Currently there is a bound check missing in the dbAdjTree while
accessing the dmt_stree. To add the required check added the bool is_ctl
which is required to determine the size as suggest in the following
commit.
https://lore.kernel.org/linux-kernel-mentees/f9475918-2186-49b8-b801-6f0f9e75f4fa@oracle.com/
The issue is caused when the value of fsi becomes less than -1.
The check to break the loop when fsi value becomes -1 is present
but syzbot was able to produce value less than -1 which cause the error.
This patch simply add the change for the values less than 0.
The patch is tested via syzbot.
Reported-and-tested-by: syzbot+d4b1df2e9d4ded6488ec@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d4b1df2e9d4ded6488ec Signed-off-by: Osama Muhammad <osmtendev@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6
index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]')
CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867
dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834
dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331
dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline]
dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402
txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534
txUpdateMap+0x342/0x9e0
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732
kthread+0x2d3/0x370 kernel/kthread.c:388
ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
================================================================================
Kernel panic - not syncing: UBSAN: panic_on_warn set ...
CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
panic+0x30f/0x770 kernel/panic.c:340
check_panic_on_warn+0x82/0xa0 kernel/panic.c:236
ubsan_epilogue lib/ubsan.c:223 [inline]
__ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348
dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867
dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834
dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331
dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline]
dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402
txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534
txUpdateMap+0x342/0x9e0
txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline]
jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732
kthread+0x2d3/0x370 kernel/kthread.c:388
ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
Kernel Offset: disabled
Rebooting in 86400 seconds..
The issue is caused when the value of lp becomes greater than
CTLTREESIZE which is the max size of stree. Adding a simple check
solves this issue.
Dave:
As the function returns a void, good error handling
would require a more intrusive code reorganization, so I modified
Osama's patch at use WARN_ON_ONCE for lack of a cleaner option.
The patch is tested via syzbot.
Reported-by: syzbot+39ba34a099ac2e9bd3cb@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=39ba34a099ac2e9bd3cb Signed-off-by: Osama Muhammad <osmtendev@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are 3 synchronization issues with thermal zone suspend-resume
during system-wide transitions:
1. The resume code runs in a PM notifier which is invoked after user
space has been thawed, so it can run concurrently with user space
which can trigger a thermal zone device removal. If that happens,
the thermal zone resume code may use a stale pointer to the next
list element and crash, because it does not hold thermal_list_lock
while walking thermal_tz_list.
2. The thermal zone resume code calls thermal_zone_device_init()
outside the zone lock, so user space or an update triggered by
the platform firmware may see an inconsistent state of a
thermal zone leading to unexpected behavior.
3. Clearing the in_suspend global variable in thermal_pm_notify()
allows __thermal_zone_device_update() to continue for all thermal
zones and it may as well run before the thermal_tz_list walk (or
at any point during the list walk for that matter) and attempt to
operate on a thermal zone that has not been resumed yet. It may
also race destructively with thermal_zone_device_init().
To address these issues, add thermal_list_lock locking to
thermal_pm_notify(), especially arount the thermal_tz_list,
make it call thermal_zone_device_init() back-to-back with
__thermal_zone_device_update() under the zone lock and replace
in_suspend with per-zone bool "suspend" indicators set and unset
under the given zone's lock.
There are two major types of uncorrected recoverable (UCR) errors :
- Synchronous error: The error is detected and raised at the point of
the consumption in the execution flow, e.g. when a CPU tries to
access a poisoned cache line. The CPU will take a synchronous error
exception such as Synchronous External Abort (SEA) on Arm64 and
Machine Check Exception (MCE) on X86. OS requires to take action (for
example, offline failure page/kill failure thread) to recover this
uncorrectable error.
- Asynchronous error: The error is detected out of processor execution
context, e.g. when an error is detected by a background scrubber.
Some data in the memory are corrupted. But the data have not been
consumed. OS is optional to take action to recover this uncorrectable
error.
When APEI firmware first is enabled, a platform may describe one error
source for the handling of synchronous errors (e.g. MCE or SEA notification
), or for handling asynchronous errors (e.g. SCI or External Interrupt
notification). In other words, we can distinguish synchronous errors by
APEI notification. For synchronous errors, kernel will kill the current
process which accessing the poisoned page by sending SIGBUS with
BUS_MCEERR_AR. In addition, for asynchronous errors, kernel will notify the
process who owns the poisoned page by sending SIGBUS with BUS_MCEERR_AO in
early kill mode. However, the GHES driver always sets mf_flags to 0 so that
all synchronous errors are handled as asynchronous errors in memory failure.
To this end, set memory failure flags as MF_ACTION_REQUIRED on synchronous
events.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Tested-by: Ma Wupeng <mawupeng1@huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xiaofei Tan <tanxiaofei@huawei.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a chance if a frequent switch of the governor
done in a loop result in timer list corruption where
timer cancel being done from two place one from
cancel_delayed_work_sync() and followed by expire_timers()
can be seen from the traces[1].
while true
do
echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor
echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor
done
It looks to be issue with devfreq driver where
device_monitor_[start/stop] need to synchronized so that
delayed work should get corrupted while it is either
being queued or running or being cancelled.
Let's use polling flag and devfreq lock to synchronize the
queueing the timer instance twice and work data being
corrupted.
Add parsing of attributes as diagnostic data. Fixes issue with test plan
being parsed incorrectly as diagnostic data when located after
suite-level attributes.
Note that if there does not exist a test plan line, the diagnostic lines
between the suite header and the first result will be saved in the suite
log rather than the first test case log.
Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The for loop does not iterate over the last element of the node_to_pxm_map
array. This could lead to a conflict between the final fake_pxm value and
the existing pxm values. That is, the final fake_pxm value can not be
guaranteed to be an unused pxm value.
While at it, fix up white space in slit_valid().
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Center-align all possible status reports.
Before OK and FAIL were center-aligned in relation to each other but
SKIPPED and FAILED would be left-aligned.
The gcc plugin -fanalyzer [1] tries to detect various
patterns of incorrect behaviour. The tool reports:
drivers/acpi/acpi_extlog.c: In function ‘extlog_exit’:
drivers/acpi/acpi_extlog.c:307:12: warning: check of ‘extlog_l1_addr’ for NULL after already dereferencing it [-Wanalyzer-deref-before-check]
|
| 306 | ((struct extlog_l1_head *)extlog_l1_addr)->flags &= ~FLAG_OS_OPTIN;
| | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
| | |
| | (1) pointer ‘extlog_l1_addr’ is dereferenced here
| 307 | if (extlog_l1_addr)
| | ~
| | |
| | (2) pointer ‘extlog_l1_addr’ is checked for NULL here but it was already dereferenced at (1)
|
Fix the NULL pointer dereference check in extlog_exit().
When compiling with gcc version 14.0.0 20231126 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following:
In file included from ./include/linux/string.h:295,
from ./include/linux/bitmap.h:12,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:7,
from ./include/linux/slab.h:16,
from ./include/linux/resource_ext.h:11,
from ./include/linux/acpi.h:13,
from drivers/pnp/pnpacpi/rsparser.c:11:
In function 'fortify_memcpy_chk',
inlined from 'pnpacpi_parse_allocated_vendor' at drivers/pnp/pnpacpi/rsparser.c:158:3,
inlined from 'pnpacpi_allocated_resource' at drivers/pnp/pnpacpi/rsparser.c:249:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
According to the comments in include/linux/fortify-string.h, 'memcpy()',
'memmove()' and 'memset()' must not be used beyond individual struct
members to ensure that the compiler can enforce protection against
buffer overflows, and, IIUC, this also applies to partial copies from
the particular member ('vendor->byte_data' in this case). So it should
be better (and safer) to do both copies at once (and 'byte_data' of
'struct acpi_resource_vendor_typed' seems to be a good candidate for
'__counted_by(byte_length)' as well).
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Colorful X15 AT 23 ACPI video-bus device report spurious
ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE
events being reported to userspace (and causing trouble there) when
an external screen plugged in.
Add a quirk setting the report_key_events mask to
REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE
events will be ignored, while still reporting brightness up/down
hotkey-presses to userspace normally.
Signed-off-by: Yuluo Qiu <qyl27@outlook.com> Co-developed-by: Celeste Liu <CoelacanthusHex@gmail.com> Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When auditd_set sets the auditd_conn pointer, audit messages can
immediately be put on the socket by other kernel threads. If the backlog
is large or the rate is high, this can immediately fill the socket
buffer. If the audit daemon requested an ACK for this operation, a full
socket buffer causes the ACK to get dropped, also setting ENOBUFS on the
socket.
To avoid this race and ensure ACKs get through, fast-track the ACK in
this specific case to ensure it is sent before auditd_conn is set.
Signed-off-by: Chris Riches <chris.riches@nutanix.com>
[PM: fix some tab vs space damage] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The use_count of a regulator should only be incremented when the
enable_count changes from 0 to 1. Similarly, the use_count should
only be decremented when the enable_count changes from 1 to 0.
In the previous implementation, use_count was sometimes decremented
to 0 when some consumer called unbalanced disable,
leading to unexpected disable even the regulator is enabled by
other consumers. With this change, the use_count accurately reflects
the number of users which the regulator is enabled.
This should make things more robust in the case where a consumer does
leak references.
After release of the hashbucket lock the tracking object can be modified or
freed by a concurrent thread. Using it in such a case is error prone, even
for printing the object state:
1. T1 tries to deactivate destroyed object, debugobjects detects it,
hash bucket lock is released.
2. T2 preempts T1 and frees the tracking object.
3. The freed tracking object is allocated and initialized for a
different to be tracked kernel object.
4. T1 resumes and reports error for wrong kernel object.
Create a local copy of the tracking object before releasing the hash bucket
lock and use the local copy for reporting and fixups to prevent this.
Memory errors don't happen very often, especially fatal ones. However,
in large-scale scenarios such as data centers, that probability
increases with the amount of machines present.
When a fatal machine check happens, mce_panic() is called based on the
severity grading of that error. The page containing the error is not
marked as poison.
However, when kexec is enabled, tools like makedumpfile understand when
pages are marked as poison and do not touch them so as not to cause
a fatal machine check exception again while dumping the previous
kernel's memory.
Therefore, mark the page containing the error as poisoned so that the
kexec'ed kernel can avoid accessing the page.
[ bp: Rewrite commit message and comment. ]
Co-developed-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Zhiquan Li <zhiquan1.li@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Link: https://lore.kernel.org/r/20231014051754.3759099-1-zhiquan1.li@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Some of the fp/vmx code in sstep.c assume a certain maximum size for the
instructions being emulated. The size of those operations however is
determined separately in analyse_instr().
Add a check to validate the assumption on the maximum size of the
operations, so as to prevent any unintended kernel stack corruption.
Signed-off-by: Naveen N Rao <naveen@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231123071705.397625-1-naveen@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The linux-next build of powerpc64 allnoconfig fails with:
arch/powerpc/mm/book3s64/pgtable.c:557:5: error: no previous prototype for 'pmd_move_must_withdraw'
557 | int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
| ^~~~~~~~~~~~~~~~~~~~~~
Caused by commit:
c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally")
Fix it by moving the function definition under
CONFIG_TRANSPARENT_HUGEPAGE like the prototype. The function is only
called when CONFIG_TRANSPARENT_HUGEPAGE=y.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Flesh out change log from linux-next patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231127132809.45c2b398@canb.auug.org.au Signed-off-by: Sasha Levin <sashal@kernel.org>
When there are two racing NMIs on x86, the first NMI invokes NMI handler and
the 2nd NMI is latched until IRET is executed.
If panic on NMI and panic kexec are enabled, the first NMI triggers
panic and starts booting the next kernel via kexec. Note that the 2nd
NMI is still latched. During the early boot of the next kernel, once
an IRET is executed as a result of a page fault, then the 2nd NMI is
unlatched and invokes the NMI handler.
However, NMI handler is not set up at the early stage of boot, which
results in a boot failure.
Avoid such problems by setting up a NOP handler for early NMIs.
[ mingo: Refined the changelog. ]
Signed-off-by: Jun'ichi Nomura <junichi.nomura@nec.com> Signed-off-by: Derek Barbosa <debarbos@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/powerpc/mm/book3s64/pgtable.c:275:15: error: no previous prototype for ‘create_section_mapping’ [-Werror=missing-prototypes]
275 | int __meminit create_section_mapping(unsigned long start, unsigned long end,
| ^~~~~~~~~~~~~~~~~~~~~~
That happens because the prototype for create_section_mapping() is in
asm/mmzone.h, but asm/mmzone.h is only included by linux/mmzone.h
when CONFIG_NUMA=y.
In fact the prototype is only needed by arch/powerpc/mm code, so move
the prototype into arch/powerpc/mm/mmu_decl.h, which also fixes the
build error.
With NUMA=n and FA_DUMP=y or PRESERVE_FA_DUMP=y the build fails with:
arch/powerpc/kernel/fadump.c:1739:22: error: no previous prototype for ‘arch_reserved_kernel_pages’ [-Werror=missing-prototypes]
1739 | unsigned long __init arch_reserved_kernel_pages(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
The prototype for arch_reserved_kernel_pages() is in include/linux/mm.h,
but it's guarded by __HAVE_ARCH_RESERVED_KERNEL_PAGES. The powerpc
headers define __HAVE_ARCH_RESERVED_KERNEL_PAGES in asm/mmzone.h, which
is not included into the generic headers when NUMA=n.
Move the definition of __HAVE_ARCH_RESERVED_KERNEL_PAGES into asm/mmu.h
which is included regardless of NUMA=n.
Additionally the ifdef around __HAVE_ARCH_RESERVED_KERNEL_PAGES needs to
also check for CONFIG_PRESERVE_FA_DUMP.
arch/powerpc/kernel/traps.c:1442:5: error: no previous prototype for ‘is_valid_bugaddr’ [-Werror=missing-prototypes]
1442 | int is_valid_bugaddr(unsigned long addr)
| ^~~~~~~~~~~~~~~~
The prototype is only defined, and the function is only needed, when
CONFIG_GENERIC_BUG=y, so move the implementation under that.
The SW_INCR event is somewhat unusual, and depends on the specific HW
counter that it is programmed into. When programmed into PMEVCNTR<n>,
SW_INCR will count any writes to PMSWINC_EL0 with bit n set, ignoring
writes to SW_INCR with bit n clear.
Event rotation means that there's no fixed relationship between
perf_events and HW counters, so this isn't all that useful.
Further, we program PMUSERENR.{SW,EN}=={0,0}, which causes EL0 writes to
PMSWINC_EL0 to be trapped and handled as UNDEFINED, resulting in a
SIGILL to userspace.
Given that, it's not a good idea to expose SW_INCR in sysfs. Hide it as
we did for CHAIN back in commit:
4ba2578fa7b55701 ("arm64: perf: don't expose CHAIN event in sysfs")
In current code, init_irq_stacks() will call cpu_to_node().
The cpu_to_node() depends on percpu "numa_node" which is initialized in:
arch_call_rest_init() --> rest_init() -- kernel_init()
--> kernel_init_freeable() --> smp_prepare_cpus()
But init_irq_stacks() is called in init_IRQ() which is before
arch_call_rest_init().
So in init_irq_stacks(), the cpu_to_node() does not work, it
always return 0. In NUMA, it makes the node 1 cpu accesses the IRQ stack which
is in the node 0.
This patch fixes it by:
1.) export the early_cpu_to_node(), and use it in the init_irq_stacks().
2.) change init_irq_stacks() to __init function.
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
__put_unaligned_be24() and friends use implicit casts to convert
larger-sized data to bytes, which trips sparse truncation warnings when
the argument is a constant:
CC [M] drivers/input/touchscreen/hynitron_cstxxx.o
CHECK drivers/input/touchscreen/hynitron_cstxxx.c
drivers/input/touchscreen/hynitron_cstxxx.c: note: in included file (through arch/x86/include/generated/asm/unaligned.h):
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (aa01a0 becomes a0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (aa01 becomes 1)
include/asm-generic/unaligned.h:119:16: warning: cast truncates bits from constant value (ab00d0 becomes d0)
include/asm-generic/unaligned.h:120:20: warning: cast truncates bits from constant value (ab00 becomes 0)
To avoid this let's mask off upper bits explicitly, the resulting code
should be exactly the same, but it will keep sparse happy.
Python 3.6 introduced a DeprecationWarning for invalid escape sequences.
This is upgraded to a SyntaxWarning in Python 3.12, and will eventually
be a syntax error.
Fix these now to get ahead of it before it's an error.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Message-ID: <20230912060801.95533-3-bgray@linux.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Justin Forbes <jforbes@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lockdep assertion in thermal_zone_trip_id() triggers when the
trip point sysfs attribute of a thermal instance is read, because
there is no thermal zone locking in that code path.
This is not verly useful, though, because there is no mechanism by which
the location of the trips[] table in a thermal zone or its size can
change after binding cooling devices to the trips in that thermal
zone and before those cooling devices are unbound from them. Thus
it is not in fact necessary to hold the thermal zone lock when
thermal_zone_trip_id() is called from trip_point_show() and so the
lockdep asserion in the former is invalid.
Accordingly, drop that lockdep assertion.
Fixes: 2c7b4bfadef0 ("thermal: core: Store trip pointer in struct thermal_instance") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Presently ia32 registers stored in ptregs are unconditionally cast to
unsigned int by the ia32 stub. They are then cast to long when passed to
__se_sys*, but will not be sign extended.
This takes the sign of the syscall argument into account in the ia32
stub. It still casts to unsigned int to avoid implementation specific
behavior. However then casts to int or unsigned int as necessary. So that
the following cast to long sign extends the value.
This fixes the io_pgetevents02 LTP test when compiled with -m32. Presently
the systemcall io_pgetevents_time64() unexpectedly accepts -1 for the
maximum number of events.
It doesn't appear other systemcalls with signed arguments are effected
because they all have compat variants defined and wired up.
Fixes: ebeb8c82ffaf ("syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Signed-off-by: Nikolay Borisov <nik.borisov@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240110130122.3836513-1-nik.borisov@suse.com Link: https://lore.kernel.org/ltp/20210921130127.24131-1-rpalethorpe@suse.com/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs
CPU hotplug") preserved total idle sleep time and iowait sleeptime across
CPU hotplug events.
Similar reasoning applies to the number of idle calls and idle sleeps to
get the proper average of sleep time per idle invocation.
Preserve those fields too.
Fixes: 71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug") Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240122233534.3094238-1-tim.c.chen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There have been reports of the watchdog marking clocksources unstable on
machines with 8 NUMA nodes:
clocksource: timekeeping watchdog on CPU373:
Marking clocksource 'tsc' as unstable because the skew is too large:
clocksource: 'hpet' wd_nsec: 14523447520
clocksource: 'tsc' cs_nsec: 14524115132
The measured clocksource skew - the absolute difference between cs_nsec
and wd_nsec - was 668 microseconds:
The kernel used 200 microseconds for the uncertainty_margin of both the
clocksource and watchdog, resulting in a threshold of 400 microseconds (the
md variable). Both the cs_nsec and the wd_nsec value indicate that the
readout interval was circa 14.5 seconds. The observed behaviour is that
watchdog checks failed for large readout intervals on 8 NUMA node
machines. This indicates that the size of the skew was directly proportinal
to the length of the readout interval on those machines. The measured
clocksource skew, 668 microseconds, was evaluated against a threshold (the
md variable) that is suited for readout intervals of roughly
WATCHDOG_INTERVAL, i.e. HZ >> 1, which is 0.5 second.
The intention of 2e27e793e280 ("clocksource: Reduce clocksource-skew
threshold") was to tighten the threshold for evaluating skew and set the
lower bound for the uncertainty_margin of clocksources to twice
WATCHDOG_MAX_SKEW. Later in c37e85c135ce ("clocksource: Loosen clocksource
watchdog constraints"), the WATCHDOG_MAX_SKEW constant was increased to
125 microseconds to fit the limit of NTP, which is able to use a
clocksource that suffers from up to 500 microseconds of skew per second.
Both the TSC and the HPET use default uncertainty_margin. When the
readout interval gets stretched the default uncertainty_margin is no
longer a suitable lower bound for evaluating skew - it imposes a limit
that is far stricter than the skew with which NTP can deal.
The root causes of the skew being directly proportinal to the length of
the readout interval are:
* the inaccuracy of the shift/mult pairs of clocksources and the watchdog
* the conversion to nanoseconds is imprecise for large readout intervals
Prevent this by skipping the current watchdog check if the readout
interval exceeds 2 * WATCHDOG_INTERVAL. Considering the maximum readout
interval of 2 * WATCHDOG_INTERVAL, the current default uncertainty margin
(of the TSC and HPET) corresponds to a limit on clocksource skew of 250
ppm (microseconds of skew per second). To keep the limit imposed by NTP
(500 microseconds of skew per second) for all possible readout intervals,
the margins would have to be scaled so that the threshold value is
proportional to the length of the actual readout interval.
As for why the readout interval may get stretched: Since the watchdog is
executed in softirq context the expiration of the watchdog timer can get
severely delayed on account of a ksoftirqd thread not getting to run in a
timely manner. Surely, a system with such belated softirq execution is not
working well and the scheduling issue should be looked into but the
clocksource watchdog should be able to deal with it accordingly.
If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting. This can cause an improper floating-point
environment after execve(). For example:
zsh% cat measure.c
#include <fenv.h>
int main() { return fetestexcept(FE_INEXACT); }
zsh% cc measure.c -o measure -lm
zsh% echo $((1.0/3)) # raising FE_INEXACT
0.33333333333333331
zsh% while ./measure; do ; done
(stopped in seconds)
Call lose_fpu(0) before setting fcr31 to prevent this.
Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/ Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling") Cc: stable@vger.kernel.org Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Creating a region with 16 memory devices caused a problem. The div_u64_rem
function, used for dividing an unsigned 64-bit number by a 32-bit one,
faced an issue when SZ_256M * p->interleave_ways. The result surpassed
the maximum limit of the 32-bit divisor (4G), leading to an overflow
and a remainder of 0.
note: At this point, p->interleave_ways is 16, meaning 16 * 256M = 4G
To fix this issue, I replaced the div_u64_rem function with div64_u64_rem
and adjusted the type of the remainder.
Signed-off-by: Quanquan Cao <caoqq@fujitsu.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Fixes: 23a22cd1c98b ("cxl/region: Allocate HPA capacity to regions") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FORCE_STOP_STATE bit is unsuitable to force the DSI link into LP-11
mode. It seems the bridge internally queues DSI packets and when the
FORCE_STOP_STATE bit is cleared, they are sent in close succession
without any useful timing (this also means that the DSI lanes won't go
into LP-11 mode). The length of this gibberish varies between 1ms and
5ms. This sometimes breaks an attached bridge (TI SN65DSI84 in this
case). In our case, the bridge will fail in about 1 per 500 reboots.
The FORCE_STOP_STATE handling was introduced to have the DSI lanes in
LP-11 state during the .pre_enable phase. But as it turns out, none of
this is needed at all. Between samsung_dsim_init() and
samsung_dsim_set_display_enable() the lanes are already in LP-11 mode.
The code as it was before commit 20c827683de0 ("drm: bridge:
samsung-dsim: Fix init during host transfer") and 0c14d3130654 ("drm:
bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec") was correct
in this regard.
This patch basically reverts both commits. It was tested on an i.MX8M
SoC with an SN65DSI84 bridge. The signals were probed and the DSI
packets were decoded during initialization and link start-up. After this
patch the first DSI packet on the link is a VSYNC packet and the timing
is correct.
Command mode between .pre_enable and .enable was also briefly tested by
a quick hack. There was no DSI link partner which would have responded,
but it was made sure the DSI packet was send on the link. As a side
note, the command mode seems to just work in HS mode. I couldn't find
that the bridge will handle commands in LP mode.
Lantiq uses a common kernel config for devices with 24Kc and 34Kc cores.
The changes made previously to add support for interrupts on all cores
work on 24Kc platforms with SMP disabled and 34Kc platforms with SMP
enabled. This patch fixes boot issues on Danube (single core 24Kc) with
SMP enabled.
Fixes: 730320fd770d ("MIPS: lantiq: enable all hardware interrupts on second VPE") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
In __spi_pump_transfer_message(), the message was not finalized in the
first error return as it is in the other error return paths. Not
finalizing the message could cause anything waiting on the message to
complete to hang forever.
This adds the missing call to spi_finalize_current_message().
Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A recent change moved the code that decides to skip
a channel or disable multichannel entirely, into a
helper function.
During this, a mutex_unlock of the session_mutex
should have been removed. Doing that here.
Fixes: f591062bdbf4 ("cifs: handle servers that still advertise multichannel after disabling") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the existing implementation, when executing interleaved write and read
operations in the ISR for a transfer length greater than the FIFO size,
the TXFIFO write precedes the RXFIFO read. Consequently, the initially
received data in the RXFIFO is pushed out and lost, leading to a failure
in data integrity. To address this issue, reverse the order of interleaved
operations and conduct the RXFIFO read followed by the TXFIFO write.
Fixes: 6afe2ae8dc48 ("spi: spi-cadence: Interleave write of TX and read of RX FIFO") Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Link: https://msgid.link/r/20231218090652.18403-1-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op()
call. This fixes SFDP parameter page read failures seen with parts that
now use SFDP protocol to read the basic flash parameter table.
Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Similar to commit 26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"). Add a mutex to ensure that aux transfer
won't race with atomic_disable by holding the PM reference and prevent
the bridge from suspend.
Also we need to use pm_runtime_put_sync_suspend() to suspend the bridge
instead of idle with pm_runtime_put_sync().
Fixes: 3203e497eb76 ("drm/bridge: anx7625: Synchronously run runtime suspend.") Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240118015916.2296741-1-hsinyi@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1a721de8489f ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") prevented all operations about partitions on disks
with GENHD_FL_NO_PART in blkpg_do_ioctl() since they are meaningless.
However, it changed error code in some scenarios. So move checking
GENHD_FL_NO_PART to bdev_add_partition() to eliminate impact.
Fixes: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART") Reported-by: Allison Karlitskaya <allison.karlitskaya@redhat.com> Closes: https://lore.kernel.org/all/CAOYeF9VsmqKMcQjo1k6YkGNujwN-nzfxY17N3F-CMikE1tYp+w@mail.gmail.com/ Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240118130401.792757-1-lilingfeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Turns out this "SoC" side controller does not support certain commands,
such as reading chip JEDEC ID, so the controller is pretty much unusable
in Linux. We should be using the "PCH" side controller instead. For this
reason remove this PCI ID from the list.
Fixes: c2912d42e86e ("spi: intel-pci: Add support for Meteor Lake-S SPI serial flash") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://msgid.link/r/20240122120034.2664812-2-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The raw interrupt status of eic maybe set before the interrupt is enabled,
since the eic interrupt has a latch function, which would trigger the
interrupt event once enabled it from user side. To solve this problem,
interrupts generated before setting the interrupt trigger type are ignored.
When storing opps by level or index use xa_insert() instead of xa_store()
and add error-checking to spot bad duplicates indexes possibly wrongly
provided by the platform firmware.
gcc rightfully complains about excessive stack usage in the fimd_win_set_pixfmt()
function:
drivers/gpu/drm/exynos/exynos_drm_fimd.c: In function 'fimd_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos_drm_fimd.c:750:1: error: the frame size of 1032 bytes is larger than 1024 byte
drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_win_set_pixfmt':
drivers/gpu/drm/exynos/exynos5433_drm_decon.c:381:1: error: the frame size of 1032 bytes is larger than 1024 bytes
There is really no reason to copy the large exynos_drm_plane
structure to the stack before using one of its members, so just
use a pointer instead.
After commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
nid of a reserved region is used by init_reserved_page() (with
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y) to access node strucure.
In many cases the nid of the reserved memory is not set and this causes
a crash.
When the nid of a reserved region is not set, fall back to
early_pfn_to_nid(), so that nid of the first_online_node will be passed
to init_reserved_page().
Fixes: 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Link: https://lore.kernel.org/r/20240118061853.2652295-1-yajun.deng@linux.dev
[rppt: massaged the commit message] Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit 26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"), if we hit the error case in
ps8640_aux_transfer() then we return without dropping the mutex. Fix
this oversight.
The ps8640 bridge seems to expect everything to be power cycled at the
disable process, but sometimes ps8640_aux_transfer() holds the runtime
PM reference and prevents the bridge from suspend.
Prevent that by introducing a mutex lock between ps8640_aux_transfer()
and .post_disable() to make sure the bridge is really powered off.
Fixes: 826cff3f7ebb ("drm/bridge: parade-ps8640: Enable runtime power management") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240109120528.1292601-1-treapking@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver never unregisters the audio codec platform device, which can
lead to a crash on module reloading, nor does it handle the return value
from sii902x_audio_codec_init().
- tidss probes, but is deferred as sii902x is still missing.
- sii902x starts probing and enters sii902x_init().
- sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from
DRM's perspective.
- sii902x calls sii902x_audio_codec_init() and
platform_device_register_data()
- The registration of the audio platform device causes probing of the
deferred devices.
- tidss probes, which eventually causes sii902x_bridge_get_edid() to be
called.
- sii902x_bridge_get_edid() tries to use the i2c to read the edid.
However, the sii902x driver has not set up the i2c part yet, leading
to the crash.
Fix this by moving the drm_bridge_add() to the end of the
sii902x_init(), which is also at the very end of sii902x_probe().
It turns out that I had misconfigured the device I was using the panel
with; the bus data polarity is not high for this panel, I had to change
the config on the display controller's side.
Fix the panel config to properly reflect its accurate settings.
Unlike what is claimed in commit f5aa7d46b0ee ("drm/bridge:
parade-ps8640: Provide wait_hpd_asserted() in struct drm_dp_aux"), if
someone manually tries to do an AUX transfer (like via `i2cdump ${bus}
0x50 i`) while the panel is off we don't just get a simple transfer
error. Instead, the whole ps8640 gets thrown for a loop and goes into
a bad state.
Let's put the function to wait for the HPD (and the magical 50 ms
after first reset) back in when we're doing an AUX transfer. This
shouldn't actually make things much slower (assuming the panel is on)
because we should immediately poll and see the HPD high. Mostly this
is just an extra i2c transfer to the bridge.
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
This needs to be set to 1 to avoid a potential deadlock in
the GC 10.x and newer. On GC 9.x and older, this needs
to be set to 0. This can lead to hangs in some mixed
graphics and compute workloads. Updated firmware is also
required for AQL.
Rename AUO 0x405c B116XAK01 to B116XAK01.0 and adjust the timing of
auo_b116xak01: T3=200, T12=500, T7_max = 50 according to decoding edid
and datasheet.
Fixes: da458286a5e2 ("drm/panel: Add support for AUO B116XAK01 panel") Cc: stable@vger.kernel.org Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-2-hsinyi@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
On HSW non-ULT (or at least on Dell Latitude E6540) external displays
start to flicker when we enable PSR on the eDP. We observe a much higher
SR and PC6 residency than should be possible with an external display,
and indeen much higher than what we observe with eDP disabled and
only the external display enabled. Looks like the hardware is somehow
ignoring the fact that the external display is active during PSR.
I wasn't able to redproduce this on my HSW ULT machine, or BDW.
So either there's something specific about this particular laptop
(eg. some unknown firmware thing) or the issue is limited to just
non-ULT HSW systems. All known registers that could affect this
look perfectly reasonable on the affected machine.
As a workaround let's unmask the LPSP event to prevent PSR entry
except while in LPSP mode (only pipe A + eDP active). This
will prevent PSR entry entirely when multiple pipes are active.
The one slight downside is that we now also prevent PSR entry
when driving eDP with pipe B or C, but I think that's a reasonable
tradeoff to avoid having to implement a more complex workaround.
Writing sequentially to a huge file on btrfs on a SMR HDD revealed a
decline of the performance (220 MiB/s to 30 MiB/s after 500 minutes).
The performance goes down because of increased latency of the extent
allocation, which is induced by a traversing of a lot of full block groups.
So, this patch optimizes the ffe_ctl->hint_byte by choosing a block group
with sufficient size from the active block group list, which does not
contain full block groups.
After applying the patch, the performance is maintained well.
Commit cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") changed
behavior to unconditionnaly set the THRI interrupt in sc16is7xx_tx_proc().
For example when sending a 65 bytes message, and assuming the Tx FIFO is
initially empty, sc16is7xx_handle_tx() will write the first 64 bytes of the
message to the FIFO and sc16is7xx_tx_proc() will then activate THRI. When
the THRI IRQ is fired, the driver will write the remaining byte of the
message to the FIFO, and disable THRI by calling sc16is7xx_stop_tx().
When sending a 2 bytes message, sc16is7xx_handle_tx() will write the 2
bytes of the message to the FIFO and call sc16is7xx_stop_tx(), disabling
THRI. After sc16is7xx_handle_tx() exits, control returns to
sc16is7xx_tx_proc() which will unconditionally set THRI. When the THRI IRQ
is fired, the driver simply acknowledges the interrupt and does nothing
more, since all the data has already been written to the FIFO. This results
in 2 register writes and 4 register reads all for nothing and taking
precious cycles from the I2C/SPI bus.
Fix this by enabling the THRI interrupt only when we fill the Tx FIFO to
its maximum capacity and there are remaining bytes to send in the message.
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
To avoid adding this functionality to all UART drivers, wrap the
spin_[un]lock*() invocations for uart_port::lock into helper functions
which just contain the spin_[un]lock*() invocations for now. In a
subsequent step these helpers will gain the console synchronization
mechanisms.
Converted with coccinelle. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-56-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9915753037eb ("serial: sc16is7xx: fix unconditional activation of THRI interrupt") Signed-off-by: Sasha Levin <sashal@kernel.org>
When a serial port is used for kernel console output, then all
modifications to the UART registers which are done from other contexts,
e.g. getty, termios, are interference points for the kernel console.
So far this has been ignored and the printk output is based on the
principle of hope. The rework of the console infrastructure which aims to
support threaded and atomic consoles, requires to mark sections which
modify the UART registers as unsafe. This allows the atomic write function
to make informed decisions and eventually to restore operational state. It
also allows to prevent the regular UART code from modifying UART registers
while printk output is in progress.
All modifications of UART registers are guarded by the UART port lock,
which provides an obvious synchronization point with the console
infrastructure.
Provide wrapper functions for spin_[un]lock*(port->lock) invocations so
that the console mechanics can be applied later on at a single place and
does not require to copy the same logic all over the drivers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20230914183831.587273-2-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9915753037eb ("serial: sc16is7xx: fix unconditional activation of THRI interrupt") Signed-off-by: Sasha Levin <sashal@kernel.org>
After analyzing the vmcore, I found this issue is caused by page migration.
The scenario is that, one thread is doing page migration, and we will use the
target page's ->mapping field to save 'anon_vma' pointer between page unmap and
page move, and now the target page is locked and refcount is 1.
Currently, there is another stress-ng thread performing memory hotplug,
attempting to offline the target page that is being migrated. It discovers that
the refcount of this target page is 1, preventing the offline operation, thus
proceeding to dump the page. However, page_mapping() of the target page may
return an incorrect file mapping to crash the system in dump_mapping(), since
the target page->mapping only saves 'anon_vma' pointer without setting
PAGE_MAPPING_ANON flag.
There are seveval ways to fix this issue:
(1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving
'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target
page has not built mappings yet.
(2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing
the system, however, there are still some PFN walkers that call page_mapping()
without holding the page lock, such as compaction.
(3) Using target page->private field to save the 'anon_vma' pointer and 2 bits
page state, just as page->mapping records an anonymous page, which can remove
the page_mapping() impact for PFN walkers and also seems a simple way.
So I choose option 3 to fix this issue, and this can also fix other potential
issues for PFN walkers, such as compaction.
Link: https://lkml.kernel.org/r/e60b17a88afc38cb32f84c3e30837ec70b343d2b.1702641709.git.baolin.wang@linux.alibaba.com Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Xu Yu <xuyu@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When doing compaction, I found the lru_add_drain() is an obvious hotspot
when migrating pages. The distribution of this hotspot is as follows:
- 18.75% compact_zone
- 17.39% migrate_pages
- 13.79% migrate_pages_batch
- 11.66% migrate_folio_move
- 7.02% lru_add_drain
+ 7.02% lru_add_drain_cpu
+ 3.00% move_to_new_folio
1.23% rmap_walk
+ 1.92% migrate_folio_unmap
+ 3.20% migrate_pages_sync
+ 0.90% isolate_migratepages
The lru_add_drain() was added by commit c3096e6782b7 ("mm/migrate:
__unmap_and_move() push good newpage to LRU") to drain the newpage to LRU
immediately, to help to build up the correct newpage->mlock_count in
remove_migration_ptes() for mlocked pages. However, if there are no
mlocked pages are migrating, then we can avoid this lru drain operation,
especailly for the heavy concurrent scenarios.
So we can record the source pages' mlocked status in
migrate_folio_unmap(), and only drain the lru list when the mlocked status
is set in migrate_folio_move().
In addition, the page was already isolated from lru when migrating, so
checking the mlocked status is stable by folio_test_mlocked() in
migrate_folio_unmap().
After this patch, I can see the hotpot of the lru_add_drain() is gone:
- 9.41% migrate_pages_batch
- 6.15% migrate_folio_move
- 3.64% move_to_new_folio
+ 1.80% migrate_folio_extra
+ 1.70% buffer_migrate_folio
+ 1.41% rmap_walk
+ 0.62% folio_add_lru
+ 3.07% migrate_folio_unmap
Commit 0952177f2a1f ("thermal/core/power_allocator: Update once
cooling devices when temp is low") adds an update flag to avoid
triggering a thermal event when there is no need, and the thermal
cdev is updated once when the temperature is low.
But when the trips are writable, and switch_on_temp is set to be a
higher value, the cooling device state may not be reset to 0,
because last_temperature is smaller than switch_on_temp.
For example:
First:
switch_on_temp=70 control_temp=85;
Then userspace change the trip_temp:
switch_on_temp=45 control_temp=55 cur_temp=54
Then userspace reset the trip_temp:
switch_on_temp=70 control_temp=85 cur_temp=57 last_temp=54
At this time, the cooling device state should be reset to 0.
However, because cur_temp(57) < switch_on_temp(70)
last_temp(54) < switch_on_temp(70) ----> update = false,
update is false, the cooling device state can not be reset.
Using the observation that tz->passive can also be regarded as the
temperature status, set the update flag to the tz->passive value.
When the temperature drops below switch_on for the first time, the
states of cooling devices can be reset once, and tz->passive is updated
to 0. In the next round, because tz->passive is 0, cdev->state will not
be updated.
By using the tz->passive value as the "update" flag, the issue above
can be solved, and the cooling devices can be updated only once when the
temperature is low.
Fixes: 0952177f2a1f ("thermal/core/power_allocator: Update once cooling devices when temp is low") Cc: 5.13+ <stable@vger.kernel.org> # 5.13+ Suggested-by: Wei Wang <wvw@google.com> Signed-off-by: Di Shen <di.shen@unisoc.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Replace the integer trip number stored in struct thermal_instance with
a pointer to the relevant trip and adjust the code using the structure
in question accordingly.
The main reason for making this change is to allow the trip point to
cooling device binding code more straightforward, as illustrated by
subsequent modifications of the ACPI thermal driver, but it also helps
to clarify the overall design and allows the governor code overhead to
be reduced (through subsequent modifications).
The only case in which it adds complexity is trip_point_show() that
needs to walk the trips[] table to find the index of the given trip
point, but this is not a critical path and the interface that
trip_point_show() belongs to is problematic anyway (for instance, it
doesn't cover the case when the same cooling devices is associated
with multiple trip points).
This is a preliminary change and the affected code will be refined by
a series of subsequent modifications of thermal governors, the core and
the ACPI thermal driver.
The general functionality is not expected to be affected by this change.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Stable-dep-of: e95fa7404716 ("thermal: gov_power_allocator: avoid inability to reset a cdev") Signed-off-by: Sasha Levin <sashal@kernel.org>
It is invalid to call for_each_thermal_trip() on an unregistered thermal
zone anyway, and as per thermal_zone_device_register_with_trips(), the
trips[] table must be present if num_trips is greater than zero for the
given thermal zone.
Hence, the trips check in for_each_thermal_trip() is redundant and so it
can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Stable-dep-of: e95fa7404716 ("thermal: gov_power_allocator: avoid inability to reset a cdev") Signed-off-by: Sasha Levin <sashal@kernel.org>
The conversion to CCI also converted the multi-byte register access to
big-endian. Correct the register definition by using the correct
little-endian ones.
Fixes: af73323b9770 ("media: imx290: Convert to new CCI register access helpers") Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed the Fixes: tag.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some sensors, e.g. Sony IMX290, are using little-endian registers. Add
support for those by encoding the endianness into Bit 20 of the register
address.
Fixes: af73323b9770 ("media: imx290: Convert to new CCI register access helpers") Cc: stable@vger.kernel.org Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed commit message.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c73be61cede5 ("pipe: Add general notification queue support") a
regression was introduced that would lock up resized pipes under certain
conditions. See the reproducer in [1].
The commit resizing the pipe ring size was moved to a different
function, doing that moved the wakeup for pipe->wr_wait before actually
raising pipe->max_usage. If a pipe was full before the resize occured it
would result in the wakeup never actually triggering pipe_write.
Set @max_usage and @nr_accounted before waking writers if this isn't a
watch queue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212295 Link: https://lore.kernel.org/r/20231201-orchideen-modewelt-e009de4562c6@brauner Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reviewed-by: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Lukas Schauer <lukas@schauer.dev>
[Christian Brauner <brauner@kernel.org>: rewrite to account for watch queues] Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This declutters the code by reducing the number of #ifdefs and makes
the watch_queue checks simpler. This has no runtime effect; the
machine code is identical.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-2-max.kellermann@ionos.com> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: e95aada4cb93 ("pipe: wakeup wr_wait after setting max_usage") Signed-off-by: Sasha Levin <sashal@kernel.org>
The kernel allocates a memory buffer and provides its location to the
hardware, which uses it to update the HFI table. This allocation occurs
during boot and remains constant throughout runtime.
When resuming from hibernation, the restore kernel allocates a second
memory buffer and reprograms the HFI hardware with the new location as
part of a normal boot. The location of the second memory buffer may
differ from the one allocated by the image kernel.
When the restore kernel transfers control to the image kernel, its HFI
buffer becomes invalid, potentially leading to memory corruption if the
hardware writes to it (the hardware continues to use the buffer from the
restore kernel).
It is also possible that the hardware "forgets" the address of the memory
buffer when resuming from "deep" suspend. Memory corruption may also occur
in such a scenario.
To prevent the described memory corruption, disable HFI when preparing to
suspend or hibernate. Enable it when resuming.
Add syscore callbacks to handle the package of the boot CPU (packages of
non-boot CPUs are handled via CPU offline). Syscore ops always run on the
boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend
and hibernation. Syscore ops only run in these cases.
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+ Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Comment adjustment, subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In preparation to support hibernation, add functionality to disable an HFI
instance during CPU offline. The last CPU of an instance that goes offline
will disable such instance.
The Intel Software Development Manual states that the operating system must
wait for the hardware to set MSR_IA32_PACKAGE_THERM_STATUS[26] after
disabling an HFI instance to ensure that it will no longer write on the HFI
memory. Some processors, however, do not ever set such bit. Wait a minimum
of 2ms to give time hardware to complete any pending memory writes.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM") Signed-off-by: Sasha Levin <sashal@kernel.org>
In preparation for the addition of a suspend notifier, wrap the logic to
enable HFI and program its memory buffer into helper functions. Both the
CPU hotplug callback and the suspend notifier will use them.
This refactoring does not introduce functional changes.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM") Signed-off-by: Sasha Levin <sashal@kernel.org>
It was reported that there is a compiler warning on the unused variable
"sin_addr_len" in af_inet.c when CONFIG_CGROUP_BPF is not set.
This patch is to address it similar to the ipv6 counterpart
in inet6_getname(). It is to "return sin_addr_len;"
instead of "return sizeof(*sin);".
Fixes: fefba7d1ae19 ("bpf: Propagate modified uaddrlen from cgroup sockaddr programs") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/bpf/20231013185702.3993710-1-martin.lau@linux.dev Closes: https://lore.kernel.org/bpf/20231013114007.2fb09691@canb.auug.org.au/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Cc: stable@vger.kernel.org Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The power source flag should be updated when
[1] System receives an interrupt indicating that the power source
has changed.
[2] System resumes from suspend or runtime suspend
Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc'
was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc'
NULL pointer check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903)
[Why]
For usb4 connector, AUX transaction is handled by dmub utilizing a differnt
code path comparing to legacy DP connector. If the usb4 DP connector is
disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev
fail.
[How]
Align the error code with the one reported by legacy DP as EIO.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.
[How]
Port the DCN35 fixes to DCN314.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In edp_setup_replay(), 'struct dc *dc' & 'struct dmub_replay *replay'
was dereferenced before the pointer 'link' & 'replay' NULL check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:947 edp_setup_replay() warn: variable dereferenced before check 'link' (see line 933)
The i2c_master_send/recv() functions return negative error codes or
they return "len" on success. So the error handling here can be written
as just normal checks for "if (ret < 0) return ret;". No need to
complicate things.
Btw, in this code the "len" parameter can never be zero, but even if
it were, then I feel like this would still be the best way to write it.
Fixes: 914437992876 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking") Suggested-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/04242630-42d8-4920-8c67-24ac9db6b3c9@moroto.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When screen brightness is rapidly changed and PSR-SU is enabled the
display hangs on panels with this TCON even on the latest DCN 3.1.4
microcode (0x8002a81 at this time).
This was disabled previously as commit 072030b17830 ("drm/amd: Disable
PSR-SU on Parade 0803 TCON") but reverted as commit 1e66a17ce546 ("Revert
"drm/amd: Disable PSR-SU on Parade 0803 TCON"") in favor of testing for
a new enough microcode (commit cd2e31a9ab93 ("drm/amd/display: Set minimum
requirement for using PSR-SU on Phoenix")).
As hangs are still happening specifically with this TCON, disable PSR-SU
again for it until it can be root caused.
Cc: stable@vger.kernel.org Cc: aaron.ma@canonical.com Cc: binli@gnome.org Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2046131 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IGT `amdgpu/amd_color/crtc-lut-accuracy` fails right at the beginning of
the test execution, during atomic check, because DC rejects the
bandwidth state for a fb sizing 64x64. The test was previously working
with the deprecated dc_commit_state(). Now using
dc_validate_with_context() approach, the atomic check needs to perform a
full state validation. Therefore, set fast_validation to false in the
dc_validate_global_state call for atomic check.
Cc: stable@vger.kernel.org Fixes: b8272241ff9d ("drm/amd/display: Drop dc_commit_state in favor of dc_commit_streams") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
