syzbot reported that act_len in kalmia_send_init_packet() is
uninitialized when passing it to the first usb_bulk_msg error path. Jiri
Pirko noted that it's pointless to pass it in the error path, and that
the value that would be printed in the second error path would be the
value of act_len from the first call to usb_bulk_msg.[1]
With this in mind, let's just not pass act_len to the usb_bulk_msg error
paths.
Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.
We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.
Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.
The imperfect hash area can be updated while packets are traversing,
which will cause a use-after-free when 'tcf_exts_exec()' is called
with the destroyed tcf_ext.
CPU 0: CPU 1:
tcindex_set_parms tcindex_classify
tcindex_lookup
tcindex_lookup
tcf_exts_change
tcf_exts_exec [UAF]
Stop operating on the shared area directly, by using a local copy,
and update the filter with 'rcu_replace_pointer()'. Delete the old
filter version only after a rcu grace period elapsed.
Fixes: 9b0d4446b569 ("net: sched: avoid atomic swap in tcf_exts_change") Reported-by: valis <sec@valis.email> Suggested-by: valis <sec@valis.email> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230209143739.279867-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an
interrupt. The process of servicing this interrupt involves flushing all
pending RX DMA descriptors and clearing the teardown completion marker
(TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX
NAPI callback services the interrupt. Thus, it is necessary to wait for
this handler to run, drain all packets and clear TDCM, before calling
napi_disable() in am65_cpsw_nuss_common_stop() function post channel
teardown. If napi_disable() executes before ensuring that TDCM is
cleared, the TDCM remains set when the interfaces are down, resulting in
an interrupt storm when the interfaces are brought up again.
Since the interrupt raised to indicate the RX DMA Channel teardown is
specific to the AM62x and AM64x SoCs, add a quirk for it.
Fixes: 4f7cce272403 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g") Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230209084432.189222-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were
incorrectly unified. Chip package values are not unique and cannot be
checked independently. They are meaningful only in a context of a given
chip.
Packages BCM5358 and BCM47188 share the same value but then belong to
different chips. Code unification resulted in treating BCM5358 as
BCM47188 and broke its initialization.
Link: https://github.com/openwrt/openwrt/issues/8278 Fixes: cb1b0f90acfe ("net: ethernet: bgmac: unify code of the same family") Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.
Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently I encountered one case where I cannot increase the MTU size
directly from 1500 to a much bigger value with XDP enabled if the
server is equipped with IXGBE card, which happened on thousands of
servers in production environment. After applying the current patch,
we can set the maximum MTU size to 3K.
This patch follows the behavior of changing MTU as i40e/ice does.
References:
[1] commit 23b44513c3e6 ("ice: allow 3k MTU for XDP")
[2] commit 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When converting net_device_stats to rtnl_link_stats64 sign extension
is triggered on ILP32 machines as 6c1c509778 changed the previous
"ulong -> u64" conversion to "long -> u64" by accessing the
net_device_stats fields through a (signed) atomic_long_t.
This causes for example the received bytes counter to jump to 16EiB after
having received 2^31 bytes. Casting the atomic value to "unsigned long"
beforehand converting it into u64 avoids this.
Fixes: 6c1c5097781f ("net: add atomic_long_t to net_device_stats fields") Signed-off-by: Felix Riemann <felix.riemann@sma.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pages being freed by memblock_free_late() have already been
initialized, but if they are in the deferred init range,
__free_one_page() might access nearby uninitialized pages when trying to
coalesce buddies. This can, for example, trigger this BUG:
BUG: unable to handle page fault for address: ffffe964c02580c8
RIP: 0010:__list_del_entry_valid+0x3f/0x70
<TASK>
__free_one_page+0x139/0x410
__free_pages_ok+0x21d/0x450
memblock_free_late+0x8c/0xb9
efi_free_boot_services+0x16b/0x25c
efi_enter_virtual_mode+0x403/0x446
start_kernel+0x678/0x714
secondary_startup_64_no_verify+0xd2/0xdb
</TASK>
A proper fix will be more involved so revert this change for the time
being.
Fixes: 115d9d77bb0f ("mm: Always release pages to the buddy allocator in memblock_free_late().") Signed-off-by: Aaron Thompson <dev@aaront.org> Link: https://lore.kernel.org/r/20230207082151.1303-1-dev@aaront.org Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a crash is encountered when kmemleak starts to scan the list of gray
or allocated objects that it maintains. Upon closer inspection, it was
observed that these page-faults always occurred when kmemleak attempted
to scan a CMA region.
At the moment, kmemleak is made aware of CMA regions that are specified
through the devicetree to be dynamically allocated within a range of
addresses. However, kmemleak should not need to scan CMA regions or any
reserved memory region, as those regions can be used for DMA transfers
between drivers and peripherals, and thus wouldn't contain anything
useful for kmemleak.
Additionally, since CMA regions are unmapped from the kernel's address
space when they are freed to the buddy allocator at boot when
CONFIG_DEBUG_PAGEALLOC is enabled, kmemleak shouldn't attempt to access
those memory regions, as that will trigger a crash. Thus, kmemleak
should ignore all dynamically allocated reserved memory regions.
This patch (of 1):
Currently, kmemleak ignores dynamically allocated reserved memory regions
that don't have a kernel mapping. However, regions that do retain a
kernel mapping (e.g. CMA regions) do get scanned by kmemleak.
This is not ideal for two reasons:
1 kmemleak works by scanning memory regions for pointers to allocated
objects to determine if those objects have been leaked or not.
However, reserved memory regions can be used between drivers and
peripherals for DMA transfers, and thus, would not contain pointers to
allocated objects, making it unnecessary for kmemleak to scan these
reserved memory regions.
2 When CONFIG_DEBUG_PAGEALLOC is enabled, along with kmemleak, the
CMA reserved memory regions are unmapped from the kernel's address
space when they are freed to buddy at boot. These CMA reserved regions
are still tracked by kmemleak, however, and when kmemleak attempts to
scan them, a crash will happen, as accessing the CMA region will result
in a page-fault, since the regions are unmapped.
Thus, use kmemleak_ignore_phys() for all dynamically allocated reserved
memory regions, instead of those that do not have a kernel mapping
associated with them.
Link: https://lkml.kernel.org/r/20230208232001.2052777-1-isaacmanjarres@google.com Link: https://lkml.kernel.org/r/20230208232001.2052777-2-isaacmanjarres@google.com Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private") Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Kirill A. Shutemov <kirill.shtuemov@linux.intel.com> Cc: Nick Kossifidis <mick@ics.forth.gr> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Rob Herring <robh@kernel.org> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Saravana Kannan <saravanak@google.com> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls. This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size. The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure. Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:
1UL << page_size_log
Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63. This is fine on 64 bit architectures where a long is 64
bits. However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior. This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.
Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.
Fix by comparing page_size_log to BITS_PER_LONG before doing shift.
Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/ Fixes: 42d7395feb56 ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Sasha Levin <sashal@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a non-root cgroup gets removed when there is a thread that registered
trigger and is polling on a pressure file within the cgroup, the polling
waitqueue gets freed in the following path:
The fundamental problem here is that cgroup_file_release() (and
consequently waitqueue's lifetime) is not tied to the file's real lifetime.
Using wake_up_pollfree() here might be less than ideal, but it is in line
with the comment at commit 42288cb44c4b ("wait: add wake_up_pollfree()")
since the waitqueue's lifetime is not tied to file's one and can be
considered as another special case. While this would be fixable by somehow
making cgroup_file_release() be tied to the fput(), it would require
sizable refactoring at cgroups or higher layer which might be more
justifiable if we identify more cases like this.
BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x60/0xc0
Write of size 4 at addr ffff88810e625328 by task a.out/4404
If mmc_add_host() fails, it doesn't need to call mmc_remove_host(),
or it will cause null-ptr-deref, because of deleting a not added
device in mmc_remove_host().
To fix this, goto label 'fail_glue_init', if mmc_add_host() fails,
and change the label 'fail_add_host' to 'fail_gpiod_request'.
If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can
not release the resources, because the sdio function is not presented
in these two cases, it won't call of_node_put() or put_device().
To fix these leaks, make sdio_func_present() only control whether
device_del() needs to be called or not, then always call of_node_put()
and put_device().
In error case in sdio_init_func(), the reference of 'card->dev' is
not get, to avoid redundant put in sdio_free_func_cis(), move the
get_device() to sdio_alloc_func() and put_device() to sdio_release_func(),
it can keep the get/put function be balanced.
Without this patch, while doing fault inject test, it can get the
following leak reports, after this fix, the leak is gone.
When we backport dadd0dcaa67d ("net/ulp: prevent ULP without clone op from
entering the LISTEN status"), we have accidentally backported a part of 7a7160edf1bf ("net: Return errno in sk->sk_prot->get_port().") and removed
err = -EADDRINUSE in inet_csk_listen_start().
Thus, listen() no longer returns -EADDRINUSE even if ->get_port() failed
as reported in [0].
We set -EADDRINUSE to err just before ->get_port() to fix the regression.
By default when the system is configured for low power idle in the FADT
the keyboard is set up as a wake source. This matches the behavior that
Windows uses for Modern Standby as well.
It has been reported that a variety of AMD based designs there are
spurious wakeups are happening where two IRQ sources are active.
For example:
```
PM: Triggering wakeup from IRQ 9
PM: Triggering wakeup from IRQ 1
```
In these designs IRQ 9 is the ACPI SCI and IRQ 1 is the keyboard.
One way to trigger this problem is to suspend the laptop and then unplug
the AC adapter. The SOC will be in a hardware sleep state and plugging
in the AC adapter returns control to the kernel's s2idle loop.
Normally if just IRQ 9 was active the s2idle loop would advance any EC
transactions and no other IRQ being active would cause the s2idle loop
to put the SOC back into hardware sleep state.
When this bug occurred IRQ 1 is also active even if no keyboard activity
occurred. This causes the s2idle loop to break and the system to wake.
This is a platform firmware bug triggering IRQ1 without keyboard activity.
This occurs in Windows as well, but Windows will enter "SW DRIPS" and
then with no activity enters back into "HW DRIPS" (hardware sleep state).
This issue affects Renoir, Lucienne, Cezanne, and Barcelo platforms. It
does not happen on newer systems such as Mendocino or Rembrandt.
It's been fixed in newer platform firmware. To avoid triggering the bug
on older systems check the SMU F/W version and adjust the policy at suspend
time for s2idle wakeup from keyboard on these systems. A lot of thought
and experimentation has been given around the timing of disabling IRQ1,
and to make it work the "suspend" PM callback is restored.
Yellow carp has been outputting versions like `1093.24.0`, but this
is supposed to be 69.24.0. That is the MSB is being interpreted
incorrectly.
The MSB is not part of the major version, but has generally been
treated that way thus far. It's actually the program, and used to
distinguish between two programs from a similar family but different
codebase.
The amd_pmc_get_smu_version() and amd_pmc_idlemask_read() functions are
used in the probe / suspend/resume code, so they are also used when
CONFIG_DEBUGFS is disabled, move them outside of the #ifdef CONFIG_DEBUGFS
block.
Note this purely moves the code to above the #ifdef CONFIG_DEBUGFS,
the code is completely unchanged.
Fixes: f6045de1f532 ("platform/x86: amd-pmc: Export Idlemask values based on the APU") Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Cc: Sanket Goswami <Sanket.Goswami@amd.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IdleMask is the metric used by the PM firmware to know the status of each
of the Hardware IP blocks monitored by the PM firmware.
Knowing this value is key to get the information of s2idle suspend/resume
status. This value is mapped to PMC scratch registers, retrieve them
accordingly based on the CPU family and the underlying firmware support.
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20210916124002.2529-1-Sanket.Goswami@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e4a0d3e720e7 ("aio: Make it possible to remap aio ring") introduced
a null-deref if mremap is called on an old aio mapping after fork as
mm->ioctx_table will be set to NULL.
[jmoyer@redhat.com: fix 80 column issue] Link: https://lkml.kernel.org/r/x49sffq4nvg.fsf@segfault.boston.devel.redhat.com Fixes: e4a0d3e720e7 ("aio: Make it possible to remap aio ring") Signed-off-by: Seth Jenkins <sethjenkins@google.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Jann Horn <jannh@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the peer closes all the existing subflows for a given
mptcp socket and later the application closes it, the current
implementation let it survive until the timewait timeout expires.
While the above is allowed by the protocol specification it
consumes resources for almost no reason and additionally
causes sporadic self-tests failures.
Let's move the mptcp socket to the TCP_CLOSE state when there are
no alive subflows at close time, so that the allocated resources
will be freed immediately.
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent patch to improve btree cycle checking caused a regression
when I rebased the in-memory btree branch atop the 5.19 for-next branch,
because in-memory short-pointer btrees do not have AG numbers. This
produced the following complaint from kmemleak:
I noticed that xfs_btree_insrec has a bunch of debug code that return
out of the function immediately, without freeing the "new" btree cursor
that can be returned when _make_block_unfull calls xfs_btree_split. Fix
the error return in this function to free the btree cursor.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
xfs/434 and xfs/436 have been reporting occasional memory leaks of
xfs_dquot objects. These tests themselves were the messenger, not the
culprit, since they unload the xfs module, which trips the slub
debugging code while tearing down all the xfs slab caches:
=============================================================================
BUG xfs_dquot (Tainted: G W ): Objects remaining in xfs_dquot on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffffea000606de00 objects=30 used=5 fp=0xffff888181b78a78 flags=0x17ff80000010200(slab|head|node=0|zone=2|lastcpupid=0xfff)
CPU: 0 PID: 3953166 Comm: modprobe Tainted: G W 5.18.0-rc6-djwx #rc6 d5824be9e46a2393677bda868f9b154d917ca6a7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Since we don't generally rmmod the xfs module between fstests, this
means that xfs/434 is really just the canary in the coal mine --
something leaked a dquot, but we don't know who. After days of pounding
on fstests with kmemleak enabled, I finally got it to spit this out:
Now we know that quotacheck is at fault, but even this report was
canaryish -- it was triggered by xfs/494, which doesn't actually mount
any filesystems. (kmemleak can be a little slow to notice leaks, even
with fstests repeatedly whacking it to look for them.) Looking at the
*previous* fstest, however, showed that the test run before xfs/494 was
xfs/117. The tipoff to the problem is in this excerpt from dmesg:
The dinode verifier decided that the inode was corrupt, which causes
iget to return with EFSCORRUPTED. Since this happened during
quotacheck, it is obvious that the kernel aborted the inode walk on
account of the corruption error and disabled quotas. Unfortunately, we
neglect to purge the dquot cache before doing that, which is how the
dquots leaked.
The problems started 10 years ago in commit b84a3a, when the dquot lists
were converted to a radix tree, but the error handling behavior was not
correctly preserved -- in that commit, if the bulkstat failed and
usrquota was enabled, the bulkstat failure code would be overwritten by
the result of flushing all the dquots to disk. As long as that
succeeds, we'd continue the quota mount as if everything were ok, but
instead we're now operating with a corrupt inode and incorrect quota
usage counts. I didn't notice this bug in 2019 when I wrote commit ebd126a, which changed quotacheck to skip the dqflush when the scan
doesn't complete due to inode walk failures.
Introduced-by: b84a3a96751f ("xfs: remove the per-filesystem list of dquots") Fixes: ebd126a651f8 ("xfs: convert quotacheck to use the new iwalk functions") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The problem was that an allocation failed unexpectedly in
xfs_bmbt_alloc_block() after roughly 150,000 minlen allocation error
injections, resulting in an EFSCORRUPTED error being returned to
xfs_bmapi_write(). The error occurred on extent-to-btree format
conversion allocating the new root block:
Why the allocation failed at this point is unknown, but is likely
that we ran the transaction out of reserved space and filesystem out
of space with bmbt blocks because of all the minlen allocations
being done causing worst case fragmentation of a large allocation.
Regardless of the cause, we've then called xfs_bmapi_finish() which
calls xfs_btree_del_cursor(cur, error) to tear down the cursor.
So we have a failed operation, error != 0, cur->bc_ino.allocated > 0
and the filesystem is still up. The assert fails to take into
account that allocation can fail with an error and the transaction
teardown will shut the filesystem down if necessary. i.e. the
assert needs to check "|| error != 0" as well, because at this point
shutdown is pending because the current transaction is dirty....
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Not fatal, the assert is there to catch developer attention. I'm
seeing this occasionally during recoveryloop testing after a
shutdown, and I don't want this to stop an overnight recoveryloop
run as it is currently doing.
Convert the ASSERT to a XFS_IS_CORRUPT() check so it will dump a
corruption report into the log and cause a test failure that way,
but it won't stop the machine dead.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit dc04db2aa7c9 has caused a small aim7 regression, showing a
small increase in CPU usage in __xfs_btree_check_sblock() as a
result of the extra checking.
This is likely due to the endian conversion of the sibling poitners
being unconditional instead of relying on the compiler to endian
convert the NULL pointer at compile time and avoiding the runtime
conversion for this common case.
Rework the checks so that endian conversion of the sibling pointers
is only done if they are not null as the original code did.
.... and these need to be "inline" because the compiler completely
fails to inline them automatically like it should be doing.
$ size fs/xfs/libxfs/xfs_btree.o*
text data bss dec hex filename
51874 240 0 52114 cb92 fs/xfs/libxfs/xfs_btree.o.orig
51562 240 0 51802 ca5a fs/xfs/libxfs/xfs_btree.o.inline
Just when you think the tools have advanced sufficiently we don't
have to care about stuff like this anymore, along comes a reminder
that *our tools still suck*.
Fixes: dc04db2aa7c9 ("xfs: detect self referencing btree sibling pointers") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We don't check that the v4 feature flags taht v5 requires to be set
are actually set anywhere. Do this check when we see that the
filesystem is a v5 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While xfs_has_nlink() is not used in kernel, it is used in userspace
(e.g. by xfs_db) so we need to set the XFS_FEAT_NLINK flag correctly
in xfs_sb_version_to_features().
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
To catch the obvious graph cycle problem and hence potential endless
looping.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ever since we added shadown format buffers to the log items, log
items need to handle the item being released with shadow buffers
attached. Due to the fact this requirement was added at the same
time we added new rmap/reflink intents, we missed the cleanup of
those items.
In theory, this means shadow buffers can be leaked in a very small
window when a shutdown is initiated. Testing with KASAN shows this
leak does not happen in practice - we haven't identified a single
leak in several years of shutdown testing since ~v4.8 kernels.
However, the intent whiteout cleanup mechanism results in every
cancelled intent in exactly the same state as this tiny race window
creates and so if intents down clean up shadow buffers on final
release we will leak the shadow buffer for just about every intent
we create.
Hence we start with this patch to close this condition off and
ensure that when whiteouts start to be used we don't leak lots of
memory.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we first allocate or resize an inline inode fork, we round up
the allocation to 4 byte alingment to make journal alignment
constraints. We don't clear the unused bytes, so we can copy up to
three uninitialised bytes into the journal. Zero those bytes so we
only ever copy zeros into the journal.
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter points out that the return code was not set in commit 60c8b4aebd8e ("nvmem: core: fix cleanup after dev_set_name()"), but
this is not the only issue - we also need to zero wp_gpio to prevent
gpiod_put() being called on an error value.
Fixes: 560181d3ace6 ("nvmem: core: fix cleanup after dev_set_name()") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The i.MX6 CPU frequency driver sometimes fails to register at boot time
due to nvmem_cell_read_u32() sporadically returning -ENOENT.
This happens because there is a window where __nvmem_device_get() in
of_nvmem_cell_get() is able to return the nvmem device, but as cells
have been setup, nvmem_find_cell_entry_by_node() returns NULL.
The occurs because the nvmem core registration code violates one of the
fundamental principles of kernel programming: do not publish data
structures before their setup is complete.
Fix this by making nvmem core code conform with this principle.
Fixes: eace75cfdcf7 ("nvmem: Add a simple NVMEM framework for nvmem providers") Cc: stable@vger.kernel.org Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
put this. While a minimal fix for this would be to add the gpiod_put()
call, we can do better if we split device_register(), and use the
tested nvmem_release() cleanup code by initialising the device early,
and putting the device.
This results in a slightly larger fix, but results in clear code.
Note: this patch depends on "nvmem: core: initialise nvmem->id early"
and "nvmem: core: remove nvmem_config wp_gpio".
Fixes: 5544e90c8126 ("nvmem: core: add error handling for dev_set_name") Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[Srini: Fixed subject line and error code handing with wp_gpio while applying.] Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230127104015.23839-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ab3428cfd9aa ("nvmem: core: fix registration vs use race") Signed-off-by: Sasha Levin <sashal@kernel.org>
The type of return value of dev_set_name is int, which may return
wrong result, so we add error handling for it to reclaim memory
of nvmem resource, and return early when an error occurs.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ab3428cfd9aa ("nvmem: core: fix registration vs use race") Signed-off-by: Sasha Levin <sashal@kernel.org>
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
As part of nvmet_fc_ls_create_association there is a case where
nvmet_fc_alloc_target_queue fails right after a new association with an
admin queue is created. In this case, no one releases the get taken in
nvmet_fc_alloc_target_assoc. This fix is adding the missing put.
Signed-off-by: Amit Engel <Amit.Engel@dell.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Historically calls to __decompress() didn't specify "out_len" parameter
on many architectures including s390, expecting that no writes beyond
uncompressed kernel image are performed. This has changed since commit 2aa14b1ab2c4 ("zstd: import usptream v1.5.2") which includes zstd library
commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer
(#2751)"). Now zstd decompression code might store literal buffer in
the unwritten portion of the destination buffer. Since "out_len" is
not set, it is considered to be unlimited and hence free to use for
optimization needs. On s390 this might corrupt initrd or ipl report
which are often placed right after the decompressor buffer. Luckily the
size of uncompressed kernel image is already known to the decompressor,
so to avoid the problem simply specify it in the "out_len" parameter.
Starting from Turing, the driver is no longer responsible for initiating
DEVINIT when required as the GPU started loading a FW image from ROM and
executing DEVINIT itself after power-on.
However - we apparently still need to wait for it to complete.
This should correct some issues with runpm on some systems, where we get
control of the HW before it's been fully reinitialised after resume from
suspend.
Currently in phy_init_eee() the driver unconditionally configures the PHY
to stop RX_CLK after entering Rx LPI state. This causes an LPI interrupt
storm on my qcs404-base board.
Change the PHY initialization so that for "qcom,qcs404-ethqos" compatible
device RX_CLK continues to run even in Rx LPI state.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If you call listen() and accept() on an already connect()ed
rose socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and rose_accept() dequeues
the skb waiting in the sk->sk_receive_queue.
This creates a child socket with the sk of the parent
rose socket, which can cause confusion.
Fix rose_listen() to return -EINVAL if the socket has
already been successfully connected, and add lock_sock
to prevent this issue.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230125105944.GA133314@ubuntu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
While looking through legacy platform data users, I noticed that
the DT probing never uses data from the DT properties, as the
platform_data structure gets overwritten directly after it
is initialized.
There have never been any boards defining the platform_data in
the mainline kernel either, so this driver so far only worked
with patched kernels or with the default values.
For the benefit of possible downstream users, fix the DT probe
by no longer overwriting the data.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230126162203.2986339-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
sock_map proto callbacks should never call themselves by design. Protect
against bugs like [1] and break out of the recursive loop to avoid a stack
overflow in favor of a resource leak.
Several functions that take part in codec's initialization and removal
are re-used by ASoC codec drivers implementations. Drivers mimic the
behavior of hda_codec_driver_probe/remove() found in
sound/pci/hda/hda_bind.c with their component->probe/remove() instead.
One of the reasons for that is the expectation of
snd_hda_codec_device_new() to receive a valid pointer to an instance of
struct snd_card. This expectation can be met only once sound card
components probing commences.
As ASoC sound card may be unbound without codec device being actually
removed from the system, unsetting ->preset in
snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load
scenario causing null-ptr-deref. Preset is assigned only once, during
device/driver matching whereas ASoC codec driver's module reloading may
occur several times throughout the lifetime of an audio stack.
The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.
To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.
Link: https://github.com/thesofproject/linux/issues/4083 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20230119163459.2235843-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.
To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.
Link: https://github.com/thesofproject/linux/issues/4083 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20230119163459.2235843-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currenty the latest thing run during a suspend to idle attempt is
the LPS0 `prepare_late` callback and the earliest thing is the
`resume_early` callback.
There is a desire for the `amd-pmc` driver to suspend later in the
suspend process (ideally the very last thing), so create a callback
that it or any other driver can hook into to do this.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220317141445.6498-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") Signed-off-by: Sasha Levin <sashal@kernel.org>
This clean up the error/notification messages in kprobes related code.
Basically this defines 'pr_fmt()' macros for each files and update
the messages which describes
- what happened,
- what is the kernel going to do or not do,
- is the kernel fine,
- what can the user do about it.
Also, if the message is not needed (e.g. the function returns unique
error code, or other error message is already shown.) remove it,
and replace the message with WARN_*() macros if suitable.
For consistency, in mptcp_pm_nl_create_listen_socket(), we need to
call the __mptcp_nmpc_socket() under the msk socket lock.
Note that as a side effect, mptcp_subflow_create_socket() needs a
'nested' lockdep annotation, as it will acquire the subflow (kernel)
socket lock under the in-kernel listener msk socket lock.
The current lack of locking is almost harmless, because the relevant
socket is not exposed to the user space, but in future we will add
more complexity to the mentioned helper, let's play safe.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
By default, KVM/SVM will intercept attempts by the guest to transition
out of C0. However, the KVM_CAP_X86_DISABLE_EXITS capability can be used
by a VMM to change this behavior. To mitigate the cross-thread return
address predictions bug (X86_BUG_SMT_RSB), a VMM must not be allowed to
override the default behavior to intercept C0 transitions.
Use a module parameter to control the mitigation on processors that are
vulnerable to X86_BUG_SMT_RSB. If the processor is vulnerable to the
X86_BUG_SMT_RSB bug and the module parameter is set to mitigate the bug,
KVM will not allow the disabling of the HLT, MWAIT and CSTATE exits.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4019348b5e07148eb4d593380a5f6713b93c9a16.1675956146.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain AMD processors are vulnerable to a cross-thread return address
predictions bug. When running in SMT mode and one of the sibling threads
transitions out of C0 state, the other sibling thread could use return
target predictions from the sibling thread that transitioned out of C0.
The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM to
prevent exiting guest mode when transitioning out of C0. A guest could
act maliciously in this situation, so create a new x86 BUG that can be
used to detect if the processor is vulnerable.
Turns out modern (icl+) VBTs still declare their DSI ports
as MIPI-A and MIPI-C despite the PHYs now being A and B.
Remap appropriately to allow the panels declared as MIPI-C
to work.
Currently amdgpu calls drm_sched_fini() from the fence driver sw fini
routine - such function is expected to be called only after the
respective init function - drm_sched_init() - was executed successfully.
Happens that we faced a driver probe failure in the Steam Deck
recently, and the function drm_sched_fini() was called even without
its counter-part had been previously called, causing the following oops:
To prevent that, check if the drm_sched was properly initialized for a
given ring before calling its fini counter-part.
Notice ideally we'd use sched.ready for that; such field is set as the latest
thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such
field - in the above oops for example, it was a GFX ring causing the crash, and
the sched.ready field was set to true in the ring init routine, regardless of
the state of the DRM scheduler. Hence, we ended-up using sched.ops as per
Christian's suggestion [0], and also removed the no_scheduler check [1].
When we upgraded our kernel, we started seeing some page corruption like
the following consistently:
BUG: Bad page state in process ganesha.nfsd pfn:1304ca
page:0000000022261c55 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x1304ca
flags: 0x17ffffc0000000()
raw: 0017ffffc0000000ffff8a513ffd4c98ffffeee24b35ec080000000000000000
raw: 0000000000000000000000000000000100000000ffffff7f0000000000000000
page dumped because: nonzero mapcount
CPU: 0 PID: 15567 Comm: ganesha.nfsd Kdump: loaded Tainted: P B O 5.10.158-1.nutanix.20221209.el7.x86_64 #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
Call Trace:
dump_stack+0x74/0x96
bad_page.cold+0x63/0x94
check_new_page_bad+0x6d/0x80
rmqueue+0x46e/0x970
get_page_from_freelist+0xcb/0x3f0
? _cond_resched+0x19/0x40
__alloc_pages_nodemask+0x164/0x300
alloc_pages_current+0x87/0xf0
skb_page_frag_refill+0x84/0x110
...
Sometimes, it would also show up as corruption in the free list pointer
and cause crashes.
After bisecting the issue, we found the issue started from commit e320d3012d25 ("mm/page_alloc.c: fix freeing non-compound pages"):
if (put_page_testzero(page))
free_the_page(page, order);
else if (!PageHead(page))
while (order-- > 0)
free_the_page(page + (1 << order), order);
So the problem is the check PageHead is racy because at this point we
already dropped our reference to the page. So even if we came in with
compound page, the page can already be freed and PageHead can return
false and we will end up freeing all the tail pages causing double free.
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
If the deadline of T1 is updated before the call to update_prio(), and the
new deadline is greater than the deadline of the second top waiter, then
after the requeue, T1 is no longer the top waiter, and the wrong task is
woken up which will then go back to sleep because it is not the top waiter.
This can be reproduced in PREEMPT_RT with stress-ng:
while true; do
stress-ng --sched deadline --sched-period 1000000000 \
--sched-runtime 800000000 --sched-deadline \ 1000000000 --mmapfork 23 -t 20
done
A similar issue was pointed out by Thomas versus the cases where the top
waiter drops out early due to a signal or timeout, which is a general issue
for all regular rtmutex use cases, e.g. futex.
The problematic code is in rt_mutex_adjust_prio_chain():
// Save the top waiter before dequeue/enqueue
prerequeue_top_waiter = rt_mutex_top_waiter(lock);
// Lock has no owner?
if (!rt_mutex_owner(lock)) {
// Top waiter changed
----> if (prerequeue_top_waiter != rt_mutex_top_waiter(lock))
----> wake_up_state(waiter->task, waiter->wake_state);
This only takes the case into account where @waiter is the new top waiter
due to the requeue operation.
But it fails to handle the case where @waiter is not longer the top
waiter due to the requeue operation.
Ensure that the new top waiter is woken up so in all cases so it can take
over the ownerless lock.
The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.
Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c.
Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt") Cc: stable@vger.kernel.org # v5.14+ Reported-by: Sachin Sant <sachinp@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 588a513d3425 ("arm64: Fix race condition on PG_dcache_clean
in __sync_icache_dcache()"), we found RISC-V has the same issue as the
previous arm64. The previous implementation didn't guarantee the correct
sequence of operations, which means flush_icache_all() hasn't been
called when the PG_dcache_clean was set. That would cause a risk of page
synchronization.
Fixes: 08f051eda33b ("RISC-V: Flush I$ when making a dirty page executable") Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230127035306.1819561-1-guoren@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- The inner loop had a '(m > m_max)' condition, and the value of 'm'
would increase in each iteration;
- Each iteration would actually multiply 'm' by two, so it is not needed
to re-compute the whole equation at each iteration;
- It would loop until (m & 1) == 0, which means it would loop at most
once.
- The outer loop would divide the 'n' value by two at the end of each
iteration. This meant that for a 12 MHz parent clock and a 1.2 GHz
requested clock, it would first try n=12, then n=6, then n=3, then
n=1, none of which would work; the only valid value is n=2 in this
case.
Simplify this algorithm with a single for loop, which decrements 'n'
after each iteration, addressing all of the above problems.
Fixes: bdbfc029374f ("clk: ingenic: Add support for the JZ4760") Cc: <stable@vger.kernel.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20221214123704.7305-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While checking Pin Assignments of the port and partner during probe, we
don't take into account whether the peripheral is a plug or receptacle.
This manifests itself in a mode entry failure on certain docks and
dongles with captive cables. For instance, the Startech.com Type-C to DP
dongle (Model #CDP2DP) advertises its DP VDO as 0x405. This would fail
the Pin Assignment compatibility check, despite it supporting
Pin Assignment C as a UFP.
Update the check to use the correct DP Pin Assign macros that
take the peripheral's receptacle bit into account.
The Alcor Link AK9563 smartcard reader used on some Lenovo platforms
doesn't work. If LPM is enabled the reader will provide an invalid
usb config descriptor. Added quirk to disable LPM.
Verified fix on Lenovo P16 G1 and T14 G3
Tested-by: Miroslav Zatko <mzatko@mirexoft.com> Tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: stable@vger.kernel.org Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20230208181223.1092654-1-mpearson-lenovo@squebb.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have this check to make sure we don't accidentally add older devices
that may have disappeared and re-appeared with an older generation from
being added to an fs_devices (such as a replace source device). This
makes sense, we don't want stale disks in our file system. However for
single disks this doesn't really make sense.
I've seen this in testing, but I was provided a reproducer from a
project that builds btrfs images on loopback devices. The loopback
device gets cached with the new generation, and then if it is re-used to
generate a new file system we'll fail to mount it because the new fs is
"older" than what we have in cache.
Fix this by freeing the cache when closing the device for a single device
filesystem. This will ensure that the mount command passed device path is
scanned successfully during the next mount.
CC: stable@vger.kernel.org # 5.10+ Reported-by: Daan De Meyer <daandemeyer@fb.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the subflow error report callback unconditionally
propagates the fallback subflow status to the owning msk.
If the msk is already orphaned, the above prevents the code
from correctly tracking the msk moving to the TCP_CLOSE state
and doing the appropriate cleanup.
All the above causes increasing memory usage over time and
sporadic self-tests failures.
There is a great deal of infrastructure trying to propagate
correctly the fallback subflow status to the owning mptcp socket,
e.g. via mptcp_subflow_eof() and subflow_sched_work_if_closed():
in the error propagation path we need only to cope with unorphaned
sockets.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/339 Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write. In modern kernels this error provokes a WARNING:
Last potentially related work creation:
kasan_save_stack+0x22/0x50
__kasan_record_aux_stack+0x95/0xb0
insert_work+0x2b/0x130
__queue_work+0x1fe/0x660
queue_work_on+0x4b/0x60
smb2_readv_callback+0x396/0x800
cifs_abort_connection+0x474/0x6a0
cifs_reconnect+0x5cb/0xa50
cifs_readv_from_socket.cold+0x22/0x6c
cifs_read_page_from_socket+0xc1/0x100
readpages_fill_pages.cold+0x2f/0x46
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
The following function calls will cause UAF of the rdata pointer.
readpages_fill_pages
cifs_read_page_from_socket
cifs_readv_from_socket
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->callback() --> smb2_readv_callback
queue_work(&rdata->work) # if the worker completes first,
# the rdata is freed
cifs_readv_complete
kref_put
cifs_readdata_release
kfree(rdata)
return rdata->... # UAF in readpages_fill_pages()
Similarly, this problem also occurs in the uncache_fill_pages().
Fix this by adjusts the order of condition judgment in the return
statement.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Cc: stable@vger.kernel.org Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to using the u16 type in the min_t() macros the SPI transfer length
will be cast to word before participating in the conditional statement
implied by the macro. Thus if the transfer length is greater than 64KB the
Tx/Rx FIFO threshold level value will be determined by the leftover of the
truncated after the type-case length. In the worst case it will cause the
dramatical performance drop due to the "Tx FIFO Empty" or "Rx FIFO Full"
interrupts triggered on each xfer word sent/received to/from the bus.
The problem can be easily fixed by specifying the unsigned int type in the
min_t() macros thus preventing the possible data loss.
Fixes: ea11370fffdf ("spi: dw: get TX level without an additional variable") Reported-by: Sergey Nazarov <Sergey.Nazarov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230113185942.2516-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Added checking of pointer "function" in pcs_set_mux().
pinmux_generic_get_function() can return NULL and the pointer
"function" was dereferenced without checking against NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions") Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221118104332.943-1-korotkov.maxim.s@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The drive adjustment register definition of gpio13 and gpio81 is wrong:
"the start address for the range" of gpio18 is corrected to 0x000,
"the start bit for the first register within the range" of gpio81 is
corrected to 24.
When handling error path, ret needs to be set to correct value.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Fixes: d29d41e28eea ("ASoC: topology: Add support for multiple kcontrol types to a widget") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230207210428.2076354-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When running kfence_test, I found some testcases failed like this:
# test_out_of_bounds_read: EXPECTATION FAILED at mm/kfence/kfence_test.c:346
Expected report_matches(&expect) to be true, but is false
not ok 1 - test_out_of_bounds_read
The corresponding call-trace is:
BUG: KFENCE: out-of-bounds read in kunit_try_run_case+0x38/0x84
Out-of-bounds read at 0x(____ptrval____) (32B right of kfence-#10):
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
The kfence_test using the first frame of call trace to check whether the
testcase is succeed or not. Commit 6a00ef449370 ("riscv: eliminate
unreliable __builtin_frame_address(1)") skip first frame for all
case, which results the kfence_test failed. Indeed, we only need to skip
the first frame for case (task==NULL || task==current).
With this patch, the call-trace will be:
BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0x88/0x19e
Out-of-bounds read at 0x(____ptrval____) (1B left of kfence-#7):
test_out_of_bounds_read+0x88/0x19e
kunit_try_run_case+0x38/0x84
kunit_generic_run_threadfn_adapter+0x12/0x1e
kthread+0xc8/0xde
ret_from_exception+0x0/0xc
Fixes: 6a00ef449370 ("riscv: eliminate unreliable __builtin_frame_address(1)") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Tested-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221207025038.1022045-1-liushixin2@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This loop accidentally reuses the "i" iterator for both the inside and
the outside loop. The value of MAX_STREAM_BUFFER is 5. I believe that
chip->rmh.stat_len is in the 2-12 range. If the value of .stat_len is
4 or more then it will loop exactly one time, but if it's less then it
is a forever loop.
It looks like it was supposed to combined into one loop where
conditions are checked.
rds_rm_zerocopy_callback() uses list_entry() on the head of a list
causing a type confusion.
Use list_first_entry() to actually access the first element of the
rs_zcookie_queue list.
Fixes: 9426bbc6de99 ("rds: use list structure to track information for zerocopy completion notification") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.it Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On some platforms, 100/1000/2500 speeds seem to have sometimes problems
reporting false positive tx unit hang during stressful UDP traffic. Likely
other Intel drivers introduce responses to a tx hang. Update the 'tx hang'
comparator with the comparison of the head and tail of ring pointers and
restore the tx_timeout_factor to the previous value (one).
This can be test by using netperf or iperf3 applications.
Example:
iperf3 -s -p 5001
iperf3 -c 192.168.0.2 --udp -p 5001 --time 600 -b 0
Currently, remove and reload flows can run in parallel to module cleanup.
This design is error prone. For example: aux_drivers callbacks are called
from both cleanup and remove flows with different lockings, which can
cause a deadlock[1].
Hence, serialize module cleanup with reload and remove.
When tracer is reloaded, the device will log the traces at the
beginning of the log buffer. Also, driver is reading the log buffer in
chunks in accordance to the consumer index.
Hence, zero consumer index when reloading the tracer.
Whenever the driver is reading the string DBs into buffers, the driver
is setting the load bit, but the driver never clears this bit.
As a result, in case load bit is on and the driver query the device for
new string DBs, the driver won't read again the string DBs.
Fix it by clearing the load bit when query the device for new string
DBs.
Fixes: 2d69356752ff ("net/mlx5: Add support for fw live patch event") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
ethtool is returning an error for unknown speeds for the IPoIB interface:
$ ethtool ib0
netlink error: failed to retrieve link settings
netlink error: Invalid argument
netlink error: failed to retrieve link settings
netlink error: Invalid argument
Settings for ib0:
Link detected: no
After this change, ethtool will return success and show "unknown speed":
$ ethtool ib0
Settings for ib0:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: no
Fixes: eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
SWITCHDEV_FDB_ADD_TO_BRIDGE event handler that updates FDB entry 'lastuse'
field is only executed for eswitch that owns the entry. However, if peer
entry processed packets at least once it will have hardware counter 'used'
value greater than entry 'lastuse' from that point on, which will cause FDB
entry not being aged out.
projects / thirdparty / kernel / stable.git / log
