys/class/hwmon/hwmon3/temp11_label:Core 9
after commit,
/sys/class/hwmon/hwmon2/temp2_label:Core 0
/sys/class/hwmon/hwmon2/temp3_label:Core 1
/sys/class/hwmon/hwmon2/temp4_label:Core 2
/sys/class/hwmon/hwmon2/temp5_label:Core 3
/sys/class/hwmon/hwmon2/temp6_label:Core 4
/sys/class/hwmon/hwmon2/temp7_label:Core 8
/sys/class/hwmon/hwmon2/temp8_label:Core 9
Restore the previous behavior and rework the code, comments and variable
names to avoid future confusions.
When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be
freed to prevent memleak.
Fixes: c9c12d339d93 ("octeontx2-pf: Add support for PTP clock") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the ICMPv6 error is built from a non-linear skb we get the following
splat,
BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
Read of size 4 at addr ffff88811d402c80 by task netperf/820
CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
...
kasan_report+0xd8/0x110
do_csum+0x220/0x240
csum_partial+0xc/0x20
skb_tunnel_check_pmtu+0xeb9/0x3280
vxlan_xmit_one+0x14c2/0x4080
vxlan_xmit+0xf61/0x5c00
dev_hard_start_xmit+0xfb/0x510
__dev_queue_xmit+0x7cd/0x32a0
br_dev_queue_push_xmit+0x39d/0x6a0
Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs.
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is
done by xdp_convert_buff_to_frame(). The memory type of the resulting
xdp_frame depends on the memory type of the xdp_buff. For page pool
based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces
xdp_frame with memory type MEM_TYPE_PAGE_ORDER0.
tsnep_xdp_xmit_back() is not prepared for that and uses always the page
pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings
and the transmission of undefined data.
Improve tsnep_xdp_xmit_back() to use the generic buffer type
TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX.
Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.
Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked
Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.
The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.
Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.
Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.
The patch set [1] added a general lib.sh in net selftests, and converted
several test scripts to source the lib.sh.
unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2])
have a /bin/sh shebang which may point to various shells in different
distributions, but "source" is only available in some of them. For
example, "source" is a built-it function in bash, but it cannot be
used in dash.
Refer to other scripts that were converted together, simply change the
shebang to bash to fix the following issues when the default /bin/sh
points to other shells.
not ok 51 selftests: net: unicast_extensions.sh # exit=1
v1 -> v2:
- Fix pmtu.sh which has the same issue as unicast_extensions.sh,
suggested by Hangbin
- Change the style of the "source" line to be consistent with other
tests, suggested by Hangbin
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh
Here is the test result after conversion.
# ./pmtu.sh
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
TEST: ipv6: PMTU exceptions [ OK ]
TEST: ipv6: PMTU exceptions - nexthop objects [ OK ]
...
TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv6: list and flush cached exceptions [ OK ]
TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ]
TEST: ipv4: PMTU exception w/route replace [ OK ]
TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ]
TEST: ipv6: PMTU exception w/route replace [ OK ]
TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: e71e016ad0f6 ("selftests: net: fix tcp listener handling in pmtu.sh") Signed-off-by: Sasha Levin <sashal@kernel.org>
The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.
Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.
Tested with:
for I in $(seq 1 100); do
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:udpgro_fwd.sh || exit -1
done
Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes
for PTP HWTS ring but then generic aq_ring_free() does not take this
into account.
Create and use a specific function to free HWTS ring to fix this
issue.
After commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct
cfg80211_scan_request with __counted_by"), the compiler may enforce
dynamic array indexing of req->channels to stay below n_channels. As a
result, n_channels needs to be increased _before_ accessing the newly
added array index. Increment it first, then use "i" for the prior index.
Solves this warning in the coming GCC that has __counted_by support:
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info':
../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req->
n_channels' may be undefined [-Wsequence-point]
3783 | req->channels[req->n_channels++] = chan;
| ~~~~~~~~~~~~~~~^~
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Ian Lin <ian.lin@infineon.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Hector Martin <marcan@marcan.st> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126223150.work.548-kees@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the driver exits eSR by calling
iwl_mvm_esr_mode_inactive() before updating the FW
(by deactivating one of the links), and therefore before
sending the EML frame notifying that we are no longer in eSR.
This is wrong for several reasons:
1. The driver sends SMPS activation frames when we are still in eSR
and SMPS should be disabled when in eSR
2. The driver restores RLC configuration as it was before eSR
entering, and RLC command shouldn't be sent in eSR
Fix this by calling iwl_mvm_esr_mode_inactive() after FW update
There's a bug in ieee80211_set_unsol_bcast_probe_resp(), it tries
to return BSS_CHANGED_UNSOL_BCAST_PROBE_RESP (which has the value
1<<31) in an int, which makes it negative and considered an error.
Fix this by passing the changed flags to set separately.
As mentioned in the previous commit, we pretty quickly found
that some APs have ECSA elements stuck in their probe response,
so using that to not attempt to connect while CSA is happening
we never connect to such an AP.
Improve this situation by checking more carefully and ignoring
the ECSA if cfg80211 has previously detected the ECSA element
being stuck in the probe response.
Additionally, allow connecting to an AP that's switching to a
channel it's already using, unless it's using quiet mode. In
this case, we may just have to adjust bandwidth later. If it's
actually switching channels, it's better not to try to connect
in the middle of that.
Reported-by: coldolt <andypalmadi@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129131413.cc2d0a26226e.I682c016af76e35b6c47007db50e8554c5a426910@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We recently added some validation that we don't try to
connect to an AP that is currently in a channel switch
process, since that might want the channel to be quiet
or we might not be able to connect in time to hear the
switching in a beacon. This was in commit c09c4f31998b
("wifi: mac80211: don't connect to an AP while it's in
a CSA process").
However, we promptly got a report that this caused new
connection failures, and it turns out that the AP that
we now cannot connect to is permanently advertising an
extended channel switch announcement, even with quiet.
The AP in question was an Asus RT-AC53, with firmware
3.0.0.4.380_10760-g21a5898.
As a first step, attempt to detect that we're dealing
with such a situation, so mac80211 can use this later.
Reported-by: coldolt <andypalmadi@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAJvGw+DQhBk_mHXeu6RTOds5iramMW2FbMB01VbKRA4YbHHDTA@mail.gmail.com/ Fixes: c09c4f31998b ("wifi: mac80211: don't connect to an AP while it's in a CSA process") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240129131413.246972c8775e.Ibf834d7f52f9951a353b6872383da710a7358338@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When doing a channel switch, cfg80211_update_known_bss may be called
with a BSS where both proberesp_ies and beacon_ies is set. If that
happens, both need to be consumed.
Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register.
Fixes: 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The EFI stub's kernel placement logic randomizes the physical placement
of the kernel by taking all available memory into account, and picking a
region at random, based on a random seed.
When KASLR is disabled, this seed is set to 0x0, and this results in the
lowest available region of memory to be selected for loading the kernel,
even if this is below LOAD_PHYSICAL_ADDR. Some of this memory is
typically reserved for the GFP_DMA region, to accommodate masters that
can only access the first 16 MiB of system memory.
Even if such devices are rare these days, we may still end up with a
warning in the kernel log, as reported by Tom:
The recently introduced EFI memory attributes protocol should be used
if it exists to ensure that the memory allocation created for the kernel
permits execution. This is needed for compatibility with tightened
requirements related to Windows logo certification for x86 PCs.
Currently, we simply strip the execute protect (XP) attribute from the
entire range, but this might be rejected under some firmware security
policies, and so in a subsequent patch, this will be changed to only
strip XP from the executable region that runs early, and make it
read-only (RO) as well.
In order to catch any issues early, ensure that the memory attribute
protocol works as intended, and give up if it produces spurious errors.
Note that the DXE services based fallback was always based on best
effort, so don't propagate any errors returned by that API.
The function to add an interface may be called without a previous
removal if the HW is being reconfigured. As such, only add the symlink
if the hardware is not being reconfigured due to a HW_RESTART.
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/574878/ Link: https://lore.kernel.org/r/20240117194109.21609-1-quic_abhinavk@quicinc.com Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field.
dp_link_get_colorimetry_config() returns wrong colorimetry value
in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation.
Hence fix this problem by having dp_link_get_colorimetry_config()
return defined CEA RGB colorimetry value in the case of
DP_TEST_DYNAMIC_RANGE_CEA.
Changes in V2:
-- drop retrieving colorimetry from colorspace
-- drop dr = link->dp_link.test_video.test_dyn_range assignment
Changes in V3:
-- move defined MISCr0a Colorimetry vale to dp_reg.h
-- rewording commit title
-- rewording commit text to more precise describe this patch
Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the
BPC unknown case, the additional shift causes spill over to the other
bits of the [DP_CONFIGURATION_CTRL] register.
Fix this by changing the return value of dp_link_get_test_bits_depth()
in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT).
After the interface selection policy change to do a weighted
round robin, each iface maintains a weight_fulfilled. When the
weight_fulfilled reaches the total weight for the iface, we know
that the weights can be reset and ifaces can be allocated from
scratch again.
During channel allocation failures on a particular channel,
weight_fulfilled is not incremented. If a few interfaces are
inactive, we could end up in a situation where the active
interfaces are all allocated for the total_weight, and inactive
ones are all that remain. This can cause a situation where
no more channels can be allocated further.
This change fixes it by increasing weight_fulfilled, even when
channel allocation failure happens. This could mean that if
there are temporary failures in channel allocation, the iface
weights may not strictly be adhered to. But that's still okay.
Fixes: a6d8fb54a515 ("cifs: distribute channels across interfaces based on speed") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the server reports query network interface info call
as unsupported following a tree connect, it means that
multichannel is unsupported, even if the server capabilities
report otherwise.
When this happens, cifs_chan_skip_or_disable is called to
disable multichannel on the client. However, we only need
to call this when multichannel is currently setup.
Fixes: f591062bdbf4 ("cifs: handle servers that still advertise multichannel after disabling") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the external phy working together with phy-omap-usb2 does not implement
send_srp(), we may still attempt to call it. This can happen on an idle
Ethernet gadget triggering a wakeup for example:
configfs-gadget.g1 gadget.0: ECM Suspend
configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup
...
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute
...
PC is at 0x0
LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc]
...
musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core]
usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether]
eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c
dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4
sch_direct_xmit from __dev_queue_xmit+0x334/0xd88
__dev_queue_xmit from arp_solicit+0xf0/0x268
arp_solicit from neigh_probe+0x54/0x7c
neigh_probe from __neigh_event_send+0x22c/0x47c
__neigh_event_send from neigh_resolve_output+0x14c/0x1c0
neigh_resolve_output from ip_finish_output2+0x1c8/0x628
ip_finish_output2 from ip_send_skb+0x40/0xd8
ip_send_skb from udp_send_skb+0x124/0x340
udp_send_skb from udp_sendmsg+0x780/0x984
udp_sendmsg from __sys_sendto+0xd8/0x158
__sys_sendto from ret_fast_syscall+0x0/0x58
Let's fix the issue by checking for send_srp() and set_vbus() before
calling them. For USB peripheral only cases these both could be NULL.
Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa040244a3b17 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa040244a3b17 ("perf parse-events: Wildcard most "numeric" events") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: James Clark <james.clark@arm.com>
[ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ] Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ian Rogers <irogers@google.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yang Jihong <yangjihong1@huawei.com> Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/ Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a0eaf8c ("perf addr_location: Add init/exit/copy functions") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20240125100351.936262-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ben Gainey <ben.gainey@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 2dac1f089add ("perf test: Fix 'perf script' tests on s390") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018")
noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses
separate serdes init sequence for IPQ6018. Since already existing IPQ9574
serdes init sequence is identical, just reuse it and fix failing USB3 mode
in IPQ6018.
Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
introduced register offsets to the driver but for ipq8074/ipq6018 they do
not match what was in the old style device tree. Example from old
ipq6018.dtsi:
Propagate the TR response status to the device using BCDMA
split-channels. For example CSI-RX driver should be able to check if a
frame was not transferred completely (short packet) and needs to be
discarded.
Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Jai Luthra <j-luthra@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20240103-tr_resp_err-v1-1-2fdf6d48ab92@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of long format of qDMA command descriptor, there are one frame
descriptor, three entries in the frame list and two data entries. So the
size of dma_pool_create for these three fields should be the same with
the total size of entries respectively, or the contents may be overwritten
by the next allocated descriptor.
This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant
mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on
code in mb_free_blocks(), fast commit replay can end up marking as free
blocks that are already marked as such. This causes corruption of the
buddy bitmap so we need to regenerate it in that case.
Reported-by: Jan Kara <jack@suse.cz> Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: fac4ebd79fed ("drm/amdgpu: Fix with right return code '-EIO' in 'amdgpu_gmc_vram_checking()'") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PA gain can be set in steps of 1.5 dB from -3 dB to 18 dB, that is,
in 15 levels.
Fix the dB values for the PA volume control as experiments using wsa8835
show that the first 16 levels all map to the same lowest gain while the
last three map to the highest gain.
These values specifically need to be correct for the sound server to
provide proper volume control.
Note that level 0 (-3 dB) does not mute the PA so the mute flag should
also not be set.
Fixes: cdb09e623143 ("ASoC: codecs: wsa883x: add control, dapm widgets and map") Cc: stable@vger.kernel.org # 6.0 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://msgid.link/r/20240119112420.7446-2-johan+linaro@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The LPASS WSA macro codec driver is updating the digital gain settings
behind the back of user space on DAPM events if companding has been
enabled.
As compander control is exported to user space, this can result in the
digital gain setting being incremented (or decremented) every time the
sound server is started and the codec suspended depending on what the
UCM configuration looks like.
Soon enough playback will become distorted (or too quiet).
This is specifically a problem on the Lenovo ThinkPad X13s as this
bypasses the limit for the digital gain setting that has been set by the
machine driver.
Fix this by simply dropping the compander gain offset hack. If someone
cares about modelling the impact of the compander setting this can
possibly be done by exporting it as a volume control later.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Cc: stable@vger.kernel.org # 5.11 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://msgid.link/r/20240119112420.7446-4-johan+linaro@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lowest headphones volume setting does not mute so the leave the TLV
mute flag unset.
This is specifically needed to let the sound server use the lowest gain
setting.
Fixes: c03226ba15fe ("ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR") Cc: <stable@vger.kernel.org> # 6.5 Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://msgid.link/r/20240122091130.27463-1-johan+linaro@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
