Simon McVittie [Thu, 11 Aug 2011 10:02:40 +0000 (11:02 +0100)]
Don't build any of the reload-pipe code on non-Unix
In commit ab7b3f9, Ralf notes that handle_reload_watch() is (in principle)
cross-platform. However, there's no way to trigger it on Windows, because
nothing ever writes to the pipe. Make the entire pipe-to-self trick
Unix-specific instead.
Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=40002
Chris Mayo [Mon, 15 Aug 2011 09:23:04 +0000 (10:23 +0100)]
Install diagrams in htmldir
diagram.png and diagram.svg are linked from dbus-tutorial.html but recent
changes to doc/Makefile.am mean that if htmldir is set with configure they are
installed such that the relative link from dbus-tutorial.html does not work.
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Ralf Habacker [Fri, 5 Aug 2011 21:52:49 +0000 (23:52 +0200)]
Reduce duplicates from authors list
Some duplicates are there by accident mostly because of the git
learning curve (as in my case). Other duplicates could be outdated
and may be candidates for additional mappings.
Simon McVittie [Wed, 29 Jun 2011 16:29:16 +0000 (17:29 +0100)]
_dbus_server_new_for_domain_socket: don't try to unlink abstract sockets
Our abstract socket names look like filenames (/tmp/dbus-MwozdykBNK or
whatever), so if we incorrectly unlink the abstract socket name, in
highly unlikely circumstances we could accidentally unlink a non-abstract
socket belonging to another process!
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=38656 Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Simon McVittie [Wed, 29 Jun 2011 15:44:33 +0000 (16:44 +0100)]
bus signal_handler: call _exit in the unlikely event that the pipe is full or invalid
On OSs with abstract sockets, this is close enough. On OSs without
abstract sockets, this results in failing to clean up Unix sockets
in /tmp if someone has sent us thousands of SIGHUP signals since we
last entered the main loop - I think that's acceptable.
The reload pipe should never get closed, but if it is for some reason,
we want a SIGTERM after that to cause an exit too.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=38656 Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Simon McVittie [Wed, 27 Jul 2011 14:59:53 +0000 (15:59 +0100)]
cmake: always enable GNU and recent-POSIX extensions, like autoconf does
If the C library is (e)glibc, this allows use of POSIX, BSD, SVID, GNU,
etc., extensions to ISO C, regardless of using -ansi or not.
Not doing this broke the cmake build on Linux since commit 18b08180,
which added AC_USE_SYSTEM_EXTENSIONS to configure.ac (and removed
_GNU_SOURCE from files that use it) without also updating the cmake
build system. SO_PEERCRED is defined unconditionally, but struct ucred
is considered to be a GNU extension, so can't be used under _GNU_SOURCE.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=29228 Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
activation: add /lib/dbus-1/system-services to the search path for services
In order to allow D-Bus usage during early boot (where /usr is not
accessible) also search for bus activation files in
/lib/dbus-1/system-services/. This is only a first step in the right
direction, before we really can boot without /usr we'd need to move all
current activation files (or possibly replace
/usr/dbus-1/system-services to a symlink to
/lib/dbus-1/system-services).
Simon McVittie [Tue, 14 Jun 2011 09:10:24 +0000 (10:10 +0100)]
man pages: replace all unescaped hyphen/minus characters with \-
In a man page, "-" officially means a typographical (Unicode) hyphen,
which frequently breaks the ability to copy and paste code examples from
a man page. "\-" means the ASCII hyphen/minus character. See
<http://lintian.debian.org/tags/hyphen-used-as-minus-sign.html> for
more details.
Rather than trying to distinguish between hyphens, em-dashes and
hyphen/minus, I just replaced all ambiguous hyphens with \- by applying
this vim command repeatedly until it didn't find anything:
%s/\(^\|[^\\]\)-/\1\\-/g
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=38284 Reviewed-by: Lennart Poettering <lennart@poettering.net>
Simon McVittie [Wed, 15 Jun 2011 11:43:15 +0000 (12:43 +0100)]
Use EXEEXT when running tests from another directory, and skip bus-test-launch-helper on non-Unix
This is necessary when cross-compiling from Linux to mingw32 and running
the resulting tests under Wine. (This partially works! Some tests fail,
though.)
Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Simon McVittie [Mon, 6 Jun 2011 15:12:05 +0000 (16:12 +0100)]
Build docs after running tests, and remove redundant DIST_SUBDIRS
If DIST_SUBDIRS isn't set, it defaults to SUBDIRS, so it's just noise.
Running tests before building documentation is an easy way to speed up the
hack/make check/fix cycle, by not wasting time rebuilding the
documentation (which is often slow) until all the tests compile and pass.
https://bugs.freedesktop.org/show_bug.cgi?id=34405 Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Simon McVittie [Wed, 22 Jun 2011 10:59:32 +0000 (11:59 +0100)]
_dbus_connect_tcp_socket_with_nonce: don't create an extra fd (which is then leaked)
This block should have been deleted in 2007, when IPv6 support was added:
previously, the fd allocated at the beginning of the function was used
for connect(), but for IPv6 support, the socket() call has to be inside
the loop over getaddrinfo() results so its address family can be changed.
Jiří Klimeš [Fri, 1 Jul 2011 10:58:11 +0000 (12:58 +0200)]
DBusConnection: use DBUS_ERROR_OBJECT_PATH_IN_USE instead of DBUS_ERROR_ADDRESS_IN_USE
While registering an object path the possible error is
DBUS_ERROR_OBJECT_PATH_IN_USE, not DBUS_ERROR_ADDRESS_IN_USE (the error
is set by _dbus_object_tree_register()).
Signed-off-by: Jiří Klimeš <jklimes@redhat.com> Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=38874
Simon McVittie [Fri, 10 Jun 2011 16:38:14 +0000 (17:38 +0100)]
Add and use DBUS_TIMEOUT_INFINITE and DBUS_TIMEOUT_USE_DEFAULT
The documentation claimed that INT_MAX (whatever that means) meant the
default, but the value that has actually always been checked for is
0x7fffffff (aka INT32_MAX on the competent platforms we sadly don't
restrict our portability to), so we should use that. (In practice D-Bus
probably never worked on platforms where int wasn't 32 bits, though.)
Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=34570
Simon McVittie [Tue, 22 Feb 2011 13:43:18 +0000 (13:43 +0000)]
Test nonce-tcp transport
Regression test for https://bugs.freedesktop.org/show_bug.cgi?id=34569
Reviewed-by: David Zeuthen <davidz@redhat.com> Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=34570
Simon McVittie [Tue, 22 Feb 2011 11:43:11 +0000 (11:43 +0000)]
Add support for building "modular" tests, which require GLib and dbus-glib
For the moment, the CMake build system only knows about the existing
"embedded tests"; make it define both symbols, though.
We use GLib because it has GTester (and life's too short to write yet another
JUnit clone), and dbus-glib for the main-loop integration only (see
fd.o #31515 for thoughts on incorporating just those two functions in a
separate library in the dbus tarball).
I'm not using DBusLoop for the main loop because I specifically don't
want to use non-public API or ABI of libdbus in the modular tests. If we make
sure they work against a shared libdbus, we can use them to test the
installed system, with "make installcheck".
Reviewed-by: Will Thompson <will.thompson@collabora.co.uk>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=34570
projects / thirdparty / dbus.git / log
